Influence of Triarylamine and Indoline as Donor on Photovoltaic Performance of Dye-Sensitized Solar Cells Employing Cobalt Redox Shuttle

Two organic dyes XS51 and XS52 derivated from triarylamine and indoline are synthesized for dye-sensitized solar cells (DSCs) employing cobalt and iodine redox shuttles. The effects of dye structure upon the photophysical, electro-chemical characteristics and cell performance are investigated. XS51 with four hexyloxyl groups on triarylamine performs better steric hindrance and an improvement of photovoltage. XS52 provides higher short-circuit photocurrent density due to the strong electron-donating capability of indoline unit. The results from the redox electrolyte on cell performances indicate that the synthesized dyes are more suitable for tris(1,10-phenanthroline)cobalt(II/III) redox couple than I^?/I₃^? redox couple in assembling DSCs. Application of XS52 in the cobalt electrolyte yields a DSC with an overall power conversion efficiency of 6.58% under AM 1.5 (100 mW/cm²) irradiation.     

Electron transport analysis for improvement of solid-state dye-sensitized solar cells using poly(3,4-ethylenedioxythiophene) as hole conductors

Dye-sensitized solar cells (DSCs) using solid-state hole conductor, poly(3,4-ethylenedioxythiophene) (PEDOT), were fabricated using in-situ photoelectrochemical polymerization giving short-circuit photocurrent density of 3.20 mA cm-2, open-circuit voltage of 0.77 V, and fill factor of 0.50, and the resulting overall conversion efficiency of 1.25% on average under air mass 1.5 conditions. Furthermore, the electron transport properties of the DSCs based on PEDOT (PEDOT/DSCs) were analyzed using light intensity modulation induced photocurrent and photovoltage decay (SLIM-PCV) measurements and electrochemical impedance spectroscopy (EIS) measurements, and then compared to those of the DSCs based on organic liquid electrolyte containing I-/I3- as redox couple (liquid iodide/iodine electrolyte-DSCs, iodide/DSCs for short). The effective filling of PEDOT in the mesopores of dyed TiO2 layers is an important key to achieve the respectable conversion efficiency of PEDOT/DSCs that is comparable with iodide/DSCs.     

High-surface-area microporous carbon as the efficient photocathode of dye-sensitized solar cells

This paper reports on the application of cornstalks-derived high-surface-area microporous carbon (MC) as the efficient photocathode of dye-sensitized solar cells (DSCs). The photocathode, which contains MC active material, Vulcan XC–72 carbon black conductive agent, and TiO₂ binder, was obtained by a doctor blade method. Electronic impedance spectroscopy (EIS) of the MC film uniformly coated on fluorine doped SnO₂ (FTO) glass displayed a low charge-transfer resistance of 1.32 Ω cm². Cyclic voltammetry (CV) analysis of the as-prepared MC film exhibited excellent catalytic activity for I₃^?/I^? redox reactions. The DSCs assembled with the MC film photocathode presented a short-circuit photocurrent density (J_sc) of 14.8 mA cm^?2, an open-circuit photovoltage (V_oc) of 798 mV, and a fill factor (FF) of 62.3%, corresponding to an overall conversion efficiency of 7.36% under AM 1.5 irradiation (100 mW cm^?2), which is comparable to that of DSCs with Pt photocathode obtained by conventional thermal decomposition.     

染料敏化纳米薄膜太阳电池中DMPII浓度的优化

利用超微铂电极和循环伏安法及电化学阻抗谱研究了在1,2-二甲基-3-丙基咪唑碘(DMPII)的3-甲氧基丙腈(MePN)溶液中I₃^－和I^－的氧化还原行为，并对比了由不同浓度的I2和DMPII组成的电解质溶液，其染料敏化纳米薄膜太阳电池(DSCs)的光伏性能. 发现以MePN为溶剂，含1.0 mol•dm^-3 DMPII、0.12 mol•dm^-3 I2、0.10 mol•dm^-3 LiI和0.50 mol•dm^-3 4-叔丁基吡啶的电解质溶液，其DSCs的短路光电流密度为16.67 mA•cm^-3、开路电压为0.69 V、填充因子为0.70、光电转换效率达8.08%.     

Modification of TiO<Subscript>2</Subscript> electrode films in dye-sensitized solar cells with PMMA

Nanocrystalline porous TiO₂ electrodes for dye-sensitized solar cells (DSC) are modified by adding polymethyl methacrylate (PMMA). The result shows that large holes are formed in the TiO₂ films, and the short circuit photocurrent density and photoelectric conversion efficiency of DSCs are obviously enhanced compared with those without adding the PMMA. The relationship between the photoelectric conversion efficiency and the amount of PMMA is presented. In particular, the highest conversion efficiency was obtained with TiO₂ electrode films of adding 7.5 wt% PMMA, increasing the conversion efficiency by 27.5%.     

Efficient iodine-free dye-sensitized solar cells employing truxene-based organic dyes

Two new truxene-based organic sensitizers (M15 and M16) featuring high extinction coefficients were synthesized for dye-sensitized solar cells employing cobalt electrolyte. The M16-sensitized device displays a 7.6% efficiency at an irradiation of AM1.5 full sunlight.     

Design of organic dyes and cobalt polypyridine redox mediators for high-efficiency dye-sensitized solar cells

Dye-sensitized solar cells (DSCs) with cobalt-based mediators with efficiencies surpassing the record for DSCs with iodide-free electrolytes were developed by selecting a suitable combination of a cobalt polypyridine complex and an organic sensitizer. The effect of the steric properties of two triphenylamine-based organic sensitizers and a series of cobalt polypyridine redox mediators on the overall device performance in DSCs as well as on transport and recombination processes in these devices was compared. The recombination and mass-transport limitations that, previously, have been found to limit the performance of these mediators were avoided by matching the properties of the dye and the cobalt redox mediator. Organic dyes with higher extinction coefficients than the standard ruthenium sensitizers were employed in DSCs in combination with outer-sphere redox mediators, enabling thinner TiO(2) films to be used. Recombination was reduced further by introducing insulating butoxyl chains on the dye rather than on the cobalt redox mediator, enabling redox couples with higher diffusion coefficients and more suitable redox potential to be used, simultaneously improving the photocurrent and photovoltage of the device. Optimization of DSCs sensitized with a triphenylamine-based organic dye in combination with tris(2,2'-bipyridyl)cobalt(II/III) yielded solar cells with overall conversion efficiencies of 6.7% and open-circuit potentials of more than 0.9 V under 1000 W m(-2) AM1.5 G illumination. Excellent performance was also found under low light intensity indoor conditions.     

1-丁基-3-甲基咪唑碘对染料敏化太阳电池的影响

采用季铵化反应合成了1-丁基-3-甲基咪唑碘([Bmim]I).以此制备了DSCs用液体电解质.通过对比不同浓度的1-丁基-3-甲基咪唑碘、碘化钾、碘,研究其对电池性能的影响.经过优化后,当c_IL=0.9 mol·L^-1、c_KI=0.5 mol·L^-1、c_I2=0.12 mol·L^-1时,所组装的离子液体DSCs在AM1.5,100 mW·cm^-2下,DSCs的短路电流密度为15.97 mA·cm^-2、开路电压为0.71 V、填充因子为0.55、光电转换效率可达6.34%.     

TCO-free dye solar cells based on Ti back contact electrode by facile printing method

The back contact dye solar cells (BCDSCs), in which the TCO(Transparent Conductive oxide) is omitted, have a potential for use of intact low-cost general substrates such as glass, metal foil and papers. Herein, we introduce a facile manufacturing method of a Ti back contact electrode (Ti BCE) for the BCDSCs. We found that the polylinkers such as poly(butyl titanate) have a strong binding property to make Ti particles connect one with another. A porous Ti film, which consists of Ti particles of ≤ 10? size connected by a small amount of polylinkers, has an excellent low sheet resistance of 10 Ω sq^-1 for an efficient electron collection for DSCs. This Ti BCE can be prepared by using a facile printing method under normal ambient conditions. Conjugating the new back contact electrode technology with the traditional monolithic structure using the carbon counter electrode, we fabricated TCO-less DSCs. These four-layer structurered DSCs consist of a dye-adsorbed nanocrystalline TiO₂ film on a glass substrate, a porous Ti back contact layer, a ZrO₂ spacer layer and a carbon counter electrode in a layered structure. Under AM 1.5 G and 100 mWcm^?2 simulated sunlight illumination, the four-layer structurered DSCs with N719 dyes and I^-/I₃^-redox electrolytes achieved PCEs up to 5.21 %.     

Theoretical rationalization for reduced charge recombination in bulky carbazole‐based sensitizers in solar cells

The search for greater efficiency in organic dye‐sensitized solar cells (DSCs) and in their perovskite cousins is greatly aided by a more complete understanding of the spectral and morphological properties of the photoactive layer. This investigation resolves a discrepancy in the observed photoconversion efficiency (PCE) of two closely related DSCs based on carbazole‐containing D–π–A organic sensitizers. Detailed theoretical characterization of the absorption spectra, dye adsorption on TiO₂, and electronic couplings for charge separation and recombination permit a systematic determination of the origin of the difference in PCE. Although the two dyes produce similar spectral features, ground‐ and excited‐state density functional theory (DFT) simulations reveal that the dye with the bulkier donor group adsorbs more strongly to TiO₂, experiences limited π–π aggregation, and is more resistant to loss of excitation energy via charge recombination on the dye. The effects of conformational flexibility on absorption spectra and on the electronic coupling between the bright exciton and charge‐transfer states are revealed to be substantial and are characterized through density‐functional tight‐binding (DFTB) molecular dynamics sampling. These simulations offer a mechanistic explanation for the superior open‐circuit voltage and short‐circuit current of the bulky‐donor dye sensitizer and provide theoretical justification of an important design feature for the pursuit of greater photocurrent efficiency in DSCs. © 2017 Wiley Periodicals, Inc.     

A new study on solid-state cyanine dye-sensitized solar cells

A new cyanine dye, 7-{1-[2-(4-morpholine-1,8-naphthalimide)ethyl]-1H-1,2,3-triazol-4-}-2-[3-(5-carboxyl-1,3-dihydro-3,3-dimethyl-1-butyl-indolin-2-methylene)-propenyl]-1,1-dimethyl-3-buty-1H-benzo[e]indolium iodide (BIDC), has been synthesized and identified with regard to its structure and photoelectrochemical properties used as a sensitizer on dye-sensitized solar cells. A novel solid-state electrolyte with polyaniline-loaded carbon black (PACB)-1-methyl-3-propylimidazolium iodide (MPII) composite was investigated on these dye-sensitized solar cells (DSCs). The short-circuit photocurrent density (J _sc), open-circuit photovoltage (V _oc) and fill factor (ff) under 200 W/m² white light from a xenon lamp are 0.44 mA/cm², 550 mV and 0.58, respectively, yielding an overall conversion efficiency (η) of 0.7%. The most merit of the solid-sate electrolyte was free of volatile and flammable fluid components and easy of encapsulation for DSCs.     

Molecular engineering of organic sensitizers for solar cell applications

Novel organic sensitizers comprising donor, electron-conducting, and anchoring groups were engineered at molecular level and synthesized. The functionalized unsymmetrical organic sensitizers 3-{5-[N,N-bis(9,9-dimethylfluorene-2-yl)phenyl]-thiophene-2-yl}-2-cyano-acrylic acid (JK-1) and 3-{5'-[N,N-bis(9,9-dimethylfluorene-2-yl)phenyl]-2,2'-bisthiophene-5-yl}-2-cyano-acrylic acid (JK-2), upon anchoring onto TiO2 film, exhibit unprecedented incident photon to current conversion efficiency of 91%. The photovoltaic data using an electrolyte having composition of 0.6 M M-methyl-N-butyl imidiazolium iodide, 0.04 M iodine, 0.025 M LiI, 0.05 M guanidinium thiocyanate, and 0.28 M tert-butylpyridine in a 15/85 (v/v) mixture of valeronitrile and acetonitrile revealed a short circuit photocurrent density of 14.0 +/- 0.2 mA/cm2, an open circuit voltage of 753 +/- 10 mV, and a fill factor of 0.76 +/- 0.02, corresponding to an overall conversion efficiency of 8.01% under standard AM 1.5 sunlight. DFT/TDDFT calculations have been performed on the two organic sensitizers to gain insight into their structural, electronic, and optical properties. Our results show that the cyanoacrylic acid groups are essentially coplanar with respect to the thiophene units, reflecting the strong conjugation across the thiophene-cyanoacrylic groups. Molecular orbitals analysis confirmed the experimental assignment of redox potentials, while TDDFT calculations allowed assignment of the visible absorption bands.     

Successful demonstration of an efficient I(-)/(SeCN)2 redox mediator for dye-sensitized solar cells

A new I(-)/(SeCN)(2) redox mediator has favorable properties for dye-sensitized solar cells (DSCs) such as less visible light absorption, higher ionic conductivity, and downward shift of redox potential than I(-)/I(3)(-). It was then applied for DSCs towards increasing energy conversion efficiency, giving a new potential for improving performance.     

Comparison of low crystallinity TiO2 film with nanocrystalline anatase film for dye-sensitized solar cells

Dye adsorption and microstructure of TiO₂ film are important properties when it is used as photoelectrode of dye-sensitized solar cells (DSCs). This study investigated the application of a low crystallinity TiO₂ film in DSCs. The low crystallinity TiO₂ film is composed of interconnected spherical particles with an average size of 20 nm and has homogeneous mesoporous inner structure. A DSC based on the anatase nanocrystalline mesoporous film prepared by P25 was used for comparison purpose. It is shown that although loaded with much less dye, the DSC based on the low crystallinity TiO₂ film generated I_sc (short circuit photocurrent) as much as the one based on the conventional anatase nanocrystalline film does and obtained higher V_oc (open circuit photovoltage) as well as ff (fill factor). The overall light-to-electricity efficiency (η) of the DSC based on the low crystallinity TiO₂ film reached 5.37%, while the η of the DSC based on anatase nanocrystalline film was 4.69% in this work condition. It is suggested that a low crystallinity TiO₂ mesoporous film with a proper microstructure is as efficient as the anatase nanocrystalline mesoporous film when used in DSCs.     

Application of monodisperse TiO2 nanoparticles with the size of 8–10 nm in dye-sensitized solar cells

In this paper, the commercial monodisperse TiO₂ nanoparticles with the size of 8–10 nm were successfully applied to the photoelectrode for dye-sensitized solar cells (DSCs) and the influence of the thickness of the TiO₂ thin films on the photovoltaic performance of the DSCs was investigated. The result revealed that the DSCs with the TiO₂ thin film thickness of 3.6, 8.0, 11.6 and 20.0 μm gave the photoelectric conversion efficiency of 3.67%, 5.92%, 6.71% and 7.03%, respectively, under the illumination of simulated AM 1.5 sunlight (100 mW cm⁻²).     

Triarylamine-combined nitronyl nitroxide and its hole-transporting property

N,N-Bis(4-methoxyphenyl)-4-(1-oxyl-3-oxide-4,4,5,5-tetramethylimidazolin-2-yl)phenylamine (1) was synthesized as a durable nitronyl nitroxide radical combined with a triarylamine moiety. Cyclic voltammetry and UV–Vis absorption spectra during the electrochemical oxidation of 1 revealed that the first redox was derived from the triarylamine moiety. The ionization potential of 1 was measured by photoelectron spectroscopy to be −5.4 eV, which was appropriate as a hole-transporting material. A single-layer hole-only device was fabricated with the radical molecule 1 dispersed in polycarbonate (ITO/1:polycarbonate/Al): The radical-layer exhibited a maximum current density of 0.2 mA/cm², which was applicable for organic electronic devices.     

Synthesis of sensitizers containing donor cascade of triarylamine and dimethylarylamine moieties for dye-sensitized solar cells

Four triarylamine derivatives (XS6-9) containing N,N-dimethylaryl amine units as secondary electron-donating groups are designed and synthesized. These dyes were applied into nanocrystalline TiO₂ dye-sensitized solar cells through standard operations. For a typical device the maximal monochromatic incident photon-to-current conversion efficiency (IPCE) can reach 93%, with a short-circuit photocurrent density (J_sc) 10.8 mA cm⁻², an open-circuit photovoltage (V_oc) 690 mV, and fill factor (FF) 0.61, which corresponds to an overall conversion efficiency of 4.54%.     

The effect of an atomically deposited layer of alumina on NiO in P-type dye-sensitized solar cells

We present a systematic investigation of the fundamental effects of an atomically deposited alumina (AlO(x)H(y)) onto the NiO films in p-type dye-sensitized solar cells (p-DSCs). With P1 as the sensitizing dye and 0.1 M I(2) and 1.0 M LiI in 3-methoxypropionitrile as the electrolyte, one atomic layer deposition (ALD) cycle of alumina was used to achieve a 74% increase in the overall conversion efficiency of a NiO-based DSC. The open circuit voltage of the cells increased from 0.11 to 0.15 V, and the short circuit current density increased from 0.83 to 0.95 mA/cm(2). Adsorption isotherm studies were performed to show that the amount of dye adsorbed on the NiO-alumina film is slightly lower than the amount adsorbed on the nontreated NiO film. The increased J(sc) was therefore assigned to the increased efficiency of carrier collection at the semiconductor-FTO interface. Our study of the photocurrent onset potentials of NiO and NiO-alumina films with the chopped light measurement technique showed no definitive difference in the onset potential values. However, the DSCs based on NiO-alumina showed a higher recombination resistance value from the electrochemical impedance studies and a higher diode ideality factor from the V(oc) versus ln(light intensity) plots as compared to the DSCs based on untreated NiO. It has thus been established that the increase in V(oc) upon alumina treatment arises due to a higher resistance for electron-hole recombination across NiO surface locally.     

Optoelectronic and nonlinear optical properties of tBu4PcTiO/polymer composite materials

The optoelectronic and nonlinear optical (NLO) properties of a soluble 2,(3)-(tetra-tert-butylphthalocyaninato)titanium(IV) oxide (tBu₄PcTiO) in solutions and in the solid states have been described. The nonlinear response demonstrated that tBu₄PcTiO exhibited strong RSA at 532 nm for both solution and solid-state based experiments. The decrease in the effective intensity dependent nonlinear absorption coefficient with increasing input intensities possibly results from high order triple state transitions of the excited-state population. No evidence of film fatigue or degradation was observed in the PMMA/tBu₄PcTiO film, after numerous scans at varying laser intensity. The doping of tBu₄PcTiO into poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene-vinylene] (MEH-PPV) results in the apparent increases of the open circuit voltage (Voc) and the short circuit photocurrent density under illumination with 40 mW cm⁻² white-light. The light absorption of tBu₄PcTiO incorporated into polymer represents the dominant contribution to the enhancement of the photocurrent. The dependence of the short circuit photocurrent in an ITO/tBu₄PcTiO-doped MEH-PPV/Al cell on the incident light intensity (I_in) between 30 and 200 mW cm⁻² was also investigated.     

Effect of sensitizer adsorption temperature on the performance of dye-sensitized solar cells

Employing a mesoscopic titania photoanode whose bilayer structure was judiciously selected to fit the optoelectronic characteristics of the Ru-based heteroleptic complex Na-cis-Ru(4,4'-(5-hexyltiophen-2-yl)-2,2'-bipyridine)(4-carboxylic-acid-4'-carboxylate-2,2'-bipyridine)(thiocyanate)(2), coded as C101, we investigated the effect of temperature for dye adsorption on the photovoltaic performance of dye-sensitized solar cells (DSCs). We found a significant efficiency enhancement upon lowering the temperature applied during the sensitizer uptake from solution. When the dye adsorption was performed at 4 °C, the photovoltaic performance parameters measured under standard reporting conditions (AM1.5 G sunlight at 1000 W/m(2) intensity and 25 °C), i.e., the open circuit voltage (V(oc)), the short circuit photocurrent density (J(sc)), the fill factor (FF), and consequently the power conversion efficiency (PCE), improved in comparison to cells stained at 20 and 60 °C. Results from electrochemical impedance spectroscopy (EIS) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) show that the self-assembled layer of C101 formed at lower temperature impairs the back-electron transfer from the TiO(2) conduction band to the triiodide ions in the electrolyte more strongly than the film produced at 60 °C. Profiting from the favorable influence that the low-temperature dye uptake exerts on photovoltaic performance, we have realized DSCs showing a power conversion efficiency of 11.5%.