Fast electron transfer and enhanced visible light photocatalytic activity by using poly-o-phenylenediamine modified AgCl/g-C3N4 nanosheets

Exfoliation of bulk graphitic carbon nitride (g-C₃N₄) into two-dimensional (2D) nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g-C₃N₄ nanosheets (CN) have larger specific surface areas and more reaction sites. In addition, poly-o-phenylenediamine (PoPD) can improve the electrical conductivity and photocatalytic activity of semiconductor materials. Here, the novel efficient composite PoPD/AgCl/g-C₃N₄ nanosheets was first synthesized by a precipitation reaction and the photoinitiated polymerization approach. The obtained photocatalysts have larger specific surface areas and could achieve better visible-light response. However, silver chloride (AgCl) is susceptible to agglomeration and photocorrosion. The PoPD/AgCl/CN composite exhibits an extremely high photocurrent density, which is three times that of CN. Obviously enhanced photocatalytic activities of PoPD/AgCl/g-C₃N₄ are revealed through the photodegradation of tetracycline. The stability of PoPD/AgCl/CN is demonstrated based on four cycles of experiments that reveal that the degradation rate only decreases slightly. Furthermore, ?O₂^? and h⁺ are the main active species, which are confirmed through a trapping experiment and ESR spin-trap technique. Therefore, the prepared PoPD/AgCl/CN can be considered as a stable photocatalyst, in which PoPD is added as a charge carrier and acts a photosensitive protective layer on the surface of the AgCl particles. This provides a new technology for preparing highly stable composite photocatalysts that can effectively deal with environmental issues.     

Flower-like shaped Bi12TiO20/g-C3N4 heterojunction for effective elimination of organic pollutants: Preparation,characterization, and mechanism study

Flower-like shaped Bi₁₂TiO₂₀ (Bismuth Titanate)/g-C₃N₄ (graphite-like carbon nitride) heterojunction was prepared through hydrothermal and sonification methods for the degradation of organic pollutants by visible-light irradiation. The preparation process, chemical structures, and the mechanism of photocatalytic enhancement of the heterostructures were studied systematically. Under visible-light irradiation, the novel flower-like shaped Bi₁₂TiO₂₀/g-C₃N₄ heterojunction demonstrates prominent activities for the degradation of rhodamine B and p-nitrophenol, with the introduction of flower-like shaped Bi₁₂TiO₂₀ into g-C₃N₄ composites greatly increasing the activity of pure g-C₃N₄. This activity enhancement for the heterojunction could be mainly attributed to its low recombination speed of electron–hole pairs, high adsorption ability of organic pollutants, and better optical absorption ability. Moreover, in the visible-light system of Bi₁₂TiO₂₀/g-C₃N₄, ^•OH also contributed to the degradation of pollutants, which may explain the enhanced photocatalytic activity after the introduction of Bi₁₂TiO_20, as ^•OH is inactive in pure g-C₃N₄. Furthermore, 10 wt.% Bi₁₂TiO₂₀/g-C₃N₄ showed not only high activity but also good stability for degradation of aqueous organic pollutants, implying potential applications prospect.     

Degradation of tetracycline hydrochloride by ultrafine TiO2 nanoparticles modified g-C3N4 heterojunction photocatalyst: Influencing factors,products and mechanism insight

The unique heterojunction photocatalyst of graphite carbon nitride（g-C₃N₄） modified ultrafine TiO₂（gC₃N₄/Ti O₂） was successfully fabricated by electrochemical etching and co-annealing method. However,the effects of various environmental factors on the degradation of TC by g-C₃N₄/Ti O2and the internal reaction mechanism are still unclear. In this study, the effects of initial p H, anions, and cations on the ph...     

Photocatalytic removal of tetracycline by a Z-scheme heterojunction of bismuth oxyiodide/exfoliated g-C3N4: performance,mechanism, and degradation pathway

Antibiotics, once being released into the environment, become recalcitrant organic pollutants, which pose a potential risk to ecological balance and human health. In this study, a Z-scheme heterojunction of bismuth oxyiodide (BiOI)/exfoliated g-C₃N₄ (BiOI/ECN hereafter) was synthesized by the combination of thermal exfoliation of g-C₃N₄ and chemical precipitation of BiOI for efficient photocatalytic degradation of tetracycline in aqueous solutions under visible light irradiation. The optimized BiOI/ECN delivered an outstanding degradation rate at circa 0.0705 min^?1, which was 10 times higher than that of the bulk g-C₃N₄. The photocatalytic degradation efficiency of tetracycline remained almost unchanged in a pH range of 3–11, and the BiOI/ECN displayed an excellent photostability upon recycled usage. The photocatalytic mechanism of tetracycline was ascribed to the main reactive oxidation species of photogenerated holes and superoxide radicals. In addition, the possible degradation pathways of tetracycline were investigated by HPLC-MS to identify intermediates. The toxicity of photocatalytic-generated intermediates of tetracycline was found significantly alleviated according to the calculation of quantitative structure–activity relationship prediction. This work not only provides an attractive photocatalyst for the removal of tetracycline but also opens a new avenue for rational design of Z-scheme heterojunction composites for tetracycline degradation.     

Enhanced photocatalytic H2 production over dual-cocatalyst-modified g-C3N4 heterojunctions

Ag nanoparticles (NPs) were deposited on the surface of g-C₃N₄ (CN) by an in situ calcination method. NiS was successfully loaded onto the composites by a hydrothermal method. The results showed that the 10 wt%-NiS/1.0 wt%-Ag/CN composite exhibits excellent photocatalytic H₂ generation performance under solar-light irradiation. An H₂ production rate of 9.728 mmol·g^?1·h^?1 was achieved, which is 10.82-, 3.45-, and 2.77-times higher than those of pure g-C₃N₄, 10 wt%-NiS/CN, and 1.0 wt%-Ag/CN composites, respectively. This enhanced photocatalytic H₂ generation can be ascribed to the co-decoration of Ag and NiS on the surface of g-C₃N₄, which efficiently improves light harvesting capacity, photogenerated charge carrier separation, and photocatalytic H₂ production kinetics. Thus, this study demonstrates an effective strategy for constructing excellent g-C₃N₄-related composite photocatalysts for H₂ production by using different co-catalysts.     

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

中空管状g-C3N4/Ag3PO4复合催化剂的制备及其可见光催化性能

采用化学沉淀法制备中空管状 g-C₃N₄/Ag₃PO₄复合催化剂。通过 X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)和荧光光谱对其结构、形貌和光学性能进行了表征。结果表明：Ag₃PO₄纳米颗粒均匀地分散在中空管状g-C₃N₄表面,两者紧密结合形成异质结。研究复合催化剂在可见光照射下降解盐酸四环素(TC)的光催化活性。结果显示：复合催化剂在80 min内对TC的降解率为98%,其降解反应速率常数是纯相Ag₃PO₄的3倍。经过5次循环实验后复合催化剂对于TC的降解率仍保持87%,具有优良的循环稳定性。捕获实验表明空穴(h⁺)和超氧负离子(·O₂^ˉ)是光催化反应过程中的主要活性物种。根据能带理论,提出了复合催化剂异质结的Z型光催化机理。     

Construction of direct Z-scheme g-C3N4/TiO2 nanorod composites for promoting photocatalytic activity

Direct Z-scheme g-C₃N₄/TiO₂ nanorod composites were prepared for enhancing photocatalytic activity for pollutant removal. The characterization revealed that the g-C₃N₄/TiO₂ nanorod composite formed a close interface contact between g-C₃N₄ and TiO₂ nanorods, which was of benefit for the charge transfer and resulted in its high photocatalytic activity. The g-C₃N₄/TiO₂ nanorod composites exhibited higher photocatalytic activity for degradation of Rhodamine B (RHB) than bare g-C₃N₄ and TiO₂ nanorods. The high photocatalytic activity of g-C₃N₄/TiO₂ nanorod composites is attributed to the formation of the direct Z-scheme system, in which the electrons from the conduction band (CB) of TiO₂ combine with the holes from the valence band (VB) of C₃N₄ while the electrons from the CB of C₃N₄ and holes from the VB of TiO₂ with stronger redox ability are used to reduce and oxidize pollutants. Based on the radical-trapping experiments, the main reactive species for RHB degradation are O₂⁻ and · OH, which are produced by photoinduced electrons and holes with high redox ability. This work provides insights into the photocatalytic mechanism of composite materials for the photocatalytic removal of organic pollutants.     

In-situ polymerization for PPy/g-C3N4 composites with enhanced visible light photocatalytic performance

Polypyrrole-modified graphitic carbon nitride composites (PPy/g-C₃N₄) are fabricated using an in-situ polymerization method to improve the visible light photocatalytic activity of g-C₃N₄. The PPy/g-C₃N₄ is applied to the photocatalytic degradation of methylene blue (MB) under visible light irradiation. Various characterization techniques are employed to investigate the relationship between the structural properties and photoactivities of the as-prepared composites. Results show that the specific surface area of the PPy/g-C₃N₄ composites increases upon assembly of the amorphous PPy nanoparticles on the g-C₃N₄ surface. Owing to the strong conductivity, the PPy can be used as a transition channel for electrons to move onto the g-C₃N₄ surface, thus inhibiting the recombination of photogenerated carriers of g-C₃N₄ and improving the photocatalytic performance. The elevated light adsorption of PPy/g-C₃N₄ composites is attributed to the strong absorption coefficient of PPy. The composite containing 0.75 wt% PPy exhibits a photocatalytic efficiency that is 3 times higher than that of g-C₃N₄ in 2 h. Moreover, the degradation kinetics follow a pseudo-first-order model. A detailed photocatalytic mechanism is proposed with ·OH and ·O₂^? radicals as the main reactive species. The present work provides new insights into the mechanistic understanding of PPy in PPy/g-C₃N₄ composites for environmental applications.     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Fabrication of an efficient ternary TiO2/Bi2WO6 nanocomposite supported on g-C3N4 with enhanced visible-light- photocatalytic activity: Modeling and systematic optimization procedure

In this study, a ternary TiO₂/g-C₃N₄/Bi₂WO₆ nanocomposite was prepared via a facial approach. The final structure was applied as a new photocatalyst for the removal of brilliant green (BG) dye, as a model of organic pollutants, from the aqueous solution. The results of FESEM, EDS with mapping, XRD, FTIR, UV–vis DRS, PL, and EIS analyses further demonstrate the successful establishment of heterojunction between TiO_2, g-C₃N₄, and Bi₂WO₆. Integration of g-C₃N₄ and Bi₂WO₆ with TiO2 was remarkably decreased the band gap energy of TiO₂ to 2.68 eV (from 3.15 eV). The effects of various experimental factors such as TiO₂/g-C₃N₄/Bi₂WO₆ dosage, initial BG concentration, visible irradiation time, and pH on the photocatalyst behavior of TiO₂/g-C₃N₄/Bi₂WO₆ were investigated by 2 ^k-1 factorial design. The results of the analysis of variance demonstrate these experimental factors are effective on the BG degradation efficiency. The response surface methodology was applied to achieve the optimization procedure of BG degradation. According to these results, the complete BG removal efficiency was obtained for the optimal conditions of 15.76 mg of TiO₂/g-C₃N₄/Bi₂WO₆ nanocomposite, an initial BG concentration of 10 ppm, pH of 9, and time duration of 70 min. The improved photocatalytic performance of ternary TiO₂/g-C₃N₄/Bi₂WO₆ nanocomposite was related to the formation of heterojunction between TiO_2, g-C₃N₄, and Bi₂WO₆, significant light adsorption ability, and low recombination of photogenerated carriers.     

CeTiO4/g-C3N4复合材料的制备及其高效的光催化染料降解性能

采用简单固相法成功制备了CeTiO₄/g?C₃N₄?x(CTO/CN?x,x g为g?C₃N₄的添加量)复合材料,并通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N₂吸附-脱附测试、紫外可见吸收光谱(UV?Vis)及电化学测试对材料进行表征。研究发现:CeTiO₄与g?C₃N₄层状纳米片紧密复合,并成功构建了界面异质结结构;形成CTO/CN?x复合相的光催化材料具有良好的可见光光响应性能,且光生空穴-电子对的分离和迁移率明显提高;通过太阳光模拟不同样品光催化降解有机污染物罗丹明B,降解140 min后复合材料CTO/CN?6表现出最高的光催化活性,反应速率常数为0.0202 min^-1。其活性增强的主要原因是异质结结构的构筑降低了CTO光生载流子的复合几率,提高了光生载流子的迁移速率。     

Upgraded charge transport in g-C3N4 nanosheets by boron doping and their heterojunction with 3D CdIn2S4 for efficient photodegradation of azo dye

The facilitation of charge transport toward the targeted chemical reaction is a challenging task for two-dimensional (2D) nanomaterials. We demonstrate the effectiveness of two different strategies, non-metal doping and heterojunction formation, to adjust the electronic and molecular structures of g-C₃N₄ nanosheets (CN), which could widen the visible-light response and improve the photo-induced electron–hole separation. The g-C₃N₄ nanosheets containing impurity levels (boron doping (BCN)) were prepared by a high-temperature solid-state reaction. Additionally, by anchoring the 3D dichalcogenide structures (CdIn₂S₄) elicited by a wet chemical route, hybrid BCN/CdIn₂S₄ nanostructures were obtained. The resulting BCN/CdIn₂S₄ (BCN–CIS3) nanostructures exhibited an excellent degradation efficiency (95%) for methyl orange (MO) compared to pristine g-C₃N₄ nanosheets (CN) (28%) and boron-doped g-C₃N₄ (BCN) (35%). All the optimized photocatalysts were thoroughly characterized using various techniques and investigated for comparative structural, optical, morphological, and catalytic properties. Our results reveal that introducing boron atoms into the lattice of g-C₃N₄ nanosheets leads to reduction in the band-gap energy and rapid electron transfer. The formation of heterojunctions with the 3D CdIn₂S₄ further assists in improving the degradation efficiency by minimizing the undesired electron–hole recombination, as confirmed by time-resolved photoluminescence (TRPL) analysis. This work proposes feasible strategies and their synergy to develop innovative materials for sustainable energy conversion and environmental remediation applications.     

Heterojunction architecture of Nb2O5/g-C3N4 for enhancing photocatalytic activity to degrade organic pollutants and deactivate bacteria in water

Water pollution has become a serious problem owing to the development of society. Photocatalysis is a promising approach to remove various pollutants in water, such as organic pollutants and antibiotic resistance bacteria. Meanwhile, the design of heterojunction between two semiconductors is an effective path to improve photocatalytic properties due to its potential in improving separation and transfer of photoinduced carriers. In this study, Nb₂O₅/g-C₃N₄ (NO/CN) composite materials were prepared through a one-step heating method. Characterizations confirmed successful preparation of NO/CN heterojunction structure and better optical properties than pure g-C₃N₄ and Nb₂O₅. NO/CN composite materials showed excellent photocatalytic efficiency for Escherichia coli (E. coli) inactivation (95%) compared with the pure Nb₂O₅ (10%) and g-C₃N₄ (77%). Meanwhile, NO/CN exhibited better organic pollutants removal (RhB for 94%, methyl orange (MO) for 15% and methylene blue (MB) for 87%) under visible light, which is likely owing to the heterojunction structure between g-C₃N₄ and Nb₂O₅ that leads to the good separation of photogenerated electron-hole pair. Free radical scavenging and electron spin resonance (ESR) experiments demonstrated that superoxide radicals (^?O₂^?) and holes (h⁺) were the dominant radicals. Therefore, the NO/CN was proposed to be a promising material for effective disinfection and removal of organic contaminants in water treatment.     

Acidification and bubble template derived porous g-C3N4 for efficient photodegradation and hydrogen evolution

Graphitic carbon nitride (g-C₃N₄) as a metal-free candidate of photocatalyst has received worldwide attention because of its great potentials in solar light-induced degradation and hydrogen evolution, yet the industrial application is seriously hindered by the small specific surface area and rapid recombination rate of carriers. Herein, we demonstrate that porous g-C₃N₄ (HCl-CNU-X) can be prepared via the co-polymerization of acidified melamine and a green bubble template (urea). Transmission electron microscopy and nitrogen sorption characterization results show that the prepared HCl-CNU-X possesses an in-plane porous structure and large specific surface area, enabling the exposure of more accessible active sites. As a result, HCl-CNU-X exhibits both enhanced photocatalytic tetracycline hydrochloride degradation and higher hydrogen evolution than bulk g-C₃N₄. The boosted photocatalytic performance was ascribed to the formation of the porous structure, which dramatically promotes the separation of charge-carriers and facilitates the electron transfer. This work demonstrates that the acidification of nitrogen-rich precursors combined with a bubble-template can develop a new paradigm of highly porous photocatalysts for environmental remediation and water splitting.     

凹凸棒石/g-C3N4-AgFeO2复合材料制备及其光催化性能

以凹凸棒石(简称凹土,ATP)为基体,通过原位化学法一步直接合成g-C_3N_4薄层材料,并将其有效固载于凹土表面(ATP/gC_3N_4),再通过原位沉淀法引入不同比例AgFeO_2纳米颗粒,构筑系列兼具磁分离特性和高效光催化活性的ATP/g-C_3N_4-AgFeO_2-Y复合光催化剂(Y=wATP/g-C_3N_4/(wATP/g-C_3N_4+wAg FeO_2)×100%,表示ATP/g-C_3N_4在ATP/g-C_3N_4-AgFeO_2复合材料中所占的质量百分数)。采用XRD、SEM、BET、UV-Vis、PL和ICP表征其结构和物化性能,以酸性红G(ARG)为目标降解物,研究其光催化性能。研究发现:通过形成Si-O-C键,g-C_3N_4薄层被均匀固定在凹土表面;AgFeO_2纳米颗粒均匀沉积于ATP/g-C_3N_4表面并形成Z型异质结,ATP/gC_3N_4-AgFeO_2-Y具有比ATP/g-C_3N_4和AgFeO_2更优异的可见光光催化性能,且随着ATP/g-C_3N_4含量的增大呈先升高而后下降的趋势;当Y=57%时复合材料的性能最佳,ATP/g-C_3N_4-AgFeO_2-57%对20 mg·L-1酸性红G的降解率可达97.4%,循环4次使用后,降解率仍保持94.2%。通过自由基捕获实验研究了光催化反应机理,发现·O2-是光催化过程的主要活性物种。     

Z-scheme TiO2/g-C3N4 composites prepared by hydrothermal assisted thermal polymerization with enhanced visible light photocatalytic activity

Melamine was added to the precursor of TiO₂, then TiO₂ prepared by hydrothermal, while melamine was modified. Subsequently, a series of Z-scheme TiO₂/g-C₃N₄ heterojunction composites were successfully synthesized by simple calcination. The morphology and structure of samples were characterized by XRD, FT-IR, UV–vis DRS, SEM, TEM, PL and BET. The photocatalytic activity of these samples has been investigated by degradation of Rhodamine B (RhB), and results indicated that photocatalytic activity of the as-prepared samples was greatly influenced by the content of titanium tetrabutoxide in precursors and the hydrothermal time. The degradation rate of TiO₂/g-C₃N₄-1 to RhB was the best, which was 5.05-fold of pure TiO₂ (19.61%) and 2.25-fold of bulk g-C₃N₄ (44.06%), respectively. The trapping experiment results showed that ^·O₂^? and h⁺ were main active species during degradation of RhB. The photocatalytic activity of the sample did not decrease significantly after 4 cycles. The unique Z-scheme heterojunction between TiO₂ and g-C₃N₄ improved photocatalytic activity of the samples under visible light.

     

Bi2WO6/g-C3N4复合型催化剂的制备及其可见光光催化性能

利用溶剂热法, 把Bi₂WO₆纳米颗粒植入g-C₃N₄层间和表面成功地制备了Bi₂WO₆/g-C₃N₄复合型光催化剂。通过XRD、SEM、TEM、BET和UV-Vis分别对样品的结构、组成、形貌、比表面积、光学性能进行了表征。结果表明, g-C₃N₄层状结构被部分剥离成碎片且与Bi₂WO₆纳米颗粒形成了复合物。Bi₂WO₆/g-C₃N₄复合型光催化剂与单一Bi₂WO₆相比不仅扩展了可见光的响应范围、增大了比表面还加速了光生电子与空穴的分离。结果表明, Bi₂WO₆的最佳负载量为60wt%时, 复合型光催化剂具有最高的可见光催化活性且性能稳定、易回收。     

Bi2WO6/g-C3N4复合型催化剂的制备及其可见光光催化性能

利用溶剂热法,把Bi2WO6纳米颗粒植入g-C3N4层间和表面成功地制备了Bi2WO6/g-C3N4复合型光催化剂。通过XRD、SEM、TEM、BET和UV-Vis分别对样品的结构、组成、形貌、比表面积、光学性能进行了表征。结果表明,g-C3N4层状结构被部分剥离成碎片且与Bi2WO6纳米颗粒形成了复合物。Bi2WO6/g-C3N4复合型光催化剂与单一Bi2WO6相比不仅扩展了可见光的响应范围、增大了比表面还加速了光生电子与空穴的分离。结果表明,Bi2WO6的最佳负载量为60wt%时,复合型光催化剂具有最高的可见光催化活性且性能稳定、易回收。