Integrating Perovskite Solar Cells into a Flexible Fiber

Perovskite solar cells have triggered a rapid development of new photovoltaic devices because of high energy conversion efficiencies and their all‐solid‐state structures. To this end, they are particularly useful for various wearable and portable electronic devices. Perovskite solar cells with a flexible fiber structure were now prepared for the first time by continuously winding an aligned multiwalled carbon nanotube sheet electrode onto a fiber electrode; photoactive perovskite materials were incorporated in between them through a solution process. The fiber‐shaped perovskite solar cell exhibits an energy conversion efficiency of 3.3 %, which remained stable on bending. The perovskite solar cell fibers may be woven into electronic textiles for large‐scale application by well‐developed textile technologies.     

A Lightweight Polymer Solar Cell Textile that Functions when Illuminated from Either Side

An all‐solid‐state, lightweight, flexible, and wearable polymer solar cell (PSC) textile with reasonable photovoltaic performance has been developed. A metal textile electrode made from micrometer‐sized metal wires is used as the cathode, and the surfaces of the metal wires are dip‐coated with the photoactive layers. Two ultrathin, transparent, and aligned carbon nanotube sheets that exhibit remarkable electronic and mechanical properties were coated onto the modified metal textile at both sides as the anode to produce the desired PSC textile. Because of the designed sandwich structure, the PSC textile displays the same energy conversion efficiencies regardless of which side it is irradiated from. As expected, the PSC textiles are highly flexible, and their energy conversion efficiencies varied by less than 3 % after bending for more than 200 cycles. The PSC textile shows an areal density (5.9 mg cm^?2) that is lower than that of flexible film‐based PSCs (31.3 mg cm^?2).     

An All‐Solid‐State Fiber‐Shaped Aluminum–Air Battery with Flexibility,Stretchability, and High Electrochemical Performance

Owing to the high theoretical energy density of metal–air batteries, the aluminum–air battery has been proposed as a promising long‐term power supply for electronics. However, the available energy density from the aluminum–air battery is far from that anticipated and is limited by current electrode materials. Herein we described the creation of a new family of all‐solid‐state fiber‐shaped aluminum–air batteries with a specific capacity of 935 mAh g⁻¹ and an energy density of 1168 Wh kg⁻¹. The synthesis of an electrode composed of cross‐stacked aligned carbon‐nanotube/silver‐nanoparticle sheets contributes to the remarkable electrochemical performance. The fiber shape also provides the aluminum–air batteries with unique advantages; for example, they are flexible and stretchable and can be woven into a variety of textiles for large‐scale applications.     

An All‐Solid‐State Fiber‐Shaped Aluminum–Air Battery with Flexibility,Stretchability, and High Electrochemical Performance

Owing to the high theoretical energy density of metal–air batteries, the aluminum–air battery has been proposed as a promising long‐term power supply for electronics. However, the available energy density from the aluminum–air battery is far from that anticipated and is limited by current electrode materials. Herein we described the creation of a new family of all‐solid‐state fiber‐shaped aluminum–air batteries with a specific capacity of 935 mAh g^?1 and an energy density of 1168 Wh kg^?1. The synthesis of an electrode composed of cross‐stacked aligned carbon‐nanotube/silver‐nanoparticle sheets contributes to the remarkable electrochemical performance. The fiber shape also provides the aluminum–air batteries with unique advantages; for example, they are flexible and stretchable and can be woven into a variety of textiles for large‐scale applications.     

Textile‐Compatible Substrate Electrodes with Electrodeposited ZnO—A New Pathway to Textile‐Based Photovoltaics

A strategy is presented to realize textile‐based photovoltaic cells motivated by developments of textile‐based electronics and their demand of grid‐independent energy supply. Beyond this, a development of textile‐based photovoltaics also represents an attractive pathway towards very flexible and rugged solar cells. The need for compatibility of an appropriate photovoltaic technology with the physical limitations of textiles is stressed. Electrodeposition from aqueous solutions is presented as a successful strategy to realize semiconductor structures on textiles and detailed control and influence of the deposition conditions is discussed. The role of microelectrode effects, options of forced convection, deposition under pulsed potential, alternative deposition baths and different substrate metals are emphasized. An active electrode material is presented which reaches a conversion efficiency close to the 1 % limit under AM 1.5 illumination conditions and thereby opens the door for a further optimization towards devices of technical interest.     

An Ultraflexible Silicon–Oxygen Battery Fiber with High Energy Density

To satisfy the rapid development of portable and wearable electronics, it is highly desired to make batteries with both high energy densities and flexibility. Although some progress has been made in recent decades, the available batteries share critical problems of poor energy storage capacity and low flexibility. Herein, we have developed a silicon–oxygen battery fiber with high energy density and ultra‐high flexibility by designing a coaxial architecture with a lithiated silicon/carbon nanotube hybrid fiber as inner anode, a polymer gel as middle electrolyte and a bare carbon nanotube sheet as outer cathode. The fiber showed a high energy density of 512 Wh kg⁻¹ and could effectively work after bending for 20 000 cycles. These battery fibers have been further woven into flexible textiles for a large‐scale application.     

Room temperature polymerization of poly(3,4‐ethylenedioxythiophene) as transparent counter electrodes for dye‐sensitized solar cells

Poly(3,4‐ethylenedioxythiophene) (PEDOT) counter electrode is prepared with in situ polymerization of 3,4‐ethylenedioxythiophene on a fluorine‐doped tin oxide over‐layer glass at room temperature. The cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization are measured to evaluate the catalytic activity of PEDOT counter electrode for I₃^?/I^? redox couple. Comparing the data with that of traditional thermal decomposed Pt counter electrode, it is found that PEDOT has higher catalytic activity than that of Pt counterpart. Power conversion efficiency of the dye‐sensitized solar cell (DSC) with PEDOT counter electrode can attain to 7.713%, a little higher than that of the cell with Pt counter electrode (7.300%). Taking the advantage of high transparency of PEDOT counter electrode, an Ag mirror is put on the back side of PEDOT counter electrode of the DSC to reflect light back for power conversion. Power conversion efficiency of the DSC with this special structure can be further enhanced to 8.359%, which mainly stems from the improved short‐circuit current density by the increased irradiated light intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

烯碳纤维基能源器件的研究进展

纤维状能源器件的研究极大地推动了可穿戴电子设备的快速发展。烯碳纤维主要包括碳纳米管纤维和石墨烯纤维,其微观组成单元具有独特的碳碳共轭分子形态,宏观结构具有高度可调控性,表现出高的比强度、优良的导电性和导热性、以及良好的机械柔韧性等,被广泛应用于先进能源器件的研究和开发,有效促进了柔性可穿戴电子器件的发展。本文综述了烯碳纤维基能源器件包括能量转换和储能器件等的研究和应用进展,具体介绍了烯碳纤维基太阳能电池、湿气发电机、热电发电机、超级电容器以及电化学电池等的最新成果,重点讨论了烯碳纤维基能源器件的制备方法和可穿戴应用,分析了烯碳纤维基储能及能量转换器件面临的问题和挑战,期望能够为未来高性能纤维基可穿戴能源器件的发展提供有价值的研究思路。     

Integrated Devices to Realize Energy Conversion and Storage Simultaneously

Other forms of energy are generally converted to electric energy and then transported to electrochemical devices, where the energy is stored, by external electric wires. To further improve total energy conversion and storage efficiency, interest in simultaneously realize the energy conversion and storage in a single device has increased. This Concept describes recent progress in developing such novel integrated energy devices. Both planar and wire architectures are carefully illustrated with an emphasis on the “energy wire” which has been the focus of past developments due to its unique and promising applications, such as being woven into clothes or other complex structures by conventional textile technology. The current challenges and future directions of the integrated devices, particularly in the wire architecture, are summarized.     

Flexible,Stretchable, and Rechargeable Fiber‐Shaped Zinc–Air Battery Based on Cross‐Stacked Carbon Nanotube Sheets

The fabrication of flexible, stretchable and rechargeable devices with a high energy density is critical for next‐generation electronics. Herein, fiber‐shaped Zn–air batteries, are realized for the first time by designing aligned, cross‐stacked and porous carbon nanotube sheets simultaneously that behave as a gas diffusion layer, a catalyst layer, and a current collector. The combined remarkable electronic and mechanical properties of the aligned carbon nanotube sheets endow good electrochemical properties. They display excellent discharge and charge performances at a high current density of 2 A g⁻¹. They are also flexible and stretchable, which is particularly promising to power portable and wearable electronic devices.     

A Twisted Wire‐Shaped Dual‐Function Energy Device for Photoelectric Conversion and Electrochemical Storage

A wire‐shaped energy device that can perform photoelectric conversion and electrochemical storage was developed through a simple but effective twisting process. The energy wire exhibited a high energy conversion efficiency of 6.58 % and specific capacitance of 85.03 μF cm^?1 or 2.13 mF cm^?2, and the two functions were alternately realized without sacrificing either performance.     

Synthesis and characterization of a microsphere‐based coating for textiles with potential as an in situ bioactive delivery system

Proteinaceous microspheres have a wide range of biomedical applications, including their use as drug delivery systems. On the other hand, bioactive and antimicrobial textiles are promising substrates for medical care, in particular, as wound‐dressings. This work relates the development of a new process for the functionalization of textiles through the simultaneous formation and linkage of protein‐based microspheres onto textile fibers by sonochemical techniques. The microspheres developed by this process possess antimicrobial properties by themselves, but other may be incorporated by the encapsulation of various pharmaceutical formulations. This new type of microspheres and particularly their fixation onto textile materials encourage the development of textiles that can be used as delivery systems in a simple, fast, and non‐toxic process. Here it is reported the production of microspheres with a combination of bovine serum albumin (BSA), L ‐Cysteine (L ‐Cys), and n‐dodecane, using the ultrasound technology. The size distribution and morphology of the microspheres was determined as a function of several parameters such as irradiation time and BSA and L ‐Cys concentrations. The produced microspheres were analyzed using a laser light scattering size analyzer, an optical microscope and a scanning electron microscope. The new coating of BSA + L ‐Cys microspheres revealed a high stability and excellent antibacterial properties being a promising alternative to design textile‐based bioactive delivery systems with potential application in the development of textile‐based wound‐dressings. Copyright © 2011 John Wiley & Sons, Ltd.     

High‐Performance Lithium–Air Battery with a Coaxial‐Fiber Architecture

The lithium–air battery has been proposed as the next‐generation energy‐storage device with a much higher energy density compared with the conventional lithium‐ion battery. However, lithium–air batteries currently suffer enormous problems including parasitic reactions, low recyclability in air, degradation, and leakage of liquid electrolyte. Besides, they are designed into a rigid bulk structure that cannot meet the flexible requirement in the modern electronics. Herein, for the first time, a new family of fiber‐shaped lithium–air batteries with high electrochemical performances and flexibility has been developed. The battery exhibited a discharge capacity of 12 470 mAh g^?1 and could stably work for 100 cycles in air; its electrochemical performances were well maintained under bending and after bending. It was also wearable and formed flexible power textiles for various electronic devices.     

Self‐reinforced polypropylene composites based on low‐cost commercial woven and non‐woven fabrics

In the present paper, different self‐reinforced polypropylene (PP) composites based on low‐cost commercial woven (w) and non‐woven (nw) fabrics were obtained. Hot compaction (HC) and film stacking (FS) followed by compression molding were used to prepared the composites. The fracture and failure behavior of the different materials was determined under different testing conditions through quasi‐static uniaxial tensile tests, Izod impact experiments and by means of fracture mechanics tests on mode I double‐edge deeply notched tensile specimens. In the case of the composite obtained by film stacking + compression molding (rPP/nw/w‐FS) and the hot‐compacted composite (nw/w‐HC) containing simultaneously woven and non‐woven fabrics, the acoustic emission technique was applied in situ in the tensile tests to determine their consolidation quality and to identify the failure mechanisms responsible for their fracture behavior. It was observed that both composites exhibited relatively similar high consolidation quality. However, the hot‐compacted composite presented a more uniform distribution of failure mechanisms (debonding and fiber fracture) than the film‐stacked composite. The hot‐compacted composite containing both types of reinforcements exhibited the best combination of mechanical (tensile, impact, and fracture) properties. Therefore, this composite appeared as the most promising for structural applications among the different composites investigated.     

Toward a comprehensive understanding of textiles functionalized with silver nanoparticles

This article provides a comprehensive understanding of development of textiles functionalized with silver nanoparticles (AgNPs). There are three established methods to fabricate textiles functionalized with AgNPs, namely, solution‐immersion, layer‐by‐layer deposition, and sonochemical. In addition, several textile types such as cotton, wool, polyester, silk, cotton/polyester blend, polyamide, and regenerated cellulose have been used for the fabrication. The AgNP deposition mechanism on textiles is mainly due to electrostatic interaction between AgNPs and textile constituents. It was exhibited that the deposition of AgNPs on textiles can transform their textiles colors. In addition, it was demonstrated that the deposition of AgNPs on textiles is not permanent, particularly against washing treatment. Textiles modified with AgNPs have several promising applications such as antibacterial, antifungal, catalyst, electronic devices, water treatment, sun protection, air treatment, and surface‐enhanced Raman scattering, which are comprehensively discussed in this article. Future challenges in fabricating textiles functionalized with AgNPs remain on how this can be carried out to improve long‐term stabilization of AgNPs on textiles to achieve their permanent deposition by employing greener approaches.     

In vitro biocompatibility of three‐dimensional chitosan scaffolds immobilized with chondroitin‐6‐sulfate

Cellular‐compatible scaffolds were prepared using a three‐dimensional micro‐porous chitosan (CS) non‐woven fabric immobilized by glutaraldehyde (GA), followed by the immobilization of chondroitin‐6‐sulfate (ChS). To characterize the immobilizing process, tensile analysis, and scanning electron microscopy (SEM) were performed. The cell seeding efficiency and proliferation test were evaluated using L929 fibroblasts. The chitosan scaffolds showed high water vapor transmission rate and antibacterial activity. In addition, ChS‐immobilized scaffolds exhibited higher cell seeding efficiency and fibroblasts proliferation. These results demonstrated that the CS non‐woven fabrics grafted with GA and immobilized with ChS could be an appropriate candidate for wound healing and artificial scaffolds in the clinical applications. Copyright © 2007 John Wiley & Sons, Ltd.     

A novel catalyst of WO2 nanorod for the counter electrode of dye-sensitized solar cells

Tungsten dioxide (WO(2)) nanorods were synthesized, which showed excellent catalytic activity for the reduction of triiodide to iodide. The dye-sensitized solar cell (DSC) using WO(2) as a counter electrode (CE) reached a high energy conversion efficiency of 7.25%, which can match the performance of the DSC based on a Pt CE.     

A Smart Flexible Zinc Battery with Cooling Recovery Ability

Flexible batteries are essential for wearable electronic devices. To meet practical applications, they need to be mechanically robust and stable. However, strong or multiple bending may sever the interfacial contact between electrode and electrolyte, causing capacity fading or even battery failure. Herein we present a new cooling‐recovery concept for flexible batteries, which involves a temperature‐sensitive sol–gel transition behavior of the thermoreversible polymer hydrogel electrolyte. Once a battery has suffered from strong mechanical stresses, a simple cooling process can refresh the electrode–electrolyte interface. The energy‐storage capability can be recovered with a healing efficiency higher than 98 %. It is believed that this study not only offers new valuable insights, but also opens up new perspectives to develop functional wearable devices.     

Effect of the thickness of the Pt film coated on a counter electrode on the performance of a dye-sensitized solar cell

The effects of the thickness and morphology of a Pt film coated on a counter electrode on the performance of a dye-sensitized solar cell (DSC) were investigated. Deposition of a Pt film ranging in thickness from 2 to 415 nm gradually decreases the sheet resistance of the counter electrode. No significant difference in the charge-transfer resistance at the electrolyte|counter electrode interface was observed for a Pt film thickness ranging from 25 to 415 nm. A high energy conversion efficiency of approximately 5% can be obtained for DSCs based on a counter electrode with a very thin Pt film of 2 nm, as well as with a 415-nm thick Pt film. These results are important for reducing production costs by reducing the required amount of expensive platinum.     

Current advancements on charge selective contact interfacial layers and electrodes in flexible hybrid perovskite photovoltaics

Perovskite-based photovoltaic materials have been attracting attention for their strikingly improved performance at converting sunlight into electricity.The beneficial and unique optoelectronic characteristics of perovskite structures enable researchers to achieve an incredibly remarkable power conversion efficiency.Flexible hybrid perovskite photovoltaics promise emerging applications in a myriad of optoelectronic and wearable/portable device applications owing to their inherent intriguing physicochemical and photophysical properties which enabled researchers to take forward advanced research in this growing field.Flexible perovskite photovoltaics have attracted significant attention owing to their fascinating material properties with combined merits of high efficiency,light-weight,flexibility,semitransparency,compatibility towards roll-to-roll printing,and large-area mass-scale production.Flexible perovskite-based solar cells comprise of 4 key components that include a flexible substrate,semi-transparent bottom contact electrode,perovskite(light absorber layer)and charge transport(electron/hole)layers and top(usually metal)electrode.Among these components,interfacial layers and contact electrodes play a pivotal role in influencing the overall photovoltaic performance.In this comprehensive review article,we focus on the current developments and latest progress achieved in perovskite photovoltaics concerning the charge selective transport layers/electrodes toward the fabrication of highly stable,efficient flexible devices.As a concluding remark,we briefly summarize the highlights of the review article and make recommendations for future outlook and investigation with perspectives on the perovskite-based optoelectronic functional devices that can be potentially utilized in smart wearable and portable devices.