辛醇改性纳米二氧化硅表面的研究

纳米粒子由于粒径小,所以具有很高的比表面积,表面原子处于高度活化状态,使得表面能很高,粒子易于团聚,填充未经表面处理的纳米粒子,不但起不到特殊作用,反而会成为复合材料的力学弱点。所以要对纳米粒子进行表面改性,提高分散性,增加纳米粒子与聚合物间的界面结合力。用醇类对许多粉体进行酯化反应是常用的表面改性方法。金属氧化物与醇的反应是酯化反应[1]。酯化反应修饰法对于表面为弱酸性和中性的纳米粒子最为有效,例如SiO2等。醇的羟基与SiO2的表面羟基发生反应脱掉一分子水,达到表面接枝的目的。方程式为:这样R基团接枝到SiO2的表面,由于R基团是亲油性的,从而增加了极性的SiO2纳米粒子与有机物的润湿性。为了推动反应正向进行,关键在于及时将产生的水份引出反应体系。目前国内外用醇对纳米粒子进行表面改性主要采用常规回流法和高压反应釜法[2]。由于微波照射具有对物质高效、均匀的加热作用,同时还具有电磁场对反应分子间行为的直接作用而引起的所谓“非热效应”,所以本实验采用微波照射法用正辛醇对SiO2纳米微粒进行表面酯化反应并与常规回流法进行比较。关于该方面的研究报道国内外较少。1实验部分1.1实验原料纳米SiO2:(10~20nm...     

结合表面引发的原子转移自由基聚合和气/固反应制备CdS纳米微粒/聚苯乙烯核壳微球

结合表面引发的原子转移自由基聚合和气/固反应制备CdS纳米微粒/聚苯乙烯核壳微球. 以表面富含环氧基团的聚苯乙烯微球为基底, 利用开环反应在水相中一步接枝表面引发剂, 然后在聚苯乙烯微球表面引发甲基丙烯酸镉的原子转移自由基聚合, 最后通入H2S气体原位生成CdS纳米微粒. 生成的CdS纳米微粒复合的核壳微球呈草莓状形貌, 且具有良好的光学性能.     

表面引发接枝聚合法制备接枝微粒PHEMA/SiO2及其8-羟基喹啉功能化转变研究

通过用表面引发接枝聚合和高分子反应制备8-羟基喹啉型复合螯合微粒.首先使用γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性,制得改性微粒AMPS-SiO2;使改性微粒AMPS-SiO2表面的氨基与溶液中的过硫酸盐构成氧化-还原引发体系,实施了甲基丙烯酸羟乙酯(HEMA)在硅胶微粒表面的高效引发接枝聚合,制得了接枝微粒PHEMA/SiO2.又以5-氯甲基-8-羟基喹啉(CHQ)为试剂,使接枝的PHEMA发生大分子反应,实现了接枝微粒PHEMA/SiO2的8-羟基喹啉功能化转变,制得了复合微粒HQ-PHEMA/SiO2.采用多种手段对两种微粒进行了表征,重点研究了氨基-过硫酸盐表面引发接枝体系的接枝聚合机理,并研究了CHQ与接枝PHEMA的醇羟基之间取代反应的机理,还初步考察了功能微粒HQ-PHEMA/SiO2对重金属离子的螯合吸附性能.研究结果表明,氨基-过硫酸盐表面引发接枝聚合体系具有很高的引发活性,在室温(30℃)即可制得高接枝密度(40 g/100g)的接枝微粒PHEMA/SiO2;CHQ与接枝PHEMA的醇羟基之间的取代反应遵循SN1的反应历程,使用强极性溶剂有利于反应的进行.微粒HQ-PHEMA/SiO2对重金属离子呈现很强的螯合吸附能力,是一种功能复合微粒.     

制备方法对模板法制备SiO_2中空微球形貌的影响

模板法是制备无机中空微球的重要方法之一.首先通过苯乙烯和甲基丙烯酸的无皂乳液聚合法制得表面含羧基、粒径为360nm的单分散聚苯乙烯(PSt)乳胶粒,并以此为模板,分别采用表面改性-前驱体水解法(PHC)和SiO2纳米颗粒层层自组装法(LBL),制备出了不同壳层厚度的PSt/SiO2核壳结构复合微球,然后经500℃煅烧4h,得到SiO2中空微球.利用透射电镜和扫描电镜对微球结构形态进行了表征.研究表明,首先利用γ-氨丙基三乙氧基硅烷(KH-550)对PSt模板微球进行表面改性、然后再在乙醇-水混合介质中进行原硅酸乙酯(TEOS)水解与缩合反应的PHC法,是制备PSt/SiO2核壳结构复合微球的简便方法,复合微球经煅烧可制得表面均匀、结构致密、壳层厚度和形貌可控的SiO2中空微球;而LBL法制备PSt/SiO2核壳结构复合微球的工艺复杂,煅烧后所得SiO2中空微球结构疏松,易于破碎.     

构建芳叔胺-BPO氧化还原引发体系实现苯乙烯在硅胶微粒表面的高效接枝聚合

首先使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行了表面改性,制得表面带有伯胺基的改性微粒SiO2-AMPS,接着使4-(二乙氨基)水杨醛(DEAS)与微球SiO2-AMPS发生席夫碱反应,制得表面含有芳叔胺基的改性微粒SiO2-DEAS.使改性微粒SiO2-DEAS表面的芳叔胺基团与溶液中的BPO构成氧化-还原引发体系,实现了油溶性单体苯乙烯(St)在硅胶微粒表面的引发接枝聚合,制得了高接枝度(27 g/100g)的接枝微粒SiO2-DEAS-g-PSt.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-DEAS-g-PSt进行了表征.在此基础上,重点研究了主要因素对芳叔胺-BPO体系引发St接枝聚合的影响.研究结果表明,与在固体微粒表面引入可聚合双键的"穿过接枝"(grafting through)法相比,芳叔胺-BPO体系引发的接枝聚合,由于活性位点位于载体表面,故具有高的接枝度,是油溶性单体的一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-DEAS-g-PSt,适宜的温度为50℃,适宜的BPO用量为单体的3 wt%左右,适宜的单体浓度为10 wt%.     

表面富集季胺盐的交联聚苯乙烯微球合成与表征及其溶胀行为研究

在聚合物微球表面引入不同的基团 (如亲水性的羟基或羧基 ) ,可以改善聚合物微球的稳定性甚至生物相容性[1～ 4] ;利用表面基团可以把无机半导体微粒和功能有机分子以及生物分子引入聚合物微球[5～ 8] ,赋予聚合物微球特殊的性能 ,使其广泛应用于涂料、光电功能材料和生物医用材料等领域[9～ 15] .其中 ,表面带有阳离子的聚合物微球在絮凝剂、胶粘剂、水性涂料等方面已经得到广泛研究[16～ 2 0 ] .通常阳离子聚合物微球可以根据不同的需要利用常规乳液聚合、核壳乳液聚合等方法来合成 .亲水性和疏水性单体进行的无皂乳液聚合[2 1] ,因其能在…     

不同聚合物对纳米SiO2表面改性的研究进展

纳米SiO2由于具有无味、无毒、无污染等特性,因而被广泛用作无机纳米填料。纳米SiO2极易团聚,从而限制了它的广泛应用。但纳米SiO2表面富含大量的硅羟基,可对其进行表面改性。纳米SiO2表面改性的方法较多,主要有表面物理改性和表面化学改性两种,其中表面化学改性中又以聚合物改性的效果最好。本文综述了国内外利用不同的聚合物——亲水性、疏水性和两亲性聚合物对纳米SiO2表面的化学改性,并对其应用进行了分析,展望了其发展前景。     

聚合物对多壁碳纳米管的包覆改性研究

探讨了聚合物对碳纳米管的包覆改性.将多壁碳纳米管(MWNTs)通过浓硫酸和浓硝酸的混酸(体积比=3∶1)处理,使其带上羧基.将羧化MWNTs与甲基丙烯酸缩水甘油酯(GMA),苯乙烯双组分接枝聚苯乙烯(PS-g-(GMA-co-St))通过溶液共混方法,使其接在MWNTs上的羧基和GMA所带的环氧基团之间发生酯化反应,实现MWNTs表面接枝上PS-g-(GMA-co-St).扫描电镜观察表明,羧化MWNTs平均管径约为40nm,而接枝上PS-g-(GMA-co-St)的改性MWNTs管径可达约100nm.用四氢呋喃(THF)对表层包覆的PS-g-(GMA-co-St)刻蚀后,其直径降回到约40nm,这和先前观察到的羧化MWNTs的直径基本一致.对刻蚀后的MWNTs样品的FT-IR分析也表明MWNTs表面上存在接枝PS.表面经过PS-g-(GMA-co-St)修饰后,可以形成包覆层,为MWNTs在聚合物基体中分散、制备纳米功能材料提供了途径.     

表面改性纳米SiO2复合聚合物电解质的制备及性能

通过化学方法将具有增塑效果的环状碳酸酯基团引入纳米SiO2表面,并用FTIR与TGA对改性纳米SiO2进行了表征.将改性纳米SiO2添加到以聚氧化乙烯(PEO)为基体的聚合物电解质中,制备了复合聚合物电解质.通过DSC和交流阻抗等方法对该聚合物电解质膜的热力学和电化学性能进行了研究.结果表明,掺杂改性纳米SiO2的聚合物电解质具有更高的离子电导率,室温最高离子电导率可达到1.84×10-5 S/cm;具有较高的锂离子迁移数,最高可达到0.49,且具有更好的界面稳定性.     

磁性SiO2/PSt中空复合微球的细乳液法制备及表征

采用双原位细乳液聚合工艺,将疏水改性的磁性纳米粒子(MNP)加入到细乳液反应体系的油相中,利用增长的聚合物和单体TEOS之间的相分离原理,实现了聚合物的生成和TEOS的水解缩合同步进行,一步获得了磁性SiO2/PSt中空复合微球.通过红外光谱(FTIR)、透射电镜(TEM)、热重差热分析(TGA/DSC)和振动磁强计(VSM)对中空复合微球进行了表征.结果表明,制备的SiO2/PSt中空复合微球的尺寸范围为300～600 nm,当加入磁性纳米粒子后,得到的磁性SiO2/PSt中空微球保持了原来的中空结构,中空复合微球内腔的大小可以通过改变单体TEOS的加入量来控制.SiO2/PSt中空微球对磁性纳米粒子的包封率达到了86%.磁性SiO2/PSt中空复合微球具有超顺磁性,饱和磁强度值为14.7 emu/g.     

PREPARATION OF POLYSTYRENE/SiO2 COMPOSITE NANOPARTICLES BEARING SULFONIC GROUPS ON THE SURFACE VIA EMULSION COPOLYMERIZATION USING A POLYMERIZABLE EMULSIFIER

Functionalized PS/SiO_2 composite nanoparticles bearing sulfonic groups on the surface were successfully synthesized via emulsion copolymerization using a polymerizable emulsifierαolefin solfonate(AOS).As demonstrated by transmission electron microscopy and atomic force microscopy,well-defined core-shell PS/SiO_2 composite nanoparticles with a diameter of 50 nm were obtained.Sulfonic groups introduced onto the surface of the composite nanoparticles were quantified by FTIR,and can be controlled to some ex...     

Effective grafting of polymers onto ultrafine silica surface: Photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface and Mn2(CO)10

The effective grafting of vinyl polymers onto an ultrafine silica surface was successfully achieved by the photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface with Mn₂(CO)₁₀ under UV irradiation at 25 °C. The introduction of trichloroacetyl groups onto the surface of silica was achieved by the reaction of trichloroacetyl isocyanate with surface amino groups, which were introduced by the treatment of silica with 3‐aminopropyltriethoxysilane. During the polymerization, the corresponding polymers were effectively grafted onto the surface, based on the propagation of polymer from surface radicals formed by the interaction of trichloroacetyl groups and Mn₂(CO)₁₀. The percentage of poly(methyl methacrylate) grafting onto the silica reached 714.6% after 90 min. The grafting efficiency (proportion of grafted polymer to total polymer formed) in the polymerization of methyl methacrylate was very high, about 80%, indicating the depression of formation of ungrafted polymer. Polymer‐grafted silica gave a stable colloidal dispersion in good solvents for grafted polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2157–2163, 2001     

Synthesis of well-defined, polymer-grafted silica nanoparticles via reverse ATRP

The surface grafting onto ultrafine silica via reverse ATRP of methyl methacrylate initiated by peroxide groups introduced onto the surface and conventional ATRP of Styrene initiated by the hybrid nanoparticles were investigated. The introduction of peroxide groups onto the silica surface was achieved by the reaction of hydrogen peroxide with chlorosilyl groups, which were introduced by the treatment of silica with thionyl chloride. Well-defined polymer chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polymer layer. The polymerization was closely controlled in solution at quite low temperature such as 70 °C. In both cases, linear kinetic plots, linear plots of molecular weight (M_n) versus conversion, in hydrodynamic diameter with increasing conversion, and narrow molecular weight distributions (M_w/M_n) for the grafted polymer samples were observed. Hydrolysis of silica cores by hydrofluoric acid treatment enabled characterization of cleaved polymer using GPC. Ultrathin films of hybrid nanoparticles were examined using TEM and AFM.     

Preparation of Iminoacetic Acid-type Composite Chelating Material IAA-PEI/SiO2 and Preliminary Studies on Chelating Adsorption Property towards Heavy Metal Ions

Polyamine polyethyleneimine (PEI) was first grafted on the surfaces of micro-sized silica gel particles in the manner of the coupling graft (the manner of “grafting to”), forming the grafting particles PEI/SiO₂. Subsequently, via a polymer reaction, the nucleophilic substitution reaction between the primary and secondary amino groups of the grafted PEI macromolecule and chloroactic acid (CAA), iminoacetic acid groups were bonded onto the grafted PEI chains, and an iminoacetic acid (IAA)-type composite chelating material, IAA-PEI/SiO₂, was formed. In this work, the preparation process of IAA-PEI/SiO₂ particles was mainly researched, and the effects of the main factors on the polymer reaction, i.e., the nucleophilic substitution reaction, were examined emphatically. The adsorption behavior of IAA-PEI/SiO₂ particles towards several kinds of heavy metal ions was preliminarily evaluated. The experiments results show that it is feasible to introduce IAA groups onto PEI/SiO₂ particles via the substitution reaction between CAA and the amino groups of the grafted PEI. The reaction rate is affected greatly by the feed ratio of the amino group of PEI to CAA, so the substitution reaction between CAA and the amino groups of the grafted PEI is a bimolecular nucleophilic substitution reaction (S_N2). The reaction temperature and the used amount of acid-acceptor NaHCO₃ affect the bonding rate of IAA groups greatly. The fitting temperature was 60°C, and 1:1 of the molar ratio of NaHCO₃ to CAA was an appropriate amount of acid-acceptor NaHCO₃. Under the above optimal reaction conditions and with 3:1 molar ratio of amino group of PEI to CAA, 72% of the IAA group bonding rate (it is based on the hydrogen atoms in the primary and secondary amino groups of the grafted PEI) in 8 h can be reached. The composite chelating material IAA-PEI/SiO₂ possesses a strong chelating adsorption ability for heavy metal ions because of the increase of the ligands and formation of stable five-membered chelate rings.     

ATRP技术用于热敏性高聚物在硅胶表面的接枝

在超细硅胶表面引入原子转移自由基聚合(ATRP)的引发基团,通过ATRP技术使N-异丙基丙烯酰胺(NIPAM)在硅胶表面接枝聚合,合成得到了具有温敏性的核-壳复合微粒.通过FTIR,TG,EA,SEM,DSC等分析方法对接枝前后的复合粒子进行了分析与表征,结果证明聚N-异丙基丙烯酰胺(PNIPAM)接在了硅胶表面.TG分析得出PNIPAM在硅胶表面的接枝率达到25.2%;DSC分析表明复合硅胶具有温度敏感性,在34.1℃时发生相转变行为;GPC分析得出从复合硅胶表面"劈下"的聚合物PNIPAM的数均分子量约为8000,分子量分布为1.06.复合微粒表面均匀平坦,显示出活性聚合的优越性.     

Preparation and characterization of poly(methyl methacrylate)/titanium oxide composite particles

Before polymerization, the introduction of double bonds onto the surface of the TiO₂ particles was achieved by the treatment of the TiO₂ particles with the silane-coupling agent. Via in-situ emulsion polymerization, the poly(methyl methacrylate) (PMMA)/titanium oxide (TiO₂) composite particles were prepared by graft polymerization of MMA from the surface of the modified TiO₂ particles. The structure of the obtained PMMA/TiO₂ composite particles was characterized using fourier transform infrared spectra (FT-IR), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and size excluding chromatography (SEC). The morphology of the obtained PMMA/TiO₂ composite particles was observed by transmission electron microscope (TEM). The results of FT-IR and TGA measurements show that PMMA is successfully grafted from the surface of the TiO₂ particles and that the percentage of grafting and the grafting efficiency can reach 208.3% and 96.6%, respectively. At the same time, the TGA and DSC measurements indicate an enhancement of thermal stability. TEM images demonstrate a better dispersion of the TiO₂ particles in the composite latex. In addition, UV-visible absorption measurements show that the PMMA/TiO₂ composite particles can absorb over 95% UV light at 210–400 nm wavelength.     

Grafting of polymers with controlled molecular weight onto ultrafine silica surface

To graft polymers with controlled molecular weight and narrow molecular weight distribution, the grafting of polymers onto ultrafine silica surface by the termination of living polymer cation with amino groups introduced onto the surface was investigated. The introduction of amino or N-phenylamino groups onto the silica surface was achieved by the treatment of silica with γ-aminopropyltriethxysilane or N-phenyl-γ-aminopropyltrimethoxysilane. It was found that these amino groups on silica are readily reacted with living poly(isobutyl vinyl ether) (polyIBVE), which was generated with CF₃COOH/ZnCl₂ initiating system, and polyIBVE with controlled molecular weight and narrow molecular weight distribution is grafted onto the surface. By the termination of living poly(2-methyl-2-oxazoline), which was generated with methyl p-toluenesulfonate initiator, with amino groups on silica, polyMeOZO was also grafted onto the surface. The percentage of grafting of polymer onto the silica surface decreased with increasing molecular weight of the living polymer, because the steric hindrance of silica surface increases with increasing molecular weight of living polymer. Polymer-grafted silica gave a stable dispersion in a good solvent for grafted chains. © 1995 John Wiley & Sons, Inc.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Cationic Grafting of Vinyl Polymers onto a Carbon Whisker,Initiated by Acylium Perchlorate Groups Introduced onto the Surface

Abstract

The cationic graft polymerization of vinyl monomers onto a carbon whisker, vapor-grown carbon fiber, initiated by acylium perchlorate groups introduced onto the surface, was investigated. The introduction of acylium perchlorate groups onto a carbon whisker was achieved by the treatment of a carbon whisker having acyl chloride groups, which were introduced by the reaction of surface carboxyl groups with thionyl chloride, with silver perchlorate in nitrobenzene. It was found that the cationic polymerization of vinyl monomers, such as styrene, indene, N-vinyl-2-pyrrolidone, and n-butyl vinyl ether, is initiated by acylium perchlorate groups on a carbon whisker. In the polymerization, the corresponding vinyl polymers were grafted onto a carbon-whisker surface based on the propagation of polymer from the surface: the percentage of grafting of polystyrene and polyindene reached 42.5 and 100.3%, respectively. The percentage of polystyrene grafting decreased with increasing polymerization temperature because of preferential chain transfer reactions at higher temperatures. Polymer-grafted carbon whisker gave a stable colloidal dispersion in a good solvent for grafted polymer.