Spectrophotometric determination of trace amounts of cadmium and zinc in waste water with 4-(2-pyridylazo)-resorcinol and mixed ionic and non-ionic surfactants

A spectrophotometric method for determination of trace amounts of cadmium and zinc in waste water with PAR and mixed ionic and non-ionic surfactants is described. The interferences of foreign ions can be eliminated by masking with a mixture of triethanolamine, potassium fluoride, ethylenediamine and sodium hexametaphosphate. By virtue of the difference between the absorbances before and after addition of a little sodium diethyldithiocarbamate, cadmium and zinc can be determined directly in aqueous solution without separation. Beer's law is obeyed for 0-20 microg of Cd or 0-12 microg of Zn in 25 ml of solution. The apparent molar absorptivities at 505 nm are 8.65 x 10(4) l.mole(-1).cm(-1) for Cd and 8.21 x 10(4) l.mole(-1).cm(-1) for Zn. Results obtained by applying the proposed method to waste-water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Development of highly sensitive cadmium iondashselective electrodes by titration method and its application to cadmium ion determination in industrial waste water

Characteristics of cadmium iondashselective electrode made cadmium sulphide (CdS)-silver sulphide (Ag(2)S) mixture were studied. CdS-Ag(2)S mixtures were obtained by gas/solid-phase reaction between silver-cadmium mixed powder and hydrogen sulphide gas (dry method) and by ionic reaction between cadmium-silver mixed ions and sulphide ion (wet method). As a result, it was found that the CdS-Ag(2)S mixture had to be made in the condition of excess existence of sulfur and had better regulate the excess sulfur quantity minimum, for the CdS-Ag(2)S pressed membrane gave a good Nernstian response against the cadmium ion concentration change. As the best way, CdS-Ag(2)S mixture was obtained by adding sulphide ion solution to 5 mol% cadmium ion and 95 mol% silver ion mixed solution while measuring silver sulphide (Ag(2)S) electrode potential as an indicator electrode. According to the reaction was stopped when the potential variation from the initial potential in the sulphide ion solution reached at 87-116 mV which the sulphide ion concentration became 10(-3) - 10(-4) of the initial concentration, the cadmium ion membrane pressed diameter of 8 mm and thickness of 2 mm showed a Nernstian response from 10(-8) to 10(-1) M of cadmium ion concentration. Furthermore, aiming to its application for industrial waste water, masking buffer for interfering metal ions such as lead ion (Pb(2+)) and copper ion (Cu(2+)), which were possibly coexisted and to adjust total ionic strength and pH of sample was developed. The present Cd(2+) iondashselective electrode was applied to the determination of Cd(2+) in the industrial waste water. The good regression line with correlation factor of 0.984 was obtained compared with the conventional atomic absorption spectroscopy.     

Zincsulphate induced metallothionein in pancreatic islets and protected against the diabetogenic toxin streptozotocin

A new azoamino reagent amido black diazoaminoazobenzene (ABDAB) has been synthesized, and found to be a good chromogenic reagent for cadmium. In pH 10.4 Na(2)B(4)O(7)NaOH buffer solution cadmium reacts with ABDAB to form an orange-red chelate (1:2), exhibiting an absorption maximum at 520 nm. The apparent molar absorptivity is 1.62x10(5) l mol(-1) cm(-1). Beer's law is obeyed in the range 0-8 mug/25 ml Cd. The method is simple and rapid, with high sensitivity and good selectivity and is applied to the determination of trace amounts of cadmium in waste water and metal materials with satisfactory results.     

Preconcentration and flame atomic absorption spectrometry determination of cadmium in mussels by an on-line continuous precipitation-dissolution flow system

A rapid, sensitive, accurate and precise flame atomic absorption method is described for the determination of cadmium in mussels. The method is based on the continuous precipitation of cadmium as an ion pair between tetraiodocadmate and quinine and dissolution of the precipitate with ethanol. The metal can be preconcentrated 32-fold using 15 ml of sample solution by using a time-based technique at a sampling flow rate of 3.0 ml min(-1). The proposed method allows the determination of cadmium in the range 0.25-5.5 mug g(-1). The precision (relative standard deviation) obtained for different amounts of cadmium is in the range 1.5-4.7% at the 0.25-5.0 mug g(-1) level. The method demonstrates high tolerance to interferences, and the data obtained are in agreement with the certified value of a selected reference material. This procedure was applied to the determination of cadmium in mussel samples from estuaries in Galicia (Spain).     

Determination of trace cadmium in waters by flame atomic absorption spectrophotometry after preconcentration with 1-nitroso-2-naphthol-3,6-disulfonic acid on Ambersorb 572

A procedure for the determination of trace amount of cadmium after adsorption of its 1-nitroso-2-naphthol-3,6-disulfonic acid chelate on Ambersorb 572 has been proposed. This chelate is adsorbed on the adsorbent in the pH range 3-8 from large volumes of aqueous solution of water samples with a preconcentration factor of 200. After being sorbed, cadmium was eluted by 5 mL of 2.0 mol L(-1) nitric acid solution and determined directly by flame atomic absorption spectrophotometery (FAAS). The detection limit (3sigma) of cadmium was 0.32 microg L(-1). The precision of the proposed procedure, calculated as the relative standard deviation of recovery in sample solution (100 mL) containing 5 microg of cadmium was satisfactory (1.9%). The adsorption of cadmium onto adsorbent can formally be described by a Langmuir equation with a maximum adsorption capacity of 19.6 mg g(-1) and a binding constant of 6.5 x 10(-3) L mg(-1). Various parameters, such as the effect of pH and the interference of a number of metal ions on the determination of cadmium, have been studied in detail to optimize the conditions for the preconcentration and determination of cadmium in water samples. This procedure was applied to the determination of cadmium in tap and river water samples.     

Determination of chromium in waste-water and cast iron samples by fluorescence quenching of rhodamine 6G

A new simple, selective and sensitive fluorescence quenching method was developed to determine chromium with rhodamine 6G. The method is based on the oxidation of rhodamine 6G by chromium(VI) in sulfuric acid solution. The linear calibration graph was obtained in the range 8-80 ng ml(-1) chromium(VI). The detection limit is 0.8 ng ml(-1). The method was applied successfully to the determination of chromium in waste water and cast iron samples.     

Flow-injection analysis-spectrophotometric determination of nitrite and nitrate in water samples by reaction with proflavin

A flow-injection manifold is proposed for determination of nitrite based on the reaction with 3,6-diamino acridine (proflavin sulfate) in hydrochloride acid medium. The assembly is adapted for nitrate determination by including a reductive column filled with copperized cadmium. The influence of foreign substances is also studied. The method gives a linear calibration graph over the range 0.06-4 mg 1(-1) nitrite, with an RSD <0.5%. The method was applied to nitrite and nitrate determinations in either waste water or coastal marine water samples.     

显色剂4-氯-2-磺酸基苯基重氮氨基偶氮苯的合成及其与Cd(II)显色反应的研究及应用

研究了显色剂4-氯-2-磺酸基苯基重氮氨基偶氮苯(CSDAA)的理化性质及其与Cd(Ⅱ)的高灵敏度显色反应。在TritonX-100存在下,于pH10.6的氨水-氯化铵缓冲介质中,该试剂与Cd(Ⅱ)形成31的红色络合物,最大吸收波长位于521nm处,Cd(Ⅱ)在0～20μg/25ml内符合比耳定律,表观摩尔吸光系教为2.0×10     

Manual and fia methods for the determination of cadmium with malachite green and iodide

A sensitive and rapid spectrophotometric method for the determination of cadmium is described, based on the formation of a blue complex at pH 4 between the anionic iodide complex of cadmium(II) and Malachite Green; the colour is stabilized with poly(vinyl alcohol). The calibration graph for measurement at 685 nm is linear over the range 1-50 mug of cadmium per 25 ml of final solution, with a relative standard deviation of +/-1.7% for 1 mug/ml cadmium. The molar absorptivity is 6.1 x 10(4) 1.mole(-1).cm(-1). The method can be successfully adapted for FIA, the peak height being proportional to the cadmium concentration over the range 0.1-3 mug/ml; a two-channel manifold is used and an improvement in selectivity is obtained. The use of a gradient tube is demonstrated to give a good calibration for Cd(II) over the range 2 x 10(-2) -2 x 10(-6)M.     

Preparation of a new Cd(II)-imprinted polymer and its application to determination of cadmium(II) via flow-injection-flame atomic absorption spectrometry

A new cadmium(II)-imprinted polymer based on cadmium(II) 2,2′-{ethane-1,2-diylbis[nitrilo(E)methylylidene]} diphenolate-4-vinylpyridine complex was obtained via suspension polymerization. The beads were used as a minicolumn packing for flow-injection-flame atomic absorption spectrometry (FI-FAAS) determination of cadmium(II) in water samples. Sorption effectiveness was optimal within pH range of 6.6-7.7. Nitric acid, 0.5% (v/v) was used as eluent. Fast cadmium(II) sorption by the proposed material enabled to apply sample flow rates up to 10 mL min⁻¹ without loss in sorption effectiveness. Enrichment factor (EF), concentration efficiency (CE) and limit of detection (LOD, 3σ) found for 120-s sorption time were 117, 39.1 min⁻¹ and 0.11 μg L⁻¹, respectively. Sorbent stability was proved for at least 100 preconcentration cycles (RSD = 2.9%). When compared to non-imprinted polymer the new Cd(II)-imprinted polymer exhibited improved selectivity towards cadmium(II) against other heavy metal ions, especially Cu(II) and Pb(II), as well as light metal ions. Accuracy of the method was tested for ground water and waste water certified reference materials and fortified water. The method was applied to Cd(II) determination in natural water samples.     

碳酸镉饱和溶液作标准用便携式AAS测定镉的研究

以CdCO3固体溶于煮沸冷却的去离子水中配制成饱和溶液,将该饱和溶液稀释成标准溶液系列用于便携式钨丝电热原子吸收光谱仪野外实时与在线分析环境水样中痕微量镉。经测定在25℃该饱和溶液中镉的浓度为272μg.L-1,与理论计算值279μg.L-1有很好的吻合。实验优化了相关的仪器条件和实验条件,在最优的条件下该方法的线性相关系数为0.9948,检出限为0.08μg.L-1。通过检测分析环境中的水样验证了该方法是可行的。     

Direct determination of cadmium in calcium drug samples using electrothermal atomic absorption spectrometry with a metal tube atomizer and thiourea as a matrix modifier

A laboratory constructed molybdenum tube atomizer was used for direct determination of trace cadmium in drug samples by the electrothermal atomic absorption spectrometric (ETAAS) method. An ultrasonic agitation method for a solution including the sample powder was used. A calibration curve was constructed with a cadmium standard solution including matrix. To eliminate interference from other matrix elements, a chemical modifier thiourea, was used. The detection limit were 17 pg ml(-1) (3 S/N), and the RSD of the direct analysis was 5-17%. The results for cadmium in the four drug samples analysed by the direct ETAAS method matched well with those obtained with nitric acid digested samples. The recovery of added cadmium was 103-106%. An accurate method is elaborated for the determination of cadmium in drug samples by direct ETAAS techniques. The merits of this method are rapid calibration, simplicity, fast analysis, and low cost.     

原子捕集火焰原子吸收法测定水中镉

采用自制原子捕集装置，选择了镉在不锈钢管上捕集的合适条件，使测镉的灵敏度比常规火焰原子吸收法提高了116倍。应用于工业废水中痕量镉的测定，获得满意结果。     

On-line precipitation–dissolution in knotted reactor for thermospray flame furnace AAS for determination of ultratrace cadmium

A simple, environmentally friendly, cost-effective and sensitive method was developed for the determination of trace cadmium in rice and water by using flow injection (FI) on-line precipitation–dissolution in a knotted reactor (KR) as a preconcentration scheme for thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). The preconcentration was achieved by online merging the sample solution and the precipitating reagent in a KR and subsequently eluting the resultant precipitate of cadmium hydroxide with 1 mol/L HNO₃. The eluant was then introduced into TS-FF-AAS for the determination. A self-assembled FI system was employed to hyphenate the KR system with TS-FF-AAS. Under optimal chemical and instrumental conditions, a limit of detection of 0.04 μg/L and a sensitivity enrichment factor of 34 for cadmium was obtained with a total initial sample volume of 4 mL. The proposed method was applied to the determination of cadmium in certified reference rice and water samples with analytical results in good agreement with their certified values. Real rice samples and real water samples were also determined by the proposed method, with analytical results confirmed by inductively coupled plasma mass spectroscopy (ICP-MS).     

Some azo-dye reagents for the spectrophotometric determination of cadmium

2-[2-(5-Bromopyridyl)azol-4,5-dimethylphenol (BrPDMP) and 2-[2-benzothiazolylazo)-5-dimethylaminophenol (BTADAP) have been synthesised and compared, as reagents for cadmium, with the related dyes BrPADAP and BTDMP. The new dyes both form stable highly coloured 2:1 complexes with cadmium, with molar absorptivities (in o-xylene solution) of 3.8 x 10(4) 1.mole(-1).cm(-1) at 590 nm (BrPDMP) and 4.5 x 10(4) 1.mole(-1).cm(-1) at 600 nm (BTADAP). Cadmium can be determined by extraction under alkaline conditions with a solution of BTADAP in xylene. Beer's law is obeyed up to at least 16 mug of cadmium. A limit of detection of 0.15 mug has been estimated and a coefficient of variation of 3.3% at the 5 mug level was found. The only species which interfere seriously are Co(2+), Ni(2+), and Ca(2+). A 200-fold excess of zinc may be tolerated. The method has been applied to the determination of cadmium in water samples, plant materials and hair. Interferences were overcome by preliminary extraction into Aliquat/carbon tetrachloride. The acid dissociation constant of BTADAP (pK = 9.5) and formation constant of the cadmium-BTADAP complex (log beta = 15.1) have been determined.     

Determination of phenol by flow-injection with chemiluminescence detection based on the hemin-catalysed luminol-hydrogen peroxide reaction

This study established a novel flow injection (FI) methodology for the determination of phenol in aqueous samples based on luminol chemiluminescence (CL) detection. The method was based on the inhibition that phenol caused on the hemin-catalysed chemiluminescence reaction between luminol and hydrogen peroxide in alkaline solution. Optimum conditions and possible mechanisms have been investigated. The linear range was 2.0×10(-9) to 4.0×10(-7)gmL(-1) for phenol. The proposed method is sensitive with a detection limit of 4.0×10(-10)gmL(-1). The relative standard deviation for 11 measurements was 2.3% for 1.0×10(-7)gmL(-1) phenol. The method was applied for the determination of phenol in waste water samples. The results obtained compared well with those by an official method.     

Preconcentration and determination of cadmium by GFAAS after solid-phase extraction with synthetic zeolite.

The solid-phase extraction (SPE) method for the preconcentration of trace amounts of cadmium using synthetic zeolite A-4 and its determination by graphite furnace atomic absorption spectrometry (GFAAS) was investigated. The preconcentration conditions, such as the optimum pH range of the sample solution for the adsorption of cadmium and the kind of acid solution for dissolving the cadmium-adsorbed synthetic zeolite A-4, as well as the measurement conditions for the determination of cadmium by GFAAS, e.g., the ashing and atomizing temperature, were investigated. Quantitative recovery of cadmium onto zeolite A-4 from the sample solution over the pH range 2.0 - 9.0 was achieved by the batch method. After the solid-phase (cadmium-adsorbed zeolite A-4) was separated from the sample solution by a membrane filter, it was dissolved in 2.0 cm(3) of 2.0 mol dm(-3) nitric acid. An aliquot of the resulting solution was injected into the graphite furnace. In GFAAS measurements an alternate gas (Ar, 90%; O(2), 10%) was used as a sheath gas, and the ashing temperature and atomizing temperature were 400 degrees C and 1600 degrees C, respectively. The detection limit (3 sigma) for cadmium was 0.002 microg dm(-3). The relative standard deviation at 0.010 microg dm(-3) was 3.5 - 4.5% (n = 5). The proposed method has been successfully applied to the analysis of trace cadmium in environmental water samples.     

Solid-phase extraction and determination of ultra trace amounts of lead,mercury and cadmium in water samples using octadecyl silica membrane disks modified with 5,5′-dithiobis(2-nitrobenzoic acid) and atomic absorption spectrometry

A simple and fast method for preconcentration and determination of ultra trace amounts of lead(II), mercury(II) and cadmium(II) in water samples is presented. Lead, mercury and cadmium adsorbed quantitatively during passage of water samples (pH?=?7, flow rate?=?20 mL min^?1) through octadecyl silica membrane disks modified with 5,5′-dithiobis(2-nitrobenzoic acid). The retained lead, mercury and cadmium are then stripped from the disk with a minimal amount of 1 M hydrochloric acid solution as eluent, and determined by atomic absorption spectrometry. The influence of flow rates of the eluent and sample solution, the amount of ligand, type and least amount of eluent, pH of sample, effect of other ions and breakthrough volume are determined. The breakthrough volume of the method is greater than 2000 mL for lead and greater than 1500 mL for mercury and cadmium, which results in an enrichment factor of 200 for lead and an enrichment factor of 150 for both mercury and cadmium. The limit of detection of the proposed method is 177, 2 and 13 ng l^?1 for lead, mercury and cadmium, respectively.     

国内离子交换法处理氰化镉废水的现状及改进意见

本文对国内现行离子交换法处理氰化镀镉废水的工艺进行了探讨，提出了用络合理论将阴树脂由Ｃｌ－１型转变成ＣｄＣｌ４２－型后交换，便可提高对水中游离氰（ＣＮ－）的吸附能力，并能使氰、镉都得到回收利用。     

Natural analcime zeolite modified with 5-Br-PADAP for the preconcentration and anodic stripping voltammetric determination of trace amount of cadmium.

A procedure for separation and preconcentration of trace amounts of cadmium has been proposed. A column of analcime zeolite modified with benzyldimethyltetradecylammonium chloride and loaded with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) was used for retention of cadmium. The cadmium was quantitatively retained on the column at pH approximately 9 and was recovered from column with 5 ml of 2 M nitric acid with a preconcentration factor of 140. Anodic stripping differential pulse voltammetry was used for determination of cadmium. A 0.05 ng/ml detection limit for the preconcentration of aqueous solution of cadmium was obtained. The relative standard deviation (RSD) for eight replicate determinations at the 1 microg/ml cadmium levels was 0.31% (calculated with the peak height obtained). The calibration graph using the preconcentration system was linear from 0.01 to 150 microg/ml in final solution with a correlation coefficient of 0.9997. For optimization of conditions, various parameters such as the effect of pH, flow rate, instrumental conditions and interference of number of ions, were studied in detail. This method was successfully applied for determination of cadmium in various complex samples.