三维四嗪基多孔共价有机骨架材料的合成及其吸附性能（英文）

通过半刚性单体四(4-氰基氧甲基)甲烷(T-4-CPMM)和水合肼在单质硫催化下发生聚合反应,成功合成了四嗪基三维多孔共价有机骨架材料Tzc-COF-1(1).这是首例使用半刚性单体制备多孔共价有机骨架材料.此外,还研究了该化合物的热稳定性及其气体的吸附性质.     

共价有机骨架聚合物(COFs)的应用研究进展

共价有机骨架聚合物(COFs)是一类结晶微孔聚合物,具有优异的孔性质、高的热及化学稳定性和大的比表面积,在气体储存、催化、光电材料等诸多领域中有重要的应用前景,已成为国内外的研究热点。本文主要综述了共价有机骨架聚合物对氢气、甲烷、二氧化碳等气体的吸附与储存,并介绍了共价有机骨架聚合物近几年在非均相催化、光电材料、重金属离子吸附、光催化制氢等方面的应用所取得的重要进展。文章最后总结了当前共价有机骨架聚合物遇到的一些问题,并对该领域未来发展趋势进行了展望。     

咪唑类高铼酸盐催化微晶纤维素降解反应研究

以咪唑类高铼酸盐为催化剂,以离子液体1-烯丙基-3-甲基咪唑氯盐([Amim]Cl)为溶剂降解微晶纤维素(MCC)。分别考察反应温度、反应时间、反应物浓度、催化剂用量和结构对纤维素降解反应的影响。结果表明,以5%1-(3-磺酸)丙基-3-甲基咪唑高铼酸盐([mim-(CH_2)_3SO_3H]ReO_4)为催化剂,在微波辅助加热条件下,0.1 g纤维素在2.0 g离子液体[Amim]Cl中于160℃降解30 min,还原糖收率(TRS)和葡萄糖收率最高可达89.6%和46.7%。研究还对咪唑类高铼酸催化纤维素降解反应的催化机理进行讨论,认为催化剂芳环阳离子、ReO-4中Re=O与纤维素分子中羟基的相互作用是促进纤维素降解的关键     

手性多孔材料在色谱分离分析中的应用

手性多孔有机骨架材料(Chiral porous organic frameworks,CPOFs)具有孔性质优异、比表面积高、稳定性好以及易功能化等诸多优点,已经在手性催化、识别和分离等领域中得到应用。手性多孔有机骨架材料主要有手性金属-有机骨架材料(Chiral metal-organic frameworks,CMOFs)和手性共价有机骨架材料(Chiral covalent organic frameworks,CCOFs)及其他材料,这类材料具有特殊的手性识别、吸附作用,在色谱分离分析领域中已成为研究热点之一。该文综述了手性多孔材料的合成及其在色谱分离和选择性吸附中的应用,展望了未来CPOFs材料可能的应用与发展方向。     

手性樟脑衍生的共价有机骨架材料用作高效液相色谱固定相分离手性化合物

共价有机骨架材料（COFs）作为一种新型的晶体多孔材料,其手性共价骨架材料在手性分离领域具有良好的应用前景。本文以1,3,5-三醛基间苯三酚（Tp）和3,3′-二硝基联苯胺（BD）反应合成出TpBD（NH₂）₂,并以此作为基本共价有机骨架。用（1S）-（+）-10-樟脑磺酰氯对该骨架进行衍生修饰,制备出手性共价有机骨架材料TpBD（NH₂）₂的（1S）-（+）-10-樟脑磺酰氯（Cam）衍生物（TpBD-1S-（+）-Cam）。结果表明,制备的手性共价有机骨架材料TpBD-1S-（+）-Cam能够分离华法林、马来酸氯苯那敏、阿替洛尔、美托洛尔、佐匹克隆、1-（9-蒽基）-2,2,2-三氟乙醇、1,2-二苯乙醇酮、酮洛芬、盐酸美西律和噻吗洛尔共10种外消旋体以及o,m,p-溴苯胺、o,m,p-碘苯胺2种苯系位置异构体,分离效果较好。该材料用作高效液相色谱固定相具有良好的开发潜力和应用价值。     

亚胺类共价有机骨架材料在样品前处理中的应用

亚胺类共价有机骨架(I-COFs)是有机单体根据席夫碱(Schiff-base)反应原理缩合形成的一类新型多孔晶体有机材料.I-COFs具有骨架密度低、比表面积大、孔隙率高、单体种类丰富、孔径尺寸可控、结构可功能化、合成方法多样和物化稳定性好等优点.近年来,I-COFs已成为材料科学领域的研究前沿,并广泛用于气体吸附、...     

从分立多孔有机笼构建基于笼的三维框架材料显现出CO_2吸附增强

正多孔有机笼(Porous Organic Cage)是近年来出现的一类新型多孔材料~(1–4),与分子筛、金属有机骨架材料(MOFs)、共价有机骨架材料(COFs)等二维或三维框架多孔材料不同,多孔有机笼是分立的晶体材料,分立的构筑单元多通过弱相互作用堆积成有序多孔结构,其孔隙由笼内空腔和堆积贯通孔组成。与此同时,多孔有机笼还具备良好的可溶性,多孔有机笼在气体吸附,小分子选择     

As(Ⅴ)离子印迹有机-无机杂化材料的制备及其对As(Ⅴ)的选择性吸附

采用水热辅助表面印迹技术,制备了氨基功能化As(V)离子印迹有机-无机杂化材料,利用红外光谱和扫描电镜表征了其形貌和表面官能团,采用平衡吸附法研究了印迹杂化材料对As(V)的吸附行为及机理,计算了等温吸附模型和吸附动力学的参数。研究结果表明：水热辅助表面印迹法可以显著提高印迹杂化材料的吸附容量,在20 °C时,吸附量达到47.5 mg?g-1;在20 °C条件下,吸附平衡时间为30 min;在pH值4-9范围内,pH值对吸附容量没有显著性影响;离子印迹杂化材料显示出优异的选择性;离子印迹杂化材料再生五次后, As(V)的吸附容量没有大幅降低;As(V)离子在离子印迹杂化材料的吸附过程符合 Langmuir和准二级动力学模型。     

多孔有机骨架材料对顺式二醇化合物富集分离的研究进展

基于在碱性环境下硼酸能与顺式二醇化合物可逆共价结合形成稳定的五元或六元环酯,而在酸性环境下环酯开环释放顺式二醇化合物这一特性,设计合成高效、高选择性、高富集性能的硼亲和材料的研究备受关注。近年来,许多研究工作者合成了各种类型的硼亲和材料,应用于高选择性富集顺式二醇化合物。金属有机骨架(MOFs)和共价有机骨架(COFs)由于具有孔径可调、高孔隙率、高比表面积、骨架结构可调和化学及热稳定性良好等特点,被广泛应用于色谱分离和样品前处理领域。为赋予MOFs和COFs材料对顺式二醇化合物的富集选择性,各种不同结构和不同种类的硼酸修饰的MOFs和COFs被合成出来。该综述主要是对近几年来80余篇源于科学引文索引关于硼酸功能化MOFs和COFs的种类、合成方法及其应用文章的总结,包括“金属配体-片段共组装”“合成后修饰”和“自下而上”的硼酸功能化多孔材料的修饰策略,以及硼酸功能化MOFs和COFs的种类,介绍了其在化学分析和生物分析领域的发展概况和应用前景,客观评价了硼酸功能化MOFs和COFs的区别和优缺点。该文旨在让研究人员能够充分了解近几年硼酸功能化多孔有机骨架材料的研究现状、掌握合成思路和方法,为其应用提供一定的理论指导和技术支撑,为加快硼酸功能化多孔有机骨架材料的商业化脚步贡献绵薄之力。     

胆固醇分子印迹聚合有机凝胶的制备及其选择性吸附研究

以N-十八烷基马来酰胺酸(ODMA)为凝胶剂,在甲基丙烯酸β-羟乙酯、甲基丙烯酸、聚乙二醇二甲基丙烯酸酯和模板分子3-胆固醇酰氧基丙酸(COPA)混合物中自组装形成稳定的超分子有机凝胶,经UV原位光聚合,乙腈提取模板分子制备了胆固醇非共价印迹聚合有机凝胶.吸附实验在水/THF中进行.结果显示胆固醇非共价印迹聚合有机凝胶...     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.