苯氧威 (C17H19NO4) 的热容和热力学性质

通过小样品精密自动绝热量热计测定了自己合成并提纯的苯氧威 (C₁₇H₁₉NO₄) 在79 ～ 360 K温区的低温摩尔热容。量热实验发现, 该化合物在320 ~ 330 K温区, 有一固 - 液熔化相变过程, 其熔化温度为（326.31±0.14）K, 摩尔熔化焓、摩尔熔化熵及化合物的纯度分别为：(26.98±0.04) kJ• mol^-1和（82.69 0.09）J•mol^-1•K^-1和 (99.53±0.01 )%。并计算出了80-360 K的热力学参数。用分步熔化法得到绝对纯化和物的熔点为326.60±0.06 K。用差示扫描量热 (DSC) 技术对该物质的固-液熔化过程作了进一步研究，结果与绝热量热法一致。     

Heat Capacity and Enthalpy of Fusion of Crystalline Pyrimethanil Decylate (C22 H33 N3 O2)

IntroductionPyrimidinamines are heterocyclic compounds withnovel biological activities[1].They have been applied tomedicine and pesticide syntheses for their importantphysiological-action[2,3].Compared with the free py-rimethanil,pyrimethanil salts have a reduced vapourpressure,which increases the persistence of the com-pounds on crops and they have increased activities inmany aspects.Pyrimethanil decylate(molecular formu-la:C22H33N3O2)is an important new compound.Itcan be synthesized by the…     

Thermodynamic Characteristics of Phenacetin in Solid State and Saturated Solutions in Several Neat and Binary Solvents

The thermodynamic properties of phenacetin in solid state and in saturated conditions in neat and binary solvents were characterized based on differential scanning calorimetry and spectroscopic solubility measurements. The temperature-related heat capacity values measured for both the solid and melt states were provided and used for precise determination of the values for ideal solubility, fusion thermodynamic functions, and activity coefficients in the studied solutions. Factors affecting the accuracy of these values were discussed in terms of various models of specific heat capacity difference for phenacetin in crystal and super-cooled liquid states. It was concluded that different properties have varying sensitivity in relation to the accuracy of heat capacity values. The values of temperature-related excess solubility in aqueous binary mixtures were interpreted using the Jouyban–Acree solubility equation for aqueous binary mixtures of methanol, DMSO, DMF, 1,4-dioxane, and acetonitrile. All binary solvent systems studied exhibited strong positive non-ideal deviations from an algebraic rule of mixing. Additionally, an interesting co-solvency phenomenon was observed with phenacetin solubility in aqueous mixtures with acetonitrile or 1,4-dioxane. The remaining three solvents acted as strong co-solvents.     

苯氧乙酸嘧霉胺盐的低温热容和热力学性质研究

用精密自动绝热量热计测定了苯氧乙酸嘧霉胺盐在81-380 K之间的低温热容. 结果表明, 该化合物在81-328 K之间无相变和热异常现象发生, 在328-354 K之间发生固-液熔化, 其熔化温度、摩尔熔化焓和摩尔熔化熵分别为(349.38±0.03) K, (34.279±10) kJ/mol和(98.13±0.05) J/（K·mol）. 根据热力学函数关系式计算出苯氧乙酸嘧霉胺盐在80-325 K之间以标准状态(298.15 K)为基准的热力学函数值.     

2-氯-N,N-二甲基尼古丁酰胺的热容和热力学性质研究

Low-temperature heat capacities of 2-chloro-N,N-dimethylnicotinamide were precisely measured with a high-precision automated adiabatic calorimeter over the temperature range from 82 K to 380 K. The compound was observed to melt at （342.15±0.04） K. The molar enthalpy AfusionHm, and entropy of fusion, △fusionSm, as well as the chemical purity of the compound were determined to be （21387±7） J·mol^-1, （62.51±0.01） J·mol^-1·K^-1, （0.9946±0.0005） mass fraction, respectively. The extrapolated melting temperature for the pure compound obtained from fractional melting experiments was （342.25±0.024） K. The thermodynamic function data relative to the reference temperature 298.15 K were calculated based on the heat capacity measurements in the temperature range from 82 to 325 K. The thermal behavior of the compound was also investigated by different scanning calorimetry.     

Thermodynamic studies of monuron

Monuron (C₉H₁₁ClN₂O; N,N-dimethyl-N′-(4-chlorophenyl) urea, CAS 150-68-5) was synthesized and the heat capacities of the compound were measured in the temperature range from 79 to 385 K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The enthalpy and entropy data of the compound relative to the reference temperature 298.15 K were derived based on the heat capacity data. The thermodynamic properties of the compound were further investigated through DSC and TG analysis. The melting point, the molar enthalpy, and entropy of fusion were determined to be 447.6±0.1 K, 29.3±0.2 kJ mol⁻¹, and 65.4 J K⁻¹ mol⁻¹, respectively.     

4-羟甲基吡啶的热力学性质

用精密自动绝热量热计测定了4-羟甲基吡啶在79～380 K温区的摩尔热容. 实验结果表明, 该化合物在79～301 K温区无相变和热异常现象发生, 在301～331 K, 发生固-液相变, 其熔化温度、摩尔熔化焓及摩尔熔化熵分别确定为：325.12 K, 11.78 kJ•mol^-1 和36.23 J•K^-1•mol^-1. 根据热力学函数关系式, 从热容值计算了4-羟甲基吡啶在80～380 K温区以标准状态（298.15 K）为基准的热力学函数值. 用热重法(TG)对该化合物的热稳定性作进一步考察, 从TG曲线上观察到该化合物在490 K有最大的蒸发失重速率.     

Low-temperature heat capacity and thermodynamic properties of crystalline carboxin (C12H13NO2S)

Carboxin was synthesized and its heat capacities were measured with an automated adiabatic calorimeter over the temperature range from 79 to 380 K. The melting point, molar enthalpy (Δ_fusH_m) and entropy (Δ_fusS_m) of fusion of this compound were determined to be 365.29±0.06 K, 28.193±0.09 kJ mol⁻¹ and 77.180±0.02 J mol⁻¹ K⁻¹, respectively. The purity of the compound was determined to be 99.55 mol% by using the fractional melting technique. The thermodynamic functions relative to the reference temperature (298.15 K) were calculated based on the heat capacity measurements in the temperature range between 80 and 360 K. The thermal stability of the compound was further investigated by differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis. The DSC curve indicates that the sample starts to decompose at ca. 290 °C with the peak temperature at 292.7 °C. The TG-DTG results demonstrate the maximum mass loss rate occurs at 293 °C corresponding to the maximum decomposition rate.     

Thermodynamics of solution of histidine

The enthalpies of solution of l-histidine in water at 288.15-318.15 K and 0.003-0.15 mol kg⁻¹ were measured. The enthalpies of solution were found to be independent of the solute molality up to ∼0.1 mol kg⁻¹. Standard enthalpies and heat capacities of solution were computed. Free energies and entropies of solution have been estimated in the temperature range studied using literature solubility data and the results of the present study. The temperature increase was found to result in a pronounced rise of the l-histidine solubility due to the significant increase of the TΔS values. The characteristic temperatures for the thermodynamic properties of histidine aqueous solutions were estimated.     

Low-temperature Heat Capacities and Thermodynamic Properties of Hydrated Sodium Cupric Arsenate [ NaCuAsO4·1.5H2O(s)]

Low-temperature heat capacities of the solid compound NaCuAsO4 · 1.5H2O(s) were measured using a precision automated adiabatic calorimeter over a temperature range of T = 78 K to T = 390 K. A dehydration process occurred in the temperature range of T = 368-374 K. The peak temperature of the dehydration was observed to be TD = (371.828±0.146) K by means of the heat-capacity measurement. The molar enthalpy and entropy of the dehyperimental values of heat capacities for the solid(Ⅰ) and the solid-liquid mixture(Ⅱ) were respectively fitted to two polynomial equations by the least square method. The smoothed values of the molar heat capacities and the fundamental thermodynamic functions of the sample relative to the standard reference temperature 298.15 K were tabulated at an interval of 5 K.     

Experimental and theoretical study of thermodynamic properties of levoglucosan

The heat capacity of levoglucosan was measured over the temperature range (5 to 370) K by adiabatic calorimetry. The temperatures and enthalpies of a solid-phase transition and fusion for the compound were found by DSC. The obtained results allowed us to calculate thermodynamic properties of crystalline levoglucosan in the temperature range (0 to 384) K. The enthalpy of sublimation for the low-temperature crystal phase was found from the temperature-dependent saturated vapor pressures determined by the Knudsen effusion method. The thermodynamic properties of gaseous levoglucosan were calculated by methods of statistical thermodynamics using the molecular parameters from quantum chemical calculations. The enthalpy of formation of the crystalline compound was found from the experiments in a combustion calorimeter. The gas-phase enthalpy of formation was also obtained at the G4 level of theory. The thermodynamic analysis of equilibria of levoglucosan formation from cellulose, starch, and glucose was conducted.     

Heat capacity and thermodynamic properties of N-(2-cyanoethyl) aniline (C9H10N2)

The low temperature heat capacities of N-(2-cyanoethyl)aniline were measured with an automated adiabatic calorimeter over the temperature range from 83 to 353 K. The temperature corresponding to the maximum value of the apparent heat capacity in the fusion interval, molar enthalpy and entropy of fusion of this compound were determined to be 323.33 ± 0.13 K, 19.4 ± 0.1 kJ mol⁻¹ and 60.1 ± 0.1 J K⁻¹ mol⁻¹, respectively. Using the fractional melting technique, the purity of the sample was determined to be 99.0 mol% and the melting temperature for the tested sample and the absolutely pure compound were determined to be 323.50 and 323.99 K, respectively. A solid-to-solid phase transition occurred at 310.63 ± 0.15 K. The molar enthalpy and molar entropy of the transition were determined to be 980 ± 5 J mol⁻¹ and 3.16 ± 0.02 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions of the compound [H_T − H_298.15] and [S_T − S_298.15] were calculated based on the heat capacity measurements in the temperature range of 83–353 K with an interval of 5 K.     

Solubility of solid mixtures in supercritical fluids

Kurnik, R.T. and Reid, R.C., 1982. Solubility of solid mixtures in supercritical fluids. Fluid Phase Equilibria, 8: 93-105Supercritical fluids are receiving widespread attention as possible extraction agents for relatively non-volatile solids and liquids. Previous studies of the solubility of solids in supercritical fluids have been limited to pure solids. These pure-component data are interesting and indicate novel properties of supercritical fluids in this respect. The more general problem, however, lies in determining the solubility of multicomponent solids in supercritical fluids. Experimental data have now been obtained on the solubilities of binary, solid hydrocarbon mixtures in both supercritical carbon dioxide and supercritical ethylene. Most of the behavior exhibited by pure solids in supercritical fluids still exists for multicomponent solid solute systems (e.g., retrograde solidification, solubility extrema), but new phenomena were also found. The most interesting finding is that the solubility of a solid component when in a multicomponent solute system can be as much as 300% higher than the component solubility in a pure solid system at the same operating conditions. The multicomponent-solid-fluid data usually correlate well with thermodynamic theory.     

Thermodynamics of 4’-bromomethyl-2-cyanobiphenyl in different solvents

The melting properties and the heat capacity of the solid state and the melt state 4’-bromomethyl-2-cyanobiphenyl (OTBNBr) were determined. The enthalpy, entropy and Gibbs free energy of fusion were also calculated. The solubility of OTBNBr in eight organic solvents was experimentally measured at temperatures from (283.15 to 323.15) K by using a static method. The reasons for the differences of the solubility of OTBNBr in various solvents are discussed by using the intermolecular interaction. Furthermore, the experimental solubility values were well correlated by the modified Apelblat equation, the λh equation, the Wilson model and the van’t Hoff equation. Finally, the temperature dependence of the activity coefficient and the van’t Hoff enthalpy in the tested solutions was investigated and is discussed.     

烟酸钠Na(C6H4NO2)(s)的低温热容和热化学

选择分析纯烟酸和无水醋酸钠作为反应物, 用室温固相合成方法合成了无水烟酸钠. 利用FTIR和X射线粉末衍射等方法进行了表征, 利用化学分析和元素分析确定其组成为Na(C6H4NO2). 用精密自动绝热热量计测量其在78~400 K温度区间的低温热容. 研究结果表明, 该化合物在此温度区间无热异常现象发生. 用最小二乘法将实验摩尔热容对温度进行拟合, 得到热容随温度变化的多项式方程. 用此方程进行数值积分, 得到在此温度区间每隔5 K的舒平热容值和相对于298.15 K时的热力学函数值. 在此基础上, 通过设计合理的热化学循环, 选用1 mol/L NaOH溶液作为量热溶剂, 利用等温环境溶解-反应热量计分别测得固相反应的反应物和产物在所选溶剂中的溶解焓, 得到固相反应的反应焓. 最后, 计算出无水烟酸钠的标准摩尔生成焓为: ΔfHm0[Na(C6H4NO2), s]=-(548.96±1.11) kJ/mol.     

Heat capacity and thermodynamic properties of crystalline ornidazole (C7H10ClN3O3)

The molar heat capacities of 1-(2-hydroxy-3-chloropropyl)-2-methyl-5-nitroimidazole (Ornidazole) (C₇H₁₀ClN₃O₃) with purity of 99.72 mol% were measured with an adiabatic calorimeter in the temperature range between 79 and 380 K. The melting-point temperature, molar enthalpy, Δ_fusH_m, and entropy, Δ_fusS_m, of fusion of this compound were determined to be 358.59±0.04 K, 21.38±0.02 kJ mol⁻¹ and 59.61±0.05 J K⁻¹ mol⁻¹, respectively, from fractional melting experiments. The thermodynamic function data relative to the reference temperature (298.15 K) were calculated based on the heat capacities measurements in the temperature range from 80 to 380 K. The thermal stability of the compound was further investigated by DSC and TG. From the DSC curve an intensive exothermic peak assigned to the thermal decomposition of the compound was observed in the range of 445-590 K with the peak temperature of 505 K. Subsequently, a slow exothermic effect appears when the temperature is higher than 590 K, which is probably due to the further decomposition of the compound. The TG curve indicates the mass loss of the sample starts at about 440 K, which corresponds to the decomposition of the sample.     

Physicochemical properties and solubility of alkyl-(2-hydroxyethyl)-dimethylammonium bromide

Quaternary ammonium salts, which are precursors of ionic liquids, have been prepared from N,N-dimethylethanolamine as a substrate. The paper includes specific basic characterization of synthesized compounds via the following procedures: nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectra, water content, mass spectroscopy (MS) spectra, temperatures of decompositions, basic thermodynamic properties of pure ionic liquids (the melting point, enthalpy of fusion, enthalpy of solid-solid phase transition, glass transition), and the difference in the solute heat capacity between the liquid and solid at the melting temperature determined by differential scanning calorimetry (DSC). The (solid + liquid) phase equilibria of binary mixtures containing (quaternary ammonium salt + water, or + 1-octanol) has been measured by a dynamic method over wide range of temperatures, from 230 K to 560 K. These data were correlated by means of the UNIQUAC ASM and modified nonrandom two-liquid NRTL1 equations utilizing parameters derived from the (solid + liquid) equilibrium. The partition coefficient of ionic liquid in the 1-octanol/water binary system has been calculated from the solubility results. Experimental partition coefficients (log P) were negative at three temperatures.     

Solubility behavior,dissolution thermodynamics and solute–solvent intermolecular interactions of a solid antioxidant product in water + isopropanol liquid mixtures from 298.15 to 320.15 K

The solid–liquid equilibria of a poorly water-soluble antioxidant agent namely naringoside were assayed to determine solubility in binary liquid mixtures of water?+?isopropanol (iso-PrOH) between 298.15 K and 320.15 K under atmospheric pressure. The mole fraction solubilities of naringoside in the saturated solution were determined using a combination of static shake-flask and ultraviolet spectrophotometry techniques. The dissolution behavior of naringoside was correlated with three solution models consisting of the van’t Hoff equation, the modified Apelblat equation and the Buchowski-Ksiazczak λH equation. The modified Apelblat equation was more consistent than the two other correlation models. Apparent thermodynamic analysis of naringoside dissolution was also performed at the mean harmonic temperature using the model parameters of the modified Apelblat equation. Furthermore, the Kamlet, Abboud and Taft Linear Solvation Energy Relationship (KAT-LSER) model was applied to analyze the effect of the solute–solvent intermolecular interactions on the solubility of this natural bioactive product.     

Heat capacity of poly(butylene terephthalate)

The low‐temperature heat capacity of poly(butylene terephthalate) (PBT) was measured from 5 to 330 K. The experimental heat capacity of solid PBT, below the glass transition, was linked to its approximate group and skeletal vibrational spectrum. The 21 skeletal vibrations were estimated with a general Tarasov equation with the parameters Θ₁ = 530 K and Θ₂ = Θ₃ = 55 K. The calculated and experimental heat capacities of solid PBT agreed within better than ±3% between 5 and 200 K. The newly calculated vibrational heat capacity of the solid from this study and the liquid heat capacity from the ATHAS Data Bank were applied as reference values for a quantitative thermal analysis of the apparent heat capacity of semicrystalline PBT between the glass and melting transitions as obtained by differential scanning calorimetry. From these results, the integral thermodynamic functions (enthalpy, entropy, and Gibbs function) of crystalline and amorphous PBT were calculated. Finally, the changes in the crystallinity with the temperature were analyzed. With the crystallinity, a baseline was constructed that separated the thermodynamic heat capacity from cold crystallization, reorganization, annealing, and melting effects contained in the apparent heat capacity. For semicrystalline PBT samples, the mobile‐amorphous and rigid‐amorphous fractions were estimated to complete the thermal analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4401–4411, 2004