Mn修饰Al2O3载体负载Pd催化剂及其蒽醌加氢催化性能

以活性氧化铝(γ-Al2O3)为载体,分别以Mn(NO3)2溶液和酸性氯化钯(PdCl2)溶液为修饰组分和活性组分前体,采用分步浸渍法制备了Mn修饰Al2O3载体负载钯催化剂。将催化剂应用于蒽醌加氢反应,考察了催化剂制备方法、活性组分负载量和催化剂还原温度对反应效果的影响。用XRD、BET、XPS和TPR对催化剂进行了表征。结果表明,催化剂活性受到制备方法的影响,在对Mn修饰Al2O3载体进行焙烧,Pd负载量0.2(wt)%、还原温度300℃的条件下,催化剂蒽醌加氢活性较高,较未修饰的催化剂提高了约16%。催化剂中Mn以MnO的形式存在,影响了γ-Al2O3的组织结构,使载体与活性组分之间的作用力增强,活性组分Pd高度分散在催化剂表面,从而提高了催化剂的活性。     

负载型磷钨酸催化剂的制备及其催化果糖分解制备5-羟甲基糠醛的研究

以MCM-41、HZSM-5以及丝光沸石（MOR）为载体,磷钨酸（PW）为活性组分,通过浸渍法制备一系列负载型磷钨酸催化剂;采用FTIR、XRD、N2-吸附-脱附和NH3程序升温脱附等分析手段对催化剂进行表征．结果表明在负载活性物质过程中,载体骨架未被破坏,PW以无定形结构均匀分散到载体的表面并与载体间存在着明显的键合...     

铁、钴或镍助剂促进的 Ag/SiO2 催化剂上气相催化合成 3-甲基吲哚

 将铁、钴或镍促进的 Ag/SiO2 催化剂用于苯胺和 1,2-丙二醇气相催化合成 3-甲基吲哚的反应中, 并采用 X 射线衍射、H2-程序升温还原和热重分析等技术对催化剂进行了表征. 结果表明, 铁或镍助剂的加入有助于提高 Ag/SiO2 催化剂的选择性. 其中, 铁的加入能增强活性组分银与载体间相互作用, 大大促进了银在载体表面上的分散, 使催化剂的初活性显著提高. 而钴或镍的加入虽然能略微减少反应过程中 Ag/SiO2 催化剂表面的积炭, 但加剧了银在反应过程中的烧结, 导致催化剂稳定性下降.     

铈和镧改性γ-Al2O3担载Pd催化剂的结构效应

分别以镧-铈、铈-镧顺序浸渍和镧铈共浸渍的方式在γ-Al2O3载体上引入助剂La2O3和CeO2,然后担载Pd制备了一系列催化剂.以甲醇分解为探针反应,采用XRD、EXAFS和XPS对催化剂的体相和表面结构进行表征,用BET法测定比表面积,并进行了吸附态CO的FTIR研究.结果表明,La2O3容易进入CeO2的晶格中,促进了CeO2在γ-Al2O3上的分散.但不同的La2O3、CeO2加入方式对活性组分Pd在改性载体上的分散度、优势暴露面及其与CeO2之间的相互作用产生不同的影响.关联甲醇分解性能测试结果说明,Pd在载体上的高度分散以及Pd和CeO2之间通过界面产生的强相互作用是催化剂具有高活性的关键.     

铈和镧改性γ-Al2O3担载Pd催化剂的结构效应

分别以镧-铈、铈-镧顺序浸渍和镧铈共浸渍的方式在γ-Al2O3载体上引入助剂La2O3和CeO2，然后担载Pd制备了一系列催化剂.以甲醇分解为探针反应，采用XRD、EXAFS和XPS对催化剂的体相和表面结构进行表征，用BET法测定比表面积，并进行了吸附态CO的FTIR研究.结果表明,La2O3容易进入CeO2的晶格中，促进了CeO2在γ-Al2O3上的分散.但不同的La2O3、CeO2加入方式对活性组分Pd在改性载体上的分散度、优势暴露面及其与CeO2之间的相互作用产生不同的影响.关联甲醇分解性能测试结果说明,Pd在载体上的高度分散以及Pd和CeO2之间通过界面产生的强相互作用是催化剂具有高活性的关键.     

负载型催化剂的表面相互作用及其在大气分子污染物NO和CO消除中的应用基础研究

负载型催化剂具有重要的应用背景,研究表面分散组分与载体之间的相互作用.对于了解催化过程的本质,进而设计开发高效实用的催化剂均有重要的指导意义.本课题组近年来在该领域中进行了一些探索研究,涉及的催化剂以负载型金属氧化物(如CuO/γ-Al_2O_3,CuO/Ce_xZr_(1-x)O_2和CuO/Ti_xSn_(1-x)O_2等)为主,涉及的反应包括CO完全氧化和NO+CO反应.通过改变活性组分的负载量、添加改性剂和改变样品制备条件等制得一系列样品,用多种固体催化剂表征手段考察各组分在催化剂中的作用以及在上述催化反应中的活性变化规律.研究表明:(1)金属氧化物和卤化物等离子化合物在氧化物载体表面的分散容量和分散后的一些性质均可从"嵌入模型"的考虑得到解释;(2)处于不同载体表面的活性物种或同一载体表面不同结构的活性物种,由于其存在状态的差异使得其氧化还原性质和催化性质不同;(3)在相关催化剂体系中进行的CO完全氧化和NO+CO反应的结果显示,通过探索催化剂的"组成-结构-性质"间的关系,有可能为实际催化剂的设计提供理论参考.     

Na-W-Mn/SiO2催化剂中的组分协同效应

 利用XRD, SEM和Raman光谱等手段对Na-W-Mn/SiO2催化剂中形成的物相、活性组分在载体表面的分散度以及催化剂表面的金属中心结构进行了研究. 结果表明,组分间的相互作用对各活性组分在催化剂中的存在形式有重要影响. 在无定形氧化硅表面, W以八面体六配位WO3形式存在,在α方石英表面, W以四面体四配位的WO4形式存在. 没有组分Na时, W或Mn在催化剂表面以氧化物颗粒形式存在; Na的加入不仅可大大提高W或Mn在催化剂表面的分散度,而且可使WO4四面体的结构变得十分均一. 反应性能研究还表明, Na和Mn之间存在很强的电子相互作用,对于含Mn催化剂的选择性具有重要影响.     

镧助剂对铜硅催化剂结构及其甘油氢解性能影响研究

在沉淀凝胶法制备的Cu/SiO2催化剂中采用浸渍法添加La助剂,制备了一系列不同La含量的Cu-La2O3/SiO2催化剂,利用BET、XRD、TPR、XPS和TEM对催化剂进行了系统表征,并在高压反应釜中对其进行了甘油氢解制备1,2-丙二醇活性评价,研究了La含量对催化剂高温热稳定性及甘油氢解活性的影响.结果表明:适量La的引入能明显抑制催化剂的高温烧结,维持催化剂的大比表面及活性组分的高分散,提高催化剂的结构稳定性;同时对减少反应过程中活性组分的流失也有很好的效果.铜镧之间存在着协同作用,经高温焙烧后得到加强,对Cu/SiO2催化剂的甘油氢解活性有很好的促进作用.     

固体炭对一氧化氮低温催化解离还原反应的影响——Ⅱ.复合催化剂中铁在载体炭上化学形态的研究

用~(57)Fe穆斯堡尔谱研究了炭载型复合催化剂中铁化学形态随温度的变化,及各活性组分、助剂对铁化学形态的影响;并通过ESR谱考察了复合催化剂中不同活性组分对铁在载体炭表面电子特性的影响。研究结果表明,复合催化剂中各活性组分、助剂和载体炭与铁之间存在着强相互作用。在350～650℃,载体炭可将铁从Fe_2O_3还原到Fe_3O_4、FeO、α-Fe和生成炭化铁。活性组分Cu和助剂K可改变催化剂中铁周围的电子密度,促进铁在载体炭上从高价态向低价态还原。同时还发现催化剂中Na和Cr对铁有很强的助分散作用。     

X光衍射相定量外推法测定活性组分在载体表面的分散阈值

活性组分与载体的相互作用,活性组分在载体表面分散的结构状态,以及活性组分在载体表面的最大分散量(分散阈值)是多相催化剂研究中的基本问题。活性组分在载体表面的分散状态和分散阈值取决于活性组分和载体本身的结构和性质。活性组分在载体表面的分散,总是在载体表面能量上和几何上有利的位置进     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.