Co3O4/CeO2 CO氧化的原位红外光谱研究

采用沉淀氧化法制备了Co₃O₄/CeO₂催化剂。分别在干、湿条件下进行了一氧化碳氧化反应研究。运用FT-IR表征手段,在钴铈复合氧化物上进行了CO吸附及CO/O₂共吸附研究。结果表明,与纯的Co₃O₄样品相比,Co₃O₄/CeO₂具有明显的抗湿气能力。Co₃O₄/CeO₂催化剂在进行CO氧化时,表面形成了类碳酸盐物种。当环境温度低于453 K时,催化剂上类碳酸盐的生成与形成类碳酸盐物种后受热分解存在着动态平衡。当环境温度高于493 K,催化剂上生成的类碳酸盐物全部受热分解。氧化铈的加入提高了催化剂的抗湿气性能。较小粒径的Co₃O₄与CeO₂产生的强相互作用可使CeO₂向Co₃O₄提供氧,因而间接提供了CO氧化需要的氧。     

铈基与钴基Co3O4-CeO2氧载体上甲烷化学链转化特性: 产物选择性控制

采用水热法制备了Co₃O₄/CeO₂(x)[x为钴铈原子摩尔比n(Co):n(Ce)=6:49:1]和Ce_1-yCo_yO_2-δ(y=0.10.4)2个系列复合氧化物, 并表征了材料的物理化学性质, 考察了这些氧化物作为氧载体参与甲烷化学链转化(化学链燃烧和化学链部分氧化)的反应性能. 结果表明, 2类复合氧化物的甲烷反应活性均明显优于单一氧化物CeO₂或Co₃O₄, 但2类氧载体上的甲烷反应产物的选择性具有明显差异. Ce_1-yCo_yO_2-δ氧载体形成了Ce-Co-O固溶体, 储氧能力明显增强, 体相晶格氧迁移速率与甲烷活化速率匹配较好, 甲烷反应产物以CO和H₂的合成气为主, 有利于甲烷的化学链部分氧化. Co₃O₄/CeO₂(x)氧载体中CeO₂与Co₃O₄之间的相互作用改善了材料的储氧能力和氧化活性, 其与甲烷反应时主要生成CO₂, 有利于甲烷化学链燃烧. 连续性化学链循环实验表明, 2类氧载体均具有较好的再生性能和循环稳定性.     

Co3O4/CeO2的氧化还原性能及反应条件对其CO氧化活性的影响

采用沉淀氧化法制备了Co₃O₄/CeO₂催化剂。运用XRD、BET和TPR表征手段,考察了不同钴铈比及焙烧温度对钴铈复合氧化物物理及化学性能的影响,并分别在干、湿条件下进行了一氧化碳氧化反应研究。结果表明,与纯的Co₃O₄相比,在不同比例的Co₃O₄/CeO₂均经723 K焙烧的各种催化剂中,钴铈原子比为9∶1的复合氧化物粒径较小,比表面积较大,说明适当比例铈的添加能使Co₃O₄具有较小的粒径。此氧化物经538 K温度焙烧制得的钴铈比为9∶1的复合氧化物中Co₃O₄平均粒径为7.2 nm, BET比表面积为167.6 m²/g。经TPR考察发现其具有最优的氧化还原性能。     

铈铁锆三元复合氧化物上碳烟的催化燃烧

采用水热法制备了纯CeO₂、Fe₂O₃和系列Ce₀.5Fe₀.5-xZr_{xO2复合氧化物催化剂,采用XRD、Raman、H2-TPR和BET等方法对其进行了表征,并利用程序升温氧化反应(TPO)技术研究了其碳烟燃烧催化性能。结果表明,Zr⁴+完全进入CeO2晶格中形成了固溶体,而Fe³+较难进入CeO2晶格中,部分Fe2O3分散在固溶体表面。固溶体形成产生的氧空位和表面高度分散的氧化铁协同作用是铈铁锆三元复合氧化物具有较高碳烟燃烧催化性能的关键。同时,与单纯的铈铁二元复合氧化物相比,Zr⁴+的掺杂明显提高了催化剂的抗老化能力,使Ce0.5Fe0.5-xZrxO2复合氧化物显示出更好的应用前景。在系列样品中,Ce0.5Fe0.30Zr0.20O2样品由于形成了最多的固溶体并具有良好分散性的表面Fe2O3,显示出最好的催化活性和稳定性。其催化碳烟的起燃温度(ti)和峰顶温度(tp)分别为251℃和310℃,长时间高温老化后其ti和tp仍较低,分别为273℃和361℃。}     

Ce/Co比对Ag/CeO2-Co3O4催化剂低温氧化降解甲醛性能的影响

采用共沉淀法制备了一系列具有不同Ce/Co比的Ag/CeO₂-Co₃O₄催化剂,对其在甲醛低温氧化降解中的催化性能进行了研究。结果发现,Ag/CeO₂-Co₃O₄催化剂具有较好的甲醛低温降解活性,而Ce/Co比是影响其催化性能的一个重要因素。XRD、氮吸附-脱附、Raman光谱、H₂-TPR和in-situ DRIFTS等表征结果表明,随着Co含量的增加,Ag/CeO₂-Co₃O₄催化剂的孔体积随之增大,而比表面积减小。CeO₂有利于Ag/CeO₂-Co₃O₄催化剂的氧化还原性能提高,促进氧空位增加,提升Co²⁺的含量,从而有利于氧分子的活化,促进甲醛降解。同时,in-situ DRIFTS结果表明,甲酸盐物种的分解是甲醛在Ag/CeO₂-Co₃O₄催化剂表面催化氧化降解的速控步骤。     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

负载型LaCoO3/MO2催化氧化甲苯与NO的性能研究

本研究采用柠檬酸溶胶-凝胶法制备了一系列不同载体负载的LaCoO₃/MO₂催化剂（M=Zr、Ti、Ce）,研究考察其催化氧化甲苯与NO的性能及关键机制。结果发现,以CeO₂为载体的LaCoO₃/CeO₂催化剂表现出最佳的催化氧化性能,其甲苯的t₉₀为245℃,同时在300℃时NO转化率可达68%。通过BET、XRD、H₂-TPR和XPS对各负载型钙钛矿催化剂的理化性质进行表征。结果表明,负载型钙钛矿催化剂拥有更大的比表面积,从而有效提供了更多的吸附位点,同时负载型钙钛矿催化剂具有更活跃的晶格氧和更好的氧化还原性能。其中,LaCoO₃与载体CeO₂在接触界面上观察到Co离子与Ce离子之间存在着相互作用,形成晶格缺陷,这有利于氧空位的形成。利用原位漫反射红外光谱进一步探寻了反应机理,LaCoO₃/CeO₂催化剂上NO氧化符合Langmuir-Hinsh...     

柴油机尾气碳颗粒燃烧中La-Mn-Fe-Cu/HZSM-5的催化性能

采用柠檬酸络合浸渍法制备分子筛负载钙钛矿型金属复合氧化物催化剂。采用XRD、SEM、XPS和H₂-TPR等手段对催化剂性能进行表征,并在微型固定床反应器中对催化剂进行活性评价。结果表明,B位离子由多种金属离子组成的催化剂,可使碳颗粒燃烧温度降低,生成CO₂的选择性高。B位离子种类及配比直接影响催化剂性能,Cu离子加入可提高生成CO₂的选择性,Co离子加入可降低碳颗粒燃烧温度,调节Fe/Mn离子摩尔比可以改善碳颗粒燃烧温度和生成CO₂的选择性。其中,LaMn_0.2Fe_0.7Cu_0.1O₃/HZSM-5催化剂性能较好,碳颗粒燃烧温度较低,T_ig、T_m和T_f分别为236.6、419.0和458.7 ℃,生成CO₂选择性较高,为88.3%。     

CeO2-MnOx催化剂形貌对低浓度甲烷催化燃烧反应性能的影响

采用水热合成法制备了船形、扁球形及纳米片CeO₂-MnO_x复合氧化物。并运用低温N₂吸脱附、XRD、SEM、TEM、H₂-TPR、拉曼光谱、XPS等表征技术对不同形貌CeO₂-MnO_x复合氧化物的结构与其低浓度CH₄催化燃烧反应性能之间的关系进行了关联。结果表明,CeO₂-MnO_x复合氧化物的形貌与其催化性能密切相关。其中,扁球形CeO₂-MnO_x复合氧化物的氧空位、Ce³⁺含量及表面吸附活性氧物种最多,其CH₄催化燃烧反应活性最高,540℃时,可将CH₄完全转化;其次是船形CeO₂-MnO_x复合氧化物催化剂,540℃时其CH₄转化率为94.05%;与前两者相比,纳米片CeO₂-MnO_x复合氧化物催化剂的氧空位及表面吸附活性氧物种较少,活性较差,相同反应温度下,其CH₄转化率仅为89.68%。     

以金属有机骨架为牺牲模板制备MnOx-CeO2及其催化氧化

以均苯三甲酸合铈-金属有机骨架(CeBTC-MOF)作为模板制备系列不同Mn含量的MnO_x-CeO₂催化剂,用于甲苯催化氧化。应用X射线衍射(XRD)、N₂物理吸附-脱附、热重分析(TG)、元素分析(EA)、电感耦合等离子体发射光谱法(ICP-OES)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)、拉曼光谱(Raman)和紫外可见漫反射(UV-vis)等手段对催化剂进行了表征。结果表明,通过MOF模板法制备的复合氧化物具备棒状形貌、高度分散、高比表面积和纳米晶体颗粒等特征。Mn在引入MOF的过程中,一部分进入CeO₂晶格形成固溶体,另一部分则分散在CeO₂表面,且分散的Mn分为单层分散态和晶相态。其中,CeO₂载体表面和Mn分散物之间的强相互作用是影响活性的重要因素。当表面分散的Mn低于单层分散阈值6.2%时,Mn以嵌入模型的形式与表面CeO₂发生强相互作用,有效促进催化剂的还原从而提高活性;当表面分散的Mn超过单层分散阈值6.2%时,载体表面形成Mn₃O₄晶相结构,对活性无明显促进作用。     

硫中毒对Co3O4/CeO2复合氧化物上炭黑催化燃烧的影响

采用共沉淀法制备了CeO₂,Co₃O₄和一系列Co₃O₄/CeO₂复合氧化物催化剂,在400 ℃下含SO₂的氧化气氛中对催化剂进行了硫中毒处理,通过原位红外光谱、X射线衍射、程序升温脱附和X射线光电子能谱对新鲜和硫中毒的样品进行了表征. 结果表明,所有测试的硫中毒样品上均形成了硫酸盐,CeO₂上累积的硫酸盐明显比Co₃O₄上的多,Co₃O₄/CeO₂复合氧化物在硫中毒过程中形成了硫酸钴和硫酸铈. 对新鲜和硫化样品在NO/O₂气氛下进行了催化炭黑燃烧实验,发现Co₃O₄/CeO₂复合氧化物的活性和抗硫性能优于CeO₂,但抗硫性能低于Co₃O₄.     

The Solid-State-Grinding Synthesis of Maganese-Modified Cobalt Oxides and Application in the Low-Temperature CO Preferential Oxidation in H<Subscript>2</Subscript>-Rich Gases

A series of MnOx modified cobalt oxides with different atomic molar ratios of Mn/(Mn?+?Co) were prepared by a soft reactive grinding route and investigated for CO preferential oxidation in H₂. It was found that as-prepared Mn-doped cobalt oxides exhibited superior activity compared to the single constituted oxides, other Mn–Co–O mixed oxides synthesized by solution-based route, and other grinding-derived mixed metal oxides M–Co–O (M?=?Zn, Ni, Cu, Fe). The grinding-derived MnCo10 catalyst with Mn/(Mn?+?Co) molar ration of 10% showed the best CO oxidation activity and higher selectivity at low temperature. The surface richness of Co³⁺ was not found as increasing the Mn molar ratio in the present work. However, the incoporation of MnOx with proper amount into Co₃O₄ could produce high surface area, high structure defects, and rich surface active oxygen species, while the ability to supply the active oxygen species was suggested to play the crucial role in promoting the catalytic performance of Mn–Co–O mixed oxides.     

A Study of Different Doped Metal Cations on the Physicochemical Properties and Catalytic Activities of Ce20M1Ox (M=Zr,Cr, Mn,Fe, Co,Sn) Composite Oxides for Nitric Oxide Reduction by Carbon Monoxide

This work is mainly focused on investigating the effects of different doped metal cations on the formation of Ce₂₀M₁O_x (M=Zr, Cr, Mn, Fe, Co, Sn) composite oxides and their physicochemical and catalytic properties for NO reduction by CO as a model reaction. The obtained samples were characterized by using N₂ physisorption, X‐ray diffraction, laser Raman spectroscopy, UV/Vis diffuse reflectance spectroscopy, inductively coupled plasma atomic emission spectroscopy, X‐ray photoelectron spectroscopy, temperature‐programmed reduction by hydrogen and by oxygen (H₂‐TPR and O₂‐TPD), in situ diffuse reflectance infrared Fourier transform spectroscopy, and the NO+CO model reaction. The results imply that the introduction of M^x+ into the lattice of CeO₂ increases the specific surface area and pore volume, especially for variable valence metal cations, and enhances the catalytic performance to a great extent. In this regard, increases in the oxygen vacancies, reduction properties, and chemisorbed O₂^? (and/or O^?) species of these Ce₂₀M₁O_x composite oxides (M refers to variable valence metals) play significant roles in this reaction. Among the samples, Ce₂₀Cr₁O_x exhibited the best catalytic performance, mainly because it has the best reducibility and more chemisorbed oxygen, and significant reasons for these attributes may be closely related to favorable synergistic interactions of the vacancies and near‐surface Ce³⁺ and Cr³⁺. Finally, a possible reaction mechanism was tentatively proposed to understand the reactions.     

Co3O4−CeO2 Nanocomposites for Low-Temperature CO Oxidation

In an effort to combine the favorable catalytic properties of Co₃O₄ and CeO₂, nanocomposites with different phase distribution and Co₃O₄ loading were prepared and employed for CO oxidation. Synthesizing Co₃O₄-modified CeO₂ via three different sol-gel based routes, each with 10.4 wt % Co₃O₄ loading, yielded three different nanocomposite morphologies: CeO₂-supported Co₃O₄ layers, intermixed oxides, and homogeneously dispersed Co. The reactivity of the resulting surface oxygen species towards CO were examined by temperature programmed reduction (CO-TPR) and flow reactor kinetic tests. The first morphology exhibited the best performance due to its active Co₃O₄ surface layer, reducing the light-off temperature of CeO₂ by about 200 °C. In contrast, intermixed oxides and Co-doped CeO₂ suffered from lower dispersion and organic residues, respectively. The performance of Co₃O₄-CeO₂ nanocomposites was optimized by varying the Co₃O₄ loading, characterized by X-ray diffraction (XRD) and N₂ sorption (BET). The 16–65 wt % Co₃O₄−CeO₂ catalysts approached the conversion of 1 wt % Pt/CeO₂, rendering them interesting candidates for low-temperature CO oxidation.     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

Revealing the unexpected promotion effect of EuOx on Pt/CeO2 catalysts for catalytic combustion of toluene

Pt/Eu₂O₃-CeO₂ materials with different Eu concentrations were prepared and applied to toluene destruction, and the remarkable promotion impact of EuO_x on Pt/CeO₂ can be observed. The characterization results reveal that the presence of EuO_x significantly enhances the redox property, lattice O concentration, and Ce³⁺ ratio of the Pt/CeO₂ material, which facilitates the dispersion and activity of Pt active sites and thus accelerates the decomposition process of toluene. Among all catalysts, a sample with an Eu content of 2.5 at.% (Pt/EC-2.5) possesses the best catalytic activity with 0.09 vol% of toluene completely destructed at 200 °C under a relatively high GHSV of 50000 h^?1. The possible reaction pathway and mechanism of toluene combustion over Pt/Eu₂O₃-CeO₂ samples are presented according to in-situ DRIFTS, which confirms that the toluene oxidation process obeys the Mars-van Krevelen mechanism with aldehydes and ketones as primary organic intermediates.     

纳米片聚结Co3O4微球催化甲苯燃烧

采用乙二胺辅助的水热法制备了纳米片聚结的Co₃O₄微球. 利用多种分析技术表征了其物化性质,并评价了其对甲苯燃烧的催化活性. 结果表明,由添加1.0 ml乙二胺经140 ℃水热处理12 h后制得的Co₃O₄样品呈纳米片聚结的微球状表面形貌. Co₃O₄微球样品的比表面积约为66 m² g^-1. 与体相Co₃O₄样品相比,Co₃O₄微球样品具有较高的氧吸附物种浓度和较好的低温还原性. 当空速为20000 ml g^-1 h^-1时,在Co₃O₄微球样品上甲苯转化率达到50%和90%时的反应温度分别为230和254 ℃. 这与该样品具有较大的比表面积、较高的氧吸附物种浓度和较好的低温还原性相关.     

Preparation of mesoporous CexCoO as highly effective catalysts for toluene combustion: The synergetic effects of structural template and Ce doping

Cobalt‐based catalyst, as a typical catalyst for volatile organic compounds (VOCs) combustion, has attracted extensive attention. However, the catalytic activity of pure Co₃O₄ is difficult to meet the requirements of practical application especially at low temperatures. Therefore, it is key to find an effective way to improve the catalytic performance of Co₃O₄. In this paper, Co₃O₄ is modified by engineering a combination of structural template and Ce dopant. The various characterization results verify that the template agent and the doping of appropriate Ce lead to great changes in the texture property and low temperature reducibility of Co₃O₄, thus resulting in superior catalytic performances of obtained mesoporous Ce_xCoO catalysts. In particular, the best catalyst, Ce_0.05CoO, achieves a toluene conversion of T_90% at 238°C, which is significantly lower than many of the Co‐based catalysts reported in previous literatures. Furthermore, the toluene conversion rate maintains above 90% during 100 h at 238°C. The excellent catalytic performance of Ce_0.05CoO can be attributed to its large specific surface area, uniform pore structure, good low temperature reducibility, and abundant surface oxygen species.     

Mn1-x(Li,Ti)xCo2O4尖晶石型复合氧化物的制备、表征与催化性能

用柠檬酸配位燃烧法合成了Mn_1-x(Li,Ti)_xCo₂O₄系列尖晶石型复合氧化物催化剂，使用FTIR和XRD方法对催化剂结构进行表征，通过程序升温氧化反应(TPO)技术对这些催化剂在模拟柴油机尾气条件下进行同时消除NO_x和柴油碳黑反应的活性评价。结果表明，掺杂Li或Ti后的Mn_1-x(Li,Ti)_xCo₂O₄系列催化剂仍然保持了完整的尖晶石型复合氧化物结构，这些催化剂对同时消除柴油机尾气中的碳黑颗粒和NO_x具有良好的催化性能，其中Li或Ti的掺杂量为x=0.05较佳，结合碳黑燃烧与NO_x还原总的催化效果，Mn_0.95Li_0.05Co₂O₄具有最好的催化活性。     

Flame Spray Pyrolysis for Finding Multicomponent Nanomaterials with Superior Electrochemical Properties in the CoOx‐FeOx System for Use in Lithium‐Ion Batteries

High‐temperature flame spray pyrolysis is employed for finding highly efficient nanomaterials for use in lithium‐ion batteries. CoO_x‐FeO_x nanopowders with various compositions are prepared by one‐pot high‐temperature flame spray pyrolysis. The Co and Fe components are uniformly distributed over the CoO_x‐FeO_x composite powders, irrespective of the Co/Fe mole ratio. The Co‐rich CoO_x‐FeO_x composite powders with Co/Fe mole ratios of 3:1 and 2:1 have mixed crystal structures with CoFe₂O₄ and Co₃O₄ phases. However, Co‐substituted magnetite composite powders prepared from spray solutions with Co and Fe components in mole ratios of 1:3, 1:2, and 1:1 have a single phase. Multicomponent CoO_x‐FeO_x powders with a Co/Fe mole ratio of 2:1 and a mixed crystal structure with Co₃O₄ and CoFe₂O₄ phases show high initial capacities and good cycling performance. The stable reversible discharge capacities of the composite powders with a Co/Fe mole ratio of 2:1 decrease from 1165 to 820 mA h g^?1 as the current density is increased from 500 to 5000 mA g^?1; however, the discharge capacity again increases to 1310 mA h g^?1 as the current density is restored to 500 mA g^?1.