水热法制备铝合金超疏水表面及电化学性能研究

在金属表面构建超疏水膜层是一种有效的防腐技术,本文采用水热处理和自组装技术在铝合金表面构建了超疏水膜层来提升铝合金的耐蚀性能. 通过对不同水热时间下制备的铝合金超疏水表面的电化学性能以及表面形貌进行测试分析,发现当水热反应时间为6 h时,制备的超疏水铝合金超疏水性和电化学性能达到最佳,接触角能达到155.5^o,在模拟海水溶液中保护效率能达到99.6%.     

化学/电化学腐蚀法快速制备超疏水金属铝

提出一种金属铝超疏水表面的快速制作方法. 先以化学腐蚀在铝表面形成微米级粗糙结构, 再通过电化学腐蚀构筑纳米结构, 在20 min内完成了超疏水表面所需粗糙结构的制备. 这种化学腐蚀/电化学腐蚀两步法比单独化学或电化学腐蚀方法在时间上缩短了1~2个数量级, 且不受铝材晶形限制, 同时电化学腐蚀所用电流密度也降低了1个数量级, 降低了对电源设备的要求, 可望大规模应用于工业生产和其它金属的超疏水表面制备.     

铝合金表面原位自组装超疏水膜层的制备及耐蚀性能

采用阳极氧化法在铝合金表面原位构造粗糙结构, 经表面自组装硅氧烷后得到超疏水自清洁表面, 与水滴的接触角最大可达157.5°±2.0°, 接触角滞后小于3°. 通过傅立叶变换红外(FT-IR)光谱分析仪、场发射扫描电子显微镜(FE-SEM)、能谱仪(EDS)、原子力显微镜(AFM)和接触角测试对阳极氧化电流密度、硅氧烷溶液中水的含量和自组装时间等参数进行了分析, 并得到制备超疏水自清洁表面的最优工艺参数. FE-SEM及AFM的测试结果表明, 由自组装硅氧烷膜层的无序性形成的纳米结构和阳极氧化构造的微米级粗糙结构与硅氧烷膜层的低表面能的协同作用构成了稳定的超疏水表面. 电化学测试(动电位极化)的结果表明, 原位自组装超疏水膜层极大地提高了铝合金的耐蚀性.     

铝合金表面用化学刻蚀和阳极氧化法制备的超疏水膜层的耐蚀性能

通过化学刻蚀和阳极氧化在AA2024铝合金表面制备超疏水表面。当化学刻蚀时间超过3 min时,表面在很宽pH值范围内显示出水静态接触角大于150°。SEM和AFM照片表明化学刻蚀时间决定了试样表面形貌和粗糙度。FTIR用来研究氟硅烷(G502)与AA2024表面的结合。结果说明FAS(氟硅烷)分子与铝合金表面的三氧化二铝发生反应,并在阳极氧化膜层表面展示出优异的结合性能。超疏水表面的耐腐蚀性能通过在质量分数为3.5%的NaCl溶液中进行动电位极化和交流阻抗(EIS)测试。电化学测试结果和等效电路模型显示出超疏水表面显著改善抗腐蚀性能。     

喷砂-阳极氧化-氟化处理构筑铝合金超疏水表面

为研究复合法制备超疏水表面过程中主要工艺参数对表面形貌及超疏水性能的影响, 开发了一种喷砂-阳极氧化复合方法, 在铝合金表面构筑了微米-纳米二级结构, 经氟化处理后获得了超疏水特性. 结果表明, 喷砂处理在铝合金表面通过冲蚀的凹坑构筑出微米结构, 阳极氧化则在铝合金表面通过蜂窝状氧化膜构筑纳米结构. 但单纯构筑粗糙结构或单纯改变表面化学组成均不能在铝合金表面获得超疏水特性. 单纯的微米结构或纳米结构, 即使有低表面能聚合物修饰也不能获得超疏水特性. 只有微米-纳米二级结构和低表面能聚合物的协同作用, 才能有效构筑铝合金超疏水表面. 这种铝合金与水滴接触时, 形成的气阱可减小固体表面与水滴的接触面积, 降低表面与水滴间的热量交换, 从而减缓水分子的凝结, 提高铝合金的抗霜冻性. 同时, 气阱还可有效减缓海水的腐蚀, 提高铝合金的耐海水腐蚀性.     

含氟硅丙烯酸酯乳液超疏水膜中疏水基团的梯度分布与表面微观结构研究

利用含氟疏水基团的梯度分布,结合草莓形纳米SiO2粒子提供的双重粗糙表面,制备了具有类"荷叶效应"的超疏水涂膜,水接触角达(174.2±2)°,滞后角几乎接近0°.通过原子力显微镜、扫描电镜和水接触角的测试对膜表面形貌及疏水性能进行了表征;探讨了其表面微观结构与表面疏水性能的关系.草莓形复合粒子在膜表面的无规则排列赋予涂膜表面不同等级的粗糙度,使水滴与涂膜表面接触时能够形成高的空气捕捉率,这种微观结构与疏水基团的梯度分布相结合,赋予了含氟硅丙烯酸酯乳液涂膜表面超疏水性能.     

电化学阻抗谱法研究环氧膜的渗水机理

本工作测量了覆盖环氧膜的铝电极在NaCl溶液中的电化学阻抗谱, 并求得了该膜的膜电阻、膜电容和环氧膜与底金属间的腐蚀电阻及双电层电容。由膜电容求得该膜的介电常数为5.2。此种膜未浸入NaCl溶液前的介电常数为4.9。将上述数据与未覆盖环氧膜的铝电极的电化学阻抗数据比较, 可认为溶液是经上述膜中的化学通道而渗入膜内的。     

复合SiO2粒子涂膜表面结构及超疏水性能

采用溶胶-凝胶法制备不同粒径SiO₂粒子，通过表面改性得到不同形状复合粒子，并利用氟硅氧烷的表面自组装功能制备了具有“荷叶效应”的超疏水涂膜。通过原子力显微镜、扫描电镜和水接触角的测试对膜结构及性能进行了表征，探讨了SiO₂粒子的粒径和形状与表面微观结构、表面粗糙度和表面疏水性能的关系。结果表明含单一粒径粒子涂膜表面水接触角符合Wenzel模型，而复合粒子构成了符合Cassie模型的非均相界面;单纯的粗糙度因子不能反映水接触角的变化，复合粒子在膜表面的无规则排列赋予涂膜表面不同等级的粗糙度，使得水滴与涂膜表面接触时能够形成高的空气捕捉率和较小的粗糙度因子;其与在涂膜表面能形成自组装分子膜的氟硅氧烷共同作用赋予了涂膜超疏水性能，而这种超疏水性能与复合粒子的粒径大小和形状基本无关。     

基于热模塑法制备HDPE仿生超疏水表面

研究了热模塑法在制备超疏水高密度聚乙烯(HDPE)膜中的应用。以高岭土增强的聚二甲基硅氧烷(PDMS)为软模板,采用热模塑技术,将荷叶表面的微结构信息复制到HDPE膜表面。接触角测量结果显示,10%掺杂量的PDMS软模板复制得到的HDPE膜表面,与水的接触角高达156°,呈现超疏水性。扫描电镜照片显示,PDMS软模板具有与荷叶表面互补的"负型结构",而HDPE膜表面则具有与荷叶类似的微米—纳米复合粗糙结构。此法无需溶剂,可推广制备其它热塑性高聚物的超疏水表面。     

铝合金表面超疏水涂层的制备及其耐蚀性能

基于含氟聚氨酯和纳米SiO₂的协同作用, 在铝合金表面成功制备了一层超疏水涂层. 用红外光谱、扫描电镜和电化学测试等技术对超疏水涂层进行了表征和分析. 红外光谱结果表明, 硅烷偶联剂(A1100)成功键合到纳米SiO₂表面. 扫描电镜和接触角测定仪对涂层的表面形貌表征结果表明, 涂层表面存在微米鄄亚微米尺度的粗糙结构, 接触角可达到156°, 滚动角小于5°. 电化学测试(交流阻抗和极化曲线)结果表明, 所得到的涂层极大地提高了铝合金的耐蚀性能.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.