Metalated diblock and triblock poly(ethylene oxide)-block-poly(4-vinylpyridine) copolymers: understanding of micelle and bulk structure

The paper provides new insights into the structure of Pt-containing diblock and triblock copolymers based on poly(ethylene oxide) (PEO) and poly(4-vinylpyridine) (P4VP), using a combination of atomic force microscopy (AFM), X-ray diffraction (XRD), transmission electron microscopy (TEM), and anomalous small-angle X-ray scattering (ASAXS). Parallel studies using methods contributing supplemental structural information allowed us to comprehensively characterize sophisticated polymer systems during metalation and to exclude possible ambiguity of the data interpretation of each of the methods. AFM and TEM make available the determination of sizes of the micelles and of the Pt-containing micelle cores, respectively, while a combination of XRD, TEM, and ASAXS reveals Pt-nanoparticle size distributions and locations along with the structural information about the polymer matrix. In addition, for the first time, ASAXS revealed the organization of Pt-nanoparticle-filled diblock and triblock copolymers in the bulk. The nanoparticle characteristics are mainly determined by the type of block copolymer system in which they are found: larger particles (2.0-3.0 nm) are formed in triblock copolymer micelles, while smaller ones (1.5-2.5 nm) are found in diblock copolymer micelles. This can be explained by facilitated intermicellar exchange in triblock copolymer systems. For both systems, Pt nanoparticles have narrow particle size distributions as a result of a strong interaction between the nanoparticle surface and the P4VP units inside the micelle cores. The pH of the medium mainly influences the particle location rather than the particle size. A structural model of Pt-nanoparticle clustering in the diblock PEO-b-P4VP and triblock P4VP-b-PEO-b-P4VP copolymers in the bulk was constructed ab initio from the ASAXS data. This model reveals that nearly spherical micellar cores of about 10 nm in diameter (filled with Pt nanoparticles) aggregate forming slightly oblate hollow bodies with an outer diameter of about 40 nm.     

Dissipative particle dynamics simulations of polymer-protected nanoparticle self-assembly

Dissipative particle dynamics simulations were used to study the effects of mixing time, solute solubility, solute and diblock copolymer concentrations, and copolymer block length on the rapid coprecipitation of polymer-protected nanoparticles. The simulations were aimed at modeling Flash NanoPrecipitation, a process in which hydrophobic solutes and amphiphilic block copolymers are dissolved in a water-miscible organic solvent and then rapidly mixed with water to produce composite nanoparticles. A previously developed model by Spaeth et al. [J. Chem. Phys. 134, 164902 (2011)] was used. The model was parameterized to reproduce equilibrium and transport properties of the solvent, hydrophobic solute, and diblock copolymer. Anti-solvent mixing was modeled using time-dependent solvent-solute and solvent-copolymer interactions. We find that particle size increases with mixing time, due to the difference in solute and polymer solubilities. Increasing the solubility of the solute leads to larger nanoparticles for unfavorable solute-polymer interactions and to smaller nanoparticles for favorable solute-polymer interactions. A decrease in overall solute and polymer concentration produces smaller nanoparticles, because the difference in the diffusion coefficients of a single polymer and of larger clusters becomes more important to their relative rates of collisions under more dilute conditions. An increase in the solute-polymer ratio produces larger nanoparticles, since a collection of large particles has less surface area than a collection of small particles with the same total volume. An increase in the hydrophilic block length of the polymer leads to smaller nanoparticles, due to an enhanced ability of each polymer to shield the nanoparticle core. For unfavorable solute-polymer interactions, the nanoparticle size increases with hydrophobic block length. However, for favorable solute-polymer interactions, nanoparticle size exhibits a local minimum with respect to the hydrophobic block length. Our results provide insights on ways in which experimentally controllable parameters of the Flash NanoPrecipitation process can be used to influence aggregate size and composition during self-assembly.     

三嵌段共聚物和两嵌段共聚物在水溶液中共混自组装成多室胶束结构的耗散粒子动力学模拟(英文)

利用耗散粒子动力学模拟研究了在水溶液中混合不同的线形三嵌段共聚物AxByCz和线形两嵌段共聚物AmBn对多室胶束的形貌多样性的影响.通过改变线形的三嵌段共聚物和两嵌段共聚物的链长来寻找多室胶束的形成条件.由线形三嵌段共聚物和线形两嵌段共聚物的不同混合形成的多室胶束结构是多种多样的,例如"蠕虫状"胶束、"汉堡包"胶束、"球上球"胶束、"核-壳-壳"胶束等等.多室胶束的整体形貌和内部结构的控制都可以从线形三嵌段共聚物和两嵌段共聚物的二元共混得到.为了表征获得的多室胶束结构,我们计算了密度图和成对分布函数图.在此工作中,可以获得和观察到复杂的多室胶束.结果表明,简单地混合线形的三嵌段共聚物和线形的两嵌段共聚物是一个控制多室胶束形貌和结构的有效方法,在工程实验中可以更简单更经济地形成多室胶束结构.因此,在设计新的多室胶束方面,聚合物共混仍然是未来值得更加关注的一个话题.     

The effects of nanoparticles on the lamellar phase separation of diblock copolymers

The phase separation of diblock copolymers containing some energetically neutral/biased nanoparticles is studied by means of large-scale dissipative particle dynamics (DPD) simulations. The effects of the volume fraction of nanoparticles, the size of nanoparticles, and the interaction strength between nanoparticles and blocks on the lamellar phase separation of diblock copolymers are investigated. When these effects are up to a critical value, the diblock copolymer nanocomposites can form a new bicontinuous morphology, which is well consistent with the experimental results. It is also found that the degree of order of phase separation for a given system increases slightly and then decreases abruptly until the bicontinuous morphology is formed as the volume fraction of nanoparticles increases. Furthermore, we discuss the microphase transition through the position distributions of nanoparticles and present a phase diagram in terms of the nanoparticle volume fraction, size, and surface interaction strength.     

A theoretical study for nanoparticle partitioning in the lamellae of diblock copolymers

Morphology control is important for practical applications of composite materials that consist of functional polymers and nanoparticles. Toward that end, block copolymers provide useful templates to arrange nanoparticles in the scaffold of self-organized polymer microdomains. This paper reports theoretical predictions for the distribution of nanoparticles in the lamellar structures of symmetric diblock copolymers on the basis of a polymer density functional theory (DFT) and the potential distribution theorem (PDT). The DFT predicts periodic spacing of lamellar structures in good agreement with molecular dynamics simulations. With the polymer structure from DFT as the input, the PDT is used to examine the effects of particle size, surface energy, polymer chain length, and compressibility on the distribution of nanoparticles in the limit of low particle density. It is found that the nanoparticle distribution depends not only on the particle size and surface energy but also on the local structure of the microdomain interface, polymer chain length, and compressibility. The theoretical predictions are compared well with experiments and simulations.     

Depletion-induced surface alignment of asymmetric diblock copolymer in selective solvents

Phase separation of asymmetric diblock copolymer near surfaces in selective solvents is theoretically investigated by using the real-space version of self-consistent field theory (SCFT). Several morphologies are predicted and the phase diagram is constructed by varying the distance between two parallel hard surfaces (or the film thickness) W and the block copolymer concentration f(P). Morphologies of the diblock copolymer in dilute solution are found to change significantly with different film thicknesses. In confined systems, stable morphologies found in the bulk solution become unstable due to the loss of polymer conformation entropy. The vesicle phase region contracts when the repulsive interaction between the blocks is strong (strong segregation regime). The mixture of vesicles, rodlike and spherelike micelles and the mixture of vesicles and sphere-like micelles disappear in contrast to the weakly segregating regime. The walls strongly affect the phase separation of block copolymer in selective solvent, and the depletion layer near the surface contributes much to the micelle formation of the block copolymer. Interestingly, the self-assembled morphologies stay near the walls with the distance on the order of the radius of gyration of the block copolymer. The oscillation of the polymer distribution near the walls allows the surface phase separation to be observed due to the strong repulsion between the blocks A and B.     

Diblock copolymer micellar lithography: 2. Formation of highly ordered nanoparticle ensembles with controlled geometric characteristics

The regularities of the formation of hexagonal ordered ensembles of gold nanoparticles using monomicellar films of amphiphilic diblock copolymers of styrene and vinylpyridine as templates are studied. The possibility of controlling the structure of these ensembles (in particular the particle size and interparticle distance) by varying experimental parameters (characteristics of diblock copolymer molecules, conditions for film formation, procedure for the reduction of precursor, etc.) is demonstrated. The procedure for enlarging the nanoparticles that form ensembles in dilute mixed solution of chloroauric acid and weak reductant (hydroxylamine) is realized. This procedure allows particle size to be increased from 7 to 30 nm, which substantially changes the optical characteristics of synthesized structures. Moreover, a high degree of order of 2D ensemble of nanoparticles is retained.     

两嵌段共聚物反相溶剂中组装结构转变动力学的模拟研究

利用耗散粒子动力学方法,分别研究了不同结构的组装体在改变溶剂的选择性后,在溶液及界面上的结构演变动力学.模拟结果表明,在改变溶剂的选择性后,大球形胶束在溶液中转变形成反向球形胶束,而在界面上则转变形成反向环状胶束,当前模拟结果与已有的实验结果一致.此外,模拟结果还预测出,在改变溶剂的选择性后,环状胶束在溶液中转变形成反向环状胶束,而在界面处受限形成反向的支化蠕虫状胶束;蠕虫状胶束则在溶液中转变形成反向环状胶束,而在界面处受限形成多层纳米球结构;囊泡在溶液中转变形成分散的小胶束聚集体,而在界面处受限形成球形的补丁纳米粒子.     

Uniformly sized gold nanoparticles derived from PS-b-P2VP block copolymer templates for the controllable synthesis of Si nanowires

A monolayer of gold-containing surface micelles has been produced by spin-coating solution micelles formed by the self-assembly of the gold-modified polystyrene-b-poly(2-vinylpyridine) block copolymer in toluene. After oxygen plasma removed the block copolymer template, highly ordered and uniformly sized nanoparticles have been generated. Unlike other published methods that require reduction treatments to form gold nanoparticles in the zero-valent state, these as-synthesized nanoparticles are in form of metallic gold. These gold nanoparticles have been demonstrated to be an excellent catalyst system for growing small-diameter silicon nanowires. The uniformly sized gold nanoparticles have promoted the controllable synthesis of silicon nanowires with a narrow diameter distribution. Because of the ability to form a monolayer of surface micelles with a high degree of order, evenly distributed gold nanoparticles have been produced on a surface. As a result, uniformly distributed, high-density silicon nanowires have been generated. The process described herein is fully compatible with existing semiconductor processing techniques and can be readily integrated into device fabrication.     

pH-responsive diblock copolymer micelles at the silica/aqueous solution interface: Adsorption kinetics and equilibrium studies

The adsorption behavior of two examples of a weakly basic diblock copolymer, poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate) (PDMA-PDEA), at the silica/aqueous solution interface has been investigated using a quartz crystal microbalance with dissipation monitoring and an optical reflectometer. Dynamic and static light scattering measurements have also been carried out to assess aqueous solution properties of such pH-responsive copolymers. In alkaline solution, core-shell micelles are formed above the critical micelle concentration (cmc) by both copolymers, whereas the chains are molecularly dissolved (as unimers) at all concentrations in acidic solution. As a result, the adsorption behavior of PDMA-PDEA diblock copolymers on silica is strongly dependent on both the copolymer concentration and the solution pH. Below the cmc at pH 9, the cationic PDMA-PDEA copolymers adsorb as unimers and the conformation of the adsorbed polymer is essentially flat. At concentrations just above the cmc, the initial adsorption of copolymer onto the silica is dominated by the unimers due to their faster diffusion compared to the much larger micelles. Rearrangement of the adsorbed unimers and/or their subsequent displacement by micelles from solution is then observed during an equilibration period, and the final adsorbed mass is greater than that observed below the cmc. At concentrations well above the cmc, the much higher proportion of micelles in solution facilitates more effective competition for the surface at all stages of the adsorption process and no replacement of initially adsorbed unimers by micelles is evident. However, the adsorbed layer undergoes gradual rearrangement after initial adsorption. This relaxation is believed to result from a combination of further copolymer adsorption and swelling of the adsorbed layer.     

反应条件对聚苯乙烯复合硫化铅纳米微粒粒度及分布的影响

用新的方法将ＰｂＳ纳米微粒复合在聚苯乙烯光学塑料中，并利用吸收光谱、小角Ｘ－光散射和透射电镜等方法研究了不同反应条件对复合的硫化铅（ＰｂＳ）纳米微粒粒度及分布的影响．结果表明，在一定范围内Ｈ２Ｓ的量和初始含铅聚合物浓度对纳米微粒的粒度影响很小，但对其粒度分布影响较大；当Ｈ２Ｓ与Ｐｂ２＋的摩尔比及初始含铅聚合物浓度均较大时，纳米微粒的粒度分布变宽．实验结果表明复合于聚苯乙烯中的ＰｂＳ的粒度分布是由溶液中反应决定的，本体聚合反应时对ＰｂＳ微粒的粒度分布影响很小．因此控制适当反应条件，可以得到粒度分布均一、分散均匀且透明性好的ＰｂＳ纳米微粒复合有机光学材料．     

Formation of gold@polymer core-shell particles and gold particle clusters on a template of thermoresponsive and pH-responsive coordination triblock copolymer

Template synthesis of various morphological gold colloidal nanoparticles using a thermoresponsive and pH-responsive coordination triblock copolymer of poly(ethylene glycol)-b-poly(4-vinylpyridine)-b-poly(N-isopropylacrylamide) is studied. The template morphology of the thermoresponsive and pH-responsive coordination triblock copolymer, which can be tuned by simply changing the pH or temperature of the triblock copolymer aqueous solution, ranges from single chains to core-corona micelles and further to micellar clusters. Various morphological gold colloidal nanoparticles such as discrete gold nanoparticles, gold@polymer core-shell nanoparticles, and gold nanoparticle clusters are synthesized on the corresponding template of the triblock copolymer by first coordination with gold ions and then reduction by NaBH4. All three resultant gold colloidal nanoparticles are stable in aqueous solution, and their sizes are 2, 10, and 7 nm, respectively. The gold@polymer core-shell nanoparticles are thermoresponsive. The gold nanoparticle cluster has a novel structure, and each one holds about 40 single gold nanoparticles.     

Surfactant/nonionic copolymer interaction: a SLS, DLS, ITC, and NMR investigation

The interactions between an oxyphenylethylene-oxyethylene nonionic diblock copolymer with the anionic surfactant sodium dodecyl sulfate (SDS) have been studied in dilute aqueous solutions by static and dynamic light scattering (SLS and DLS, respectively), isothermal titration calorimetry (ITC), and 13C and self-diffusion nuclear magnetic resonance techniques. The studied copolymer, S20E67, where S denotes the hydrophobic styrene oxide unit and E the hydrophilic oxyethylene unit, forms micelles of 15.6 nm at 25 degrees C, whose core is formed by the styrene oxide chains surrounded by a water swollen polyoxyethylene corona. The S20E67/SDS system has been investigated at a copolymer concentration of 2.5 g dm(-3), for which the copolymer is fully micellized, and with varying surfactant concentration up to approximately 0.15 M. When SDS is added to the solution, two different types of complexes are observed at various surfactant concentrations. From SLS and DLS it can be seen that, at low SDS concentrations, a copolymer-rich surfactant mixed micelle or complex is formed after association of SDS molecules to block copolymer micelles. These interactions give rise to a strong decrease in both light scattering intensity and hydrodynamic radius of the mixed micelles, which has been ascribed to an effective reduction of the complex size, and also an effect arising from the increasing electrostatic repulsion of charged surfactant-copolymer micelles. At higher surfactant concentrations, the copolymer-rich surfactant micelles progressively are destroyed to give surfactant-rich-copolymer micelles, which would be formed by a surfactant micelle bound to one or very few copolymer unimers. ITC data seem to confirm the results of light scattering, showing the dehydration and rehydration processes accompanying the formation and subsequent destruction of the copolymer-rich surfactant mixed micelles. The extent of interaction between the copolymer and the surfactant is seen to involve as much as carbon 3 (C3) of the SDS molecule. Self-diffusion coefficients corroborated light scattering data.     

Electric field manipulation of charged copolymer worm micelles

Manipulation of diblock copolymer worm micelles by external electric fields is visualized by fluorescence microscopy in dilute, aqueous solution. Hydrodynamic coupling of the poly(acrylic acid)-(1,4)-polybutadiene (PAA-PBD) worm motion to the electric field and the effective stiffening of the worms in an oscillating electric field are demonstrated. A brief discussion on using this technique to estimate the rheological properties of wormlike micelles is presented.     

Computer simulations of block copolymer tethered nanoparticle self-assembly

We perform molecular simulations to study the self-assembly of block copolymer tethered cubic nanoparticles. Minimal models of the tethered nanoscale building blocks (NBBs) are utilized to explore the structures arising from self-assembly. We demonstrate that attaching a rigid nanocube to a diblock copolymer affects the typical equilibrium morphologies exhibited by the pure copolymer. Lamellar and cylindrical phases are observed in both systems but not at the corresponding relative copolymer tether block fractions. The effect of nanoparticle geometry on phase behavior is investigated by comparing the self-assembled structures formed by the tethered NBBs with those of their linear ABC triblock copolymer counterparts. The tethered nanocubes exhibit the conventional triblock copolymer lamellar and cylindrical phases when the repulsive interactions between different blocks are symmetric. The rigid and bulky nature of the cube induces interfacial curvature in the tethered NBB phases compared to their linear ABC triblock copolymer counterparts. We compare our results with those structures obtained from ABC diblock copolymer tethered nanospheres to further elucidate the role of cubic nanoparticle geometry on self-assembly.     

Aggregate morphologies of amphiphilic ABC triblock copolymer in dilute solution using self-consistent field theory

The complex microstructures of amphiphilic ABC linear triblock copolymers in which one of the end blocks is relatively short and hydrophilic, and the other two blocks B and C are hydrophobic in a dilute solution, have been investigated by the real-space implementation of self-consistent field theory (SCFT) in two dimensions (2D). In contrast to diblock copolymers in solution, the aggregation of triblock copolymers are more complicated due to the presence of the second hydrophobic blocks and, hence, big ranges of parameter space controlling the morphology. By tailoring the hydrophobic degree and its difference between the blocks B and C, the various shapes of vesicles, circlelike and linelike micelles possibly corresponding to spherelike, and rodlike micelles in 3D, and especially, peanutlike micelles not found in diblock copolymers are observed. The transition from vesicles to circlelike micelles occurs with increasing the hydrophobicity of the blocks B and C, while the transition from circlelike micelles to linelike micelles or from the mixture of micelles and vesicles to the long linelike micelles takes place when the repulsive interaction of the end hydrophobic block C is stronger than that of the middle hydrophobic block B. Furthermore, it is favorable for dispersion of the block copolymer in the solvent into aggregates when the repulsion of the solvent to the end hydrophobic block is larger than that of the solvent to the middle hydrophobic block. Especially when the bulk block copolymers are in a weak segregation regime, the competition between the microphase separation and macrophase separation exists and the large compound micelle-like aggregates are found due to the macrophase separation with increasing the hydrophobic degree of blocks B and C, which is absent in diblock copolymer solution. The simulation results successfully reproduce the existing experimental ones.     

Coarse-grained molecular dynamics simulation on the placement of nanoparticles within symmetric diblock copolymers under shear flow

We present molecular dynamics simulations coupled with a dissipative particle dynamics thermostat to model and simulate the behavior of symmetric diblock copolymer/nanoparticle systems under simple shear flow. We consider two categories of nanoparticles, one with selective interactions toward one of the blocks of a model diblock copolymer and the other with nonselective interactions with both blocks. For the selective nanoparticles, we consider additional variants by changing the particle diameter and the particle-polymer interaction potential. The aim of our present study is to understand how the nanoparticles disperse in a block copolymer system under shear flow and how the presence of nanoparticles affects the rheology, structure, and flow behavior of block copolymer systems. We keep the volume fraction of nanoparticles low (0.1) to preserve lamellar morphology in the nanocomposite. Our results show that shear can have a pronounced effect on the location of nanoparticles in block copolymers and can therefore be used as another parameter to control nanocomposite self-assembly. In addition, we investigate the effect of nanoparticles on shear-induced lamellar transition from parallel to perpendicular orientation to further elucidate nanocomposite behavior under shear, which is an important tool to induce long-range order in self-assembling materials such as block copolymers.     

Design of polylactide-grafted copolymeric stabilizer for dispersion polymerization of D,L-lactide

Poly(D,L-lactide) (PDLLA) microspheres with narrow diameter distribution were prepared by dispersion polymerization of D,L-lactide in xylene/heptane (1:2, v/v) using poly(dodecyl methacrylate)-g-poly(D,L-lactide) (PDMA-g-PDLLA) as a dispersion stabilizer. The particle diameters of PDLLA microspheres were controlled from 200 nm to 5 μm by altering the concentration and the graft chain number of PDMA-g-PDLLA. The effect of the copolymer composition on the particle diameter was investigated to clarify an important factor of the copolymer structure for the control of the particle diameter. As a result, it was necessary for anchor block in diblock copolymer as a dispersion stabilizer to have low solubility in the solution rather than the compatibility with particles. Moreover, we confirmed by dynamic light scattering measurement that PDMA-g-PDLLA formed micelles in the solution. In conclusion, it was clarified that PDLLA microspheres with a wide range of particle diameter were prepared due to the different kinetic stability of micelles.     

Multicomponent nanoparticles via self-assembly with cross-linked block copolymer surfactants

We describe a simple and versatile protocol to prepare water-soluble multifunctional nanostructures by encapsulation of different nanoparticles in shell cross-linked, block copolymer micelles. This method permits simultaneous incorporation of different nanoparticle properties within a nanoscale micellar container. We have demonstrated the co-encapsulation of magnetic (gamma-Fe2O3 and Fe3O4), semiconductor (CdSe/ZnS), and metal (Au) nanoparticles in different combinations to form multicomponent micelles that retain the precursor particles' distinct properties. Because these multifunctional hybrid nanostructures spontaneously assemble from solution by simultaneous desolvation of nanoparticles and amphiphilic block copolymer components, we anticipate that this can be used as a general protocol for preparing multifunctional nanostructures without explicit multimaterial synthesis or surface functionalization of nanoparticles.     

Multipod structures of lamellae‐forming diblock copolymers in three‐dimensional confinement spaces: Experimental observation and computer simulation

The three‐dimensional (3D) confinement effect on the microphase‐separated structure of a diblock copolymer was investigated both experimentally and computationally. Block copolymer nanoparticles were prepared by adding a poor solvent into a block copolymer solution and subsequently evaporating the good solvent. The 3D structures of the nanoparticles were quantitatively determined with transmission electron microtomography (TEMT). TEMT observations revealed that various complex structures, including tennis‐ball, mushroom‐like, and multipod structures, were formed in the 3D confinement. Detailed structural analysis, showed that one block of the diblock copolymer slightly prefers to segregate into the particle surface compared with the other block. The observed structures were further elaborated using cell dynamics computer simulation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1702–1709