低碳钢基体中离子注入镍和钼的电催化活性

离子注入不受相律和化学平衡的限制,也不受离子源和基体种类的约束,注入离子的能量和剂量精确可控,因而它是实现材料表面改性最有效的方法之一.自Grenness等发现注铂的钨电极,对H~+还原的电催化性能与纯铂接近之后,Wolf等将注入的Pt/RuO_2、Pt/C、Pt/WC电极用于H~+、O_2的电化学还原及甲酸的电化学氧化,其催化活性和稳定性均优于光滑的纯铂电极、Thompson等在钛基上注铂,用于催化析氢也得到类似的效果。近期文献报导,用热处理或电沉积方法制备的Ni-Mo、Ni-Mo-V 合金电极有很低的析氢超     

Pt-H_xWO_3复合电极的制备及其对氧还原的电催化

应用电位扫描法制备3种铂与氢钨青铜(HxWO3)的复合电极,即铂上沉积氢钨青铜(HxWO3/Pt),氢钨青铜上沉积铂(Pt/HxWO3)及铂和氢钨青铜共沉积(Pt-HxWO3).测试结果表明,氢钨青铜能显著提高铂电催化对氧还原的活性,其中以复合电极Pt/HxWO3的电催化活性最高,这可能是因为在玻碳基底上先电沉积氢钨青铜再电沉积铂增加了铂的有效比表面,该电极制备为减少铂用量提供一条有效途径.     

碳化钨负载纳米铂催化剂的制备及其析氢催化性能

以喷雾干燥处理的偏钨酸铵为前驱体, 采用CH4/H2为还原碳化气氛, 利用固定床气固反应法制备了具有介孔结构的碳化钨(WC)粉体. 然后通过浸渍法制备了Pt/WC粉末催化剂. 通过XRD和SEM等测试手段对Pt/WC粉末样品进行了表征, 结果表明, Pt颗粒平均直径约为13.5 nm, 且均匀分散在介孔结构WC载体上. 采用循环伏安和线性扫描等方法研究了酸性介质中Pt/WC粉末微电极对电化学析氢过程的电催化行为. 结果表明, 该电极对析氢反应具有很好的电催化活性和化学稳定性. 通过测试和计算, Pt/WC粉末微电极的Tafel方程中的a值为0.292 V, 属于低超电势析氢材料, 析氢交换电流密度为4.42 mA·cm-2, 与铂电极在同一个数量级上, 当超电势为250 mV时, 其析氢反应的活化能为26.20 kJ·mol-1.     

PEMFC商用催化剂电催化活性和寿命研究(英文)

采用自设计的特制H 形电解槽模拟单个氢 空气质子交换膜燃料电池运作,并以电化学方法、SEM及XRD等技术研究两种商用催化剂,即碳载铂(Pt/C)和纯铂钌(Pt Ru)的电催化活性、表面形貌及其结构和寿命.同时对比了两种催化剂分别放在H 形电解槽和常规电解槽中运行情况的测试结果.实验表明,经过H 形电解槽运行后的催化剂,其循环伏安曲线表征氢吸脱的特征峰分别发生了正偏移(Pt/C电极)和负偏移(Pt Ru电极),且对应的峰电流呈现减小的趋势(特别是Pt/C电极).一氧化碳的毒化造成纯铂钌的电催化活性显著下降,其影响是不可逆的.     

表面富集的超小铂纳米颗粒耦合缺陷磷化钴用于高效的电催化水分解和柔性锌空气电池（英文）

开发多功能的纳米电催化剂可以提高单位催化剂表面活性密度.本课题组采用热解和还原工艺制备了具有多功能电催化性能的超小铂纳米颗粒耦合缺陷CoP的纳米材料(Pt/d-CoP/NPC),它具有较高的氧还原反应(ORR)半波电位(0.82 V).所合成的Pt/d-CoP/NPC电催化剂具有良好的电催化析氢反应活性,当反应活性达到10 mA cm^-2时,过电位分别为33 mV@1mol/L KOH, 10 mV@0.5 mol/L H₂SO₄和70 mV@1 mol/L PBS.Pt/d-CoP/NPC催化剂还表现出较好的析氧反应活性.以合成的催化剂Pt/d-CoP/NPC作为电极组装的全解水装置和可充电锌空气电池具有良好的活性和稳定性,可以持续有效地驱动全解水产氢,在存储可再生能源方面的具有较好的应用潜力.采用X射线光电子能谱(XPS)、拉曼光谱测试和傅里叶红外光谱测试(FTIR)等技术研究了Pt颗粒与CoP之间的相互作用,并利用密度泛函理论(DFT)计算研究了催化剂的ORR反应机制.Pt/d-CoP/NPC在129.3 (2p<...     

离子注入Pt的玻碳电极上甲酸和甲醛的电氧化

制备了离子注入Pt的玻碳电极(Pt/GC),注入剂量为5×10¹⁷ion/cm²,此电极的表面组成和各元素的浓度-深度分布用AES测量,注入Pt的价态用XPS测量.在0.5mol/LHClO₄溶液中,用Pt/GC电极和纯Pt电极研究了甲酸的电氧化行为,并在五种不同种类的电解质溶液中研究了甲醛的电氧化行为.结果表明,Pt/GC电极对甲酸和甲醛的电催化性能按真实表面积计算优于纯Pt电极.这可能与离子注入Pt过程中形成纳米团簇有关.此外,在同一电极上,甲醛在不同种类的电解质溶液中产生不同的氧化电流.说明阴离子对甲醛的电氧化过程有明显影响     

电化学方法制备高分散Pt/CMK-3及其对甲醇电化学催化性能

采用直接电化学还原法在介孔碳(CMK-3)载体上直接电沉积高分散的铂纳米颗粒,制备CMK-3复合铂纳米颗粒电极(Pt/CMK-3)。 通过透射电子显微镜分析发现,铂纳米颗粒非常均匀的分布在CMK-3上,平均粒径约5 nm。 通过循环伏安测试,分析了催化剂不同负载铂含量时氯铂酸的利用率,在理论铂质量分数为20%时,这种方法制备的Pt/CMK-3所使用的氯铂酸的利用率最高,在1 mol/L CH3OH+0.5 mol/L H2SO4溶液中循环伏安测试电流密度达到382 A/g。 在相同实验条件下,Pt/CMK-3电极对甲醇电催化活性远高于Pt/XC-72(炭黑)电极和用常规电沉积方法制备的Pt/CMK-3电极。     

铂/聚邻甲基苯胺/碳材料掺杂碳糊电极对甲醇的催化氧化

以石墨和液体石蜡油为主要原料,分别制备了掺杂不同量多壁碳纳米管(MWCNT)、石墨烯(GRA)、电容活性炭(YEC)和电池活性炭(YBC)的多种碳糊底电极Y-CPE(Y代表各种掺杂碳材料,CPE代表纯碳糊电极).采用恒电位法在-0.10 V(vs.Ag/Ag Cl)电位下将铂电沉积到这些电极上.结果表明,当电池碳的含量为14%时,Pt/YBC-CPE(14%)复合电极对甲醇具有最好的电催化氧化活性.采用恒电位方法在0.85 V(vs.Ag/Ag Cl)电位下将聚邻甲基苯胺(POT)电聚合沉积到纯碳糊电极CPE和含有电池碳的YBC-CPE(14%)电极上,得到复合电极POT/CPE和POT/YBC-CPE(14%),再通过恒电位方法将铂电沉积到这2个复合电极上.扫描电镜(SEM)观察结果表明,在Pt/CPE,Pt/YBC-CPE(14%),Pt/POT(6.5 mC)/CPE和Pt/POT(6.5 mC)/YBC-CPE(14%)4个复合电极中,在Pt/POT/YBC-CPE(14%)复合电极上的铂粒子的尺寸最小,并且Pt/POT(6.5 mC)/YBC-CPE(14%)复合电极电催化氧化甲醇活性最高.在POT(6.5 mC)/CPE和POT(6.5 mC)/YBC-CPE(14%)上Pt纳米颗粒的电沉积过程是一个近似的3D成核过程.研究还发现,复合电极Pt/POT/CPE和Pt/POT/YBC-CPE电催化氧化甲醇的活性随POT膜厚度的增加先增大后减少,存在一个最佳的膜厚度.     

氢钼青铜对铂催化氧还原反应的促进作用

采用循环伏安法在玻碳电极上和硫酸溶液中电沉积制备出铂催化剂(Pt)及铂-氢钼青铜复合催化剂(Pt-HxMoO3), 用旋转圆盘电极研究并比较了它们对硫酸溶液中氧还原反应的催化活性. 研究结果表明, HxMoO3能明显地提高Pt对氧还原反应的电催化活性. 通过对静态电极上氧还原的峰电流与扫描速度的关系以及旋转圆盘电极上氧还原电流与旋转速度的关系的分析发现, HxMoO3提高了铂电极氧还原反应电荷传递步骤的传递系数, 因此加快了氧还原的动力学过程.     

电化学还原制备铂-氢钨青铜阳极

用电化学还原法在炭布上电沉积铂-氢钨青铜复合催化剂作为质子交换膜燃料电池(PEMFC)阳极。 利用X射线衍射、扫描电子显微镜、单电池极化性能测试以及电化学阻抗谱(EIS)法研究了催化剂的组成、分散性及其对氢氧化的电催化性能。 实验结果表明,阴极还原顺序对催化剂的形貌及分散有较大的影响。 采用分步还原法制备的HxWO3/Pt电极(先沉积铂,后沉积氢钨青铜)对氢氧化具有较高的催化活性,氢钨青铜与铂形成协同催化效应,提高了铂对氢氧化的催化活性。 而共沉积制备的Pt-HxWO3催化剂的电催化活性较差,这是因为共沉积过程中,由于受到2种电解液共存的影响,电极催化层中没有或较少得到氢钨青铜,且铂催化剂出现明显的团聚现象。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.