取代基对依布硒啉电子结构及光谱性质影响的理论研究

采用密度泛函理论B3LYP方法在6-311++G**水平对依布硒啉及其6个衍生物进行结构优化,并分析了取代基对分子几何构型、电荷分布、前线轨道能级分布的影响.在相同计算水平上采用含时密度泛函理论方法进行了电子光谱研究,讨论了取代基对电子光谱的影响.计算结果表明,标题化合物分子为非平面结构,苯并异硒唑酮环与苯环之间存在一...     

靛蓝及其取代物的密度泛函理论研究

运用量子化学中密度泛函理论(DFT)方法，在B3LYP／6-31G^ 水平上对靛蓝及其芳环4，4′-，5，5′-，6，6′-，7，7′-取代衍生物进行理论计算．探讨了F，Cl，Br，NO2，CH3O，CH3在不同位置的取代对分子的几何构型、电子结构和电子光谱的影响，获得与实验结果相一致的结论．还用含时密度泛函理论(TD-DFT)方法在相同水平计算其电子光谱．结果表明靛蓝及其芳环取代衍生物的最低激发单重态(S1)均源自HOMO-LUMO(π-π^*)跃迁．     

苯和苯胺类硝基衍生物的红外光谱和热力学性质的理论研究

用量子化学密度泛函理论方法,在B3LYP/6-31G*水平下,对苯和苯胺类硝基衍生物进行了几何构型全优化和电子结构计算。通过振动分析,求得它们的红外光谱并作归属。将理论计算IR谱与已知实验结果进行比较,表明本文所提供的计算结果是可靠的。对谐振频率以0.96进行标度后基于统计热力学原理求得它们的热力学性质,探讨了热力学性质随硝基数、氨基数和温度变化的规律,发现有很好的线性关系,体现了很好的基团加和性。     

六硝基芪衍生物的红外光谱和热力学性质的理论研究

用量子化学密度泛函理论方法,在B3LYP/6-31G*水平下,对六硝基芪衍生物进行了几何构型全优化和电子结构计算。通过振动分析,求得它们的红外光谱并作归属。将理论计算IR谱与已知实验结果进行比较,表明本文所提供的计算结果是可靠的。对谐振频率以0.96进行标度后基于统计热力学原理求得它们的热力学性质,探讨了热力学性质随硝基数、氨基数、羟基数和温度变化的规律,发现有很好的线性关系,体现了很好的基团加和性。     

苯并二呋喃酮类染料及其取代物的密度泛函理论研究

采用密度泛函理论(DFT)方法,在B3LYP/6-31G*的水平上对苯并二呋喃酮类染料及其芳环6,6’-,9,9’-,10,10’-,11,11’-,12,12’-,13,13’-取代衍生物进行理论计算,讨论了CH3、OCH3、Cl、NO2在不同位置取代对分子的几何结构、电子结构和能量的影响。同时采用含时的密度泛函理论(TD-DFT)方法在相同水平下计算其电子光谱。结果表明:母体被取代后能量降低,结构变稳定;苯并二呋喃酮类染料及其芳环取代物的最低单重激发态均主要源自HOMO-LOMO(π-π*)跃迁。     

共轭性对7-吡啶吲哚类衍生物的结构与电子光谱性质的影响

运用密度泛函理论(DFT)方法对7-吡啶吲哚衍生物的结构及电子光谱性质进行了理论研究.在B3LYP/6-31G(d)水平上得到了7-吡啶吲哚(M)以及5种共轭衍生物(a-e)的几何构型、电子布局以及前线分子轨道;应用含时密度泛函理论(TD-DFT)在B3LYP/6-31+G(d)水平上计算了5种衍生物的电子光谱性质.结果表明,共轭体系的π键成分增大,能级差减小,激发能降低,分子的最大激发波长向长波方向移动,即发生红移.但是,如果分子中的空间位阻增大,则共轭程度降低,发生蓝移.前线分子轨道分析表明该类化合物吸收光谱主要对应分子中的HOMO→LUMO电子跃迁,且为π-π*跃迁.为新型含吲哚基团的光电功能材料的设计合成提供了理论参考.     

硝酸甲酯分子间相互作用的DFT和ab initio比较

用密度泛函理论(DFT)和从头算(ab initio)方法,分别在B3LYP/6 31G和HF/6 31G水平上求得硝酸甲酯三种二聚体的全优化几何构型和电子结构,并用6 311G和6 311＋＋G基组进行总能量计算.对HF/6 31G计算结果进行MP4SDTQ电子相关校正.在各基组下均进行基组叠加误差(BSSE)和零点能(ZPE)校正求得结合能.对6 31G优化构型作振动分析并基于统计热力学求得200～600 K温度下单体和二聚体的热力学性质.详细比较两种方法的相应计算结果,发现DFT求得的分子间距离较短,分子内键长较长,所得结合能均小于相应ab initio计算值.     

高能量密度化合物六硝基六氮杂三环十四烷并双氧化呋咱的理论研究

在DFT-B3LYP/6-31G**水平上，对最近新合成的高能量密度化合物六硝基六氮杂三环十四烷并双氧化呋咱（HHTTD）的分子几何，电子结构，红外振动光谱以及热力学性质进行了理论研究。根据计算结果可知，其全优化几何构型可取α, β, γ和δ四种构象，校正后的计算频率与已有实验值符合。根据分子总能量和前线轨道能隙对几种构象的稳定性进行了分析。此外，基于理论计算密度和生成热，运用Kamlet-Jacobs方程估算了标题物的爆速和爆压，结果表明标题物四种构象的爆速和爆压分别达到10 km/s和45 GPa。表明标题物可作为潜在的高能量密度材料(HEDM)，具有较高的研究开发价值和广阔的应用前景。本文为寻求新型呋咱及氧化呋咱类HEDM提供了丰富信息和指导。     

7-吡啶吲哚同分异体结构与电子光谱性质的理论研究

运用密度泛函理论对7-吡啶吲哚可能存在的构型进行优化,计算异构体的几何构型、电子结构、前线分子轨道;应用含时密度泛函理论计算了异构体b,c和e的电子光谱性质以及溶剂效应对光谱性质的影响.结果表明,溶剂极性的增加使b的电子光谱蓝移,而c和e的电子光谱红移,且溶剂极性对最大吸收波长影响幅度较小.前线分子轨道分析,表明该类化合物的主要吸收光谱主要对应于分子中的HOMO→LUMO电子跃迁,且为π→π*跃迁.     

ClnAlNHn和HnAlNHn(n=1～3)的振动光谱与化学键性质的研究

用从头计算分子轨道法和密度泛函理论，在ＨＦ／６－３１Ｇ＊和Ｂ３ＬＹＰ／６－３１Ｇ＊水平上对ＣｌｎＡｌＮＨｎ和ＨａＡｌＮＨｎ（ｎ＝１～３）及其碎片分子的几何构型、电子结构、振动光谱和化学热力学性质进行了理论研究。结果表明，优化几何参数与实验值相。ＣｌＡｌＮＨ２和Ｈ２ＡｌＮＨ２分子中，Ａｌ－Ｎ键为由一个σ键和一个π键组成的双重键，旋转势垒分别为３４．１０和５４．３５ＫＪ．ｍｏｌ＾－１，而Ｃｌ３ＡｌＮＨ     

二氨基二硝基乙烯结构和性质的理论研究

对三种二氨基二硝基乙烯同分异构体进行了HF/6-31G^*^*水平、DFT-B3LYP/6-31G^*^*水平的几何全优化以及MP2/6-31G^*^*//HF-6-31G^*^*水平的总能量计算。结果表明,1,1-二氨基-2,2-二硝基乙烯(Ⅰ)总能量比顺式(Ⅱ)和反式(Ⅲ)1,2-二氨基-1,2-二硝基乙烯的总能量低,即热力学稳定性次序为Ⅰ>Ⅲ>Ⅱ。分子的共轭性和分子内氢键的强度次序为Ⅰ≈Ⅲ>Ⅱ,前沿轨道能级差次序为Ⅰ>Ⅱ>Ⅲ,也均表明(Ⅰ)最稳定。此外还计算研究了标题物的红外光谱;化合物Ⅰ的理论计算与实验值良好相符。在此基础上计算研究了标题物的热力学性质。     

Synthesis, characterization, crystal structure and DFT studies on 1-acetyl-3-(2,4-dichloro-5-fluoro-phenyl)-5-phenyl-pyrazoline

The title compound, 1-acetyl-3-(2,4-dichloro-5-fluoro-phenyl)-5-phenyl-pyrazoline, has been synthesized and characterized by elemental analysis, IR, UV-vis and X-ray single crystal diffraction. Density functional (DFT) calculations have been carried out for the title compound by using B3LYP method at 6-31G* basis set. The calculated results show that the predicted geometry can well reproduce the structural parameters. Predicted vibrational frequencies have been assigned and compared with experimental IR spectra and they are supported each other. The theoretical electronic absorption spectra have been calculated by using TD-DFT method. Molecular orbital coefficients analyses suggest that the above electronic transitions are mainly assigned to n-->pi* and pi-->pi* electronic transitions. On the basis of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated, revealing the correlations between C(p,m)(0),S(m)(0),H(m)(0) and temperatures.     

Vibrational spectroscopy (FT-IR and FT-Raman) investigation, and hybrid computational (HF and DFT) analysis on the structure of 2,3-naphthalenediol

The FT-IR and FT-Raman vibrational spectra of 2,3-naphthalenediol (C(10)H(8)O(2)) have been recorded using Bruker IFS 66V spectrometer in the range of 4000-100 cm(-1) in solid phase. A detailed vibrational spectral analysis has been carried out and the assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The optimized molecular geometry and vibrational frequencies in the ground state are calculated by using the ab initio Hartree-Fock (HF) and DFT (LSDA and B3LYP) methods with 6-31+G(d,p) and 6-311+G(d,p) basis sets. There are three conformers, C1, C2 and C3 for this molecule. The computational results diagnose the most stable conformer of title molecule as the C1 form. The isotropic computational analysis showed good agreement with the experimental observations. Comparison of the fundamental vibrational frequencies with calculated results by HF and DFT methods. Comparison of the simulated spectra provides important information about the capability of computational method to describe the vibrational modes. A study on the electronic properties, such as absorption wavelengths, excitation energy, dipole moment and Frontier molecular orbital energies, are performed by time dependent DFT approach. The electronic structure and the assignment of the absorption bands in the electronic spectra of steady compounds are discussed. The calculated HOMO and LUMO energies show that charge transfer occurs within the molecule. On the basis of the thermodynamic properties of the title compound at different temperatures have been calculated. The statistical thermodynamic properties (standard heat capacities, standard entropies, and standard enthalpy changes) and their correlations with temperature have been obtained from the theoretical vibrations.     

六硝基六氮杂异伍兹烷结构和性质的理论研究

用abinitio和DFT方法,分别在HF/6-31G^*和B3LYP/6-31G^*水平下全优化计算了高能量密度材料六硝基六氮杂异伍兹烷(HNIW)的α(γ),β和ε型构象的分子几何构型、电子结构、IR谱和298～1000K温度下的热力学性质,细致分析比较了两种方法和相关的实验结果。理论计算几何参数与实验值相一致。分子中N—N键较长,N—N键Mulliken集居数较小,预示该键为热解和起爆的引发键。所得的IR谱形符合实验、指纹区频率与实验的平均绝对差值小于45cm^-1。由前线MO能级及其差值预示的热力学稳定性次序[ε＞α(γ)＞β]与实验排序相吻合。     

Density Functional Calculations on a Double Hydrogen-bonded Dimer

Density functional theory (DFT) calculations on a double hydrogen-bonded dimer of o-hydroxybenzoic acid were carried out at the B3LYP/6-31G^* level. The optimized geometry of the dimer closely resembles that of the crystal. The calculated results show that the total energy of the dimer is much lower than the sum energies of the two monomers, and the average strength of the double hydrogen bonds is about 38.37 kJ/mol. In order to probe the origin of the interactions in the dimer, natural bond orbital analyses were performed. The thermodynamic properties of the title compound at different temperatures have also been calculated on the basis of vibrational analyses and ΔGT, the change of Gibbs free energy for the aggregation from monomer to the dimmer, is 26.47 kJ/mol at 298.15 K and 0.1MPa, implying the spontaneous process of forming the dimer. The correlation graphics of Sm^0 Hm^0 and temperatures is depicted.     

Structures and Properties of 1,2,3-Triazoles and 1,2,4-Triazoles

1 INTRODUCTION In the energetic material field, extensive attention was paid to insensitive compounds possessing not only high energetic density but also good stability. Previous studies[1] have shown that some small mo- lecular compounds such as azoles are good candi- dates for excellent explosives. For example, explo- sives containing triazole rings have the advantages of less molecular weight, high nitrogen content and density, good thermal stability, low impact sensiti- vity and large …     

Theoretical study of the structures and properties of cyclic nitramines: Tetranitrotetraazadecalin (TNAD) and its isomers

Density Functional Theory (DFT) was employed to study the geometries, electronic structures, infrared vibrational spectra, and thermodynamic properties of seven isomeric cyclic nitramines of C₆H₁₀N₈O₈ (i.e., TNAD and its six isomers) at the B3LYP/6‐31G* level of theory. The experimental results available for TNAD were used to determine the reliability of the DFT method for generating structural and IR spectroscopic values for these molecular systems. The relative stabilities of the conformers were evaluated from the energy differences of the structures. Detonation properties of various conformers were evaluated using the Kamlet‐Jacobs equations, and it was found that all the calculated results are comparable to the available experimental data. In addition, the calculated results demonstrate that all title compounds can be used as excellent propellant ingredients. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Spectroscopic, quantum chemical DFT/HF study and synthesis of [2.2.1] hept-2'-en-2'-amino-N-azatricyclo [3.2.1.0(2,4)] octane

The compound 4-N-bicyclo [2.2.1] hept-2'-en-2'-amino-N-azatricyclo [3.2.1.0(2,4)] octane (2) has been synthesized and characterized by elemental analysis, IR, UV-vis, mass and NMR. Density functional theory (DFT) and Hartree-Fock (HF) calculations have been carried out for the title compound by using the standard 6-31G* basis set. The calculated results show that the predicted geometry can well reproduce the structural parameters. Predicted vibrational frequencies have been assigned and compared with experimental IR spectra and they complement each other. The theoretical electronic absorption spectra have been calculated by using CIS, TD-DFT and ZINDO methods. The (13)C NMR and (1)H NMR of compound (2) have been calculated by means of Becke 3-Lee-Yang-Parr (B3LYP) density functional method with 6-31G* basis set. Comparison between the experimental and the theoretical results indicates that density functional B3LYP method is able to provide satisfactory results for predicting NMR properties. On the basis of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated.     

Ab initio and semiempirical computational studies on 1‐{(2E)‐2‐[(aminocarbonothioyl)hydrazono]‐2‐(3‐mesityl‐3‐methylcyclobutyl)ethyl}‐pyrrolidine‐2,5‐dione

The molecular geometry, vibrational frequencies, and gauge including atomic orbital (GIAO) ¹H‐ and ¹³C NMR chemical shift values of the title compound in the ground state have been calculated using the Hartree‐Fock (HF) and density functional theory (DFT) methods with 6‐31G(d) basis sets, and compared with the experimental data. The calculated results show that the optimized geometries can well reproduce the crystal structural parameters and the theoretical vibrational frequencies, and ¹H‐ and ¹³C NMR chemical shift values show good agreement with experimental data. To determine conformational flexibility, the molecular energy profile of the title compound was obtained by semiempirical (AM1) calculations with respect to the selected torsion angle, which was varied from ?180° to +180° in steps of 10°. The energetic behavior of the title compound in solvent media was examined using the B3LYP method with the 6‐31G(d) basis set by applying the Onsager and the polarizable continuum model (PCM). The results obtained with these methods reveal that the PCM method provided more stable structure than Qnsager's method. By using TD‐DFT method, electronic absorption spectra of the title compound have been predicted and a good agreement with the TD‐DFT method and the experimental one is determined. The predicted nonlinear optical properties of the title compound are much greater than ones of urea. In addition, the molecular electrostatic potential (MEP), frontier molecular orbitals (FMO) analysis, NBO analysis and thermodynamic properties of the title compound were investigated using theoretical calculations. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Theoretical and Experimental Study on 3-Phenyl-5-Phenylazo-3H-[1,3,4] Thiadiazole-2-Thione

3-Phenyl-5-phenylazo-3H-[1,3,4] thiadiazole-2-thione has been synthesized and characterized by X-ray diffraction and FTIR spectra. An extended MO calculation using density functional theory (DFT) at B3LYP/6-31g* level has been carried out. The results of the calculations were compared with experimental data and they are found to support each other. The thermodynamic properties of the title compound at different temperatures also have been calculated on the basis of vibration analyses.