分子识别中质子客体的荧光传感和开关研究进展

分子识别是超分子化学的核心概念 ,而荧光开关PET体系又是分子识别中的重要组成部分 ,是超分子化学和光物理学科相结合的成就 ,作为一种全新的客体识别分析手段由于其独特的应用价值 ,近十年以惊人的速度在向前发展。本文综合 1 998年以前的文献对质子客体的荧光开关PET体系进行了全面介绍。     

有机-无机纳米复合材料光谱与电子性质研究进展

有机-无机纳米复合材料的研究在当前纳米科学技术的发展中占有重要地位，开创了材料与催化科学研究的新纪元。自从10年前首次合成纳米孔无机材料MCM-41至今，该领域研究不断深入，已展现出广阔的应用前景。当客体有机分子分散于纳米孔道内部时，其分子性质将产生明显变化。本文结合作者近期研究成果，力图从实验与理论两方面阐明在纳米复合体系中客体分子性质变化的原因。     

以钴-哒嗪阳离子为模板构筑的多酸基有机-无机杂化材料

利用水热方法合成了一种Keggin型多酸基有机无机杂化材料,化学式为(Hpydz)Na[Co(pydz)_4(H_2O)_2][SiW_(12)O_(40)]·3H_2O(pydz=pyridazine).单晶X-射线研究表明,在该化合物中,Keggin型多阴离子与钠离子连接构筑成三维孔状结构,其中钴-哒嗪阳离子有机基团作为客体分子,通过静电相互作用存在于三维孔道结构中,构筑成有机-无机杂化材料.该化合物属于单斜晶系,空间群为C_2/c,晶胞参数a=1.937 7(2)nm,b=1.678 8(2)nm,c=1.768 0(2)nm,α=90°,β=98.612(3)°,γ=90°,V=5.686 51nm~3.     

环糊精和环糊精包合物

本文作者结合自已的工作，扼要介绍了环糊精化学几个主要领域的研究概况，着重叙述了环糊精的包合作用与环糊精的修饰，描绘了环糊精化学的发展前景。     

客体小分子在超分子有机凝胶体系中的扩散释放

采用二(4-硬脂酰胺基苯基)甲烷(BSAPM)为凝胶剂制备了含有小分子水杨酸和若丹明B的1,1,2-三氯乙烷(TCE)超分子有机凝胶. 以超分子有机凝胶作为主体, 客体小分子水杨酸和若丹明B可轻微降低超分子有机凝胶的相转变温度(T_GS). 用紫外-可见光度法研究了超分子凝胶中两种客体小分子在静态下的扩散释放. 结果表明其释放率随凝胶剂浓度的增加而降低. 客体小分子的体积大小对其释放有明显的影响, 分子体积较大的若丹明B的释放率低于分子体积较小的水杨酸. 另外, 若丹明B的扩散系数也低于水杨酸, 且随凝胶剂浓度的增加, 这种趋势更为明显. 两种客体分子的累积释放率与时间的平方根成良好的线性关系, 符合Higuchi方程, 属扩散控制的Fickian释放机理.     

葫芦脲的研究进展

近几年葫芦脲和其衍生物由于其特殊的结构与性质已引起的密切关注。本文综述了葫芦脲的最新研究进展,包括葫芦脲分子及其衍生物的分子设计与合成,与聚电解质形成主链（准）聚轮烷和侧链（准）聚轮烷,与其他有机客体小分子相互作用形成轮烷和准轮烷,以及葫芦脲分子及其衍生物在囊泡、二维聚合物、色谱固定相、生物体以及药物缓释方面的最新应用。     

金属卟啉与咪唑类客体轴向配位反应的荧光性质研究

利用荧光光谱滴定法研究了3种金属卟啉与4种咪唑类分子进行的轴向配位反应,考察了对配位反应荧光性质的影响因素.结果表明,咪唑类客体与主体进行轴向配位反应时将产生荧光猝灭效应;取代基团位置对轴配物的荧光性质有较大影响;手性基团的引入导致轴配物S1态荧光强度降低.     

布洛芬与环糊精的主-客体相互作用

在298.15K下,用滴定式微量热法研究了布洛芬分别与α-、β、γ-环糊精在Tris-HCl缓冲溶液(pH=7.0)中的包合作用.实验测得了布洛芬.环糊精包合物的实验稳定常数、形成过程的标准焓变、标准吉布斯自由能变及标准熵变等热力学参数.结果表明:布洛芬与α-、β-肛环糊精的包合过程是焓、熵协同驱动的过程,而γ-环糊精与该药物包合则是熵驱动的.此外,B3LYP/6-31G*//PM3方法用来模拟布洛芬与环糊精的包合过程,计算结果表明布洛芬分子的憎水部分更易于从大口进入环糊精分子的空腔.     

多种优化试剂显现潮湿纸张表面潜在手印的比较研究

复杂条件下潜在手印的发现及显现提取一直以来是刑事技术领域研究的热点和难点,尤其是潮湿或水中浸泡客体表面的潜在手印,往往因为环境条件的影响而无法使用常规的显现方法。因此,对于这类疑难条件下潜在手印的显现研究成为亟待解决的问题。本文分别对比了尼罗红、尼罗蓝、物理显影液三种可用于潮湿客体表面潜在手印显现的优化试剂,并对其可靠性、灵敏度及使用条件进行了详细的论证分析,为实战工作中疑难条件下潜在手印的显现提出了可靠的处理方法。     

主-客体络合物稳定常数的曲线拟合处理

利用曲线拟合法以处理圆二色谱法谱滴定的实验数据,可以给出更为可靠的主－客休络合物的络合稳定常数,与常用的Ｂｅｎｅｓｊ－Ｈｉｌｄｅｂｒａｎｄ方程所得结果比较表明,当络合物稳定常数较大（〉５０００）时,应该使用曲线拟合法。     

Preparation,Characterization and Optical Properties of Hostguest Nanocomposite Material Mordenite—silver Iodide

Silver iodide nanoclusters were successfully prepared in the channels of mordenite by a heat diffusion method.Powder X-ray diffraction.adsorption technique and infrared spectroscopy were used to characterize the prepared materials,which showed that the guest silver iodied had been encapsulated in the channels of mordenite.The optical properties of the solid phase diffuse reflectance absorption of nanocomposite material NaM-AgI were studied,showing that the absorption bands of the diffuse reflectance absorption of the prepared material moved to the region of high energy.The absorption peak of the material prepared shifted to the region of high energy.Namely,blue shift was caused.This has demonstrated the incorporation of silver iodide into the channels of the zeolite.We observed the luminescence and surface photovoltage spectra of NaM-AgI sample,proposing the mechanisms of the photoluminescence and photovoltaic responses.     

Luminescence of ordered silver iodide nanoclusters inside zeolite host

Ordered silver iodide nanoclusters inside zeolite Y host were prepared by using a thermal diffusion method. The Y-AgI samples were characterized with powder X-ray diffraction, differential thermal analysis, X-ray photoelectron spectroscopy, adsorption technique and chemical analysis. The results show that silver iodide nanoclusters were situated in the ordered cages of the zeolite Y host. The results on the luminescence of the nanocomposites Y-AgI suggest that when the sizes of silver iodide nanoclusters are were very small, non-radiation surface recombination exceeds radiation process and the luminescence efficiency increases as the size of the silver iodide nanoclusters increaseds As the sizes of AgI nanoclusters increased, non-radiative surface recombination effect become equal to the radiation effect of the excitons. As the size of the nanoclusters of AgI in zeolite host further increases, the surface recombination of the nanoclusters becomes a major process.     

纳米MCM-41组装DBC-偶氮胂的研究

以纳米MCM-41孔道为模版,组装制备了二溴对氯偶氮胂(DBC-ASA)纳米簇合物。采用化学分析、粉末X-射线衍射、77 K N2吸附-解吸附、红外光谱、固体扩散漫反射光谱及发光光谱表征了制备的(MCM-41)-(DBC-ASA)主-客体纳米复合材料。结果表明,DBC-ASA成功地组装在了主体MCM-41中,并且处于主体分子筛材料的纳米孔道中。(MCM-41)-(DBC-ASA)纳米复合材料具有作为发光材料的应用前景。     

(SBA-15)-ZnS主-客体纳米复合材料的制备与表征

本研究在SBA-15分子筛孔道中制备了纳米ZnS。Zn_{2+首先通过离子交换交换到SBA-15中,通过水热法在SBA-15分子筛孔道中制备了纳米ZnS。(SBA-15)-ZnS复合物由粉末X-线衍射,傅立叶变换红外光谱,低温氮气吸附-解析附技术,固体扩散漫反射光谱以及发光研究进行了表征。粉末X-线衍射研究说明在制备主-客体纳米复合材料中分子筛骨架未被制备过程所破坏,保持完整且结晶度仍很高。傅立叶变换红外光谱表明制备的材料骨架完好。77 K低温氮气吸附-解析附研究表明所制备的复合材料孔体积,孔尺寸以及表面积相对于SBA-15分子筛降低,证明客体ZnS已成功地组装入分子筛孔道中。所制备的纳米复合材料固体扩散漫反射吸收光谱相对于体相ZnS显示出蓝移表明,ZnS已限制在分子筛的孔道中且复合材料中分子筛的孔道对ZnS具有明显的立体限域效应,ZnS成功地组装在SBA-15分子筛的孔道中。发光研究表明,(SBA-15)-ZnS样品出现明显发光现象。主-客体复合材料具有良好的发光性能,有望在发光材料领域中获得应用。}     

Preparation, characterization and optical properties of lanthanum-(nanometer MCM-41) composite material

Nanometer MCM-41 molecular sieve was prepared under a base condition by using cetyltrimethylammonium bromide as template and tetraethyl orthosilicate as silica source by means of hydrothermal method. Lanthanum(III) was incorporated into the nanometer MCM-41 by a liquid phase grafting method. The prepared nanocomposite materials were characterized by means of powder X-ray diffraction, spectrophotometric anaylsis, Fourier transform infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid diffuse reflectance absorption spectra and luminescence. The powder X-ray diffraction studies show that the nanometer MCM-41 molecular sieve is successfully prepared. The highly ordered mesoporous two-dimensional hexagonal channel structure and framework of the support MCM-41 is retained intact in the prepared composite material La-(nanometer MCM-41). The spectrophotometric anaylsis indicates that lanthanum exists in the prepared nanocomposite materials. The Fourier transform infrared spectra indicate that the framework of the MCM-41 molecular sieve still remains in the prepared nanocomposite materials and some framework vibration peaks show blue shifts relative to those of the MCM-41 molecular sieve. The low temperature nitrogen adsorption-desorption indicates that the guest locates in the channel of the molecular sieve. Compared with bulk lanthanum oxide, the guest in the channel of the molecular sieve has smaller particle size and shows a significant blue shift of optical absorption band in solid diffuse reflectance absorption spectra. The observed blue shift in the solid state diffuse reflectance absorption spectra of the lanthanum-(nanometer MCM-41) sample show the obvious stereoscopic confinement effect of the channel of the host on the guest, which further indicates the successful encapsulation of the guest in the host. The La-(nanometer MCM-41) sample shows luminescence.     

Preparation and Optical Properties of (Nanometer MCM-41)-CdS Composite Materials

The nanometer and micrometer molecular sieves MCM-41 were prepared by a hydrothermal method. Cadmium (II) was exchanged into the molecular sieves by ion-exchange, and thioacetamide was then used as a precursor of hydrogen sulfide for sulphidizing the (MCM-41)-cadmium samples to prepare the host-guest composite materials (MCM-41)-CdS. By means of chemical analysis, powder X-ray diffraction, infrared spectroscopy, low temperature nitrogen adsorption-desorption technique, solid state diffuse reflectance absorption spectroscopy and luminescence, the prepared materials were characterized. The chemical analysis shows that the guest is successfully trapped in the molecular sieves. The powder X-ray diffraction suggests that the frameworks of the molecular sieves in the prepared host-guest composite materials are retained during the preparative process. They are intact and the degrees of crystallinity are still very high. The infrared spectra show that the frameworks of the prepared host-guest materials keep intact. The low temperature nitrogen adsorption-desorption studies indicate that the pore volumes, the pore sizes and the surface areas of the prepared composite materials decrease relative to those of the MCM-41 molecular sieve hosts. This shows that the guests are successfully encapsulated in the channels of the molecular sieves. The solid state diffuse reflectance absorption spectra of the prepared host-guest composites show some blue-shifts relative to that of bulk cadmium sulfide, indicating that the guests are trapped in the channels of the molecular sieves. This shows the obvious stereoscopic confinement effect of the molecular sieve host on the nanometer cadmium sulfide guest. The (nanometer MCM-41)-CdS and (micrometer MCM-41)-CdS samples show obvious luminescence.     

Nanosized composites of synthetic zeolites and silver iodide as potentially electrochemically active materials

Zeolitic composite materials made up of silver iodide and potassium form of synthetic zeolites ZSM5 were prepared in different conditions. The composites were characterized by X-ray powder diffraction methods and their electrochemical properties were studied by conductivity measurements. The attention was focused on the composites of synthetic zeolite of ZSM5 and AgI prepared by treating a silver form of synthetic zeolite ZSM5 (Ag-ZSM5) with potassium iodide solution. On the basis of the ac conductivity data it has been inferred that AgI forms a thin conductive crystalline shell on the surface of the K-ZSM5 particles. The sharp conductivity change between 142 and 147 °C is due to AgI undergoing a phase transition from hexagonal to cubic symmetry at 146 °C. The electrochemical properties of the composites depend on the mode of preparation and on the subsequent thermal treatments.     

Er3+/Yb3+共掺纳米In2O3的制备及上转换发光

用低温溶剂热法以乙二醇为溶剂合成了Er3+和Yb3+共掺的In2O3纳米晶。用X射线衍射(XRD)、透射电镜(TEM)、漫反射光谱和上转换发光光谱对样品进行了分析。XRD和TEM结果表明,产物为纯的立方相In2O3结构,粒径约为30 nm;漫反射光谱显示了In2O3∶Er3+,Yb3+纳米晶在522、653和975 nm附近有3个吸收带;在980 nm近红外光激发下,样品发射出中心波长为525及555 nm的绿光和662 nm的红光,分别对应于Er3+的2H11/2→4I15/2、4S3/2→4I15/2和4F9/2→4I15/2跃迁;研究了Er3+和Yb3+离子的不同掺杂浓度对发光强度的影响,确定了Yb3+和Er3+离子的最佳掺杂浓度均为3%;双对数曲线显示绿光和红光的发射过程均为双光子吸收过程,对样品的上转换发光机制进行了初步讨论。     

Preparation and Characterization of a Composite of Silver Iodide and Synthetic Mordenite

A composite material made up of AgI and the potassium form of mordenite has been prepared by treating the silver form of synthetic mordenite with potassium iodide. The composite as well as the silver and potassium forms of mordenite have been characterised by X-ray powder diffractometry, X-ray photoelectron spectroscopy, EDS analyses and ac conductivity measurements. It has been inferred that, in the composite material, AgI grows at the entrance of the zeolite channels without forming a continuous conducting phase. The silver form of mordenite has been proved to be a silver ion conductor by dc conductivity measurements.     

Composite Materials of Synthetic Mordenite and AgI

Composite materials made up of silver iodide and synthetic mordenite in sodium Na-MD or potassium form K-MD have been prepared by sintering a mixture of silver iodide and Na-MD or K-MD, by modified way of preparation. The prepared composites Na-MD/AgI and K-MD/AgI were characterised by X-ray powder diffractometry and thermal analysis. By integrating certain X-ray peaks quantitative reaction values were obtained. The composite Na-MD/AgI with 19 wt% of AgI content was also characterised by EDS analysis and ac conductivity measurements.