阳离子型微乳液聚合丙烯酰胺的表征

自从Hoar[1]和Schulman[2]利用乳化剂、水和油制得均一透明的微乳液以来,微乳液在许多领域中得到广泛应用.Candau[3,4]通过微乳液聚合得到分子量很高(105～106)的纳米级聚合物粒子,且聚合物分子链采取紧密缠绕的构象.Antonietti[5]在对苯乙烯微乳液聚合的研究报道中认为,聚合物分子链是以一种类似于网状交联结构的形态存在的,这些结果表明,通过微乳液聚合所得聚合物可能存在着一些特殊的性质.本文采用阳离子型乳化剂十六烷基三甲基溴化铵(CTAB)和脂肪族醇助乳化剂制备的油包水(W/O)型反相微乳液体系来聚合丙烯酰胺(Am),并与使用相同乳…     

超临界技术制备多孔聚合物微球及其应用

多孔聚合物微球被广泛应用在生物技术、医学工程、环境工程、食品安全、色谱填料等领域,因此受到材料科学家的广泛关注.超临界技术是一种廉价的绿色致孔技术,在多孔聚合物微球的制备方面具有广阔的发展前景.经悬浮聚合、乳液聚合、种子聚合、沉淀聚合等多种聚合方法合成聚合物微球,通过超临界干燥技术除去溶剂实现致孔,可得到高质量多孔聚合...     

微乳液聚合研究进展

从聚合机理和所得聚合物性能两个方面,分析总结了微乳液聚合与乳液聚合的差别.并介绍了微乳液聚合研究的国内外研究动态.     

油-微乳-盐水三相体系中间相微乳液的电子显微研究

利用液态乳液样品的冷冻溶蚀制样技术,对油-微乳-盐水三相体系中间相微乳作了电子显微镜观察,从形态学的角度对这一类型的微乳液的微观形态进行了分析,并结合胶体与界面化学的理论,对中间相微乳液的微组织结构作了一些探讨。     

辐射冷冻乳液聚合制备多孔聚合物微球

本文研究了常规苯乙烯乳液和苯乙烯细乳液在两种不同冷冻条件下,即液氮冷冻和-20℃冰箱冷冻过程中乳液体系稳定性的变化,以及γ射线辐射引发冷冻乳液中单体聚合得到的聚苯乙烯微球的形貌,并探讨了形貌形成机制.结果表明,乳液在-20℃冰箱中冷冻过程中乳液稳定性破坏,单体出现分层现象.而液氮冷冻可以保持冷冻前的乳液相态结构.γ射线辐射可以引发冻乳液中苯乙烯聚合,聚合过程中体系经历了从O/W乳液向W/O/W多重乳液的转变,最终形成粒径分布较宽,直径为1~20μm的泡孔状多孔PS微球.本工作不仅为低温聚合技术提供了新思路,也为多孔聚合物微球材料的制备提供了新方法.     

种子乳液聚合的研究进展

种子乳液聚合法因具有乳液稳定性更好、粒径分布窄、易控制等优点,在乳胶粒子设计及制备各种功能性胶乳方面具有重要作用,是制备高固含量乳液及具有核壳结构乳液的最常见最简便的方法.本文综述了近年来种子乳液的聚合工艺、聚合机理, 包括接枝机理、互穿聚合物网络机理、聚合物沉积机理、种子表面聚合机理和离子键合机理等,以及种子乳液聚合在乳胶粒子设计方面的应用研究进展,并讨论了影响种子乳液聚合的各种因素.     

聚乙烯醇多孔膜的制备

以醋酸乙烯酯微乳液聚合所得的微乳粒子为占孔物质,通过辅助倒相法制备了聚乙烯醇多孔膜,其中部分孔的尺寸与占孔微乳粒子的大小相近（小于300nm)。利用透射电镜观测微乳粒子的大小和形态并且在扫描电镜下观察PVA多孔膜的孔形态,探讨了通过控制微乳粒子粒径以实现多孔膜孔径调节的可行性。     

双模板体系中多级结构碳酸钡晶体的控制合成

在用细乳液聚合法制备聚合物微球的基础上,以此聚合物形成的不溶性自组装膜与可溶性的修饰剂聚丙烯酰胺组成的双模板为三维聚合物模板体系,成功完成了多孔、刺球等具有复杂多级结构碳酸钡晶体的制备.实验过程中发现,调节双模板的组成可精确调控碳酸钡晶体的成核与生长.同时,多孔碳酸钡晶体为典型的大孔材料,孔径为103.4 rm,BET...     

高分子多孔微球产品的制备及其在类病毒颗粒分离纯化中的应用

高分子多孔微球在医药领域的分离纯化中应用广泛,是重要的化工产品。高分子多孔微球的形成是一个复杂的过程,利用聚合物与有机溶剂致孔剂的相分离,可得到小于100 nm孔径的多孔微球;而水和疏水性聚合物之间相分离程度远大于有机溶剂与聚合物间的相分离程度,因此可获得大于100 nm孔径的多孔微球。针对不同应用领域选择不同的方法,设计并制备出合理的微球结构,对多孔微球的实际应用十分关键。本综述介绍了纳孔、介孔、大孔微球产品的制备方法悬浮聚合和种子聚合法,重点介绍本课题组制备超大孔微球的方法--反胶团溶胀法和W/O/W复乳法,上述两种方法解决了常规方法难以制备大孔径微球产品的问题,拓展了多孔微球在类病毒颗粒等大尺寸蛋白分离纯化领域的应用。在此基础上,以HB-VLPs为模型对比了不同孔径微球对类病毒颗粒吸附量、回收率、结构、以及纯化效果的差异,揭示超大孔微球产品在类病毒颗粒分离纯化中的优势。     

微乳液聚合制备多孔高吸油甲基丙烯酸酯类树脂的研究

研究了双连续相微乳液聚合制备多孔高吸油树脂,以甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)为共聚单体(油相),水(H2O)/乙醇(EtOH)为混合水相,2,2′-偶氮二异丁腈(AIBN)为引发剂,采用十二烷基硫酸钠(SDS)和复配十二烷基硫酸钠/吐温80(SDS/T80)两种乳化体系,调节油相和水相比例,配制出双连续相微乳液.聚合在无搅拌下进行.研究了乳化体系、混合水相含量、单体配比、交联剂和引发剂用量等因素对树脂吸油性能的影响.结果表明,多孔高吸油树脂比同系无孔树脂的吸油速率大大提高,最快可以在2min内达到吸油饱和.树脂对苯,四氢呋喃,四氯化碳的吸油倍率分别达到15.5g/g,15.5g/g,31.7g/g.     

有机硅-丙烯酸酯聚合物乳液合成及粒径分析

通过种子乳液半连续法合成了有机硅改性丙烯酸酯聚合物乳液,并对其粒子形态及分布进行分析。结果表明:通过种子乳液半连续聚合工艺可制备出固含量42wt%,乳化剂含量4wt%(基于单体量)、窄分布纳米粒子的有机硅改性丙烯酸酯聚合物乳液。随反应进行,粒径分布变窄,平均粒径逐渐增大。随乳化剂中SDS与OP-10的摩尔比减少,粒径增大。     

Synthesis of sponge-like polymer dispersions via polymerization of bicontinuous microemulsions

Polymer gels with high water content are made by polymerization of hydrophilic/hydrophobic monomer mixtures in bicontinuous microemulsions. These structures can be described as a heterophasic, bicontinuous polymer colloid-in-water structure, the characteristic length of which is only indirectly influenced by the original microemulsion mixture.The structure formation and phase changes throughout the polymerization reaction are followed with rheology, polarization microscopy, and scanning and transmission electron microscopy. It is shown that already the very first formed polymer changes disturb the bicontinuous phase structure and nucleate a vesicular phase; with further consumption of the monomer mixture, at least three other phase transitions can be detected, ending with a simple globular surfactant structure.Although direct templating of the original mesomorphous structure does not occur, the existence of the diverse lyotropic phases influences the final structure. It is shown that simple dilution changes the characteristic length of the network elements from about 2 m down to 50 nm. This is explained by a combination of a nucleation-and-growth mechanism with the influence of a restricted colloidal stability in anisometric lyotropic phases.     

辛烷基酚聚氧乙烯醚反相微乳体系的相行为及纳米复合碳酸盐的制备

绘制了一系列辛烷基酚聚氧乙烯醚(OP-10)+正辛醇+环己烷+水(或CaCl₂水溶液)拟三元体系相图,分别研究了助表面活性剂正辛醇的添加比例和CaCl₂水溶液的浓度对微乳区域的影响,发现在OP-10+正辛醇+环己烷+水拟三元体系相图中,随着正辛醇/OP-10的质量比逐渐增大,微乳区的面积逐渐增大,当正辛醇/OP-10质量比为1:2.5时微乳区的面积最大,之后微乳区面积随着其质量比的增大而减小,表明适量地加入助表面活性剂正辛醇有利于微乳区的形成;但过多地增加正辛醇的量反而不利于微乳相的形成。 确定正辛醇/OP-10的质量比为1:2.5,改变CaCl₂的浓度,发现OP-10+正辛醇+环己烷+CaCl₂水溶液拟三元体系相图中,CaCl₂浓度为0.1 mol/L时微乳区面积最大。分别配制总浓度为0.1 mol/L的5种不同摩尔比的Ca²⁺/Ba²⁺微乳液,并与等摩尔的碳酸钠水溶液反应制备共沉淀碳酸盐,使用扫描电子显微镜(SEM)对所制备样品进行表征分析,发现当微乳液为钙离子盐时,主要形成大的立方形颗粒;掺入钡离子,Ca²⁺和Ba²⁺摩尔比为3:1、1:1和1:3时,形成的沉淀分别为四棱锥形、球形和玉米棒形;当微乳液为钡离子盐时,沉淀主要为不规则多面体。     

CONTROLLED/"LIVING" RADICAL POLYMERIZATION OF STYRENE IN AN AQUEOUS DISPERSION SYSTEM

Atom transfer radical polymerization (ATRP) of styrene catalyzed by cuprous (CuX)/1, 10-phenanthroline (Phen)and CuX/CuX_2/Phen was conducted in an aqueous dispersed system. A stable latex was obtained by using ionic surfactantsodium lauryl sulfonate (SLS) or composite surfactants, such as SLS/polyoxyethylene nonyl phenyl ether (OP-10),SLS/hexadecanol and SLS/OP-10/hexadecanol. Among which SLS and SLS/OP-10/hexadecanol systems established betterdispersed effect during the polymerization. It was found that Phen was a more suitable ligand than N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) to maintain an appropriate equilibrium of the activator Cu(I) and the deactivatorCu(II) between the organic phase and the water phase. The effect of several initiators (such as EBiB, CCl_4 and 1-PEBr) andthe temperature on such a kind of ATRP system was also observed. The number-average molar mass (M_n) of polystyrene (PS)increased with the conversion and the molar mass distribution (M_w/M_n) remained narrow. These experimental data show thatthe polymerization could be controlled except for the quick increase of monomer conversion and the number-average molarmass of PS in the initial stage of polymerization. Furthermore, the initiator efficiency was found to be low (～57%) inCuX/Phen catalyzed system. To overcome this problem, Cu(II)X_2 (20 mol%-50 mol% based on CuX) was introduced intothe polymerization system. In this case, higher initiator efficiency (60%-90%), low M_w/M_n of PS (as low as 1.08) wereachieved and the molar masses of the PS fit with the theoretical ones.     

Sugar-based microemulsion glass templates

Complex fluids comprising of surfactants with water and/or oil form a rich variety of dynamic self-assembled structures, ranging from spherical swollen micelles, viscous rod-like micelles, and bicontinuous microemulsions to ordered liquid crystalline phases. The wide range of practical and specialized applications of complex fluids has made them the subject of intense research for many decades. Here, we demonstrate for the first time how bicontinuous microemulsions containing equal masses of oil and sugar can be driven to the glassy state without phase separation at ambient temperatures by controlled desiccation of sugar-rich microemulsions. The robust nanostructure of these microemulsion glasses allows polymerization of hydrophobic liquid monomers within the interstices of the glassy microemulsion template without macroscopic phase separation. Yet after polymerization, the sugar and surfactant template can be easily removed by dissolution in water.     

含氟丙烯酸酯共聚乳液的制备及表征

采用十二烷基硫酸钠和壬基酚聚氧乙烯醚(OP-10)混合乳化剂，制备了粒径为40-50nm的甲基丙烯酸全氟辛基乙酯(FMA8)-甲基丙烯酸丁酯(BMA)-甲基丙烯酸(MA)共聚物乳液。通过DSC、、FTIR、^1H-NMR等手段对共聚物进行了表征。考察了乳液的稳定性、乳胶膜的吸水性和耐溶剂性以及全氟单体的含量对聚合反应的影响。     

New Core-Shell Type Polymeric Supports Based on the Amberlite XAD-4 Adsorbent: A Novel Synthesis Procedure

The chloromethyl groups have been introduced into commercial S/DVB copolymer matrixes via interpenetrating polymer networks (IPN) synthesis. The procedure involves impregnation of the Amberlite XAD‐4 adsorbent, with use of the vinylbenzyl chloride (VBC) and divinylbenzene (DVB) monomers mixture, and suspension polymerization process. The syntheses were evaluated by FT‐IR spectra and SEM analyses and furthermore by chlorine content determination as well as characterization of porous structure by nitrogen adsorption at liquid nitrogen temperature. Designed synthesis approach allowed determining organic and water phases composition. Furthermore, impact of an excess of the organic phase removal method has been investigated. Basing on the obtained results it could be stated that the chloromethyl groups, derived from VBC monomer, were successfully introduced into the XAD‐4 structure. Captured SEM images revealed significant changes in the beads' surface morphology after polymerization processes. The presented studies reveal designed and executed synthesis processes, which involve the use of a proper water phase and excess of organic phase removal. Observed changes in the beads' morphology suggest that introduced functionalities are concentrated on the porous surface of the XAD‐4 adsorbent.     

Properties and characterization of novel cationic polyacrylate latex containing fluorine and silicon prepared with soap-free emulsion polymerization

The novel cationic polyacrylate latex containing fluorine silicon was successfully prepared via soap-free emulsion polymerization of butyl acrylate, methyl methacrylate, vinyltriethoxysilane and hexafluorobutylmethacrylate in water phase, which were initiated with water soluble azo initiator and emulsified with the mixed surfactants polymerizable emulsifier and OP-10. The films of the resultant latex were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and contact angle (CA) determinator, respectively. In comparison with the conventional polyacrylate latex, the thermal stability and water resistance of novel latex film are improved. The conditions of preparing the novel cationic acrylate latexes were optimized. The optimum conditions of preparing the novel latex are as follows: the amount of emulsifiers and the initiator are 6.0% and0.3%, respectively; both the amount of VETS and amount of HFMA are 6.0%. In this case, the conversion is high and the polymerization stability is good.     

微乳液体系相图的研究及其在纳米氟化物制备中的应用

绘制了十六烷基三甲基溴化铵(CTAB)/正丁醇(n-C₄H₉OH)/正辛烷(n-C₈H₁₈)/水[或NH₄F溶液、或Ba(NO₃)₂溶液、或KNO₃-Mg(NO₃)₂混合溶液]四组分微乳体系的拟三元相图.观察了电导率随水(或盐溶液)含量变化的规律,很好地印证了微乳液体系的相行为.选取相图中微乳区点作为最佳条件,制备了KMgF₃纳米粒子.