Fe3O4-PMMA复合纳米微球的制备与表征

采用化学共沉淀法合成了超顺磁Fe3O4纳米粒子,并采用油酸和油酸钠对其表面进行修饰,制备了可稳定分散于水中的磁流体。以该磁流体为种子,通过一步乳液聚合制备了表面带有功能化羧基的Fe3O4-聚甲基丙烯酸甲酯复合纳米微球（Fe3O4-PMMA）。利用动态光散射、透射电镜观察、傅里叶红外光谱、热失重分析、振动样品磁强计测试等手段表征了复合微球的尺寸、形态、结构、组成和磁性能。结果表明,复合微球的平均直径约120nm,表面带有羧基功能基团,在室温下具有超顺磁性和较高的饱和磁化强度。     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

柠檬酸根辅助多元醇法制备直径和磁性可控的Fe_3O_4亚微球

以柠檬酸三钠作辅助剂,用多元醇溶剂热还原法制备了纳米晶粒和微球直径可控的、单分散的超顺磁Fe3O4亚微球.发现与铁原子有强亲和力的柠檬酸根能有效吸附在还原产生的初始Fe3O4纳米粒子表面,阻碍其晶粒生长和影响其静电排斥力的大小,从而能在较大范围内调控最终产物Fe3O4亚微球的直径和饱和磁化强度.改变柠檬酸根或铁盐浓度不但可以调控初始Fe3O4纳米粒子的粒径,而且可以在220-550nm范围内调控单分散Fe3O4亚微球的直径,从而得到粒径均一的超顺磁Fe3O4亚微球.     

磁性Fe_3O_4-聚吡咯纳米微球的合成与表征

报道了具有核壳结构的Fe3O4 聚吡咯磁性纳米微球的合成方法和表征结果 .微球同时具有导电性和磁性能 .在优化的实验条件下 ,可得到饱和磁化强度为 2 3 4emu g ,矫顽力为 45 2Oe的磁性微球 .微球的导电性随着微球中Fe3O4含量的增加而下降 .微球的磁性能则随着Fe3O4含量的增加而增大 .Fe3O4磁流体的粒径和磁性聚吡咯微球的粒径均在纳米量级 .纳米Fe3O4粒子能够提高复合物的热性能 .实验表明 ,磁流体和聚吡咯之间存在着一定的相互作用 ,正是这种相互作用使磁性聚吡咯纳米微球的热稳定性提高 .     

Fe3O4纳米晶的简单调控合成、表征及磁性能

采用醋酸铵作保护剂在200℃下制备了单分散的400 nm粒径的Fe3O4空心纳米球.通过改变实验条件,对产品的形貌、内部结构和粒径进行了调控合成,得到了粒径范围在100～200 nm的实心纳米球和片形结构的Fe3O4纳米材料.采用SEM、TEM和XRD等对样品进行了表征.结果表明,所得尖晶石型Fe3O4纳米晶粒径均匀,分散度好.利用振动样品磁场计检测了不同形貌样品的磁性能.结果显示,Fe3O4纳米空心球的饱和磁化强度和矫顽力均大于Fe3O4纳米片的对应值.     

原子转移自由基聚合法制备表面聚合物接枝四氧化三铁纳米粒子

为制备表面具有柔性高分子链的磁性微球,采用化学共沉淀法制备了具有超顺磁性的Fe3O4纳米微球,用KH550对Fe3O4纳米微球进行化学改性得到表面氨基化的Fe3O4纳米微球,与2-溴代异丁酰溴反应后制得含有引发官能团的Fe3O4纳米微球,随后将含溴的Fe3O4纳米微球与小分子单体与之通过原子转移自由基聚合(ATRP)法共聚。测试结果表明聚合物链成功地接枝到了Fe3O4纳米微球表面。     

SiO_2表面包覆对Fe_3O_4磁性微球性能的影响

采用化学共沉淀法制备Fe3O4磁性纳米粒子;用柠檬酸钠进行表面修饰得到在水相中稳定分散的Fe3O4溶胶。以Fe3O4磁性纳米粒子为种子,用碱催化正硅酸四乙酯水解、缩合制备了粒径和磁性可控的核壳结构的Fe3O4@SiO2复合微球。通过FT-IR,XRD,TEM,VSM和古埃磁天平对Fe3O4@SiO2复合微球进行表征。研究了SiO2包覆对Fe3O4@SiO2复合微球性能的影响。     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

单分散Fe_3O_4亚微米球的合成与表征

采用溶剂热法制备出具有尺寸可调、分散性好、亲水性和超顺磁性的亚微米Fe3O4磁球,并考察了不同表面活性剂、反应时间和反应温度的影响。分别采用XRD、FE-SEM、FTIR、超导量子干涉仪(SQUID)对其结构、形貌、表面性质及磁性进行了表征。结果表明,产物为立方结构、具有单分散性的Fe3O4亚微米球,粒径在140~360nm可调。所得Fe3O4亚微米球在室温条件下的磁滞回线表现出超顺磁性,矫顽力为零。不同表面活性剂对粒径大小和磁饱和强度有一定的影响,但对其形貌和晶相结构无影响。随着反应时间的延长和反应温度的提高,颗粒粒径有逐渐减小的趋势。     

锂离子电池负极材料ZnMn2O4微米空心球的制备和电化学性能

通过溶剂热方法合成了ZnMn2O4微米空心球,并探讨了其形成机理。采用XRD,SEM,TEM等测试手段对产物的结构、形貌和组成进行了表征。实验结果表明,溶剂热反应条件如反应温度、反应介质对于产物的结构和形貌起着关键作用。在140℃,采用乙醇和水作为反应介质,反应6 h可以制备出直径约3μm的ZnMn2O4微米空心球;当以乙醇为溶剂,反应6 h可以得到团聚的尺寸约250 nm的ZnMn2O4纳米颗粒。将所制备的ZnMn2O4微米空心球/纳米颗粒组装成锂扣式模拟电池,考察其电化学脱嵌锂性能。电化学测试结果显示,与ZnMn2O4纳米颗粒相比,空心结构的ZnMn2O4微米球具有较高的初始放电容量(1335 mAh·g-1)和较好的倍率性能,有望作为锂离子电池的新型负极材料。     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

磁性Fe3O4 /壳聚糖的化学修饰及包覆机理研究

Nano-sized Fe₃O₄ powder was prepared through an Oxygenation-Hydrothermal method. The chitosan magnetic complex was prepared by coating chitosan on the surface of Fe₃O₄ powders through Microlatex-Crosslinking Method. The product was characterized by IR， XRD， TEM， Vibrating Sample Magnetometer (VSM)， TG methods. Results show that the as-prepared powder is 25 nm in size and shows supermagnetism. The content of magnetite in microspheres is 37.8%. The mechanism for the coating reaction of chitosan to Fe₃O₄ nanoparticles is also suggested.     

表面活性剂碳化法合成Fe3O4/C复合物及其电化学性能

以水热法合成的包覆油酸的α-Fe₂O₃粒子为前驱体, 在氩气下500 °C煅烧1 h, 得到Fe₃O₄/C纳米复合物. 用傅里叶变换红外(FTIR)光谱, X射线衍射(XRD), 扫描电镜(SEM), X射线能量散射(EDX)谱, 高分辨透射电镜(HRTEM), 元素分析, 循环伏安(CV)和恒流充放电测试等方法对材料的结构、形貌、成分及电化学性能进行了表征. 结果表明: 所制备的Fe₃O₄/C复合物呈长约200 nm, 粗约100 nm的纺锤形, 表面碳层厚约1-2 nm, 碳含量为1.956%(质量分数); 这种复合物作为锂离子电池负极材料具有很好的循环稳定性(在0.2C (1C=928 mA·g^-1)循环80次后具有691.7 mAh·g^-1比容量)和倍率性能(在2C循环20次后依然有520 mAh·g^-1比容量). 相对于未包覆的商业Fe₃O₄粒子, 复合物显著提高的电化学性能是由于碳包覆能防止粒子聚集, 提高导电性以及稳定固体电解质界面(SEI)膜.     

新型球状磷酸铁锂的合成及电化学性能

在水热条件下,制备了水合碱式磷酸铁微球,500 oC焙烧后生成直径为5μm的碱式磷酸铁,接着与碳酸锂一起焙烧后生成了球形磷酸铁锂．我们的方法可以有效地控制所获得产物的尺寸和形貌,同时在产物表面形成均匀碳包覆,改善了磷酸铁锂的电化学性能．     

Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子的制备与性能

采用水热法合成了Fe3O4@SiO2@YF3∶Eu3+磁-光双功能复合粒子,对其结构和性能进行了表征。XRD分析表明:Fe3O4表面包覆上了结晶良好的正交晶系的YF3。TEM照片表明:复合粒子为球形,构成核的Fe3O4颗粒的尺寸在200～350 nm之间,Fe3O4@SiO2@YF3∶Eu3+核壳结构复合粒子的尺寸约为230～380 nm,与包覆前的Fe3O4相比较,包覆后,颗粒尺寸增大,并且YF3∶Eu3+是以棒状结构连接在Fe3O4球型颗粒的表面。磁性和荧光光谱分析表明:该复合颗粒同时具有良好的发光性和磁性,使其在生物医学领域具有潜在的应用。     

链霉亲和素-异硫氰酸荧光素偶联核壳型Fe_3O_4/Au纳米晶的合成及性质

采用改进的Polyol合成法,以PEO-PPO-PEO为表面活性剂制备了链霉亲和素-异硫氰酸荧光素偶联的Fe3O4/Au纳米粒子;利用透射电镜和X射线衍射仪分析证实了Fe3O4/Au的核壳型纳米结构,确定了其粒径和分布;采用紫外-可见吸收光谱仪和荧光光谱仪测定了所制备的纳米粒子的光学活性和荧光特性,并采用振动样品磁强计(VSM)测量了其磁化率.结果表明,所制备的Fe3O4/Au纳米粒子具有光学活性和荧光特性,以及优异的磁性.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

Ultrasmall water-soluble metal-iron oxide nanoparticles as T1-weighted contrast agents for magnetic resonance imaging

Using an improved hydrolysis method of inorganic salts assisted with water-bath incubation, ultrasmall water-soluble metal-iron oxide nanoparticles (including Fe(3)O(4), ZnFe(2)O(4) and NiFe(2)O(4) nanoparticles) were synthesized in aqueous solutions, which were used as T(1)-weighted contrast agents for magnetic resonance imaging (MRI). The morphology, structure, MRI relaxation properties and cytotoxicity of the as-prepared metal-iron oxide nanoparticles were characterized, respectively. The results showed that the average sizes of nanoparticles were about 4 nm, 4 nm and 5 nm for Fe(3)O(4), ZnFe(2)O(4) and NiFe(2)O(4) nanoparticles, respectively. Moreover, the nanoparticles have good water dispersibility and low cytotoxicity. The MRI test showed the strong T(1)-weighted, but the weak T(2)-weighted MRI performance of metal-iron oxide nanoparticles. The high T(1)-weighted MRI performance can be attributed to the ultrasmall size of metal-iron oxide nanoparticles. Therefore, the as-prepared metal-iron oxide nanoparticles with good water dispersibility and ultrasmall size can have potential applications as T(1)-weighted contrast agent materials for MRI.     

Controlled synthesis of different types iron oxides nanocrystals in paraffin oil

Monodisperse Fe3O4 and FeO nanocrystals (NCs) with different sizes (from 10 nm to 50 nm) and different shapes (cube, sphere, and ellipsoid) were synthesized by simply adjusting reaction temperature or molar ratio of Fe/oleic acid (OA) during the decomposition of FeO(OH) in noncoordinating solvent. The concentration of OA affected the nucleation and growth of NCs by improving the chemical reaction driving force during the syntheses of different types of iron oxide NCs. It has been found that the reaction temperature influenced the reaction activity between FeO(OH) and OA. The structure of Fe oleate complexes was studied using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy (TEM) were used for structural and chemical characterization of as-prepared iron oxide NCs.     

Ultrafast hydrothermal synthesis of high quality magnetic core phenol-formaldehyde shell composite microspheres using the microwave method

An ultrafast, facile, and efficient microwave hydrothermal approach was designed to fabricate magnetic Fe(3)O(4)/phenol-formaldehyde (PF) core-shell microspheres for the first time. The structure of the Fe(3)O(4)/PF core-shell microspheres could be well controlled by the in situ polycondensation of phenol and formaldehyde with magnetic Fe(3)O(4) clusters as the seeds in an aqueous solution without any surfactants. The effect of synthetic parameters, such as the feeding amounts of phenol, the dosages of formaldehyde, the reaction temperatures, and the microwave heating time, on the morphologies and sizes of the Fe(3)O(4)/PF microspheres were investigated in details. The phenol-formaldehyde shell is found to be evenly coated on Fe(3)O(4) clusters within 10 min of the irradiation. The as-prepared microspheres were highly uniform in morphology, and the method was found to allow the shell thickness to be finely controlled in the range of 10-200 nm. The properties of the composite microspheres were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermogravimetic analysis (TGA), Fourier transform infrared (FT-IR) spectra, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM). The as-prepared Fe(3)O(4)/PF microspheres were monodisperse and highly dispersible in water, ethanol, N,N-dimethyformamide, and acetone, a beneficial quality for the further functionalization and applications of the Fe(3)O(4)/PF microspheres.