Morphology of hybrid polystyrene-block-poly(ethylene oxide) micelles: analytical ultracentrifugation and SANS studies

Morphology and structure of aqueous block copolymer solutions based on polystyrene-block-poly(ethylene oxide) (PS-b-PEO) of two different compositions, a cationic surfactant, cetyl pyridinium chloride (CPC), and either platinic acid (H2PtCl6.6H2O) or Pt nanoparticles were studied using a combination of analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), and small angle neutron scattering (SANS). These studies combining methods contributing supplemental and analogous structural information allowed us to comprehensively characterize the complex hybrid systems and to discover an isotope effect when H2O was replaced with D2O. In particular, TEM shows formation of both micelles and larger aggregates after incorporation of platinic acid, yet the amount of aggregates depends on the H2PtCl6.6H2O concentration. AUC reveals the presence of micelles and micellar clusters in the PS-b-PEO block copolymers solution and even larger (supermicellar) aggregates in hybrids (with CPC). Conversely, SANS applied to D2O solutions of the similar species indicates that micelles are spherical and no other micellar species are found in block copolymer solutions. To reconcile the SANS and AUC data, we carried out AUC examination of the corresponding D2O block copolymer solutions. These measurements demonstrate a pronounced isotope effect on micelle aggregation and micelle size, i.e., no micelle aggregation in D2O solutions, revealing good agreement of AUC and SANS data.     

Redox-mediated synthesis and encapsulation of inorganic nanoparticles in shell-cross-linked cylindrical polyferrocenylsilane block copolymer micelles

Detailed studies of a new approach to the synthesis and encapsulation of silver and silver halide nanoparticles inside shell-cross-linked cylindrical block copolymer polyisoprene-block-polyferrocenyldimethylsilane (PI-b-PFS) micelles (1) through in situ redox reactions are reported. The cylindrical nanostructures 1 were prepared by the solution self-assembly of the PI-b-PFS diblock copolymer in the PI-selective solvent hexane followed by Pt(0)-catalyzed PI shell-cross-linking hydrosilylation reactions. The partial preoxidation of the swollen PFS core using tris(4-bromophenyl)aminium hexachloroantimonate [p-BrC6H4)3N][SbCl6] (2, Magic Blue) followed by redox reaction between the remaining Fe(II) centers in the PFS core and Ag(+) cations led to the formation of silver nanoparticles. High-resolution scanning transmission electron microscopy images of the resulting peapod structures provided a clear indication that the nanoparticles were encapsulated inside the micelles. The composition of the nanoparticles was analyzed by energy-dispersive X-ray spectroscopy (EDX). By combining the evolution of the UV-vis spectra of the reaction mixture and EDX measurements, we surprisingly found that silver halide seed particles were formed through a precipitation reaction at an early stage of the encapsulation process. The size of the silver nanoparticles varied with different amounts of silver ions added to the micelle solution. When I2 was used as the preoxidant, AgI nanoparticles were formed and encapsulated inside the cylinders through the precipitation reaction between iodide anions and silver ions. The packing density of the resulting AgI nanoparticles was increased by an iterative addition method, which utilizes the reversible redox properties of PFS. The small encapsulated AgI nanoparticles were also shown to serve as seeds for the formation of larger Ag nanoparticles when a silver salt was subsequently added.     

Synthesis of Fe_3O_4@SiO_2@polymer nanoparticles for controlled drug release

Novel multifunctional nanoparticles containing a magnetic Fe3O4@SiO2 sphere and a biocompatible block copolymer poly(ethylene glycol)-b-poly(aspartate)(PEG-b-PAsp) were prepared.The silica coated on the superparamagnetic core was able to achieve a magnetic dispersivity,as well as to protect Fe3O4 against oxidation and acid corrosion.The PAsp block was grafted to the surface of Fe3O4@SiO2 nanoparticles by amido bonds,and the PEG block formed the outermost shell.The anticancer agent doxorubicin(DOX) was loade...     

Block copolymer-mediated synthesis of size-tunable gold nanospheres and nanoplates

We have successfully controlled the size and shape of isotropic and anisotropic gold nanocrystals through a one-step reaction by using amphiphilic polyethylene oxide-polystyrene oxide block copolymers as both reductant and stabilizing agents in water solution. Spherical or quasispherical nanoparticles were obtained at room temperature with tunable mean sizes and polydispersities depending on reaction conditions, that is, on copolymer block length, and copolymer and gold salt concentrations. By moderate increases of reaction temperature up to 65 degrees C, progressive formation of single-crystalline gold nanoplates in good yields takes place (up to 70%) without the necessity of additional reactants or growing solutions. These nanoplates are characterized by lateral mean sizes between 0.1-1.2 microm depending on copolymer concentration and reaction temperature, with mainly truncated or rounded triangular shapes with {111} planes as two basal surfaces. This allows us to tune the surface plasmon band of the nanoplates from ca. 850 nm to more than 1100 nm, well inside the near-infrared region (NIR), which enables the use of these type of nanostructures as a very promsing materials in applications such as optical coatings, SERS, and cancer cell hyperthermia. We proposed that the growth of these nanostructures can stem from a decrease in the reaction rate as temperature increases due to an enhanced copolymer hydrophobicity, which gives rise to a structure of interacting micelles formed from the fluid via a percolation transition (known as "soft gel") at elevated temperatures. In this way, reduction becomes slow enough to allow kinetic control of the reaction, and preferential adsorption of the copolymer molecules/micelles on certain crystallographic planes can favor the growth of certain nanocrystal facets to give the final structure. This alternative water-based system provides a more convenient and environmentally benign route to the synthesis of shape-controlled noble-metal nanocrystals in high yield because it does not involve toxic organic solvents or reagents and serves as a bridge between two frontline discipline: the block copolymeric science and anisotropic nanoparticles.     

Spiky gold nanoshells

We report a high-yield synthetic method for a new type of metal nanostructure, spiky gold nanoshells, which combine the morphological characteristics of hollow metal nanoshells and nanorods. Our method utilizes block copolymer assemblies and polymer beads as templates for the growth of spiky nanoshells. Various shapes of spiky metal nanoshells were prepared in addition to spherical nanoshells by using block copolymer assemblies such as rod-like micelles, vesicles, and bilayers as templates. Furthermore, spiky gold shells encapsulating magnetic nanoparticles or quantum dots were prepared based on the ability of block copolymers to self-assemble with various types of nanoparticles and molecules. The capability to encapsulate other materials in the core, the shape tunability, and the highly structured surface of spiky nanoshells should benefit a range of imaging, sensing, and medical applications of metal nanostructures.     

Surface segregation of polypeptide-based block copolymer micelles: An approach to engineer nanostructured and stimuli responsive surfaces

We describe the surface segregation of polypeptide-based block copolymer micelles to produce stimuli-responsive nanostructures at the polymer blend/air interface. Such structures were obtained by simultaneous surface migration and self assembly at the surface of diblock copolymer/homopolymer blends. We employed blends composed of homopolymer (PS) and an amphiphilic block copolymer polystyrene-b-poly(l-glutamic acid) (PS-b-PGA). The surface was functionalized based on the preferential segregation to the polymer blend/air interface of the hydrophilic PGA block of the diblock copolymer upon annealing to water vapor. The surface migration of the diblock copolymer to the interface was demonstrated both by XPS and contact angle measurements. As a consequence, the PGA interfacial attraction leads to a large surface excess on diblock copolymer which in turn, through macrophase and microphase separation, produced separated domains at the surface with regions composed either of homo or block copolymer. Herein we demonstrate that the use of asymmetric diblock copolymers with a higher content in PS lead to spherical micellar assemblies randomly distributed at the surface. As observed by AFM imaging the blend composition, i.e. the amount of block copolymer within the blend influences the density of micelles at the surface. Finally, when exposed to water, the pH affects the surface morphology. The PGA segments are collapsed at low pH values and extended at pH values above 4.8, thus inducing variations on the topography of the films at the nanometer scale.     

Spontaneous formation of gold nanoparticles in poly(ethylene oxide)-poly(propylene oxide) solutions: solvent quality and polymer structure effects

We report here on the effects that the solution properties of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers have on the reduction of hydrogen tetrachloroaurate(III) hydrate (HAuCl4.3H2O) and the size of gold nanoparticles produced. The amphiphilic block copolymer solution properties were modulated by varying the temperature and solvent quality (water, formamide, and their mixtures). We identified two main factors, (i) block copolymer conformation or structure (e.g., loops vs entanglements, nonassociated polymers vs micelles) and (ii) interactions between AuCl4- ions and block copolymers (attractive ion-dipole interactions vs repulsive interactions due to hydrophobicity), to be important for controlling the competition between the reactivities of AuCl4- reduction in the bulk solution to form gold seeds and on the surface of gold seeds (particles) and the particle size determination. The particle size increase observed with increased temperature in aqueous solutions is attributed to enhanced hydrophobicity of the block copolymer, which favors AuCl4- reduction on the surface of seeds. The lower reactivity and higher particle sizes observed in formamide solutions are attributed to the shielding of ion-dipole interaction between AuCl4- ions and block copolymers by formamide, which overcomes the beneficial effects of formamide on the block copolymer conformation (lower micelle concentration).     

Micelle-encapsulated carbon nanotubes: a route to nanotube composites

We report a general approach toward dispersing single-walled carbon nanotubes (SWNTs) in solvents and polymer materials, by encapsulating SWNTs within cross-linked micelles. Micelles made from polystyrene-block-poly(acrylic acid) (PS-b-PAA), an amphiphilic block copolymer, are first assembled around SWNTs by gradually adding H2O to a suspension of nanotubes in dimethylformamide. The hydrophilic, outer shells of these micelles are then chemically cross-linked with a difunctional linker molecule. Pure encapsulated SWNTs (e-SWNTs) can then be separated from empty cross-linked micelles by consecutive cycles of centrifugation and redispersion. Atomic force and transmission electron microscopies of the resulting nanostructures demonstrate that individual nanotubes (rather than bundles) have been completely encased in polymer shells whose thickness is slightly larger than that of empty micelles. e-SWNTs encapsulated in PS-b-PAA can be permanently redispersed in H2O, in organic solvents, and in both hydrophobic and hydrophilic polymer matrices with minimal sonication. Micelle encapsulation could improve the compositing of SWNTs in a wide variety of polymer materials for structural, electronic, and thermal applications.     

Spontaneous generation of amphiphilic block copolymer micelles with multiple morphologies through interfacial Instabilities

We introduce a method for the formation of block copolymer micelles through interfacial instabilities of emulsion droplets. Amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) copolymers are first dissolved in chloroform; this solution is then emulsified in water and chloroform is extracted by evaporation. As the droplets shrink, the organic solvent/water interface becomes unstable, spontaneously generating a new interface and leading to dispersion of the copolymer as micellar aggregates in the aqueous phase. Depending on the composition of the copolymer, spherical or cylindrical micelles are formed, and the method is shown to be general to polymers with several different hydrophobic blocks: poly(1,4-butadiene), poly(-caprolactone), and poly(methyl methacrylate). Using this method, hydrophobic species dissolved or suspended in the organic phase along with the amphiphilic copolymer can be incorporated into the resulting micelles. For example, addition of PS homopolymer, or a PS-PEO copolymer of different composition and molecular weight, allows the diameter and morphology of wormlike micelles to be tuned, while addition of hydrophobically coated iron oxide nanoparticles enables the preparation of magnetically loaded spherical and wormlike micelles.     

The Hybrids of Polystyrene-block-Poly(ethylene Oxide) Micelles and Sodium Dodecyl Sulfate in Aqueous Solutions: Interaction with Rh Ions and Rh Nanoparticle Formation

The interaction of amphiphilic block copolymer, polystyrene-block-poly(ethylene oxide) (PS-b-PEO), with anionic surfactant, sodium dodecyl sulfate (SDS), in aqueous media has been studied by sedimentation in ultracentrifuge. Three well-defined populations of hybrid aggregates corresponding to micelles, micellar clusters, and supermicellar aggregates were detected in the PS-b-PEO/SDS aqueous solutions at various rotation rates. Parameters of all the micellar aggregates were characterized depending on the SDS loading. An increase in the SDS loading was found to result in an increase in block copolymer/surfactant micelle size and weight at the SDS concentration of 0.8x10(-3) mol/L and in a slight decrease of both parameters at critical micelle concentration and at higher concentration. This decrease was caused by incorporation of SDS molecules in block copolymer micelles followed by charging the PS core and repulsion between similar charges. Using dichlorotetrapyridine rhodium(III)chloride hexahydrate ([Rh(Py)(4)Cl(2)]Clx6H(2)O), ion exchange of surfactant counterions in the hybrid PS-b-PEO/SDS system for Rh cations was carried out, which allowed saturating the micellar structures with Rh species. Subsequent reduction of the Rh-containing hybrid solutions with NaBH(4) resulted in the formation of Rh nanoparticles with a diameter of 2-3 nm mainly located in the block copolymer micellar aggregates. Copyright 2000 Academic Press.     

Multifunctional yolk-shell nanoparticles: a potential MRI contrast and anticancer agent

We report a new type of multifunctional nanomaterials, FePt@Fe2O3 yolk-shell nanoparticles, that exhibit high cytotoxicity originated from the FePt yolks and strong MR contrast enhancement resulting from the Fe2O3 shells. Encouraged by the recently observed high cytotoxicity of FePt@CoS2 yolk-shell nanoparticles, we used Fe2O3 to replace CoS2 as the shells to further explore the applications of the yolk-shell nanostructures. The ultralow IC50 value (238 +/- 9 ng of Pt/mL) of FePt@Fe2O3 yolk-shell nanoparticles likely originates from the fact that the slow oxidation and release of FePt yolks increases the cytotoxicity. Moreover, compared with two commercial magnetic resonance imaging (MRI) contrast agents, MION and Sinerem, the FePt@Fe2O3 yolk-shell nanoparticle showed stronger contrast enhancement according to their apparent transverse relaxivity values (r2* = 3.462 (microg/mL)(-1) s(-1)). The bifunctional FePt@Fe2O3 yolk-shell nanoparticles may serve both as an MRI contrast agent and as a potent anticancer drug. This work indicates that these unique yolk-shell nanoparticles may ultimately lead to new designs of multifunctional nanostructures for nanomedicine.     

Monolayer-protected gold nanoparticles by the self-assembly of micellar poly(ethylene oxide)-b-poly(epsilon-caprolactone) block copolymer

A study is presented of the preparation of gold nanoparticles incorporated into biodegradable micelles. Poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) copolymer was synthesized by ring-opening polymerization, and the hydroxyl end group of the PCL block was modified with thioctic acid using dicyclohexyl carbodiimide as the coupling reagent. The PEO-b-PCL-thioctate ester (TE) thus obtained was used in a later step to form monolayer protected gold nanoparticles via the thioctate spacer. Gold nanoparticles stabilized with the PEO-b-PCL block (named Au/Block (x/y), where x/y is the mole feed ratio between HAuCl4 and PEO-b-PCL-TE) were prepared and analyzed. Au/Block (1/1), Au/Block (2/1), and Au/Block (3/1) nanoparticles were found to form stable dispersions in the organic solvents commonly used to dissolve the unlabeled block copolymer. The average diameter of the nanoparticles was determined by transmission electron microscopy (TEM) and found to be 6+/-2 nm. Au/Block (4/1) nanoparticle dispersions in organic solvents, on the other hand, were not stable and produced large gold clusters (50-100 nm). Cluster formation was attributed to the low grafting density of the block copolymer, which facilitates agglomeration. For Au/Block (12/1), along the same trend, only an insoluble product was isolated. Micelles in water were prepared by the slow addition of the dilute Au/Block solution in dimethylformamide into a large excess of water with vigorous stirring. Au/Block (1/1) and Au/Block (2/1) formed nanosized structures of 5-7 nm. TEM images of stained Au/Block (1/1) micelles, made in water, clearly showed the formation of core-shell structures. Au/Block (3/1) micelles, on the other hand, were not stable and large agglomerates a few microns in size were observed. The study focuses on the synthesis, characterization, and aggregation behavior of gold-loaded PEO-b-PCL block copolymer micelles, a potential system for drug delivery in conjunction with tissue and subcellular localization studies.     

Ordered complex nanostructures from bimodal self-assemblies of diblock copolymer micelles with solvent annealing

We report the formation of ordered complex nanostructures from single-layered films of mixtures of polystyrene-poly(2-vinylpyridine) (PS-P2VP) and polystyrene-poly(4-vinylpyridine) (PS-P4VP) diblock copolymer micelles by THF (tetrahydrofuran) annealing. We first examined the influence of THF vapor on PS-P2VP and PS-P4VP micelles in their single-layered films. Due to the different solubility of PS-P2VP and PS-P4VP copolymers in THF, a hexagonal array of PS-P2VP micelles was changed into cylindrical nanodomains, but that of PS-P4VP micelles was not changed. The different influence of THF on PS-P2VP and PS-P4VP micelles was combined in single-layered films of mixtures of both micelles. For the purpose, we prepared mixture solutions of independently prepared small PS-P2VP and large PS-P4VP micelles. Then, bimodal self-assemblies of micelles were prepared from the mixtures, for which the hexagonal array of large PS-P4VP micelles was surrounded by small PS-P2VP micelles. When the bimodal self-assembly was annealed by THF vapor, PS-P2VP micelles were transformed into cylindrical nanodomains, but their reorganization was guided by hexagonally arranged PS-P4VP micelles. As a result, we were able to produce ordered complex nanostructures in the form of a hexagonal array of PS-P4VP micelles surrounded by PS-P2VP cylinders, which was further utilized for the synthesis of Au nanoparticles.     

Thermogelling properties of triblock copolymers in the presence of hydrophilic fe(3)o(4) nanoparticles and surfactants

We investigate the supramolecular structure formed by thermogelation of a triblock polymer in the presence of nanoparticles and surfactant using rheometry and small-angle X-ray scattering (SAXS). The triblock copolymer, nanoparticle, and surfactant used in this study are poly(oxyethylene-oxypropylene-oxyethylene), Pluronic F108, Fe(3)O(4) nanoparticles, and sodium dodecyl surfactant, respectively. Addition of 1-5 wt % of Fe(3)O(4) nanoparticle, of average particle size ～10 nm, in a weak template of F108 (15 wt %) shows a decrease in the onset of gelation temperature and dramatic alteration in the viscoelastic moduli. The nanocomposite samples show a linear viscoelastic regime up to 5% strain. The SAXS measurement shows that the intermicellar spacing of the supramolecular structure of pure F108 is ～16.5 nm, and the supramolecular structure is destroyed when nanoparticles and surfactants are incorporated in it. Further, the addition of anionic surfactant to nanocomposites leads to a dramatic reduction in the viscoelastic properties due to strong electrostatic barrier imparted by the surfactant headgroup that prevents the formation of hexagonally ordered micelles. Our results show that the thermogelation is due to the clustering of nanoparticles into a fractal network rather than a close-packed F108 micelles, in agreement with the recent findings in Pluronic F127-laponite systems.     

Polymeric micelles and nanoparticles from block and statistical poly((RS)-3,3-dimethylmalic acid) derivatives: preparation and characterization

Amphiphilic and biodegradable micelles and nanoparticles designed as potential drug carriers were prepared from biodegradable statistical and block copolyesters obtained by a living anionic ring-opening process. These novel materials display amphiphilic properties arising from the joint presence of hydrophilic poly((RS)-3,3-dimethylmalic acid) and hydrophobic poly(hexyl (RS)-3,3-dimethylmalate) segments. Micelles obtained from a well-defined block copolymer have been characterized by their critical aggregation concentration, and nanoparticles derived from statistical copolymer have been analyzed by transmission electron microscopy (TEM).     

Effect of hydrophobicity inside PEO-PPO-PEO block copolymer micelles on the stabilization of gold nanoparticles: experiments

In this paper we present the effect of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer micelles and their hydrophobicity on the stabilization of gold nanoparticles. Gold nanoparticles were prepared by a method developed by Sakai et al. (Sakai, T.; Alexandridis, P. Langmuir 2004, 20, 8426). An absorption centered at 300-400 nm in time-dependent UV spectra provided evidence that the very first step of the synthesis was to form primary gold clusters. Then the gold clusters grew in size and were stabilized by block copolymer micelles. The stabilization capacities of the micelles were modulated by tuning the block copolymer concentration and composition and by adding salts. With good stabilization, gold particles were spherical and uniform in size with a diameter of 5-10 nm. Otherwise they were aggregates with irregular shapes such as triangular, hexagonal, and rodlike. The presence of a small amount of NaF significantly increased the stabilization capacity of the micelles and consequently modified the quality of the gold particles. Using FTIR and 1H NMR spectroscopy, micellization of the block copolymers and hydrophobicity of the micelles were proven very important for the stabilization. A higher hydrophobicity of the micelle cores was expected to favor the entrapment of primary gold clusters and the stabilization of gold nanoparticles.     

Crystallization‐Driven Self‐Assembly of Rod–Coil–Rod Pseudopolyrotaxanes into Spherical Micelles,Nanorods, and Nanorings in Aqueous Solutions

A novel rod‐containing block copolymer is constructed by supramacromolecular self‐assembly of α‐cyclodextrin and a triblock copolymer with methoxy polyethylene glycol as the flanking chains and the midterm block alternately connected by 2,2‐dimethylolbutyric acid and isophorone diisocyanate. The assembled rod‐containing block copolymer shows an exciting phenomenon of concentration‐ and pH‐dependent morphological switching of well‐defined nanostructures. In the solutions at pH 9.2, spherical micelles, rod‐like micelles, and hydrogel are observed successively with an increase of the concentration. Notably, the rod‐like micelles are composed of spherical segments due to the combination of the crystalline cores of the spherical micelles. In addition, 1D nanostructures with different curvatures from linear rod‐like micelles (pH 9.2) to ring‐shaped micelles (pH 7.5) can be obtained by controlling the pH values of the assembled systems.

     

Optically active core/shell nanoparticles prepared using self‐assembled polymer micelle as reactive nanoreactor

This article reports on optically active core/shell nanoparticles constituted by chiral helical polymers and prepared by a novel approach: using self‐assembled polymer micelles as reactive nanoreactors. Such core/shell nanoparticles were composed of optically active helical‐substituted polyacetylene as the core and thermosensitive poly(N‐isopropylacrylamide) as the shell. The synthetic procedure is divided into three major steps: (1) synthesis of amphiphilic diblock copolymer bearing polymerizable C[tbond]C bonds via atom transfer radical polymerization, followed by (2) self‐assembly of the diblock copolymer to form polymer micelles; and (3) catalytic emulsion polymerization of substituted acetylene monomer conducted using the polymer micelles as reactive nanoreactors leading to the core/shell nanoparticles. The core/shell nanoparticles simultaneously exhibited remarkable optical activity and thermosensitivity. The facile, versatile synthesis methodology opens new approach toward preparing novel multifunctional core/shell nanoparticles.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Fabrication of an open Au/nanoporous film by water-in-oil emulsion-induced block copolymer micelles

Water-in-oil (W/O) emulsion-induced micelles with narrow size distributions of approximately 140 nm were prepared by sonicating the polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer in the toluene/water (50:1 vol %). The ordered nanoporous block copolymer films with the hydrophilic P2VP interior and the PS matrix were distinctly fabricated by casting the resultant solution on substrates, followed by evaporating the organic solvent and water. The porous diameter was estimated to be about 70 nm. Here, we successfully prepared the open nanoporous nanocomposites, the P2VP domain decorated by Au (5+/-0.4 nm) nanoparticles based on the methodology mentioned. We anticipate that this novelty enhances the specific function of nanoporous films.     

Morphology transformation of hybrid micelles self-assembled from rod-coil block copolymer and nanoparticles

Hybrid polymeric micelles self-assembled from a mixture containing poly(γ-benzyl-L-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) block copolymer and gold nanoparticles (AuNPs) were prepared. The effect of AuNPs on the self-assembly behavior of PBLG-b-PEG was studied both experimentally by transmission electron microscopy, scanning electron microscopy, and laser light scattering and computationally using dissipative particle dynamics (DPD) simulations. It was found that, the pure PBLG-b-PEG block copolymer self-assembles into long cylindrical micelles. By introducing AuNPs to the stock block copolymer solution, the formed aggregate morphology transforms to spherical micelles. The DPD simulation results well reproduced the morphological transformations observed in the experiments. And the simulation revealed that the main reason for the aggregate morphology transformation is the breakage of ordered packing of PBLG rods in micelle core by the added nanoparticles. Moreover, from the DPD simulations, the distribution information on nanoparticles was obtained. The nanoparticles were found to prefer to locate near the core/shell interface as well as in the core center of the micelles. The combination of experimental and simulation methods lead to a comprehensive understanding of such a complex self-assembly system.