W/O型微乳液中不同形貌PbS纳米粒子的制备及其形成机理的探讨

用聚乙二醇辛基苯基醚(OP)/异辛醇/环己烷/水溶液所形成的微乳液体系控制合成出了PbS纳米粒子，考察了微乳液中水与表面活性剂的物质的量的比(ω₀)、反应物浓度及浓度比、陈化时间等条件对产物形貌的影响。采用透射电子显微镜(TEM)、X-射线衍射(XRD)分别对产物的结构、粒度和形貌进行了表征。结果表明，在微乳液体系中，控制不同的实验条件，可以成功地合成球形、梭形、针状和棒状的PbS纳米粒子，并且粒径分布集中，无团聚现象。论文还对不同形貌PbS纳米粒子的形成机理进行了探讨。     

反相微乳液中憎水性纳米金的原位还原法合成

利用十八胺(C18NH2)/正丁醇/正庚烷/HAuCl4(aq)W/O型微乳液体系,在常温的碱促进条件下由正丁醇原位还原氯金酸合成了具有高度单分散的憎水性金纳米粒子。由C18NH2稳定的金纳米颗粒运用紫外可见光谱(UV-vis)、透射电镜(TEM)和X射线衍射(XRD)等分别进行了表征和分析,并探讨了微乳液体系各组分对形成金纳米粒子形貌、尺寸和单分散性的影响。结果显示,随十八胺/氯金酸摩尔比的增加,金粒子的尺寸逐渐减小而单分散性逐渐提高。在正丁醇原位慢还原氯金酸的过程中,实验所选W/O型微乳液模板和表面活性剂十八胺分子对憎水性金纳米粒子的形貌和尺寸仍具有良好的控制作用。     

纳米粒子稳定乳液及其在纳米结构合成中的应用*

本文在介绍常规乳状液、微乳液和固体稳定乳液的基础上,着重综述了纳米粒子稳定乳液的特点及其在纳米结构合成中的应用进展,并对目前该研究领域亟待解决的问题进行了分析。纳米粒子稳定乳液具有独特的油、水、固三相环境和水油、水固、油固三个相界面,分散相液滴尺寸可以在微米、亚微米乃至纳米尺度调节,因而可以作为合成组成、结构和性能极为丰富多样的纳米结构的介质。纳米粒子对乳液稳定作用的机理,以及纳米粒子稳定乳液中化学反应的特殊规律还有待深入研究。本文在介绍固体稳定乳液的基础上,着重综述了纳米粒子稳定乳液的特点及其在纳米结构合成中的应用进展,并对目前该研究领域亟待解决的问题进行了分析。纳米粒子稳定乳液具有独特的油、水、固三相环境和水油、水固、油固三个相界面,分散相液滴尺寸可以在微米、亚微米乃至纳米尺度调节,因而可以作为合成组成、结构和性能极为丰富多样的纳米结构的介质。纳米粒子对乳液稳定作用的机理,以及纳米粒子稳定乳液中化学反应的特殊规律还有待深入研究。     

O／W微乳液中聚邻甲苯胺超微粒子的制备

聚邻甲苯胺具有较高的电导率、较好的贮存电荷的能力和良好的环境稳定性，因而具有较大的应用价值［’－‘j，其合成方法主要有电化学合成法和化学合成法［‘·’J．化学会成法所得聚邻甲苯肢的粒子一般大于100urn．近年来，以表面活性剂聚集体微乳液、溶致液晶为介质，制备超微粒子材料已为人们所关注「’－’］．以微乳液为介质进行聚合反应亦引起重视，但大部分微乳液聚合都是在四组分微乳液（表面活性剂、助表面活性剂、单体和水）中进行‘”·“‘．近年来，某些油溶性单体已成功地在无助表面活性剂的三组分微乳液中聚合［‘’·‘’1…     

微乳辅助的溶剂热法合成磷酸钐纳米棒

自1991年碳纳米管被发现以来,一维纳米材料以其独特的电、磁、光学和机械性质以及在纳米器件和功能材料上的巨大应用潜力而引起全世界的广泛关注,人们通过模板法、溶胶-凝胶法、水热法及微乳液法等多种方法合成了一系列一维纳米材料,其中微乳液法是近几年来兴起的较有发展前景的纳米材料的合成方法,微乳液是由油相、水相、表面活性剂和助表面活性剂组成的均匀稳定的体系,水相在表面活性剂和助表面活性剂的作用下均匀地分散在油相中,     

AHOT/异辛烷反胶束体系制备铁酸钴纳米粒子

分别以阴离子表面活性剂二(2-乙基己基)丁二酸酯磺酸钠(AOT)和新型表面活性剂二(2-乙基己基)羟基丁二酸酯磺酸钠(AHOT)与异辛烷/水构建的反胶束体系为微反应器,合成了CoFe2O4纳米粒子;利用TGA,XRD,TEM等手段对产物进行了表征;讨论了两种表面活性剂构建的反胶束体系对产物合成过程及纳米粒子形貌和尺寸的影响.     

碱式碳酸铜微球的表面改性和组装

报道了通过分散聚合反应在碱式碳酸铜微球表面锚接聚苯乙烯纳米粒子, 以调节其亲水/亲油性的方法. 结果表明, 锚接的聚苯乙烯纳米粒子尺寸愈大, 所得的改性碱式碳酸铜微球疏水性愈强. 用对油和水润湿性适中的改性碱式碳酸铜微球为乳化剂, 能够制备出稳定的油包水型Pickering乳液. 改性碱式碳酸铜微球组装在Pickering乳液的分散相液滴表面, 形成一个固体壳层. 将Pickering 乳液的分散相水核凝胶化, 合成出分级结构琼脂糖凝胶微球.     

纳米氧化锌的乳液合成、结构表征与气敏性能

利用化学沉淀法、乳液法及微乳液法合成了不同晶粒尺寸的纳米氧化锌气敏材料；用X射线衍射和透射电镜、研究了材料的晶体结构和陶瓷微结构，并利用科西-科西法和德拜-谢乐法计算了材料的平均晶粒度和晶格畸变；和静态配气法测试了材料对乙醇、汽油、氢气、丁烷、六氟化硫的气体灵敏度。实验结果表明：微乳液法和阴离子表面活性剂乳化法合成的氧化锌具有颗粒小，气体灵敏度高和工作温度低的特点。     

羧甲基纤维素系列高分子表面活性剂形成微乳液的研究

采用紫外光谱、相图、动态激光光散射、同位素示踪、光学显微镜、电导率等研究了羧甲基纤维素系列高分子表面活性剂与甲苯-水-异丙醇体系微乳液的形成过程,发现微乳液粒子大小均一,形态一致,其尺寸比低分子表面活性剂所形成的微乳液粒子大得多.醇分子插入到油水界面,改变了两相界面结构,促使微乳液的生成.电导率测定表明所形成的微乳液区均为水包油结构,即使在富含甲苯区域,亦不会有油包水的反相胶束形成.     

荧光增强核壳结构NaYF_4:Yb,Er@NaGdF_4@SiO_2@Ag上转换荧光纳米粒子的制备与性能

通过热分解法合成了NaYF_4:Yb,Er油溶性上转换荧光纳米粒子,并以NaYF_4:Yb,Er为晶种制备了核壳结构的NaYF_4:Yb,Er@Na Gd F4荧光纳米粒子,经荧光测试纳米粒子的荧光性能提高了8倍。用反相微乳液法在纳米粒子表面包覆了一层Si O2-(CH2)3-NH2,有效地改善了纳米粒子的水溶性。在Si O2表面沉积Ag纳米粒子,通过贵金属纳米粒子表面等离子共振效应进一步增强了复合纳米粒子的荧光性能,经测试纳米粒子荧光性能又提高了8倍。通过小鼠体内成像实验,发现所合成的纳米粒子生物体内具有较强荧光成像功能。试验中还发现表面活性剂Igepal CO-520和TEOS对包覆层形貌有着重要的影响。     

Molecular dynamics studies of the structure and properties of polymer nano-particles

Recently, we have developed an experimental technique for the production of monodisperse polymer particles with arbitrary size and composition. In order to examine the behavior and properties of polymer particles in the micron and submicron size, computational simulations were employed. A molecular dynamics based method for the generation and analysis of polymeric nano-particles is described in this article. This technique is used to study the dynamics as well as the behavior and the structural, thermal, and mechanical properties of nano-meter scale polymer particles.     

Direct large-scale synthesis of perovskite barium strontium titanate nano-particles from solutions

This paper reports a wet chemical synthesis technique for large-scale fabrication of perovskite barium strontium titanate nano-particles near room temperature and under ambient pressure. The process employs titanium alkoxide and alkali earth hydroxides as starting materials and involves very simple operation steps. Particle size and crystallinity of the particles are controllable by changing the processing parameters. Observations by X-ray diffraction, scanning electron microscopy and transmission electron microscopy TEM indicate that the particles are well-crystallized, chemically stoichiometric and ∼50 nm in diameter. The nanoparticles can be sintered into ceramics at 1150 °C and show typical ferroelectric hysteresis loops.     

纳米复合镀技术

纳米粒子具有的量子尺寸效应，表面效应和宏观量子隧道效应等，使其表现出很多独特的物理及化学性能，采用液相金属电沉积技术，通过将纳米粒子引入金属镀层中形成的纳米复合镀层，显示出优越的机械性能，电催化性能，耐腐蚀性能等，正逐渐成为研究的热点，本文介绍了纳米复合镀层的制造技术及纳米复合镀层的结构以及纳米复合镀层的研究现状。     

毛细管电泳在纳米粒子分离和性质表征中的应用进展

毛细管电泳方法被成功用于分离性质不同的纳米粒子,并且可对纳米粒子的表面zeta电势、等电点及表面电荷等表面性质进行表征.本文综述了毛细管电泳法在纳米粒子的分离分析以及其表面性质研究中的应用进展.     

Controlled synthesis of cobalt nanocrystals on the carbon spheres for enhancing Fischer–Tropsch synthesis performance

Non-porous carbon sphere was used as support to synthesize supported cobalt Fischer-Tropsch catalysts with high activity and durability. Strong metal-support interaction was avoided and intrinsic activity of pristine cobalt nano-particles was studied. Thermal decomposition synthesis method was applied to obtain cobalt catalysts with high dispersion and narrow particle size distribution. Furthermore the cobalt size can be controlled by the molar ratio of o-dichlorobenzene/benzylamine. Compared with supported cobalt catalysts prepared by incipient wetness impregnation method and ultrasonic impregnation method,the catalyst prepared by thermal decomposition method showed higher catalytic activity, higher long chain hydrocarbons selectivity and lower methane selectivity.     

Novel preparation and properties of magnesioferrite nanoparticles

Nano-magnetic magnesium ferrite particles were synthesized by a simple and cost-effective method using different ratios between Mg/Fe precursors and fuel. Significant effects of these ratios on the crystalline phases, crystallite size, particle size, lattice constant, morphological and magnetic properties of the as-synthesized nano-particles have been investigated. Phase evolution, morphological and magnetic characteristics were determined by XRD, SEM, EDX and VSM techniques. The results obtained revealed that the as-prepared Mg ferrite nano-particles have the nanometer size and partially inverse spinel structure. Nano-structured magnesium ferrite spinel has been synthesized with various cyrystallite sizes ranging from 8 to 66 nm. Room temperature magnetization results showed that the magnetic properties of Mg ferrite nano-particles depend upon their size and crystallinity. The saturation magnetization for the sample having the highest crystallite size was 32.85 emu/g.     

Trial Test of Supported Nanosized Catalyst in Catalytic Reformate Hydrotreating Reaction

Nanostructured particles are a new kind of materials whose size is less than 100 nm. It is obvious that the properties(e.g. electronic, magnetic, catalytic, optical and themal etc) of nano-particles are more excellent than those of traditional materials because of high specific surface area and special structure. Up to now, nano-particles have been studied and will be developed as a new kind of catalysts in the oil and chemical industry as well as environment protection fields. In this paper, catalytic properties of the nano-Pd/Al₂O₃ catalyst were studied for catalytic reformate hydrotreating reaction.     

胃蛋白酶对CdTe纳米粒子的表面修饰及分析应用

以巯基乙酸为稳定剂和表面修饰剂, 在有机相中合成了平均粒径为3 nm左右的CdTe纳米粒子, 用胃蛋白酶改变纳米粒子的表面修饰状态并研究其系列特性. CdTe纳米粒子在320 nm处有强的紫外吸收, 在524.8 nm处有荧光发射. 经胃蛋白酶对其表面修饰后, 紫外吸收峰位不变, 但吸光强度升高, 荧光峰位蓝移至467.2 nm, 荧光强度降低. 温度、pH值及离子强度均对表面修饰产生影响. 在最佳实验条件下, 胃蛋白酶质量浓度在4—40 mg/L范围内与荧光降低值之间呈线性关系, 检测限(3σ)为0.28 mg/L(n=10), 该方法已被用于人体胃液胃蛋白酶的测定.     

修饰离子聚合度对膜-颗粒体系静电自组装的影响

采用不同聚合度的季铵阳离子聚合物作为修饰离子,对纳米Pt颗粒的合成及其在全氟磺酸膜(Ｎａｆｉｏｎ)上的静电自组装行为进行了研究,结合Ｎａｆｉｏｎ膜电导率的变化对膜-颗粒自组装机理进行了分析。结果表明:自组装过程中Ｎａｆｉｏｎ膜电导率的下降总是比Pt组装量的上升先达到平衡,表明膜-颗粒体系(MPS)的静电自组装是一个先由大量的小阳离子占据空位,然后由离子修饰的大颗粒(纳米Pt)取代的过程；改变修饰离子的聚合度同时会引起组装液中游离修饰离子的数目的变化,从而对电导率的衰减速度和组装第二阶段的脱附-组装平衡造成影响,因此随着修饰离子聚合度的增加,导电率达到平衡的时间增加,组装量达到平衡的时间减少。     

Cellulose nano-particles from Pandanus: viscometric and crystallographic studies

Pandanus utilis a plant abundant throughout Kerala, India has been used as a source to isolate nano-particles. The fibres were extracted from Pandanus plant by biological natural retting. Extracted fibres were dried, ground and treated with 5 % NaOH followed by bleaching using 5 wt % hypochlorite solution. Bleached cellulose was hydrolysed using sulphuric acid. After centrifugation, suspension was freeze dried. Effect of Acid concentration, temperature and time of hydrolysis on the isolation of cellulose nanoparticles was studied. FESEM images of cellulose showed the presence of spherical nano-particles. Dynamic light scattering revealed homogeneous dispersion of nano-particles. Degree of polymerisation of cellulose was determined viscometrically using cupriethylene-diamine as solvent. Removal of lignin and hemicelluloses was confirmed from FTIR spectra. X-Ray diffractograms of powdered fibre, bleached cellulose and nano-cellulose were compared. Using peak height method and peak de-convolution method, crystallinity indices were determined. Using Scherrer equation crystallite size was calculated and it further confirmed that particles are of nanometre size.