石墨烯/橡胶纳米复合材料研究进展

石墨烯结合了碳纳米管导电和黏土片层的结构特征,为发展高性能、多功能聚合物纳米复合材料提供了新的方向.石墨烯/橡胶纳米复合材料近年来引起广泛关注.众多研究结果表明石墨烯是橡胶的理想填料之一,为高性能橡胶改性提供了新途径.本文介绍了石墨烯/橡胶纳米复合材料的3种主要制备方法,即乳液共混法、溶液共混法和机械混炼法,以及材料的物理机械性能、电学性能、气体阻隔性能和热学性能,并分析了该类材料的发展前景和存在问题.     

石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂制备及其乙烯聚合性能

石墨烯自2004年发现以来,由于其独一无二的优异性迅速成为科学家们的研究热点.由于石墨烯具有极其优异的电学、力学和热学等性能,因此被广泛应用于高性能聚合物基复合材料的制备.众所周知,纳米填料在聚合物中的分散状态以及与基体间的界面作用是构筑高性能聚合物纳米复合材料的关键因素.由于石墨烯极易团聚,难以通过传统的熔融共混法制备均匀分散的石墨烯增强-聚烯烃纳米复合材料.另一方面,聚烯烃通常需要在较高温度下才能溶于部分有毒溶剂(如:三氯苯和二甲苯等),因此溶液共混法也不适用于聚烯烃-石墨烯纳米复合材料的制备.有鉴于此,本文开发了一种共沉积法制备石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂的路线.通过原位聚合直接制备出石墨烯均匀分散的聚烯烃/石墨烯纳米复合材料.考察了石墨烯的加入量对催化剂形态及其催化乙烯聚合行为的影响.当石墨烯加入量较低时,多个石墨烯片被包裹于较大的催化剂粒子中.随着石墨烯加入量的增加,催化剂趋向于在石墨烯表面聚集.继续增加石墨烯量将导致石墨烯包裹催化剂粒子,降低过渡金属钛的负载效率.通过三乙基铝活化后,所制备的催化剂具有非常高的乙烯催化活性,所生成的聚乙烯/石墨烯纳米复合材料复制了催化剂的片状结构.同时,通过对所制备的聚乙烯/石墨烯纳米复合材料进行电子显微镜和X射线衍射分析可知,石墨烯均匀分散于聚乙烯基体中,并且没有任何团聚现象发生.该复合材料的热重分析表明,仅加入非常少量的石墨烯就可以使其具有比纯聚乙烯更高的热稳定性,当石墨烯加入量为0.66 wt%时,其5 wt%热分解温度较纯聚乙烯升高了54°C.同时,所制备聚乙烯/石墨烯纳米复合材料具有更优异的机械性能.因此,本研究提供了一个简单高效的高性能聚烯烃/石墨烯纳米复合材料的制备方法.     

石墨烯改性硅橡胶研究进展

依据硅橡胶优异的热稳定性,有望应用于航天航空领域,但由于其自身的力学性能较差限制了它的应用。本文综述了力学性能、电性能和热稳定性优异的石墨烯改性硅橡胶的应用研究。介绍了石墨烯改性硅橡胶复合材料的四种制备方法——乳液共混法、溶液共混法、熔融共混法和机械共混法,重点综述了机械共混法制备石墨烯改性硅橡胶复合材料,比较并分析了石墨烯改性硅橡胶复合材料性能影响因素及其研究现状,发现国内外研究石墨烯改性硅橡胶主要用于硅橡胶的电性能研究,最后,对石墨烯改性硅橡胶复合材料的应用前景进行了展望。     

石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂制备及其乙烯聚合性能（英文）

石墨烯自2004年发现以来,由于其独一无二的优异性迅速成为科学家们的研究热点.由于石墨烯具有极其优异的电学、力学和热学等性能,因此被广泛应用于高性能聚合物基复合材料的制备.众所周知,纳米填料在聚合物中的分散状态以及与基体间的界面作用是构筑高性能聚合物纳米复合材料的关键因素.由于石墨烯极易团聚,难以通过传统的熔融共混法制备均匀分散的石墨烯增强-聚烯烃纳米复合材料.另一方面,聚烯烃通常需要在较高温度下才能溶于部分有毒溶剂(如:三氯苯和二甲苯等),因此溶液共混法也不适用于聚烯烃-石墨烯纳米复合材料的制备.有鉴于此,本文开发了一种共沉积法制备石墨烯/二氯化镁负载钛系齐格勒-纳塔催化剂的路线.通过原位聚合直接制备出石墨烯均匀分散的聚烯烃/石墨烯纳米复合材料.考察了石墨烯的加入量对催化剂形态及其催化乙烯聚合行为的影响.当石墨烯加入量较低时,多个石墨烯片被包裹于较大的催化剂粒子中.随着石墨烯加入量的增加,催化剂趋向于在石墨烯表面聚集.继续增加石墨烯量将导致石墨烯包裹催化剂粒子,降低过渡金属钛的负载效率.通过三乙基铝活化后,所制备的催化剂具有非常高的乙烯催化活性,所生成的聚乙烯/石墨烯纳米复合材料复制了催化剂的片状结构.同时,通过对所制备的聚乙烯/石墨烯纳米复合材料进行电子显微镜和X射线衍射分析可知,石墨烯均匀分散于聚乙烯基体中,并且没有任何团聚现象发生.该复合材料的热重分析表明,仅加入非常少量的石墨烯就可以使其具有比纯聚乙烯更高的热稳定性,当石墨烯加入量为0.66 wt%时,其5 wt%热分解温度较纯聚乙烯升高了54℃.同时,所制备聚乙烯/石墨烯纳米复合材料具有更优异的机械性能.因此,本研究提供了一个简单高效的高性能聚烯烃/石墨烯纳米复合材料的制备方法.     

石墨烯及其聚合物纳米复合材料

石墨烯是一种新型的二维纳米碳材料,具有优异的机械性能、电性能和热性能等,是聚合物纳米复合材料的理想填料。近年来,石墨烯/聚合物纳米复合材料成为聚合物基纳米复合材料的研究热点。本文对石墨烯及其聚合物纳米复合材料的研究进展进行了综述。首先概述了石墨烯的不同制备方法及石墨烯的共价与非共价改性途径。然后重点总结了石墨烯/聚合物纳米复合材料的常用制备方法及其机械性能、导电性、导热性、耐热性及阻隔性能。最后,对该领域所存在的问题进行了总结,并展望了其发展趋势。     

高性能石墨烯/聚合物纳米复合材料的研究进展——界面作用力的设计及其影响

石墨烯是一种二维材料,具有极其优异的电学、力学、热学等性能,制备方法简单且价格低廉,可以在高性能聚合物基复合材料中展现无穷魅力.石墨烯在聚合物中的分散状态,以及与基体间的界面作用是构筑高性能石墨烯/聚合物纳米复合材料的关键因素.本文综述了石墨烯/聚合物纳米复合材料的界面作用力,包括氢键、π-π堆栈、共价、配位作用和成核—结晶作用,并总结和评述了这些界面作用力的优缺点和适用范围.最后展望了多种协同作用在构筑强界面作用力的石墨烯/聚合物基纳米复合材料中的应用前景.     

聚乙二醇/功能化石墨烯层状纳米复合材料热稳定性的提高

通过溶液共混技术成功制备了一系列聚乙二醇功能化石墨烯(GO-PEG)填充的聚乙二醇4000(PEG4000)基纳米复合材料.利用红外(FT-IR)、X衍射(XRD)、扫描电镜(SEM)、热重(TG)及玻璃化转变温度(Tg)等表征手段详细研究了复合材料的结构和热性能.结果表明:GO-PEG可均匀分散在聚合物基体中,纳米复合材料呈层状结构;组分间的较强界面相互作用协同增强了纳米复合材料的热稳定性能.最终提出了层状纳米复合材料的形成过程及机理.     

电化学法制备石墨烯及其复合材料

石墨烯是一种具有优异物理和化学性质的新型二维碳纳米材料,大规模低成本制备高品质石墨烯的方法是其能够得到广泛实际应用的重要前提. 电化学方法可以快捷、绿色无污染、批量制备高质量的石墨烯及其复合材料. 本综述在对石墨烯各种制备方法进行简要比较之后,对近年来石墨烯、石墨烯/无机纳米复合材料、石墨烯/聚合物复合材料以及类石墨烯材料的电化学法制备进展进行介绍并作了展望.     

石墨烯/聚苯胺复合材料的制备及应用

石墨烯/聚苯胺复合材料由于其优异的电学、热学、电化学性能和机械性能等特点,吸引了研究者们的广泛关注。本文对近几年来石墨烯/聚苯胺复合材料的发展状况进行了简单介绍,首先总结了原位聚合法、界面聚合法、自组装法、溶液共混法等不同制备方法对石墨烯/聚苯胺复合材料结构和性能的影响。由于石墨烯/聚苯胺复合材料结合了石墨烯和聚苯胺两者的优点,展现出更加优异的性能,因此本文还对其在超级电容器、传感器、燃料电池、太阳能电池等方面的应用进行了详细介绍。     

石墨烯/高分子复合薄膜的制备及应用

石墨烯是一种单原子厚度的二维碳纳米材料,具有优异的光、电、热和力学性能,以及巨大的比表面积.石墨烯与高分子之间能够通过共价或非共价作用(氢键、π-π作用、静电作用等)进行复合.这些相互作用既增加了石墨烯在高分子中的溶解性或分散性,也可以提高复合材料的性能或拓展其功能.目前常用的制备石墨烯高分子复合材料的方法有溶液混合、熔融共混和原位聚合等.该类复合材料可以通过蒸发溶剂、溶液涂覆、真空抽滤、层层自组装等途径加工成相应的复合膜.石墨烯高分子复合薄膜在制备高强度结构材料、超级电容器、光伏器件、锂离子电池负极材料以及传感器等方面具有重要的应用价值.本文综述了近年来石墨烯高分子复合薄膜的制备和应用方面的研究进展,并对该领域进行了展望.     

Preparation of a poly(methyl methacrylate)-reduced graphene oxide composite with enhanced properties by a solution blending method

Poly(methyl methacrylate) (PMMA)/graphene nanocomposites were prepared by a simple solution blending method. The glass transition temperature of the produced PMMA/graphene composite was increased by 37 °C with 1.0 wt.% RGO content, which is approximately 40% of improvement compared to that of pure PMMA. The thermal expansion coefficient (TEC) decreased by 68% with as low as 0.1 wt.% RGO loading. The electrical conductivity of the nanocomposites reached up to 0.037 S/m even with only 2.0 wt.% RGO, which increased by more than twelve orders of magnitude. The resulting nanocomposites showed that a stable colloidal suspension of graphene dispersion in organic solvent before blending with PMMA is necessary to fabricate the nanocomposites with enhanced properties.     

Thermal Degradation Kinetics and Modeling Study of Ultra High Molecular Weight Polyethylene (UHMWP)/Graphene Nanocomposite

The incorporation of nanofillers such as graphene into polymers has shown significant improvements in mechanical characteristics, thermal stability, and conductivity of resulting polymeric nanocomposites. To this aim, the influence of incorporation of graphene nanosheets into ultra-high molecular weight polyethylene (UHMWPE) on the thermal behavior and degradation kinetics of UHMWPE/graphene nanocomposites was investigated. Scanning electron microscopy (SEM) analysis revealed that graphene nanosheets were uniformly spread throughout the UHMWPE’s molecular chains. X-Ray Diffraction (XRD) data posited that the morphology of dispersed graphene sheets in UHMWPE was exfoliated. Non-isothermal differential scanning calorimetry (DSC) studies identified a more pronounced increase in melting temperatures and latent heat of fusions in nanocomposites compared to UHMWPE at lower concentrations of graphene. Thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) revealed that UHMWPE’s thermal stability has been improved via incorporating graphene nanosheets. Further, degradation kinetics of neat polymer and nanocomposites have been modeled using equations such as Friedman, Ozawa–Flynn–Wall (OFW), Kissinger, and Augis and Bennett’s. The "Model-Fitting Method” showed that the auto-catalytic nth-order mechanism provided a highly consistent and appropriate fit to describe the degradation mechanism of UHMWPE and its graphene nanocomposites. In addition, the calculated activation energy (E_a) of thermal degradation was enhanced by an increase in graphene concentration up to 2.1 wt.%, followed by a decrease in higher graphene content.     

Morphology and physical properties of poly(ethylene oxide) loaded graphene nanocomposites prepared by two different techniques

Organic–inorganic hybrids are artificially created structures presenting novel properties not exhibited by either of the component materials alone. In this contribution one addresses processing, morphology and properties of polymer nanocomposites reinforced graphene. First, synthesis routes to graphite oxide (GO) and foliated graphene sheets (FGS) are illustrated. Physical characterization of these graphene sheets were conducted using atomic force microscopy and X-ray diffraction techniques. Processing, structure and properties of graphene/poly(ethylene oxide) (PEO) nanocomposites are discussed. FGS was dispersed into PEO via two different composite manufacturing techniques: melt compounding and solvent mixing. Morphology of dispersed graphene and properties from different blending routes are compared. TEM showed that graphene distributed parallel to the composite surface using solvent method, while distributed randomly in melt blended method. Optical measurements indicated that the transparency of PEO/graphene prepared by solvent method is higher than that of melt blended method in the visible region. Electrical conductivity measurements are employed to evaluate threshold concentration for rigidity and connectivity percolation. The percolation concentration of the composites prepared by solvent method is less than those of melt blended method. The mechanical performance of the composites prepared by solvent method is higher than melt blended. Halpin–Tsai model has been used to confirm the distribution of the graphene into PEO by the two different processing techniques.     

The role of graphene interactions and geometry on thermal and electrical properties of epoxy nanocomposites: A theoretical to experimental approach

The influence of dispersion procedure and nanofiller geometry on thermal and electrical properties of graphene nanoplatelet (GNP) based composites has been investigated. A theoretical model, based on the contacts between adjacent nanoparticles, has been proposed aiming to connect thermal and electrical properties. It has been observed that GNP overlapping (type I) induces a decrease on thermal conductivity. Its effect on electrical conductivity is more complex and depends on the areas of overlap and in-plane contacts (type II). A higher type I area in comparison to type II implies an increase of electrical conductivity with overlapping whereas the opposite effect is found when type II area is higher than type I. The predicted results of the theoretical model fitted experimental measurements at different GNP contents and three roll milling processing conditions, giving a better overview of the influence of GNP geometry and interactions on electrical and thermal properties of nanocomposites.     

Graphene‐polymer nanocomposites for biomedical applications

Despite the significant efforts in the synthesis of new polymers, the mechanical properties of polymer matrices can be considered modest in most cases, which limits their application in demanding areas. The isolation of graphene and evaluation of its outstanding properties, such as high thermal conductivity, superior mechanical properties, and high electronic transport, have attracted academic and industrial interest, and opened good perspectives for the integration of graphene as a filler in polymer matrices to form advanced multifunctional composites. Graphene‐based nanomaterials have prompted the development of flexible nanocomposites for emerging applications that require superior mechanical, thermal, electrical, optical, and chemical performance. These multifunctional nanocomposites may be tailored to synergistically combine the characteristics of both components if proper structural and interfacial organization is achieved. The investigations carried out in this aim have combined graphene with different polymers, leading to a variety of graphene‐based nanocomposites. The extensive research on graphene and its functionalization, as well as polymer graphene composites, aiming at applications in the biomedical field, are reviewed in this paper. An overview of the polymer matrices adequate for the biomedical area and the production techniques of graphene composites is presented. Finally, the applications of such nanocomposites in the biomedical field, particularly in drug delivery, wound healing, and biosensing, are discussed.     

Functionalized graphene/thermoplastic polyester elastomer nanocomposites by reactive extrusion‐based masterbatch: preparation and properties reinforcement

A reactive extrusion process was developed to fabricate polymer/graphene nanocomposites with good dispersion of graphene sheets in the polymer matrix. The functionalized graphene nanosheet (f‐GNS) activated by diphenylmethane diisocyanate was incorporated in thermoplastic polyester elastomer (TPEE) by reactive extrusion process to produce the TPEE/f‐GNS masterbatch. And then, the TPEE/f‐GNS nanocomposites in different ratios were prepared by masterbatch‐based melt blending. The structure and morphology of functionalized graphene were characterized by Fourier transform infrared, X‐ray photoelectron spectroscopy, X‐ray diffraction and transmission electron microscopy (TEM). The incorporation of f‐GNS significantly improved the mechanical, thermal and crystallization properties of TPEE. With the incorporation of only 0.1 wt% f‐GNS, the tensile strength and elongation at break of nanocomposites were increased by 47.6% and 30.8%, respectively, compared with those of pristine TPEE. Moreover, the degradation temperature for 10 wt% mass loss, storage modulus at ?70°C and crystallization peak temperature (T_cp) of TPEE nanocomposites were consistently improved by 17°C, 7.5% and 36°C. The remarkable reinforcements in mechanical and thermal properties were attributed to the homogeneous dispersion and strong interfacial adhesion of f‐GNS in the TPEE matrix. The functionalization of graphene was beneficial to the improvement of mechanical properties because of the relatively well dispersion of graphene sheets in TPEE matrix, as suggested in the TEM images. This simple and effective approach consisting of chemical functionalization of graphene, reactive extrusion and masterbatch‐based melt blending process is believed to offer possibilities for broadening the graphene applications in the field of polymer processing. Copyright © 2014 John Wiley & Sons, Ltd.     

Studies on the mechanism for the sudden mechanical property drops of graphene/polymer nanocomposites

Graphene/polymer nanocomposites (GPNCs) have gained intense research interest in recent years. Graphene can improve the properties of the nanocomposites at low loadings, but usually causes sudden drops in the mechanical properties of the nanocomposites at similarly low loadings, risking the performance, reproducibility, and batch stability of the nanocomposites. This problem has been troubling the GPNCs field for years, but it is difficult to solve mainly because the mechanism of the sudden mechanical property drops has not been well documented yet. Here, we present a systematic study on this problem. At first, a statistical study was made to provide an overview of the sudden mechanical property drops. It was found that the sudden mechanical property drops were almost independent of the surface modification of graphene, and the in situ polymerization method sometimes leads to lower critical concentration than the solvent blending and melt blending methods. Then, we demonstrated a cutting‐off mechanism which unveiled that the formation of a continuous or semicontinuous network of graphene throughout the polymeric matrix was the main cause of the sudden mechanical property drops, and the low critical concentration of the sudden mechanical property drops was mainly due to the large aspect ratio of graphene. Finally, future research prospects were proposed. Overall, our work has provided new understandings and insights to the mechanical properties of GPNCs.     

Click coupled graphene for fabrication of high‐performance polymer nanocomposites

An effective technique of using click coupled graphene to obtain high‐performance polymer nanocomposites is presented. Poly(ε‐caprolactone) (PCL)‐click coupled graphene sheet (GS) reinforcing fillers are synthesized by the covalent functionalization of graphene oxide with PCL, and subsequently the PCL‐GS as a reinforcing filler was incorporated into a shape memory polyurethane matrix by solution casting. The PCL‐click coupled GS has shown excellent interaction with the polyurethane matrix, and as a consequence, the mechanical properties, thermal stability, thermal conductivity, and thermo‐responsive shape memory properties of the resulting nanocomposite films could be enhanced remarkably. In particular, for polyurethane nanocomposites incorporated with 2% PCL‐GS, the breaking stress, Young's modulus, elongation‐at‐break, and thermal stability have been improved by 109%, 158%, 28%, and 71 °C, respectively. This click coupling protocol offers the possibility to fully combine the extraordinary performance of GSs with the properties of polyurethane. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Poly(butylene succinate) and graphene nanoplatelet–based sustainable functional nanocomposite materials: structure-properties relationship

Sustainable functional polymer nanocomposites from renewable resources are extremely promising materials that can provide the next-generation of lightweight, multifunctional materials for several applications including energy storage, automotive, construction, defense, aerospace, consumer products, biomedical and functional coatings to name few. There is limited information on the use of sustainable polymers and graphene nanoplatelets (GNs), as well as the combinations of these two can provide reduced water permeability or enhanced electrical conductivity and improved thermal properties, and so on. Building upon this hypothesis, biobased poly(butylene succinate)/few-layer GN nanocomposites were prepared via a solventless melt-blending technique. Different characterization techniques such as differential scanning calorimetery, thermogravimetric analysis, dynamic mechanical analysis, dielectric spectroscopy, X-ray diffraction (XRD) and hot stage optical microscopy were used to study the thermal and structural characteristics. The melt blending was characterized by torque and temperature curves which showed that torque was reduced by up to 15 Nm, and melt temperature was improved by up to 5 °C. The improved crystallization of the composites in low concentrations of GN was observed. Graphene has been found to increase the crystallization temperature up to 10 °C and yielded pronounced spherulite structure, whereas peak shift was observed in XRD. High filler loading from 0.5 to 6.0 wt% was used to obtain more insights for few-layer graphene applications for thermoplastic polymer processing applications.