火焰原子吸收光谱法测定铜冶炼高碳烟尘中铅含量

采用NH_4HF_2-HCl-HNO_3-HClO_4消解体系处理铜冶炼过程中产生的高碳烟尘,使用火焰原子吸收光谱仪(AAS)进行测定,实现了对铅元素的测定。结果表明,铅金属质量浓度在1～10μg/mL范围内线性相关系数均为0.999 8,测得结果的相对标准偏差的精密度(RSD,n=11)在0.36%～1.7%,相对偏差在0.04%～0.07%,均远小于5%,实验方法适用于铜冶炼高碳烟尘中铅金属含量的测定。     

溴酸钾滴定法测定铜冶炼烟尘中的砷含量

研究了测定铜冶炼烟尘中砷含量的溴酸钾滴定方法。对测定体系中的各共存元素进行研究,探讨了测定方法的各项测定条件,方法的相对标准偏差RSD为0.13%～0.61%,样品加标回收率在99.5%～100%,方法精密度高,准确度好,适用于铜冶炼烟尘中砷含量为1.00%～50.00%的测定。     

电感耦合等离子体原子发射光谱（ICP-AES）法测定铜冶炼烟尘中锌

建立了电感耦合等离子体原子发射光谱(ICP-AES)法测定铜冶炼烟尘中锌含量的分析方法。针对样品中碳、硅含量高的特点,有针对性地研究了样品的消解方法,确定采用盐酸、硝酸、氢氟酸、高氯酸对铜冶炼烟尘样品进行消解。同时进行了干扰实验,确定样品中高含量的铜、铅、砷等对样品测定结果没有影响。并对仪器的工作参数进行了优化。方法检出限为0.011mg/L,测定下限为0.019mg/L,3个样品的相对标准偏差在0.54%～0.92%,加标回收率在96.0%～101%。样品消解完全,流程短,操作简单,快速,测定准确度高,可以满足铜冶炼烟尘中锌含量的测定。     

电感耦合等离子体光谱法测定铜冶炼烟尘中锌

本实验介绍了电感耦合等离子体光谱法测定铜冶炼烟尘中锌含量的分析方法。针对样品碳,硅含量高的特点,有针对性的研究了样品的消解方法,确定采用盐酸、硝酸、氢氟酸、高氯酸对铜冶炼烟尘样品进行消解。同时进行了干扰试验,确定样品中高含量的铜,铅,砷等对样品测定结果没有影响。并对仪器的工作参数进行了优化。方法检出限为为0.011 mg/L,测定下限为0.019 mg/L,3个样品的相对标准偏差在0.54%~0.92%之间,加标回收率在96%~101.14%之间。该方法样品消解完全,流程短,操作简单,快速,测定准确度高,可以满足铜冶炼烟尘中锌含量的测定。     

碘量法测定铜冶炼烟尘中铜

试验研究了铜冶炼烟尘中铜含量的测定方法,试料用盐酸、氢氟酸、硝酸、高氯酸及硫酸分解,氢溴酸除去砷、锡、锑,硫酸除去硒的干扰。进一步对滴定条件和共存元素的干扰及消除进行了试验,最终确定了最佳条件。按照实验方法测定6个铜冶炼烟尘样品中铜量,结果的相对标准偏差为0.22%~0.65%,精密度高,准确度好。样品加标回收率在98.92%~100.38%之间, 适用于铜冶炼烟尘中铜含量为5.00 %～65.00 %的测定。     

电感耦合等离子体质谱(ICP-MS)法测定锰矿冶炼烟尘中多种重金属元素

为了准确测定锰矿冶炼烟尘中重金属元素的含量,为锰矿冶炼过程中监测和评价环境影响提供有力的数据支撑,本文建立了电感耦合等离子体质谱法测定锰矿冶炼烟尘中的Cr、Ni、Cd、Tl、Pb等多种重金属元素的方法。采用HCl+HNO3+HClO4+HF消解体系对试样进行前处理,通过选用合适的内标溶液消除测定中的非质谱干扰,采用碰撞池模式和编辑校正方程消除质谱干扰,从而确定了最佳实验条件。实验结果表明,各元素标准曲线的线性相关系数均大于0.9999,方法检出限在0.007～0.094 mg/kg之间,样品测定的相对标准偏差(RSD,n=11)在0.43 %～4.93 %之间,样品加标回收率为93.8 % ～107.2%。方法具有操作简便、线性范围宽、检出限低、精密度高等优点,满足锰矿冶炼烟尘中Cr、Ni、Cd、Tl、Pb等多种重金属元素的同时测定要求。     

碘量法测定铜冶炼烟尘中铜含量

研究了铜冶炼烟尘中铜含量的测定方法,试料用盐酸、氢氟酸、硝酸、高氯酸及硫酸分解,氢溴酸除去砷、锡、锑,硫酸除去硒的干扰。进一步对滴定条件和共存元素的干扰及消除进行了实验,最终确定了最佳条件。按照实验方法测定6个铜冶炼烟尘样品中铜含量,结果的相对标准偏差为0.22%～0.65%,精密度高,准确度好。样品加标回收率在98.9%～100%,适用于铜冶炼烟尘中铜含量为5.00%～65.00%的样品测定。     

碘量法测定铜冶炼烟尘中铜含量

研究了铜冶炼烟尘中铜含量的测定方法,试料用盐酸、氢氟酸、硝酸、高氯酸及硫酸分解,氢溴酸除去砷、锡、锑,硫酸除去硒的干扰。进一步对滴定条件和共存元素的干扰及消除进行了实验,最终确定了最佳条件。按照实验方法测定6个铜冶炼烟尘样品中铜含量,结果的相对标准偏差为0.22%～0.65%,精密度高,准确度好。样品加标回收率在98.9%～100%,适用于铜冶炼烟尘中铜含量为5.00%～65.00%的样品测定。     

Na2EDTA滴定法测定铜冶炼烟尘中铋含量

研究了测定铜冶炼烟尘中铋含量的Na_2EDTA络合滴定方法。对测定体系中的各干扰元素进行了研究,探讨了测定方法的各项测定条件。方法的相对标准偏差为0.40%～0.67%,样品加标回收率在99.9%～100%,方法精密度高,准确度好。适用于铜冶炼烟尘中铋含量为5.00%～16.00%的测定。     

碱熔酸浸试样–碘量法测定铜冶炼白烟尘中的铜

建立碱熔酸浸试样–碘量法测定铜冶炼白烟尘中铜的方法。采用氢氧化钾–硝酸钾混合溶剂熔融试样,用盐酸浸取,以溴消除砷、锑等元素的干扰,用碘量法测定铜的含量。对滴定条件及共存元素的干扰和消除进行了验证,从而确定了最佳测定条件。实验最佳条件:4 g氢氧化钾和0.5 g硝酸钾混合溶剂;马弗炉温度650 ℃;样品称样量0.300 0 g;硫代硫酸钠标准溶液浓度0.02 mol/L。采用该实验条件,铜冶炼白烟尘中的铜测定结果相对标准偏差在0.37%~0.83%之间(n=10),样品加标回收率为98.30%~101.40%。该方法分析时间短,测定结果准确可靠,具有良好的精密度,可用于铜冶炼白烟尘中铜的测定。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.