锂离子电池锡基合金体系负极研究

综述了锂离子电池锡基金属间化合物和复合物负极的研究进展。介绍了锡基合金体系作锂离子电池负极的优势, 指出了锡金属负极的不足，提出了采用锡基合金及其复合物是克服锡金属负极主体材料尺寸稳定问题的解决办法。概述了各种锡基合金和其复合物的结构、电化学性能、相应的加工方法和某些反应机理，总结了这些材料的优点和缺点，提出了改进这些材料性能的一些建议，如采用分散形态的纳米颗粒结构或用非晶合金并控制形态结构的转变，着重指出多相锡基锂合金复合物是最有前景的负极材料。     

锂离子电池薄膜锡负极材料的制备及容量衰减机理研究

以电镀的方法在铜基底上沉积薄膜锡作为锂离子电池负极材料. 运用X射线衍射、扫描电镜、电化学循环伏安、电化学充放电和交流阻抗等多种方法对其结构和性能进行表征和研究. 结果表明所制备的薄膜锡电极主要为四方晶系结构, 其初始放电(嵌锂)容量为709 mAh•g^－1, 充电(脱锂)容量为561 mAh•g^－1. 电化学循环伏安研究发现在嵌/脱锂过程中薄膜锡经历了多种相变过程. 电化学阻抗谱结果说明, 首次嵌锂过程中当电极电位达到1.2 V在电极表面形成SEI膜, 而当电极电位低于0.4 V表面SEI膜出现破裂, 归因于体积膨胀所致. SEM研究表明30次充放电循环后薄膜锡负极出现龟裂现象.     

锂离子电池高比容量FeSn_2-C复合负极材料的合成与性能

Sn基合金负极材料具有高达990 mAh·g-1的理论比容量,但其也存在因脱嵌锂过程发生巨大的体积变化而导致循环性能较差的问题.本文以Sn、Fe、石墨为原料利用简易的高能球磨法成功制备了具有核壳结构的FeSn2-C复合物,系统研究了球磨时间、FeSn2相含量对材料物相结构及电化学性能的影响,并分析了电极的失效机理.研究表明,球磨时间的增加有利于FeSn2金属间化合物相的形成及材料颗粒的细化,进而有利于材料比容量的增加及循环性能的提升;FeSn2相含量的增加能够提高FeSn2-C材料的比容量,但会降低FeSn2-C电极的循环稳定性.经工艺优化及组分调节,球磨24 h合成的Sn20Fe10C70材料具有最优的电化学性能,材料的比容量在540mAh·g-1左右,并能稳定循环100次,是一种非常有发展前途的锂离子电池高比容量负极材料.     

磷烯包覆的高性能硅基锂离子电池负极材料（英文）

硅基锂离子负极材料在脱嵌锂离子的过程中显著的体积效应导致活性材料的粉化、固体电解质介面膜(SEI)的持续生长和电接触的丧失并最终导致电池的失效。本文报道了一种新型的磷烯(单层黑磷)包覆来提升硅基负极材料的电化学性能。微量(1%,质量分数)的磷烯包覆有效抑制了被包覆硅颗粒的体积膨胀和SEI生长等问题,并保持了其电极结构在持续充放电循环中的完整性,从而提升了其库伦效率、容量以及循环稳定性。这是首次利用磷烯包覆法来提升硅基锂离子电池负极材料电化学性能的报道,而且也展现了此工艺在其他具有显著体积效应的电池材料中具有应用前景。     

石墨烯复合材料在锂离子电池中的研究进展

石墨烯复合材料因其独特的结构和优异的性质被认为是最有潜力的锂离子电池负极材料之一.石墨烯基复合材料是解决充放电过程中的电极体积变化导致电池的循环性能变差这一问题的有效途径.本文作者综述了多种石墨烯基复合材料作为锂离子电池负极时的电化学性能,并展望了未来的研究方向.     

高性能锂离子电池用N掺杂C-Sn交联纳米纤维自支撑电极的理性设计（英文）

为了提高碳材料作为锂离子电池负极材料的比容量,将氮掺杂的碳纤维与高容量的Sn进行复合。通过静电纺丝及低温碳化制备了均匀镶嵌Sn纳米颗粒的氮掺杂碳纳米纤维(C-Sn)复合膜。该复合膜直接用作自支撑锂离子电池负极时表现出较好的电化学性能,Sn的引入显著提高了碳纳米纤维膜的电化学性能。碳均匀包覆Sn后形成的纤维结构可以促进离子电子的传导,并能有效缓冲Sn纳米粒子在循环过程中的体积变化,从而有效抑制粉化与团聚。Sn含量约为25.6%的CSn-2电极具有最高的比容量和更优异的倍率性能。电化学测试结果表明,在2A·g^-1的电流密度下,充放电循环1000圈后充电(放电)比容量为412.7(413.5)mAh·g^-1。密度泛函理论(DFT)计算结果表明,N掺杂非晶碳与锂具有良好的亲和性,有利于将合金化反应之后形成的Sn_xLi_y合金锚定在碳表面,进而缓解了充放电过程中的Sn的体积变化。本文为高性能储锂材料的设计提供了一种切实可行的策略。     

Fe2O3锂离子电池负极材料研究进展

Fe2O3锂离子电池负极材料因其具有的高能量密度而备受关注。但Fe2O3电极材料存在的如低导电性、充/放电过程中体积改变导致的循环稳定性差等问题限制其实际应用。介绍了高比表面积、结构稳定以及储锂动力学等因素对锂离子电池负极材料电化学性能的重要影响,综述电极活性材料纳米化、形貌控制和杂原子掺杂对Fe2O3负极材料电化学性能改善的相关研究进展,最后对Fe2O3电极材料的发展前景进行了展望。     

锂离子电池用纳米Sn/SnSb合金三维复合负极的制备及性能

采用多步电沉积法制备的三维多孔铜箔作为集流体、低温液相化学还原法制备的纳米Sn/SnSb 合金作为负极材料, 制备出一种新型三维多孔结构的纳米Sn/SnSb合金复合负极. 通过与普通负极电化学性能的对比实验发现, 这种新型三维复合负极具有如下优点: 三维多孔网络结构提高了负极活性材料与集流体之间的结合力, 使不含粘结剂电极的制备成为可能; 有效缓解了高容量负极活性材料在充放电过程中的体积膨胀, 提高了负极活性材料的循环性能, 当循环到第30周时, 普通负极剩余容量为初始容量的33%, 而三维复合负极剩余容量为初始容量的41%; 三维铜箔集流体的特殊结构为高容量负极活性材料提供了一个良好的导电环境, 使电极反应进行得更加完全, 从而获得了更高的电极比容量, 普通负极初始容量为480 mAh·g-1, 而三维复合负极达到了800 mAh·g-1. 纳米Sn/SnSb合金三维复合负极良好的电化学性能为锂离子电池负极结构的设计开发提供了新的思路.     

结构可控的炭基材料在锂离子电池中的应用

为了满足人们对高性能锂离子电池的需求,对电极材料进行结构设计和表面改性非常重要。基于炭材料独特的优势,通过使用炭材料或是制备炭基复合物能够极大地提高锂离子电池的电化学性能。基于本实验室的研究基础,本文总结了炭基材料在锂离子电池应用领域所发挥的重要作用,综述了炭材料和炭基复合材料作为锂离子电极材料的研究进展,着重阐述了通过引入炭材料和控制材料结构来提高电池电化学性能。在炭负极材料方面,主要概述了新型炭负极材料(碳纳米管、石墨烯和无定形炭)的各种形貌结构对电 化学性能的影响及各自的优缺点。在含炭复合电极材料方面,详细介绍了正负极复合材料的制备方法、结构设计、形貌控制及复合物中炭对于提高正负极活性材料的导电性和结构稳定性所发挥的积极作用。最后,对于炭基材料在锂离子电池领域需要解决的问题进行了探讨,以期提高锂离子电池的应用性能。     

锂离子电池负极材料铜锌锡硫纳米颗粒的制备及其电化学性能

以金属氯化物为金属源,硫脲为硫源,聚乙二醇和乙二醇为混合溶剂,采用溶剂热法一步合成了球形的铜锌锡硫纳米颗粒.利用X射线衍射仪(XRD),扫描电子显微镜(SEM)和透射电子显微镜(TEM)分析了铜锌锡硫纳米颗粒的物相、结构、形貌;利用电池测试系统对以铜锌锡硫纳米颗粒为锂离子电池负极材料组装的锂离子电池的电化学性能进行了测试.结果表明:所得到的产物为具有锌黄锡矿结构的纯相铜锌锡硫,颗粒直径在300～500nm.铜锌锡硫纳米颗粒作为锂离子电池的负极材料具有较好的稳定性,有望在锂离子电池研究和应用中得到推广.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.