聚合物复合物层层组装膜

层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.聚合物复合物是基于各种分子间弱相互作用力而形成的超分子聚集体,其种类包括聚阳离子-聚阴离子复合物、聚电解质-有机小分子复合物、中性聚合物-聚合物复合物以及聚合物-无机杂化复合物等.在本文中,以作者的研究结果为基础,阐明聚合物复合物的层层组装是一种方便、快捷的功能复合膜的构筑方法,具有如下优点:(1)聚合物复合物大的尺度可以实现聚合物复合物层层组装膜的快速构筑;(2)聚合物复合物的结构在组装溶液中和成膜后都容易调控,方便聚合物复合物层层组装膜结构的精细调控.(3)聚合物复合物层层组装膜可以构筑非复合的聚合物层层组装所不能获得的膜结构及功能.     

表面印迹交替层状组装薄膜

在简要概述非常规交替层状组装这一进展后,重点总结了如何利用非常规交替层状组装以实现表面印迹膜的制备.模板分子与聚电解质在溶液中组装形成超分子复合物,然后以此超分子复合物为构筑基元,与感光性高分子,如重氮树脂,通过常规交替层状组装形成聚合物多层膜.利用聚合物多层膜之间的光化学反应形成稳定的多层膜,然后去除模板分子得到分子...     

塑料表面载银微凝胶层层组装膜的制备及抗菌活性

以载银聚烯丙基胺盐酸盐-葡聚糖微凝胶与聚苯乙烯磺酸钠为构筑基元,利用层层组装技术制备了一种可直接沉积在疏水的塑料基底表面的载银抗菌微凝胶膜. 研究结果表明,该载银抗菌微凝胶膜具有很好的抗菌能力,并且其抗菌活性可以通过控制载银微凝胶膜的组装层数方便地进行调控. 这种制备在塑料表面的载银抗菌微凝胶膜具有良好的稳定性和基底粘附力,能够保障其长效抗菌的实现.     

导尿管表面具有抗菌功能的层层组装微凝胶膜

以化学交联的聚烯丙基胺盐酸盐拟葡聚糖微凝胶和透明质酸为构筑基元,在导尿管表面层层组装构筑了厚度小于500 nm可控释放抗菌药物的聚合物微凝胶膜。 广谱抗菌药物头孢曲松钠通过扩散吸附的方法在2 min内快速负载到聚合物微凝胶膜中,并且在生理盐水中可控释放时间达3 h。 抗菌实验表明,组装有层层组装微凝胶膜并负载广谱抗菌药物的导尿管具有令人满意的抗菌效果,避免感染的发生。     

表面活性剂胶束实现疏水分子在聚合物微凝胶层层组装膜中的高效负载

基于层层组装技术制备了聚烯丙基胺-葡聚糖微凝胶(记作PAH-D)/透明质酸钠(HA)膜, 将包覆有芘分子的十二烷基硫酸钠(SDS)表面活性剂胶束基于静电作用力负载到PAH-D/HA微凝胶膜中, 实现了疏水分子芘在微凝胶膜中的高效负载. 紫外-可见吸收光谱和荧光光谱证实了SDS胶束包覆的芘分子被稳定地负载在PAH-D微凝胶膜中. 透过光谱表明负载有芘分子的(PAH-D/HA)*10微凝胶膜在可见光区仍保持良好光学透过性. 芘在膜中的负载量可以通过改变PAH-D/HA微凝胶膜的沉积周期数和SDS胶束中包覆芘分子的浓度而实现调控. 具有光致变色性质的螺吡喃分子同样可以借助SDS胶束负载到PAH-D/HA微凝胶膜中, 制备具有光致变色性质的层层组装膜. 本工作为疏水有机分子在层层组装聚合物膜中的高效负载提供了一种简便、易行的方法.     

TiO2/十六烷基三甲基溴化铵有序交替层状纳米复合薄膜的制备与结构表征

近年来有序交替的层状纳米结构薄膜的制备吸引了研究者们的极大关注. 目前, 这类薄膜的制备方法研究得最多的是LB技术[1～3]、基于化学吸附的自组装成膜技术[4,5]和交替沉积组装技术[6～8]. 但这几种方法都有明显的缺陷[9,10], 其中,通过LB技术制备有序交替层状纳米复合薄膜需要昂贵的仪器, 而且由于层间是分子相互作用, 膜的稳定性较差; 基于化学吸附的自组装成膜技术由于需要高反应活性的分子和特殊的基底表面, 并且由于化学反应的产率很难达到100%, 因此通过这种方法制备结构有序的多层膜并不容易; 利用交替沉积的方法制备出具有实用厚度的纳米多层膜需要耗费大量的时间. 最近, 出现了一种称为蒸发诱导的超分子自组装方法, 由这种方法制备的纳米多层膜具有成膜速度快和膜有序度高等优点, 此外还可以通过改变成膜物质浓度和拉膜速度来控制薄膜的厚度, 但与LB膜相比其厚度无法在分子水平上控制. 利用这种方法制备多层膜目前的文献报道仅限于线形SiO2与有机物的组装[10～13]. 本文利用这种方法制备了TiO2/十六烷基三甲基溴化铵纳米复合薄膜并对其结构进行了表征, 结果表明所制备的薄膜具有TiO2/十六烷基三甲基溴化铵有序交替的层状结构.     

聚合物复合物层层组装膜的高效负载及大分子和小分子药物的差别性释放

基于聚合物复合物和层层组装技术实现了大分子药物硫酸软骨素和小分子药物头孢曲松钠在聚合物膜中的高效负载以及差别性释放. 壳聚糖(CHI)和大分子药物硫酸软骨素(CSS)通过静电相互作用力复合, 制备了壳聚糖-硫酸软骨素复合物(CHI-CSS). 以CHI-CSS复合物和透明质酸(HA)为构筑基元, 通过层层组装构筑负载有硫酸软骨素的聚合物复合物膜. 利用后扩散的负载方法将小分子药物头孢曲松钠(CTX)负载到聚合物膜中, 从而实现大分子和小分子2种药物在聚合物膜中的负载. 聚合物膜中负载的CTX和CSS在生理条件下具有快慢不同的差别性释放动力学特性, CTX在6 h内快速释放, 而CSS长效缓释长达14 d. 快速释放的抗生素CTX能够有效抑制细菌感染, 而酶降解作用下缓慢释放的CSS可促进伤口愈合, 在包括头颈外科在内的外科术后感染防治领域有良好应用前景.     

聚合物多层膜的表面分子工程

概述了作者及其研究群体发展的基于氢键、配位键和共价键的聚合物交替沉积组装方法.在此基础上,重点讨论将溶液中的超分子组装与界面交替沉积相结合的非常规界面交替沉积组装方法.通过结构构筑与功能组装的结合,实现了不同表面物理化学性质的可控调节,包括仿生矿化、超疏水涂层、可控组装与释放、表面分子印迹等.这些研究结果对发展基于聚合物多层膜的表面分子工程具有重要意义.     

端羧基芳脂型超支化聚酯自组装性能的研究

利用聚电解质逐层浸渍 ( layer- by- layer dipping)法制备自组装膜是最近发展起来的进行表面改性的新方法[1～ 3] .一方面 ,从理论上来说 ,只要是带电荷的聚合物都可以利用该技术制备具有优异性能的自组装膜 ;另一方面 ,还可以通过调节溶液的 p H值和离子强度等控制阴阳离子的组装过程 ,从而控制自组装膜的内部结构和表面形态 ,为在纳米级范围内设计和控制聚合物聚集态内部结构提供了可能性 .近年来 ,具有高度支化结构的超支化分子由于具有独特的物理和化学性能而受到了广泛的关注 [4 ,5] ,但以聚电解质逐层浸渍法制备超支化分子自组装膜…     

超分子聚合物凝胶

作为非常重要的软物质材料,超分子聚合物凝胶代表了一个全新的概念和更复杂的凝胶体系.这种新型的超分子体系的构建,是基于多种非共价相互作用协同的多层次组装.即小分子构筑基元首先组装成为超分子聚合物,而这些非共价聚合物的多层次组装形成凝胶的纳米结构.超分子聚合物凝胶无论是在结构上,还是在性能上都具有很多崭新的特点.因此,尽管有关超分子聚合物凝胶的研究开展的时间还很短,这一体系所表现出的独特性以及巨大潜力已经引起科学家们越来越广泛的关注.本文简要综述了这一领域的最新进展.主要论述基于多种非共价相互作用的超分子聚合物凝胶的构建以及对其力学性能的调控.     

智能响应与自修复的层层组装聚合物膜

具有刺激响应性和自修复功能的复合膜是重要的仿生功能膜材料.层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.通过结构与组成的精确调控,基于层层组装制备的微米厚度的聚电解质厚膜可以对外界刺激产生快速有效的响应,因而在制备智能仿生膜材料方面具有重要的价值.本文以作者的研究结果为基础,阐明了基于层层组装的聚电解质膜可以成功用于制备湿度和温度响应的双结构自支持膜和高效的促动器及行走机器,以及自修复超疏水和划痕修复聚电解质膜.     

Layer-by-layer assembly for rapid fabrication of thick polymeric films

In the past two decades, layer-by-layer (LbL) assembly has been proven to be a convenient and versatile method to fabricate functional films. However, using traditional dipping LbL assembly to fabricate micrometer-thick films is time consuming. Compared with ultrathin films, micrometer-thick films prepared by LbL assembly possess enhanced mechanical stability, and allow deposition of a significantly increased amount of materials and the integration of multiple functions. These merits of thick films produced by LbL assembly can result in new functions and allow the functions of ultrathin films fabricated by LbL assembly to be optimized. In this tutorial review, the methods for rapid fabrication of thick polymeric films involving LbL assembly are reviewed. The functions of such films that are relevant to their micrometer thickness are discussed.     

Layer-by-layer assembly as a versatile bottom-up nanofabrication technique for exploratory research and realistic application

The layer-by-layer (LbL) adsorption technique offers an easy and inexpensive process for multilayer formation and allows a variety of materials to be incorporated within the film structures. Therefore, the LbL assembly method can be regarded as a versatile bottom-up nanofabrication technique. Research fields concerned with LbL assembly have developed rapidly but some important physicochemical aspects remain uninvestigated. In this review, we will introduce several examples from physicochemical investigations regarding the basics of this method to advanced research aimed at practical applications. These are selected mostly from recent reports and should stimulate many physical chemists and chemical physicists in the further development of LbL assembly. In order to further understand the mechanism of the LbL assembly process, theoretical work, including thermodynamics calculations, has been conducted. Additionally, the use of molecular dynamics simulation has been proposed. Recently, many kinds of physicochemical molecular interactions, including hydrogen bonding, charge transfer interactions, and stereo-complex formation, have been used. The combination of the LbL method with other fabrication techniques such as spin-coating, spraying, and photolithography has also been extensively researched. These improvements have enabled preparation of LbL films composed of various materials contained in well-designed nanostructures. The resulting structures can be used to investigate basic physicochemical phenomena where relative distances between interacting groups is of great importance. Similarly, LbL structures prepared by such advanced techniques are used widely for development of functional systems for physical applications from photovoltaic devices and field effect transistors to biochemical applications including nano-sized reactors and drug delivery systems.     

Layer-by-layer assembly of salt-containing polyelectrolyte complexes for the fabrication of dewetting-induced porous coatings

The layer-by-layer (LbL) assembly of salt-containing nonstoichiometric polyelectrolyte complexes (PECs) with oppositely charged uncomplexed polyelectrolyte for the fabrication of dewetting-induced porous polymeric films has been systematically investigated. Salt-containing poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) complexes (noted as PAH-PAA) with a molar excess of PAH were LbL assembled with polyanion poly(sodium 4-styrenesulfonate) (PSS) to produce PSS/PAH-PAA films. The structure of the PAH-PAA complexes is dependent on the concentration of NaCl added to their aqueous dispersions, which can be used to tailor the structure of the LbL-assembled PSS/PAH-PAA films. Porous PSS/PAH-PAA films are fabricated when salt-containing PAH-PAA complexes with a large amount of added NaCl are used for LbL assembly with PSS. In-situ and ex-situ atomic force microscopy measurements disclose that the dewetting process composed of pore nucleation and pore growth steps leads to the formation of pores in the LbL-assembled PSS/PAH-PAA films. The present study provides a facile way to fabricate porous polymeric films by dewetting LbL-assembled polymeric films comprising salt-containing PECs.     

Dynamic sequential layer-by-layer deposition method for fast and region-selective multilayer thin film fabrication

We present a newly devised technique, the dynamic layer-by-layer (LbL) deposition method, that is designed to take advantage of the LbL deposition method and fluidic devices. Polyelectrolyte solutions are sequentially injected through the fluidic LbL deposition device to quickly build well-defined multilayer films on a selected region with a linear increase in the material deposited. Multilayer film fabrication by this new method on a specific region was proven to be fast and effective. The effects on film quality of the processing parameters such as concentration of polyelectrolytes, flow rate, and contact time were investigated. A half-tethered self-standing film on a substrate was fabricated to demonstrate the effectiveness and the region-selective deposition capability of the devised dynamic LbL deposition method.     

Layer-by-layer assembled gold nanoparticle films on amine-terminated substrates

This work reports the fabrication and characterization of multilayered gold nanoparticle (AuNP) thin films on aminosilane functionalized substrates. The films are fabricated via layer-by-layer (LbL) assembly using as-synthesized, un-modified AuNPs and poly(allylamine hydrochloride) as the building blocks. While most literature reports that AuNP based LbL assemblies are constructed with a single interlayer binding force, this work shows that both coordination and electrostatic interaction are involved in the process of assembly based on X-ray photoelectron spectroscopic results. The stepwise film growth behavior is demonstrated by atomic force spectroscopy and UV-vis spectroscopy. It is found that the particles agglomerate with each other and form large clusters when the number of assembled layers increases.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Electric-field-induced fabrication of covalently linked second-order nonlinear optical multilayer films on nonconductive substrates

A highly stable second-order nonlinear optical multilayer film was constructed on insulating substrates using the electric-field-induced layer-by-layer assembly technique. The substrates used in this method could be arbitrary. In another, the substrates could be modified with polyanion solution by spin coating as cladding layer. Then, the nonlinear optical multilayer films were assembled on the cladding layer directly by the electric-field-induced layer-by-layer assembly technique. The resulting cross-linked multilayer films fabricated by this method displayed high optical transparency, good thermal stability, and excellent nonlinear optical properties which can be made into waveguide devices directly.