Bestimmung von Calcium, Magnesium, Strontium, Kalium, Natrium, Lithium, Eisen, Mangan, Chrom, Nickel, Kupfer, Cobalt, Zink und Cadmium

Zusammenfassung Für 14 Elemente wird eine universelle Methode beschrieben. Durch Zusatz von Lanthan und Cäsium werden die physikalischen, chemischen und Ionisations-Störungen in der Flammen-AAS ausgeschaltet. Es wird gezeigt, daß diese Methode für sehr unterschiedliche Stoffe mit Erfolg angewendet werden kann, und gleichzeitig die Genauigkeit des Routinemeßverfahrens nicht beeinträchtigt wird. Nur in Ausnahmefällen muß die Additionsmethode benutzt werden.

---

Determination of calcium, magnesium, strontium, potassium, sodium, lithium, iron, manganese, chromium, nickel, copper, cobalt, zinc and cadmium by flame AASA universal method for the analysis of waters, coals, ashes, ores, rocks, building materials, metals and similar samples

Summary A universal method is described for 14 elements. By addition of lanthanum and caesium the physical, chemical and ionization interferences in the flame AAS are eliminated. It is demonstrated that this method can be applied successfully for very different materials and simultaneously the precision of the standard measuring method is not affected. Only in exceptional cases the addition method has to be applied.

---

---

Herrn Prof. Dr. W. Schuhknecht, dem langjährigen Leiter des Zentrallabors der Saarbergwerke AG (1948–1972) zum Gedenken

---

Für die sorgfältige Durchführung von Säure- und Schmelzaufschlüssen sowie seine nützlichen Hinweise bei der Korrektur des Manuskriptes möchte ich Herrn Lothar Kiefer meinen besonderen Dank aussprechen.     

SYNTHESIS AND CRYSTAL STRUCTURE OF 5, 10, 15, 20, 22, 24-HEXAHYDRO-5, 5, 10, 10, 15, 15, 20, 20-OCTAMETHYL-PORPHINE

<正> The title com pound (HHOMP) has been synthesized with the pho-toinduced condensation of acetone and pyrrole in the presence of iodoaromatic hydrocarbons, and its molecular and crystal structures have been determined by X-ray analysis. C28H36N4, Mr = 428. 63, triclinic; space group P1; a =10. 165(3), b = 10. 185(2), c=13. 012(3)(?); α=85. 41(2), β=67. 84(2), γ= 89. 75(2)°; V = 1243 (?)3; Z = 2; D = 1. 145g. cm-3; μ= 0. 635cm-1; F (000) = 464. Although the HHOMP molecule twists, it is found that the four nitrogen atoms are still in a plane.     

电感耦合等离子体质谱法(ICP-MS)测定稀土矿中钇、镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钪量

通过用四酸与微波消解法溶解样品对比,建立了用硝酸、盐酸、氢氟酸、高氯酸分解样品,采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿中16种元素含量。方法采用_¹⁰³Rh作为内标消除干扰,确定了最优测定条件,16种稀土元素检出限为0.0029-0.0099ng/mL,测定范围为0.0005-0.020%。精密度试验、加标回收试验及标准物质检测,结果验证了方法的可行性及准确性。该方法简单易操作,结果可靠,能满足实验分析要求。     

Syntheses, structure, some band gaps, and electronic structures of CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Y)

Eleven new quaternary rare-earth tellurides, CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, and Y), were prepared from solid-state reactions at 1123 K. These isostructural materials crystallize in the layered KZrCuS3 structure type in the orthorhombic space group Cmcm. The structure is composed of LnTe6 octahedra and ZnTe4 tetrahedra that share edges to form [LnZnTe3] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing CsTe8 bicapped trigonal prisms. There are no Te-Te bonds in the structure of these CsLnZnTe3 compounds so the formal oxidation states of Cs/Ln/Zn/Te are 1+/3+/2+/2-. Optical band gaps of 2.13 eV for CsGdZnTe3 and 2.12 eV for CsTbZnTe3 were deduced from single-crystal optical absorption measurements. A first-principles calculation of the density of states and the frequency-dependent optical properties was performed on CsGdZnTe3. The calculated band gap of 2.1 eV is in good agreement with the experimental value. A quadratic fit for the lanthanide contraction of the Ln-Te distance is superior to a linear one if the closed-shell atom is included.     

Conjugate addition reactions of alpha-aminoalkylcuprates with alpha, beta-alkenyl-, alpha,beta-alkynyl-, alpha,beta-beta,gamma-allenyl-, and alpha,beta-gamma,delta-dienyl carboxylic acid derivatives, nitriles, and sulfoxides

alpha-Aminoalkylcuprates prepared from alpha-lithio carbamates and CuCN.2LiCl participate in 1,4-addition reactions with alpha, beta-unsaturated esters, thiol esters, imides, and nitriles in poor to excellent yields depending upon the electron-withdrawing substituent and the substitution pattern of the unsaturated substrate. These reagents also undergo conjugate addition reactions with alpha,beta-alkynyl esters, sulfoxides, and nitriles and with alpha,beta-beta,gamma-unsaturated allenyl esters. Excellent stereocontrol is achieved in the conjugate additions of alpha-aminoalkylcuprates to the allenyl esters, while poor stereoselectivity results in the conjugate additions to the alkynyl derivatives. Deprotection and cyclization of the alkynyl adducts affords pyrrolin-2-ones, while similar treatment of the allenyl adducts affords 4-alkylidine- pyrrolidin-2-ones and pyrrolizidinones.     

Optimization of parameters for semiempirical methods. III Extension of PM3 to Be,Mg, Zn,Ga, Ge,As, Se,Cd, In,Sn, Sb,Te, Hg,Tl, Pb,and Bi

Using a recently developed procedure for optimizing parameters for semiempirical methods,¹ PM3 has been extended to a total of 28 elements. Average ΔH_f errors for the newly parameterized elements are Be: 8.6, Mg: 8.4, Zn: 5.8, Ga: 14.9, Ge: 11.4, As: 8.5, Se: 11.1, Cd: 2.6, In: 11.3, Sn: 9.0, Sb: 13.7, Te: 11.3, Hg: 6.8, Tl: 6.5, Pb: 7.4, and Bi: 10.9 kcal/mol. For some elements the paucity of data has resulted in a method, which, while highly accurate, is likely to be only poorly predictive.     

Theoretical Study on the Structure and Stability of Si5X （X = Li, Be, B, C, N, O, F, Na, Mg, Al, Si, P, S, Cl） Clusters

1 INTRODUCTION In the later 60s of last century, silicon substituted for germanium to present as mainstream in semicon- ductor. The semi-conductive devices made by silicon have many advantages, for example, refractory pro- perty, high radioresistance, simple and stable process- ing technic, high machinability and low cost. So it was widely used to manufacture large power appara- tuses, for instance, digit and linear integrated circuit, large scale integrated circuit (LSI), etc. Thus, th…     

RM1: a reparameterization of AM1 for H, C, N, O, P, S, F, Cl, Br, and I

Twenty years ago, the landmark AM1 was introduced, and has since had an increasingly wide following among chemists due to its consistently good results and time-tested reliability--being presently available in countless computational quantum chemistry programs. However, semiempirical molecular orbital models still are of limited accuracy and need to be improved if the full potential of new linear scaling techniques, such as MOZYME and LocalSCF, is to be realized. Accordingly, in this article we present RM1 (Recife Model 1): a reparameterization of AM1. As before, the properties used in the parameterization procedure were: heats of formation, dipole moments, ionization potentials and geometric variables (bond lengths and angles). Considering that the vast majority of molecules of importance to life can be assembled by using only six elements: C, H, N, O, P, and S, and that by adding the halogens we can now build most molecules of importance to pharmaceutical research, our training set consisted of 1736 molecules, representative of organic and biochemistry, containing C, H, N, O, P, S, F, Cl, Br, and I atoms. Unlike AM1, and similar to PM3, all RM1 parameters have been optimized. For enthalpies of formation, dipole moments, ionization potentials, and interatomic distances, the average errors in RM1, for the 1736 molecules, are less than those for AM1, PM3, and PM5. Indeed, the average errors in kcal x mol(-1) of the enthalpies of formation for AM1, PM3, and PM5 are 11.15, 7.98, and 6.03, whereas for RM1 this value is 5.77. The errors, in Debye, of the dipole moments for AM1, PM3, PM5, and RM1 are, respectively, 0.37, 0.38, 0.50, and 0.34. Likewise, the respective errors for the ionization potentials, in eV, are 0.60, 0.55, 0.48, and 0.45, and the respective errors, in angstroms, for the interatomic distances are 0.036, 0.029, 0.037, and 0.027. The RM1 average error in bond angles of 6.82 degrees is only slightly higher than the AM1 figure of 5.88 degrees, and both are much smaller than the PM3 and PM5 figures of 6.98 degrees and 9.83 degrees, respectively. Moreover, a known error in PM3 nitrogen charges is corrected in RM1. Therefore, RM1 represents an improvement over AM1 and its similar successor PM3, and is probably very competitive with PM5, which is a somewhat different model, and not fully disclosed. RM1 possesses the same analytical construct and the same number of parameters for each atom as AM1, and, therefore, can be easily implemented in any software that already has AM1, not requiring any change in any line of code, with the sole exception of the values of the parameters themselves.     

Instrumental neutron activation determination of Pt,Ru, Ir,Sc, Cr,Fe, Co,La, Ce,Nd, Sm,Yb, Lu,Hf and Ta employing CIRUS reactor as a thermal neutron source

An accurate and simple method has been developed for the determination of Pt, Ru, Ir and other elements employing instrumental neutron activation analysis (INAA). Nondestructive analysis has been carried out for the determination of these elements in different rock samples such as Dolerite, Dyke Dolerite, Country Basalt, Hyaloclastite, Trachyte, Ijolite, Spillite, Diorite and Lamprophyre from various locations like Daman, Tapti, Murud, Talasari, Ranala and Bassein in Maharashtra state. High flux provided by the CIRUS reactor (1×10¹³ n cm^?2s^?1) has been used for thermal neutron bombardment followed by radioassaying of the (n,γ) products on a HPGe detector coupled to a PC-based MCA unit.     

Bestimmung von As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V und Zn in Kohlen, Additiven, Flugaschen und Impaktorfilterst?uben aus Kohlekraftwerken

Summary The analysis of coal, additives and combustion residues of coal-fired power plants is described. The selection of the best decomposition method has a special meaning for the type of sample (coal, additive etc.) as also for the elements to be determined in the different samples. There is no universal method which fits all the different samples and no universal determination system for this problem. Problems of the determination of chromium and arsenic are described and discussed due to the matrix and the decomposition technique. The determination with another independent method and the measurement of certified reference material is a good approach to the true value of the elements to be determined in the samples.     

Simultanbestimmung von Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co und As in St?hlen mit ICP-AES

Summary A universal method for quantitative analysis of twelve elements in low-alloy steels is described. The samples are digested in a mixture of sulfuric-/nitric acid/ammonium peroxodisulfate. Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co, As are determined in solution by ICP-AES. The procedure was tested with NBS and BCS reference samples. The analytical results are in good agreement with the certified values. With slight modifications, the method is applicable to the analysis of high-alloy steel samples.     

Acidity trends in alpha,beta-unsaturated sulfur, selenium, and tellurium derivatives: comparison with C-, Si-, Ge-, Sn-, N-, P-, As-, and Sb-containing analogues

The gas-phase acidity of CH3-CH2XH (X=S, Se, Te), CH2=CHXH (X=S, Se, Te) and PhXH (X=S, Se) compounds was measured by means of Fourier transform ion cyclotron resonance mass spectrometry. To analyze the role that unsaturation plays on the intrinsic acidity of these systems, a parallel theoretical study, in the framework of the G2 and the G2(MP2) theories, was carried out for all ethyl, ethenyl (vinyl), ethynyl, and phenyl O-, S-, Se-, and Te-containing derivatives. Unsaturated compounds are stronger acids than their saturated analogues, because of the strong pi-electron donor ability of the heteroatoms that contributes to a large stabilization of the unsaturated anions. Ethynyl derivatives are stronger acids than vinyl compounds, while phenyl derivatives have an intrinsic acidity intermediate between that of the corresponding vinyl and ethynyl analogues. The CH2=CHXH vinyl compounds (enol-like) behave systematically as slightly stronger acids than their CH3-C(H)X (keto-like) tautomers. Vinyl derivatives are stronger acids than ethyl compounds, because the anion stabilization attributable to unsaturation is greater than that undergone in the neutral compounds. Conversely, the enhanced acidity of the ethynyl derivatives with respect to the vinyl compounds is due to two concomitant effects, the stabilization of the anion and the destabilization of the neutral compound. The acidities of ethyl, vinyl, and ethynyl derivatives containing heteroatoms of Groups 14, 15, and 16 of the periodic table are closely related, and reflect the differences in electronegativity of the CH3CH2-, CH2=CH-, and CH[triple chemical bond]C- groups.     

Instrumental neutron activation determination of Pt, Ru, Ir, Sc, Cr, Fe, Co, La, Ce, Nd, Sm, Yb, Lu, Hf and Ta employing CIRUS reactor as a thermal neutron source

An accurate and simple method has been developed for the determination of Pt, Ru, Ir and other elements employing instrumental neutron activation analysis (INAA). Nondestructive analysis has been carried out for the determination of these elements in different rock samples such as Dolerite, Dyke Dolerite, Country Basalt, Hyaloclastite, Trachyte, Ijolite, Spillite, Diorite and Lamprophyre from various locations like Daman, Tapti, Murud, Talasari, Ranala and Bassein in Maharashtra state. High flux provided by the CIRUS reactor (1×10¹³ n cm^–2s^–1) has been used for thermal neutron bombardment followed by radioassaying of the (n,) products on a HPGe detector coupled to a PC-based MCA unit.     

Certification of the mass fractions of Ca,Cu, Cl,I, Fe,K, Mg,P, Pb,N, Na and Zn in skim milk powder

Analyses of milk and milk products are routinely performed by a number of dairy laboratories to control the quality of these products with regard to e.g. nutritional components and potential exposure to toxic elements. In order to improve and control the quality of such analyses the Community Bureau of Reference (BCR) has organized series of certification campaigns to produce reference material of milk certified for a variety of elements and compounds. The increasing demand is such that the stock of some of these materials is now exhausted. Consequently, the BCR decided to produce a new batch of CRM of skim milk powder certified for its contents of Ca, Cu, Cl, I, Fe, K, Mg, P, Pb, N, Na and Zn (CRM 063R). This material was carefully prepared (spray-drying) and its homogeneity and long term stability was verified. This paper presents the certification work performed.     

Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Thin-layer chromatographic separation of aldrin,dieldrin, γ-hexachlorocyclohexane,malathion, ethyl-parathion,pentachlorophenol, and of chlordane,dieldrin, γ-hexachlorocyclohexane,malathion, ethyl-parathion,and pentachlorophenol from each other

A thin-layer chromatographic method is reported for the separation of aldrin (or chlordane), dieldrin, γ-hexachlorocyclohexane, malathion, ethyl-parathion, and pentachlorophenol from each other. The procedure, however, does not separate aldrin and chlordane from each other although it does separate either pesticide from the other components. The method employs alumina plates with n-hexane:xylene:benzene:toluene:cyclohexane:methyl cyclohexane (50:50:50:50:50:50:) as developing solvent.     

Syntheses, thermal stability, and structure determination of the novel isostructural RBa3B9O18 (R = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb)

A novel borate compound YBa(3)B(9)O(18) has crystallized in a melt of BaYB(9)O(16). Single-crystal X-ray diffraction measurements reveal that YBa(3)B(9)O(18) adopts a hexagonal space group P6(3)/m with cell parameters of a = 7.1761(6) A and c = 16.9657(6) A. The structure is made up of the planar B(3)O(6) groups parallel to each other along the (001) direction, regular YO(6) octahedra, and irregular BaO(6) and BaO(9) polyhedra to form an analogue structure of beta-BaB(2)O(4). A series of isostructural borate compounds RBa(3)B(9)O(18) (R = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb) were prepared by powder solid-state reactions. The DTA and TGA curves of YBaB(9)O(16) show an obvious weight loss at about 955 degrees C associated with a decomposition into YBO(3), B(2)O(3), and YBa(3)B(9)O(18) due to its incongruent melting behavior. The DTA and TGA curves of YBa(3)B(9)O(18) show that it is chemically stable and a congruent melting compound. A comparison of the structures of YBa(3)B(9)O(18) and beta-BaB(2)O(4) is presented.     

Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.     

Transition-metal-free O-, S-, and N-arylation of alcohols, thiols, amides, amines, and related heterocycles

A new protocol for the Ullmann-type arylation process of different aromatic heterocycles without any transition-metal catalyst, implying the use of a combination of an excess of potassium hydroxide and dimethyl sulfoxide, is described. The reaction can be performed between a broad range of starting nucleophiles including phenol, alcohols, amines, nitrogen-containing five-membered systems such as pyrazoles, imidazoles, and indoles, and amides with haloarenes, iodide and bromide derivatives giving the best results, the possible pathway involving the in situ generation of the corresponding benzyne intermediate. When the reaction was performed with 2-iodoaniline and either carboxamides or isothiocyanato derivatives, the corresponding benzoazole derivatives were obtained.