Manual and fia methods for the determination of cadmium with malachite green and iodide

A sensitive and rapid spectrophotometric method for the determination of cadmium is described, based on the formation of a blue complex at pH 4 between the anionic iodide complex of cadmium(II) and Malachite Green; the colour is stabilized with poly(vinyl alcohol). The calibration graph for measurement at 685 nm is linear over the range 1-50 mug of cadmium per 25 ml of final solution, with a relative standard deviation of +/-1.7% for 1 mug/ml cadmium. The molar absorptivity is 6.1 x 10(4) 1.mole(-1).cm(-1). The method can be successfully adapted for FIA, the peak height being proportional to the cadmium concentration over the range 0.1-3 mug/ml; a two-channel manifold is used and an improvement in selectivity is obtained. The use of a gradient tube is demonstrated to give a good calibration for Cd(II) over the range 2 x 10(-2) -2 x 10(-6)M.     

Spectrophotometric determination of micro amounts of cadmium in waste water with cadion and triton X-100

A spectrophotometric method for determination of micro amounts of cadmium in waste water with Cadion and Triton X-100 is described. The interference of foreign ions can be eliminated by masking with an ascorbic acid-Rochelle salt-potassium cyanide-potassium fluoride mixture. After demasking with formalin, cadmium is determined directly in aqueous solution without separation. Beer's law is obeyed for 0-8 mug of Cd in 25 ml of solution. The method is more sensitive than the dithizone method, its apparent molar absorptivity at 480 nm being 1.19 x 10(5) 1. mole(-1). cm(-1). Results obtained by using the proposed method on waste water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Simultaneous determination of manganese and zinc in mixtures using first- and second-derivative spectrophotometry

A new direct spectrophotometric determination of manganese with 5,8-dihydroxy-1,4-naphthoquinone (naphthazarin,NAZA) is reported. Absorption maximum, molar absorptivity and Sandell's sensitivity of 1:2 (M:L) complex are 695 nm, 1.88x10(4) l mol(-1) cm(-1) and 2.92 ng cm(-2), respectively. A linear calibration graph is obtained up to a concentration of 7.2 mug ml(-1) of manganese. The optimum range for determination (Ringbom) is between 0.20 and 6.8 mug ml(-1). A rapid method for simultaneous determination of manganese and zinc in their mixture using derivative spectra is described. The range 0.28-5.6 mug ml(-1) manganese could be determined in the presence of 0.33-6.8 mug ml(-1) zinc and vice versa. The developed method was applied to the simultaneous spectrophotometric determination of manganese and zinc in some synthetic mixtures and was found to give satisfactory results.     

Spectrophotometric determination of zinc with hydrazidazol in the presence of Triton X-100 and its application in metal analysis

A new spectrophotometric method for the determination of zinc is proposed. The chromogenic agent Hydrazidazol forms a 1:1 chelate with zinc in the presence of Triton X-100 in a medium containing 20-40% ethanol. The molar absorptivity and conditional formation constant have been found to be 2.7 x 1O(4) l.mole(-1).cm(-1) (at 640 nm) and 10(5.32) respectively. Beer's law is obeyed for zinc over the range of 0.2-0.8 mug/ml with a standard deviation of 0.024 mug/ml. The method can be applied to the determination of zinc in cadmium metal and its oxide after preconcentration by selective extraction of zinc thiocyanate into ethyl acetate in the presence of EDTA and thiosulphate as masking agents.     

Spectrophotometric determination of thallium after its extraction as an ion-pair of the chloro-complex and pyronine G

A sensitive and selective procedure for the spectrophotometric determination of thallium is described. The method is based on the formation of an ion-pair between [TlCl(4)](-) and the pyronine G cation in chloride-containing acid media. The ion-pair is extracted into benzene and permits the determination of as low as 0.3 mug of thallium in a final volume of 25 ml at 530 nm. The system obeys Beer's law in the concentration range 1-14 mug of thallium in a final volume of 25 ml. Potassium iodate was found to be highly effective for the oxidation of Tl(I) to Tl(III) and the presence of excess oxidant does not interfere. The method can be used for the determination of thallium in high purity cadmium, cadmium sponge and rock samples.     

Fluorimetric trace determination of cerium(III) with sodium triphosphate

Sodium triphosphate acts as a specific reagent for enhancing the fluorescence intensity of cerium(III). The purpose of this study was to investigate the spectrofluorimetric determination of trace amounts of Ce(III) in sodium triphosphate solution. The excitation and emission wavelengths are 303.5 nm and 353 nm respectively. Optimum sodium triphosphate concentration is found to be 0.074 g l(-1) at room temperature. The fluorescence varies linearly with the concentration of cerium(III) in the range 0.001-45 mug ml(-1). The detection limit is 9.4 x 10(-4)mug ml(-1). The relative standard deviations for 30 mug ml(-1) and 0.05 mug ml(-1) Ce(III) in 0.074 g l(-1) sodium triphosphate solution are 1.1% and 0.72% respectively. Quenching effects of other lanthanides and some inorganic anions are described. This method is a direct and rapid analytical method for the determination of Ce(III) in rare earth mixtures and cerium concentrates.     

Application of a microbial sensor to the quality control of meat freshness

Isosorbide dinitrate (ISDN) is reduced voltammetrically at gold working electrode surface in aqueous sodium sulfite solution and produces a voltammogram with its peak current proportional to the concentration of ISDN in the range of 1.3-2340 mug ml(-1). Sodium sulfite is used as supporting electrolyte and oxygen removing agent and, therefore, no nitrogen gas purging for elimination of soluble oxygen in, the sample solution is required. The limit of detection (LOD) of the method is 0.0838 mug ml(-1) and the relative standard deviation (R.S.D.) of 24 replicate determination of 52 mug ml(-1) of ISDN is 3.60%. The method is used for quantitative analysis of ISDN in arterial plasma, synthetic serum and pharmaceutical dosage form. The results are compared with those obtained from GC determination method. The method is sensitive and requires little sample preparation in a wide concentration range.     

A simple simultaneous flow injection method based on phosphomolybdenum chemistry for nitrate and nitrite determinations in water and fish samples

A direct spectrophotometric flow injection method for the simultaneous determination of nitrite and nitrate has been developed. The method is based on the oxidation of a phosphomolybdenum blue complex by the addition of nitrite and the decrease in absorbance of the blue complex is monitored at 820 nm. The injected sample is split into two segments. One of the streams was directly reacted with the above reagent and detected as nitrite. The other stream was passed through a copperised cadmium reductor column where reduction of nitrate to nitrite occurs, and the sample was then mixed with the reagent and passed through the cell of the spectrophotometer to be detected as nitrite plus nitrate. The conditions for the flow injection manifold parameters were optimised by experimental design and the concentration of nitrite and nitrate was determined in the linear range from 0.05 to 1.15 mug ml(-1) nitrite and 0.06 to 1.6 mug ml(-1) nitrate with a detection limit of 0.01 mug ml(-1) for nitrite and 0.025 mug ml(-1) for nitrate. The method is suitable for the simultaneous determination of nitrite and nitrate in fish and water samples with a sampling rate of 25+/-2 sample per hour.     

Automatic determination of cobalt at the submicrogram per millilitre level using a flowthrough spectrophotometric sensor

A flowthrough spectrophotometric sensor for the determination of cobalt at the nanogram per millilitre level using pyridoxal 4-phenylthiosemicarbazone as reagent and integrated preconcentration and detection in the flow cell is proposed. The method is highly selective for cobalt(II); it features detection and determination limits of 0.02 and 0.06 mug ml(-1) respectively, and a linear range of at least 0.04-18 mug ml(-1). The method is subject to very few interferences because the strongly acidic medium used prevents the formation of most complexes of the reagent with other metal ions. The method was applied to the determination of cobalt in pharmaceutical preparations.     

Permanganate-based chemiluminescence analysis of cefadroxil monohydrate in pharmaceutical samples and biological fluids using flow injection

A chemiluminescent method using flow injection is described for the determination of cefadroxil monohydrate. The method is based on the chemiluminescence reaction of cefadroxil with potassium permanganate in sulphuric acid, sensitized by quinine. The proposed procedure allows the determination of cefadroxil over the concentration range 0.1-30 mug ml(-1) with a detection limit of 0.05 mug ml(-1) and a sample measurement frequency of 150 samples h(-1). The method was successfully applied to the determination of cefadroxil in pharmaceutical preparations and biological fluids.     

Determination of clenbuterol in pharmaceutical preparations by reaction with o-phthalaldehyde using a flow-injection fluorimetric procedure

A new procedure for the determination of clenbuterol is proposed using flow-injection and fluorimetric detection. The method is based on the derivatization reaction of the primary amine group with o-phthalaldehyde in the presence of 2-mercaptoethanol. The calibration graph based on peak area was linear in the range 0.2-5 mug ml(-1) and the detection limit was 0.06 mug ml(-1). The method was validated using a reference spectrophotometric procedure and was applied to the determination of the drug in commercial pharmaceutical preparations.     

Determination of the plant growth regulator beta-naphthoxyacetic acid by micellar-stabilized room temperature phosphorescence

This paper presents a method for the determination of the plant growth regulator beta-naphthoxyacetic acid (NOA) by micellar-stabilized room temperature phosphorescence with the surfactant Triton X-100 (TX-100) as the micellar medium, thallium nitrate as the heavy atom and sodium sulphite as the oxygen scavenger. A multivariate optimization approach using the blocked cube star design of central composite was carried out. The analytical curve of NOA gives a linear dynamic range of 0.4-3.0 mug ml(-1) and a detection limit of 0.13 mug ml(-1). A recovery of 93.6% was obtained for 1 mug ml(-1) NOA in spiked apple samples.     

Spectrophotometric multicomponent determination of sunset yellow, tartrazine and allura red in soft drink powder by double divisor-ratio spectra derivative, inverse least-squares and principal component regression methods

Double divisor-ratio spectra derivative (graphical method), classical least-squares and principal component regression (two numerical methods) methods were developed for the spectrophotometric multicomponent analysis of soft drink powders and synthetic mixtures containing three colorants without any chemical separation. The graphical method is based on the use of derivative signals of the ratio spectra using double divisor. In this method, the linear determination ranges were 2-8 mug ml(-1) sunset yellow, 4-18 mug ml(-1) tartrazine and 2-8 mug ml(-1) allura red in 0.1 M HCl. In the numerical methods, a training set was randomly prepared by using 18 samples containing between 0 and 8 mug ml(-1) of sunset yellow, 0-18 mug ml(-1) of tartrazine and 0-8 mug ml(-1) of allura red. The chemometric calibrations were calculated by using the prepared training set and its absorbances at seven points (from 375.0 to 550.0 nm) in the spectral region 325-584 nm. The proposed methods were validated by using synthetic ternary mixtures and applied to the simultaneous determination of three colorants in soft drink powders. The obtained results were statistically compared with each other.     

Spectrofluorimetric study of the beta-cyclodextrin-ibuprofen complex and determination of ibuprofen in pharmaceutical preparations and serum

The inclusion complexation of ibuprofen in beta-cyclodextrin (beta-CD) has been examined by means of spectrofluorimetry at both acid and alkaline pH. The results suggest that stable 1:1 complexes are formed in both media. The analysis of the pK(a) values for ibuprofen in both the absence and presence of beta-CD (4.12 and 4.66, respectively) suggests that in the inclusion complex the carboxylic group is located outside the cyclodextrin (CD) but interacting with it. Further structural characterization of the complex was carried out by means of am1 semiempiral calculations. Based on the obtained results, a spectrofluorimetric method for the determination of ibuprofen in the presence of beta-CD at 10 degrees C was developed in the range of 4.7-58 mug ml(-1). Better limits of detection (1.6 mug ml(-1)) and quantification (4.7 mug ml(-1)) were obtained in this latter case with respect to those obtained in the absence of beta-CD. The method was satisfactorily applied to the quantification of ibuprofen in pharmaceutical preparations. A novel spectrofluorimetric determination of ibuprofen in the presence of beta-CD was also developed for serum samples at concentration levels between 5 and 70 mug ml(-1). It uses second-order fluorescence excitation-emission matrices coupled to an algorithm based on self-weighted alternating trilinear decomposition (SWATLD), and avoids resorting to separative instrumental analyses.     

Simultaneous determination of iron and zinc by pH gradient construction in a flow-injection system

A flow-injection method for the simultaneous determination of iron and zinc in the human hair with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) using a pH gradient technique has been developed. The linear range for the determination of iron is 0.1 approximately 1.8 mug ml(-1) and for zinc is 0.2 approximately 5.0 mug ml(-1). About 20 approximately 30 samples can be determined in 1 h. The proposed method is simple, rapid and accurate. It has been applied to the simultaneous determination of trace amounts of iron and zinc in the human hair with satisfactory results.     

Malachite green as a reagent for detection and spectrophotometric determination of chromium(VI)

A sensitive and inexpensive method of spectrophotometric determination of chromium(VI), based on the absorbance of its complex with malachite green and acetic acid at pH 2.5 is reported. The complex shows a molar absorptivity of 8 x 10(4) l.mole(-1) cm(-1) at 560 nm, using malachite green and acetic acid as reference solution. The effect of time, temperature, pH and reagent concentration is studied and optimum operating conditions are established. Beer's law is applicable in the concentration range 2.0-22.8 mug/ml chromium(VI). The resin beads act as a catalyst and as little as 1.6 mug of chromium(VI) is detected in the resin phase as compared to 4.1 mug in the solution phase. The standard deviation in the determinations is +/-0.40 mug/ml for a 10.35 mug/ml solution.     

Flow injection chemiluminescence determination of thiamine based on its enhancing effect on the luminol-hydrogen peroxide system

A new flow injection chemiluminescence (CL) method is proposed for the determination of thiamine, based upon its enhancing effect on the CL reaction of luminol with hydrogen peroxide in alkaline solution. The method allows the determination of thiamine within 0.05-8 mug ml(-1) range with a detection limit (3sigma) of 0.01 mug ml(-1). The relative standard deviation is 1.4% (n=11, 0.5 mug ml(-1) thiamine) and the sample throughput is about 90 samples h(-1). The method was successfully applied to the determination of thiamine in pharmaceutical preparations.     

Long-wavelength stopped-flow fluorimetric determination of lysozyme

The use of Cresyl Violet and sodium dodecyl sulphate for the kinetic fluorimetric determination of lysozyme from dynamic fluorescence measurements at a long wavelength in the range near 600 nm was explored. The high initial rate of this system allows analytical measurements to be made within ca. 2 s after the reactants are mixed, by using the stopped-flow mixing technique, which makes the method applicable to automatic routine analysis. The calibration graph is linear over the range 0.5-40 mug ml(-1) lysozyme hydrochloride and the detection limit of 0.19 mug ml(-1). The precision is less than 2% (relative standard deviation). The results obtained by applying the proposed method to the analysis of pharmaceutical samples with no pretreatment shown how readily it can be adapted for routine analyses. Analytical recoveries ranged between 94.0 and 104.0%.     

The use of phenylfluorone in the presence of cetylpyridinium chloride and Triton X-100 for the spectrophotometric determination of copper(II) in blood serum

A simple and sensitive spectrophotometric method for determination of copper(II) is based on the formation of a blue coloured complex of Cu(II) with 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF) in the presence of cetylpyridinium chloride (CP) and Triton X-100, has been developed. Optimum concentrations of PF, CP, Triton X-100 and pH ensuring maximum absorbance were defined. The complex Cu(II)-PF-CP-Triton X-100 shows maximum absorbance at 595 nm with a molar absorptivity value of 9.67x10(4) l mol(-1) cm(-1). The detection limit of the method is 0.028 mug ml(-1). Beer's law is obeyed for copper concentrations in the range 0.04-0.4 mug ml(-1). The studies of the effect of foreign ions on determination of copper, show that the selectivity of the method is poor. The cations of alkali metals and anions Br(-), Cl(-), I(-), F(-), NO(2)(-), NO(3)(-), CH(3)COO(-), SO(4)(2-), S(2)O(3)(2-), PO(4)(3-), citrates (examined in 1000-fold molar excess over copper) do not affect the determination. All cations forming complexes with PF have an interfering effect. The statistical evaluation of the method was carried out for six determinations using 10 mug of Cu and the following results were obtained: the standard deviation, SD=0.042, the confidence interval mu(95)=10.1+/-0.1 mug Cu. The method has been applied for determination of copper in blood serum.     

Flow-injection chemiluminometric analysis of some benzamides by their sensitizing effect on the cerium-sulphite reaction

A simple, highly sensitive chemiluminescent method using flow injection is described for the determination of three substituted benzamides, namely: sulpiride, sultopride and tiapride. The method is based on the sensitizing effect of these drugs on the chemiluminometric oxidation of sulphite by cerium(IV). The different experimental parameters affecting the chemiluminescence intensity were carefully studied and incorporated into the procedure. The method permits the determination of 0.05-2.5 mug ml(-1) sulpiride, 0.01-2.5 mug ml(-1) sultopride hydrochloride and 0.01-1.5 mug ml(-1) tiapride hydrochloride with minimum detectability of 0.01 mug ml(-1). The method was applied to the determination of these benzamides in pharmaceutical preparations and biological fluids.