超临界CO2萃取柚子种子油及脂肪酸的气相色谱分析

应用超临界CO2萃取技术萃取柚子种子油,并对种子油进行了气相色谱分析。研究了萃取压力、温度和时间对柚子种子油得率的影响。当萃取温度为45℃,萃取压力35 MPa,萃取时间150 min时,柚子种子油的提取率为44.58%。气相色谱分析表明,柚子种子油中主要含有各类不饱和脂肪酸,其中亚麻酸、亚油酸、油酸的相对含量分别为4.40%、34.56%和27.19%。通过对柚子种子油的分析,为其进一步开发利用提供科学依据。     

薤白挥发油成分的超临界CO2萃取及GC-MS分析

采取超临界CO2萃取和水蒸气蒸馏两种方法提取薤白中的挥发油,比较了两种提取方法得到的挥发油的理化性质,并利用GC-MS对它们进行了定性、定量分析。两种方法的主要提取物均为含硫化合物,但超临界CO2萃取法得到的含硫化合物的数量和质量都高于水蒸气蒸馏法得到的提取物。采用水蒸气蒸馏法提取8 h得到的萃取率为1.72%。通过设计的超临界CO2萃取的正交实验,得到了最佳萃取工艺条件为:压力25 MPa,温度40℃,CO2流量为25L/h。最佳萃取时间为120 min,萃取率为4.41%,是水蒸气蒸馏法萃取率的2.8倍。实验结果表明,超临界CO2萃取法简单易行,可以较快速、有效地提取薤白中的挥发油。     

栀子花挥发油超临界CO2萃取工艺优选分析

采用超临界CO2萃取法,使用正交试验设计方案,以提取率为指标,对萃取温度、萃取压力、分离压力和分离温度等影响因素进行考察。结果表明,超临界CO2萃取法萃取栀子花挥发油成分的最佳工艺条件为：萃取压力15mPa,萃取温度35℃,分离压力15mPa,分离温度25℃。该方法简便、可靠、选择性高,适于工业化生产。     

超临界CO_2萃取桑叶总黄酮工艺的研究

采用超临界CO2萃取桑叶总黄酮,以得率为指标,对萃取压力、萃取温度、夹带剂乙醇的浓度和流量等影响因素进行正交试验。结果表明最佳工艺条件为:萃取压力35 MPa,温度55℃,乙醇质量分数90%,乙醇流量0.01 mL/min。此条件下桑叶总黄酮得率2.28%。该方法简便、可靠、选择性高,适于工业化生产。     

白术挥发性成分的超临界流体萃取及其分析

采用超临界流体萃取白术挥发油成分,对萃取条件进行优化,并用气相色谱、气相色谱－质谱分析鉴定出超临界流体萃了的挥发油中22个化合物。最佳的超临界流体萃取条件为压力22.0MPa,温度60℃,0.5mL乙醇作改性,先静态萃取10min(CO2用量2.0mL),再动态萃取40min(CO2流速为0.3mL/min)。将超临界流体萃取与水蒸气蒸馏进行对比,水蒸气蒸馏5h的油收率仅为超临界流体萃取1h油收率的10.32%,证明超临界流体萃取替代传统萃取的必要性。     

超声强化超临界CO2萃取樟树叶精油的研究

采用超声波强化超临界CO2萃取樟树叶精油,并采用正交实验对萃取工艺进行了优化.研究结果表明:当萃取压力为16MPa、温度为50℃、时间为80min、CO2流量为16kg/h、超声波功率为240W、超声波频率为20KHz时,能获得比较好的效果,精油的平均提取率可达1.92％.GC-MS的分析结果表明:樟树叶精油中樟脑+β...     

超临界流体萃取-GC-MS分析西黄丸中挥发性成分

建立西黄丸中挥发油成分乙酸辛酯的含量测定方法,为西黄丸的质控标准提供依据。方法:超临界CO2萃取西黄丸中挥发油成分,采用气相色谱法测定乙酸辛酯含量;研究压力、温度、时间和粒度因素对挥发油得率与乙酸辛酯含量的影响,并进行了化学计量学分析。采用GC-MS分析了适宜条件的挥发油的成分。综合考虑挥发油得率和乙酸辛酯含量双指标,确定的西黄丸挥发油萃取条件为:粉碎粒度为80目,萃取压力为25 MPa,温度为40℃,时间为2 h。在此条件下,挥发油得率达到7.76%,乙酸辛酯含量达到0.72 mg·g^-1。通过指纹图谱、主成分分析(PCA)、正交偏最小二乘判别分析(OPLS-DA)化学计量学分析可知,不同萃取条件对所提取的挥发油物质组分及其含量没有显著性差异。GC-MS鉴定出的主要成分有(1S-endo)-2-甲基-3-亚甲基-2-(4-甲基-3--3-戊烯基)-二环[2.2.1庚烷、10α-羟基日本刺参萜、(±)-麝香酮、4-亚甲基-2,8,8-三甲基-2-乙烯基-双环[5.2.0]壬烷和2-甲基-4-(2,6,6-三甲基-1-环己烯-1-基)丁醛。结论:西黄丸挥发油成分适宜萃取条件,及建立的乙酸辛酯含量测定方法准确、可靠,为有效控制西黄丸质量,完善其质量标准及进一步的药效成分研究提供了科学依据。     

超临界二氧化碳萃取柿叶黄酮的工艺研究

本文研究了超临界流体萃取柿叶总黄酮苷类化合物的影响因素,并对生产工艺进行了优化设计。试验结果表明:萃取时压力、温度、时间、CO2流量对萃取率的影响程度依次递减。最佳工艺条件为:萃取压力30MPa、萃取温度50℃、萃取时间3h、CO2流量30kg·h-1。用超临界流体萃取法得到的柿叶总黄酮苷类化合物萃取物纯度高,无异味,色泽金黄。     

采用超临界CO_2萃取技术提取废次烟叶中的茄尼醇

采用超临界CO2萃取技术提取废次烟叶中的有效成分茄尼醇,以乙醇为夹带剂,研究了萃取压力、萃取温度、CO2的流量、萃取时间、夹带剂的使用、分离温度和原料粒度等方面对萃取效果的影响,并对其中影响较为显著的因素进行了正交试验,通过极差和方差分析确定了萃取体系适宜的工艺条件。萃取压力为20 MPa,萃取温度为45℃,CO2的流量为15 L/h,萃取时间为2 h,夹带剂为95%的乙醇,分离温度为40℃,原料粒度为40~60目。     

广藿香超临界CO_2萃取产物的GC-MS分析

采用超临界CO2 流体萃取技术从广藿香中提取出挥发油 ,挥发油得率为2.97 %(w)。采用GC -MS分离鉴定其化学组成 ,以面积归一化法测定其相对含量。从广藿香叶挥发油中鉴定出24个化合物 ,其中以广藿香醇 (48.8 % )、δ_愈创木烯 (15.2 % )、α_愈创木烯(15.3 %)等为主     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.