Conformational control of inorganic adhesion in a designer protein engineered for cuprous oxide binding

Combinatorial selection of peptides that bind technological materials has emerged as a valuable tool for room-temperature nucleation and assembly of complex nanostructured materials. At present, the parameters that control peptide-solid binding are poorly understood, but such knowledge is needed to build the next generation of hybrid materials. Here, we use a derivative of the DNA binding protein TraI engineered with a disulfide-bonded cuprous oxide binding sequence called CN225 to probe the influence of sequence composition and conformation on Cu2O binding affinity. We previously reported a statistically significant enrichment in paired arginines (RR) among a family of cuprous oxide binding peptides and hypothesized that this is a key motif for binding. However, systematic alanine (A) substitutions in the CN225 RR motif (creating RA, AR, and AA pairs) do not support the hypothesis that RR is critical for Cu2O binding by CN225. Instead, we find that the presentation of the peptide in a disulfide-constrained loop (i.e., the conformation present during combinatorial selection) is crucial for binding to the metal oxide. Our results suggest that caution should be exerted when extrapolating from statistical data and that, in some cases, conformation is more important than composition in determining peptide-inorganic adhesion.     

Cu2+-induced intermolecular static excimer formation of pyrenealkylamine

Synthesis of monopyrenylalkylamine derivative 1 and its fluorescence behavior for Cu2+ in H2O/CH3CN (1:1, v/v) were investigated. Upon Cu2+ binding, 1, bearing a sulfonamide group, exhibited a marked excimer emission at 455 nm along with a weak monomer emission at 375 nm. The excimer emission, driven by formation of an intermolecular pyrenyl static excimer upon Cu2+ binding to the sulfonamide group, is rationalized by experimental and theoretical DFT calculation results.     

Selected-control fabrication of multifunctional fluorescent-magnetic core-shell and yolk-shell hybrid nanostructures

The selected-control preparation of uniform core-shell and yolk-shell architectures, which combine the multiple functions of a superparamagnetic iron oxide (SPIO) core and europium-doped yttrium oxide (Y(2)O(3):Eu) shell in a single material with tunable fluorescence and magnetic properties, has been successfully achieved by controlling the heat-treatment conditions. Furthermore, the shell thickness and interior cavity of SPIO@Y(2)O(3):Eu core-shell and yolk-shell nanostructures can be precisely tuned. Importantly, as-prepared SPIO@Y(2)O(3):Eu yolk-shell nanocapsules (NCs) modified with amino groups as cancer-cell fluorescence imaging agents are also demonstrated. To the best of our knowledge, this is the first report on the selected-control fabrication of uniform SPIO@Y(2)O(3):Eu core-shell nanoparticles and yolk-shell NCs. The combined magnetic manipulation and optical monitoring of magnetic-fluorescent SPIO@Y(2)O(3):Eu yolk-shell NCs will open up many exciting opportunities in dual imaging for targeted delivery and thermal therapy.     

Redox chemistry of Cu colloids probed by adsorbed CO: an in situ attenuated total reflection Fourier transform infrared study

The IR spectroscopic investigation of both the adsorption of carbon monoxide and the interaction of oxygen and CO on the surface of copper colloids is described for the first time. The copper colloids were produced by pyrolysis of [Cu(OCH(Me)CH(2)NMe(2))(2)] in hot n-hexadecylamine. Upon contact to synthetic air Cu/Cu(x)O core-shell particles are formed. The treatment of these particles with CO results in the reestablishment of pure Cu(0) particles. These results demonstrate that small molecules penetrate the ligand shell of the nanoparticles and reversibly adsorb at the surface without affecting the particle morphology and size distribution.     

Fabrication of magnetic core@shell Fe oxide@Au nanoparticles for interfacial bioactivity and bio-separation

The immobilization of proteins on gold-coated magnetic nanoparticles and the subsequent recognition of the targeted proteins provide an effective means for the separation of proteins via application of a magnetic filed. A key challenge is the ability to fabricate such nanoparticles with the desired core-shell nanostructure. In this article, we report findings of the fabrication and characterization of gold-coated iron oxide (Fe2O3 and Fe3O4) core@shell nanoparticles (Fe oxide@Au) toward novel functional biomaterials. A hetero-interparticle coalescence strategy has been demonstrated for fabricating Fe oxide@Au nanoparticles that exhibit controllable sizes ranging from 5 to 100 nm and high monodispersity. Composition and surface analyses have proven that the resulting nanoparticles consist of the Fe2O3 core and the Au shell. The magnetically active Fe oxide core and thiolate-active Au shell were shown to be viable for exploiting the Au surface protein-binding reactivity for bioassay and the Fe oxide core magnetism for magnetic bioseparation. These findings are entirely new and could form the basis for fabricating magnetic nanoparticles as biomaterials with tunable size, magnetism, and surface binding properties.     

无皂乳液聚合法制备聚甲基丙烯酸甲酯包覆厚度可控的纳米核-壳二氧化硅微球

用改进的Stöber法和无皂乳液聚合法制备窄分布的二氧化硅/PMMA核-壳纳米微球. 用改进的Stöber法将3-乙氧基甲基丙烯酸丙基硅烷(MPS)修饰在纳米的二氧化硅表面后, 用无皂乳液聚合法制备核-壳纳米微球. 该法简单有效且得到厚度均匀的聚合物包覆层. 随着单体MMA用量的增加, 用动态光散射法测量, PMMA壳层的厚度从6.4 nm增加到96.3 nm. 热重分析表明, PMMA的含量从22.25%增加到93.41%. 扫描电子显微镜和透射电子显微镜结果表明, 得到的是包覆良好、表面光滑的核-壳无机/聚合物纳米微球.     

Inside-out core-shell architecture: controllable fabrication of Cu2O@Cu with high activity for the Sonogashira coupling reaction

Inside-out core-shell architectures (Cu(2)O@Cu) with a Cu(2)O core and a Cu shell, which are in contrast to the normally reported Cu(2)O-outside structure (Cu@Cu(2)O), were fabricated. This strategy can also be applied to construct square and hexapod Cu(2)O@Cu. The obtained Cu(2)O@Cu composite exhibits excellent catalytic activity for the Sonogashira coupling reactions.     

Exploring the first steps in core-shell electrocatalyst preparation: in situ characterization of the underpotential deposition of Cu on supported Au nanoparticles

The underpotential deposition (upd) of a Cu shell on a non-Pt nanoparticle core followed by galvanic displacement of the Cu template shell to form core-shell electrocatalyst materials is one means by which the Pt-based mass activity targets required for commercialization of PEM fuel cells may be reached. In situ EXAFS measurements were conducted at both the Au L(3) and the Cu K absorption edges during deposition of Cu onto a carbon-supported Au electrocatalyst to study the initial stages of formation of such a core-shell electrocatalyst. The Au L(3) EXAFS data obtained in 0.5 mol dm(-3) H(2)SO(4) show that the shape of the Au core is potential dependent, from a flattened to a round spherical shape as the Cu upd potential is approached. Following the addition of 2 mmol dm(-3) Cu, the structure was also measured as a function of the applied potential. At +0.2 V vs Hg/Hg(2)SO(4), the Cu(2+) species was found to be a hydrated octahedron. As the potential was made more negative, single-crystal studies predict an ordered bilayer of sulfate anions and partially discharged Cu ions, followed by a complete/uniform layer of Cu atoms. In contrast, the model obtained by fitting the Au L(3) and Cu K EXAFS data corresponds first to partially discharged Cu ions deposited at the defect sites in the outer shell of the Au nanoparticles at -0.42 V, followed by the growth of clusters of Cu atoms at -0.51 V. The absence of a uniform/complete Cu shell, even at the most negative potentials investigated, has implications for the structure, and the activity and/or stability, of the core-shell catalyst that would be subsequently formed following galvanic displacement of the Cu shell.     

Magnetite nanoparticles with tunable gold or silver shell

Fe3O4 nanoparticles with size approximately 13 nm have been prepared successfully in aqueous micellar medium at approximately 80 degrees C. To make Fe3O4 nanoparticles resistant to surface poisoning a new route is developed for coating Fe3O4 nanoparticles with noble metals such as gold or silver as shell. The shell thickness of the core-shell particles becomes tunable through the adjustment of the ratio of the constituents. Thus, the route yields well-defined core-shell structures of size from 18 to 30 nm with varying proportion of Fe3O4 to the noble metal precursor salts. These magnetic nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), FTIR, differential scanning calorimetry (DSC), Raman and temperature-dependent magnetic studies.     

Nanostructured Cu and Cu@Cu(2)O core shell catalysts for hydrogen generation from ammonia-borane

Copper nanoparticles have been prepared by the solvated metal atom dispersion (SMAD) method. Oxidation of the SMAD prepared copper colloids resulted in Cu@Cu(2)O core shell structures (7.7 +/- 1.8 nm) or Cu(2)O nanoparticles depending on the reaction conditions. The nano Cu, Cu@Cu(2)O core shell, and Cu(2)O particles were found to be catalytically active for the generation of hydrogen from ammonia-borane either via hydrolysis or methanolysis reaction.     

Microwave-assisted construction of ferromagnetic coordination polymers of [W(V)(CN)8]3- with Cu(II)-pyrazole synthons

The microwave-mediated self-assembly of [W(V)(CN)(8)](3-) with Cu(II) in the presence of pyrazole ligand resulted in the formation of three novel assemblies: Cu(II)(2)(Hpyr)(5)(H(2)O)[W(V)(CN)(8)](NO(3))·H(2)O (1), {Cu(II)(5)(Hpyr)(18)[W(V)(CN)(8)](4)}·[Cu(II)(Hpyr)(4)(H(2)O)(2)]·9H(2)O (2), and Cu(II)(4)(Hpyr)(10)(H(2)O)[W(V)(CN)(8)](2)(HCOO)(2)·4.5H(2)O (3) (Hpyr =1H-pyrazole). Single-crystal X-ray structure of 1 consists of cyanido-bridged 1-D chains of vertex-sharing squares topology. The structure of 2 reveals 2-D hybrid inorganic layer topology with large coordination spaces occupied by {Cu(Hpyr)(2)(H(2)O)(4)}(2+) ions. Compound 3 contains two types of cyanido-bridged 1-D chains of vertex-sharing squares linked together by formate ions in two directions forming hybrid inorganic-organic 3-D framework (I(1)O(2)). The magnetic measurements for 1-3 reveal a weak ferromagnetic coupling through Cu(II)-NC-W(V) bridges.     

Raman active jagged-shaped gold-coated magnetic particles as a novel multimodal nanoprobe

The creation of novel engineered multimodal nanoparticles (NPs) is a key focus in bionanotechnology and can lead to deep understanding of biological processes at the molecular level. Here, we present a multi-component system made of gold-coupled core-shell SPIONs, as a new nanoprobe with signal enhancement in surface Raman spectroscopy, due to its jagged-shaped gold shell coating.     

微波热解法制备Cu/Cu2O纳米材料

在二乙二醇溶剂体系中利用微波介电加热分解醋酸铜前体,进一步还原得到Cu2O和Cu纳米粒子以及Cu/Cu2O核壳结构。 采用X射线衍射、透射电子显微镜、扫描电子显微镜和紫外吸收光谱测试技术对产物的形貌、结构和组成进行了研究,结果表明,得到的Cu/Cu2O核壳结构直径为500 nm左右。 对比实验研究了不同聚合度乙二醇系列溶剂、反应时间以及表面活性剂或配位剂对产物形貌、组成的影响,表明低聚合度乙二醇和长的反应时间有利于醋酸铜还原形成铜。     

原子级壳层厚度Ru@Pt核壳结构纳米粒子的制备与表征

采用连续多元醇法,以RuCl₃·xH₂O和PtCl₂为前驱体,乙二醇为还原剂,聚乙烯吡咯烷酮为稳定剂的反应体系,并通过调节PtCl₂用量和还原温度成功制备了壳层厚度约为1.5个Pt原子层的单分散Ru@Pt核壳结构纳米粒子,利用透射电子显微镜(TEM)、X射线衍射仪(XRD)、X射线光电子能谱仪(XPS)等分析方法对其微观结构、粒径分布、晶型结构、物相组成进行了表征。 结果表明,该纳米粒子分布均匀且基本为球形,平均粒径约为3.57 nm,其中内核直径约为2.49 nm,外壳厚度约为0.55 nm,壳层金属Pt具有很好的晶型,Pt原子主要为{111}晶面,内核金属Ru与外壳金属Pt互相产生了电子效应使Pt的衍射峰和Ru、Pt的电子结合能产生了一定偏移,并初步研究了有效控制该核壳结构纳米粒子壳层厚度和增强核与壳两种金属之间电子效应的因素,使其有望在催化等领域发挥潜在的应用价值。     

Catalytic activity and regeneration property of a Pd nanoparticle encapsulated in a hollow porous carbon sphere for aerobic alcohol oxidation

A core-shell composite consisting of a palladium (Pd) nanoparticle and a hollow carbon shell (Pd@hmC) was employed as a catalyst for aerobic oxidation of various alcohols. The core-shell structure was synthesized by consecutive coatings of Pd nanoparticles with siliceous and carbon layers followed by removal of the intermediate siliceous layer. Structural characterizations using TEM and N(2) adsorption-desorption measurements revealed that Pd@hmC thus-obtained was composed of a Pd nanoparticle core of 3-6 nm in diameter and a hollow carbon shell with well-developed mesopore (ca. 2.5 nm in diameter) and micropore (ca. 0.4-0.8 nm in diameter) systems. When compared to some Pd-supported carbons, Pd@hmC showed a high level of catalytic activity for oxidation of benzyl alcohol into benzaldehyde using atmospheric pressure of O(2) as an oxidant. The Pd@hmC composite also exhibited a high level of catalytic activity for aerobic oxidations of other primary benzylic and allylic alcohols into corresponding aldehydes. The presence of a well-developed pore system in the lateral carbon shell enabled efficient diffusion of both substrates and products to reach the central Pd nanoparticles, leading to such high catalytic activities. This core-shell structure also provided high thermal stability of Pd nanoparticles toward coalescence and/or aggregation due to the physical isolation of each Pd nanoparticle from neighboring particles by the carbon shell: this specific property of Pd@hmC resulted in possible regeneration of catalytic activity for these aerobic oxidations by a high-temperature heat treatment of the sample recovered after catalytic reactions.     

Monodispersed core-shell Fe3O4@Au nanoparticles

The ability to synthesize and assemble monodispersed core-shell nanoparticles is important for exploring the unique properties of nanoscale core, shell, or their combinations in technological applications. This paper describes findings of an investigation of the synthesis and assembly of core (Fe(3)O(4))-shell (Au) nanoparticles with high monodispersity. Fe(3)O(4) nanoparticles of selected sizes were used as seeding materials for the reduction of gold precursors to produce gold-coated Fe(3)O(4) nanoparticles (Fe(3)O(4)@Au). Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, core-shell composition, surface reactivity, and magnetic properties have confirmed the formation of the core-shell nanostructure. The interfacial reactivity of a combination of ligand-exchanging and interparticle cross-linking was exploited for molecularly mediated thin film assembly of the core-shell nanoparticles. The SQUID data reveal a decrease in magnetization and blocking temperature and an increase in coercivity for Fe(3)O(4)@Au, reflecting the decreased coupling of the magnetic moments as a result of the increased interparticle spacing by both gold and capping shells. Implications of the findings to the design of interfacial reactivities via core-shell nanocomposites for magnetic, catalytic, and biological applications are also briefly discussed.     

芳族硝基化合物电还原中Cu-Ni合金的电极活性

本文采用共沉积法制备了以铜为基体的不同Ｃｕ／Ｎｉ比的Ｃｕ－Ｎｉ合金镀层,并用稳态极化法研究了这些镀层在使用硝基苯（ＮＢ）和１,５－二硝基蒽醌（１．５－ＤＮＡ）制备对氨基苯酚（ＰＡＰ）及１,５－二氨基－４,８－二羟基蒽醌（１,５－ＤＡ－４,８－ＤＨＡ）等电化学还原过程中的阴极活性．研究表明,在ＰＡＰ和１,５－ＤＡ－４,８－ＤＨＡ电合成体系中,不同Ｃｕ／Ｎｉ比的合金阴极具有不同的交换电流密度（ｉｏ）和表观活化能（ＥＡ）,其中以０．０５ｍｏｌ／ＬＣｕＳＯ４·５Ｈ２Ｏ＋０．６ｍｏｌ／ＬＮｉＳＯ４·６Ｈ２Ｏ＋０．２５ｍｏｌ／ＬＮａ３Ｃｉｔ·２Ｈ２Ｏ组成的镀液,并在控制电流密度为０．６Ａ·ｄｍ－２、ｐＨ值为６、体系温度为５０℃等工艺条件下镀制的Ｃｕ－Ｎｉ合金试片（ＣＮ－３０）,具有最大的ｉｏ和最小的ＥＡ值,与常规所用的Ｃｕ、Ｃｕ／Ｈｇ、蒙乃尔合金等阴极相比,ＣＮ－３０试片的电极性能最佳     

CeO2@Au核壳结构纳米粒子的合成与性质研究

采用沉淀法制备了球形CeO2纳米粒子,将其作为核粒子溶液,然后向其中滴加四氯合金酸溶液,在CeO2胶体表面利用柠檬酸钠还原[AuCl4]-离子,得到了CeO2@Au核壳结构纳米粒子。TEM分析表明,CeO2纳米粒子分散效果好,粒径为5 nm;CeO2@Au核壳粒子为球形,无团聚,平均粒径为15 nm。XRD分析表明,CeO2@Au核壳粒子为晶型结构,属于立方晶系,CeO2空间群为O5H-FM3M,Au的空间群为Fm-3m。UV-vis分析发现,CeO2@Au核壳粒子在300和520 nm处呈现出两个比较强的吸收峰,分别对应于CeO2胶体溶液的吸收峰和金粒子的表面等离子共振吸收峰。EDS分析了核壳结构CeO2@Au纳米粒子中存在Ce,O和Au 3种元素。XPS分析表明,Ce3d3/2和Au4f电子结合能与标准结合能相比发生了变化,说明CeO2与Au之间存在着相互作用。     

ZnO纳米管有序阵列与Cu2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究简

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析. 以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度. 结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

Hydration of gaseous copper dications probed by IR action spectroscopy

Clusters of Cu (2+)(H 2O) n , n = 6-12, formed by electrospray ionization, are investigated using infrared photodissociation spectroscopy, blackbody infrared radiative dissociation (BIRD), and density functional theory of select clusters. At 298 K, the BIRD rate constants increase with increasing cluster size for n >or= 8, but the trend reverses for the smaller clusters where Cu (2+)(H 2O) 6 is less stable than Cu (2+)(H 2O) 8. This trend in stability is consistent with a change in fragmentation pathway from loss of a water molecule for clusters with n >or= 9 to loss of hydrated protonated water clusters and the formation of the corresponding singly charged hydrated metal hydroxide for n 相似文献