微波辐射下苯并噁唑基吡啶的合成

在微波辐射条件下,利用邻氨基酚和吡啶羧酸在多聚磷酸中的缩合反应,合成了2种苯并唑基取代吡啶 最佳反应条件为:450W辐射4min 相比于常规反应,反应时间大为缩短且产率令人满意     

水相中微波辅助合成咪唑并[1,2-α]吡啶衍生物的研究

开展了水相中硝基烯烃与氨基吡啶反应生成咪唑并[1,2-α]吡啶衍生物的微波辅助合成研究。结果表明:相同反应时间,在微波辅助条件下,生成咪唑并[1,2-α]吡啶衍生物的速率较常规加热条件下增大。一系列咪唑并[1,2-α]吡啶衍生物被高效的合成出来,最高产率达到85%。产物结构经~1H NMR,~(13)C NMR及MS得到确证。该方法具有产率高、操作简单、环境友好等优点。     

微波促进的Dimroth重排反应合成吡啶并[2,3-d]嘧啶-4-胺衍生物（英文）

研究了N-(3,5-二氯苯基)吡啶并[2,3-d]嘧啶-4-胺的合成新方法.在微波辐射条件下,以2-氨基-3-氰基吡啶为原料,依次通过缩合、环化和Dimroth重排两步反应,得到目标产物N-(3,5-二氯苯基)吡啶并[2,3-d]嘧啶-4-胺,总收率90%.并应用该方法,合成了20个吡啶并[2,3-d]嘧啶-4-胺类化合物.同时,比较了微波辐射和传统油浴加热条件下的反应结果.结果表明,微波辐射条件下,反应时间短,产率高.此方法有望成为一种高效、温和、对环境友好的合成吡啶并[2,3-d]嘧啶-4-胺的方法.     

微波辐射下双(2-苯并咪唑基)烷烃的合成

微波辐射条件下合成了7种双（2－苯并咪唑基）烷烃,为这类化合物的合成提供了一种新方法,相比于常规反应,反应时间大为缩短且产率相当。     

微波辐射下吡啶[2,3-d]嘧啶衍生物的高效合成

本文以等摩尔的芳醛,巴比妥酸（或1,3-二甲基巴比妥酸）,5-氨基-2-甲基苯[d]噻唑为原料,以醋酸和乙二醇为溶剂,微波辐射下多组分一锅法合成了一系列新的吡啶[2,3-d]嘧啶衍生物。这种方法具有产率高,操作简便,反应时间短等优点。     

水相中微波辅助镍催化合成四氮唑异喹啉衍生物的研究

开展了取代5-(2-卤代苯基)-1H四唑与炔烃为原料在镍(II)盐催化串联反应生成四氮唑[5,1-α]异喹啉衍生物的微波辅助合成研究。结果表明:相同反应时间,在镍催化微波辅助条件下,生成四氮唑[5,1-α]异喹啉衍生物的效率较常规加热条件下增强。一系列四氮唑[5,1-α]异喹啉衍生物被高效地合成出来,最高产率达到88%。产物结构经~1H NMR、~(13)C NMR及MS得到确证。该方法具有产率高、操作简单、环境友好等优点。     

微波辐射促进的3-烷基取代咪唑并[1,5-a]吡啶合成

分别在常规加热和微波辐射条件下, 由双(2-吡啶甲酰)、二(2-吡啶)甲酮与脂肪醛及醋酸铵在醋酸溶剂中反应成功地制备了3-烷基取代的咪唑并[1,5-a]吡啶. 实验结果表明: 微波法比传统的合成方法产率高、反应时间短. 产物的结构经过¹H NMR, MS和元素分析表征.     

以水作溶剂微波法合成1,4-二氢苯并咪唑并[1,2-a]嘧啶类衍生物

以芳香醛、2-氨基苯并咪唑和丙二腈为原料,用传统法和微波辐射法三组分一锅煮法合成1,4-二氢苯并咪唑并[1,2-a]嘧啶类化合物。反应均在无催化剂条件下以水作反应溶剂进行。结果表明,采用微波辐射优于常规方法,三组分摩尔比n(2-氨基苯并咪唑)∶n(丙二腈)∶n(取代苯甲醛)=1∶1.1∶1,辐射功率400 W,时间为6～8 min时,1,4-二氢苯并咪唑并[1,2-a]嘧啶的收率在85%以上,反应速率比常规加热条件下提高70倍。通过荧光发射光谱研究证实,该系列化合物具有明显的荧光性质,其荧光发射峰位于480～550 nm。     

SiC管中微波辅助芳烃钌（Ⅱ）化合物[（η6-C6H6）Ru（H2iiP）Cl]Cl的合成

使用SiC管为反应容器,在微波辐射条件下以[(η6-C6H6)RuCl2]2为原料与2-(吲哚基)咪唑[4,5-f]-[1,10]菲啰啉(H2iiP)反应,制得芳烃钌(Ⅱ)化合物[(η6-C6H6)Ru(H2iiP)Cl]Cl(1),并对其进行了表征.采用正交实验法确定反应的最佳合成条件为:投料比n([(η6-C6H6)RuCl2]2)∶n(H2iiP)=1∶2.2,反应温度90℃,微波辐射时间30 min.该反应的平均产率达到96.0%,反应产率的相对标准偏差(RSD)为1.28%,说明微波辐射条件下,在SiC管中能够高产率地制备芳烃钌化合物,并且反应具有良好的重现性.进一步采用MTT方法研究发现,芳烃钌(Ⅱ)化合物1能够选择性抑制MCF-7乳腺癌的生长.     

微波辐射下一锅法合成2-氨基-6-溴-4-芳基-5H-茚并[1,2-b]吡啶-3-腈衍生物

以芳香醛、4-溴茚酮、丙二腈和醋酸铵为原料,分别用微波辐射和传统加热法,一步法合成7种未见文献报道的2-氨基-6-溴基-4-芳基-5H-茚并[1,2-b]吡啶-3-腈衍生物.对比两种方法,在常压下微波具有反应时间短、产率较高等特点.所有化合物均经IR,1HNMR和元素分析确定.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.