Effects of the types of zeolites on catalytic upgrading of pyrolysis wax oil

Because zeolites play an important role in an upgrading catalyst for heavy hydrocarbons in industrial refinery processes, the effects of the zeolite type on the upgrading of pyrolysis wax oil are investigated in this study. Raw pyrolysis wax oil was obtained from the pyrolysis of municipal plastic wastes in a commercial rotary kiln pyrolysis plant (Dongmyong RPF Co.). The catalystic experiments are performed for the three different types of commercial zeolites with different physicochemical properties in a continuous fixed bed reactor at 450 °C for 1 h as a MAT(micro-activity test) method: HZSM-5 (pure), zeolite Y (HY; pure or including 20% clay) and mordenite (HM; including 20% clay or alumina) catalysts. The highest conversion of pyrolysis wax oil into light hydrocarbons such as gas products and gasoline-range hydrocarbons is obtained for the HZSM-5 catalyst among them, and the composition of liquid products is found to become in the main aromatic components due to a shape selectivity. For the case of zeolite Y(HY), medium activity and the highest fraction of branched hydrocarbons with a high octane number, as well as a high fraction of aromatic products are shown. However, the mordenite (HM) with one-dimensional pore structure shows the lowest conversion of pyrolysis wax oil into light hydrocarbons and a very high fraction of paraffin product in the liquid product like the characteristics of raw pyrolysis wax oil.     

Fe-Zn-Zr/分子筛复合催化剂上CO2加氢合成异构烷烃Ⅰ.不同分子筛对催化剂性能的影响

 在Fe-Zn-Zr/分子筛复合催化剂上考察了不同类型的分子筛对CO2加氢反应性能的影响. 结果表明,不同分子筛对复合催化剂性能的影响不同,Fe-Zn-Zr/HY是合成异构烷烃有效的复合催化剂. 分子筛的酸性及酸强度对复合催化剂性能有较大的影响,中等强度和较高强度的酸性位有利于异构烃的生成.     

Synthesis of adamantane on zeolite catalysts

The synthesis of adamantane from tetrahydrodicyclopentadiene on zeolites with different framework structures was studied. The adamantane yield on HY zeolites is higher than on HM and HZSM-5 zeolites. Among various types of dealuminated HY zeolites the HEY and HUSY zeolites give higher adamantane yields than conventional HY zeolite. The changes in activity and selectivity of the main and side reactions are correlated with the acidity and the pore structure of the zeolites. To ion-exchange the HY and HUSY zeolites with Ni2+ and La3+ cations may further improve the activity and selectivity of the zeolite catalysts.     

分子筛催化剂的失活与积炭

分子筛催化剂的失活与积炭刘中民，陈国权，王清遐，梁娟，蔡光宇（中国科学院大连化学物理研究所，大连１１６０２３）关键词分子筛，结炭，催化剂失活，甲醇转化，ＨＺＳＭ－５结炭是酸性分子筛催化剂失活的主要因素．本文通过具有碳链增长、环化、烷基化等多种反应途径...     

Stabilization of Extra-Large-Pore Zeolite by Boron Substitution for the Production of Commercially Applicable Catalysts

Stable extra-large-pore zeolites are desirable for industrial purposes due to their ability to accommodate bulky reactants and diffusion through channels. Although there are several extra-large pore zeolites reported, stable ones are rare. Thus, their stabilization is a feasible strategy for industrial applications. Here, an extra-large-pore zeolite EWT with boron substitution is presented, and the resulting zeolite B-RZM-3 increased the thermal stability from 600 °C in its silica form to 850 °C. The crystal structure, determined by combining continuous rotation electron diffraction (cRED) and powder X-ray diffraction (PXRD), shows that B atoms preferentially substitute the interrupted (HO)T(OT)₃ (Q³) sites and are partially converted into 3-coordination to relax framework deformation upon heating. After Al-reinsertion post-treatment, Al-B-RZM-3 shows higher ethylbenzene selectivity and ethylene conversion rate per mol acid site than commercial ZSM-5 and Beta zeolite in benzene alkylation reaction. Synthesizing extra-large-pore zeolite in borosilicate form is a potential approach to stabilize interrupted zeolites for commercial applications.     

17O magic angle spinning NMR studies of Brønsted acid sites in zeolites HY and HZSM-5

High-resolution 17O/1H double resonance NMR spectra were obtained for two zeolites, one with a low Si/Al ratio (zeolite HY) and one with a high Si/Al ratio (HZSM-5), to investigate their local structure and Br?nsted acidity. Two different oxygen signals, corresponding to Br?nsted acid sites in supercages and sodalite cages of zeolite HY were readily resolved in the two-dimensional (2-D) 1H-17O heteronuclear correlation (HETCOR) NMR spectra allowing the 17O isotropic chemical shift (deltaCS) and quadrupolar coupling parameters (quadrupolar coupling constant, QCC, and asymmetry parameter, eta) for the two oxygen atoms to be extracted. Similar experiments for HZSM-5 showed that the sites in this system are associated with a much larger distribution in NMR parameters than found in HY. 17O-1H rotational echo double resonance (REDOR) NMR was applied to probe the O-H distances in zeolites HY and HZSM-5. Weaker 17O-1H dephasing was observed for zeolite HZSM-5 in comparison to that of HY, consistent with longer O-H bonds and/or increased proton mobility.     

ZSM-5沸石结晶度对乙苯叔丁基化对位选择性的影响(英文)

Highly crystalline ZSM-5 zeolites are important for para-selective alkylation of alkyl aromatics, because they carry few external acid sites for isomerization of p-dialkyl products. Such zeolites (Si/Al = 25, 50, and 75) were synthesized in a fluoride medium between pH 4 and 6. Their crystallinities, crystal sizes, and surface areas were higher than those of a commercial ZSM-5 zeolite. Their para selectivities in alkylation were tested for vapor-phase tert-butylation of ethylbenzene between 200 and 400 °C. As expected, all the catalysts showed more than 90% para selectivity. At 300 °C, ethylbenzene conversion decreased in the order ZSM-5(25, commercial) > ZSM-5(25) > ZSM-5(50) > ZSM-5(75). The catalysts had weak, medium, and strong acid sites, but all the acid sites of ZSM-5(75) were weaker than those of ZSM-5(25) and ZSM-5(50). The high activity of commercial ZSM-5 was caused by its strong acid sites being stronger than those of the synthesized zeolites. Although the activity of the commercial catalyst was higher than those of the present catalysts, the selectivity for 4-t-butylethylbenzene (4-t-BEB) was low. The optimum feed ratio (ethylbenzene:t-butyl alcohol) was 2:1 and the feed rate was 1.65 h?1 for high ethylbenzene conversion and 4-t-BEB selectivity. Time-on-stream studies showed slow catalyst deactivation. Highly crystalline ZSM-5 zeolites are therefore better than a commercial zeolite for para-selective alkylation of alkyl aromatics. They do not require much post-modification for high para selectivity. A fluoride medium is therefore better than an alkaline medium for obtaining highly crystalline para-selective ZSM-5 zeolites.     

Catalytic Synthesis of Hexyl-naphthalene over H-type Zeolites

H-type zeolites（ HY, Hβ, and HM） were synthesized and characterized by XRD, NH3-TPD, and Py-IR. Selectively catalytic alkylation of naphthalene with n-hexanol to hexyl-naphthalene over the zeolites was carried out. The experimental results show that the catalytic activities of the zeolites are mainly determined by their acid properties and pore structures. The larger the pore diameter is, the higher the catalytic activity is. NH3-TPD profiles show that Hβ and HM have lower acid strengths than HY. HY has both the highest activity and highest selectivity for the hexylnaphthalene. Higher reaction temperatures and longer reaction time are beneficial to the production of β-hexyl-naphthalene over the HY zeolite.     

复合分子筛催化微晶纤维素水解

采用水热晶化法制备了HY/ZSM-5复合分子筛。通过XRD、SEM、N2-吸附脱附、NH3-TPD及吡啶吸附红外光谱等手段表征催化剂的结构和性质。结果表明,HY与HZSM-5复合后HY型分子筛完全被HZSM-5紧密包裹,形成致密的核壳结构。与机械混合物相比,复合分子筛微孔比表面积及孔体积均有所减少,总酸量略高,弱酸量小,而强酸量大,Br9nsted酸量与之相似,而Lewis酸量有所减少。将所制备的HY/ZSM-5复合分子筛催化剂应用于以离子液体氯化1-乙基-3-甲基咪唑鎓([Emim]Cl)为溶剂的纤维素水解反应中,与HY催化的纤维素水解相比,HY/ZSM-5催化纤维素水解反应获得的最佳葡萄糖收率由28.04%提高到38.78%,葡萄糖选择性由28.91%提高至48.29%。     

HZSM—5沸石组成及其对甲苯乙基化选择性的影响

ZSM－5是一种铝含量较低（其（Si/Ai原子比变化可连续达几个数量级）的结晶硅酸铝，对许多酸催化反应有着良好的选择性。沸石Si/Al比的必然影响它的酸性质。Auroux和Kotasthane等研究HZSM－5沸石表面酸性时指出，强酸中心数与沸石铝含量有着密切的关系，酸强度分布也与铝含量有关，即随Si/Al比增加，最高酸强度中心数减少。另外，由晶胞参数测定表明，ZSM－5沸石孔径随Si/Al比增加呈逐渐缩小的趋势。由扫描电镜对沸石晶粒形貌和大小的测定示出，随Si/Al比增加，晶粒逐渐增大。鉴此，用不同整体Si/Al比和表层Si/Al比的HZSM－5沸石对甲苯乙基化反应的选择性进行了研究，结果表明：沸石表面酸性的调度以及孔径缩小和晶粒增大都能提高p-选择性，但表面最高酸强度的降 低比孔径缩小和晶粒增大更为重要。     

不同硅铝比的ZSM-11沸石分子筛的催化性能

合成了一系列硅铝比为31—176的ZSM-11沸石,以甲苯-甲醇烷基化、间二甲苯异构化和甲苯歧化三个反应作为探针反应,研究了它们的催化性能。将其与酸性质和晶胞参数相关联发现,低硅铝比适于甲苯歧化,中硅铝比适于间二甲苯异构化,高硅铝比适于甲苯-甲醇烷基化反应。各反应所需的酸强度为甲苯歧化>间二甲苯歧化>间二甲苯异构化>甲苯-甲醇烷基化。Na~+的存在以及用4-甲基喹啉或(CH_3)_3SiCl中毒,可抑制强酸位,明显提高甲苯-甲醇烷基化反应生成对二甲苯的选择性,尤以(CH_3)_3SiCl中毒的低Al/u.c.的NaHZSM-11最佳。     

Pt改性分子筛催化剂上丙烷与苯的烷基化反应

研究了不同分子筛负载的Pt催化剂上丙烷与苯的烷基化反应.结果表明,Pt/HZSM-5具有较好的催化性能.在0~0.3%范围内提高Pt负载量可以提高催化剂的催化活性和生成C9以及C10 芳烃的选择性,降低非芳烃产物的选择性.较低的反应温度、较高的苯/丙烷摩尔比和较高的空速有利于烷基芳烃的生成.     

Catalytic Conversion of Biomass-Derived Polyols into Para-xylene over SiO2-Modified Zeolites

This work proved that biomass-based polyols (sorbitol, xylitol, erythritol, glycerol and ethanediol) were able to be converted into high-value chemical (p-xylene) by catalytic cracking of polyols, alkylation of aromatics, and the isomerization of xylenes over the SiO₂-modified zeolites. Compared to the conventional HZSM-5 zeolite, the SiO₂-containing zeolites considerably increased the selectivity and yield of p-xylene due to the reduction of external surface acidity and the narrowing of pore entrance. The influences of the methanol additive, reaction temperature, and types of polyols on the selectivity and yield of p-xylene were investigated in detail. Catalytic cracking of polyols with methanol significantly enhanced the production of p-xylene by the alkylation of toluene with methanol. The highest p-xylene yield of 10.9 C-mol% with a p-xylene/xylenes ratio of 91.1% was obtained over the 15wt%SiO₂/HZSM-5 catalyst. The reaction pathway for the formation of p-xylene was addressed according to the study of the key reactions and the characterization of catalysts.     

Selective pyrolysis of Organosolv lignin over zeolites with product analysis by TG-FTIR

Organosolv lignin has been selected to investigate the thermal behavior of lignin over zeolites by using a thermogravimetric analyzer coupled with a Fourier-transform infrared spectrometer (TG-FTIR). The chemical structure of this lignin has been determined by ¹H NMR to obtain the distribution of main functional groups such as methoxyl groups and free aliphatic and phenolic hydroxyl groups. All three zeolite catalysts tested, HZSM-5, H-β, and USY, exerted significant influences on the dehydration reaction in the initial stage, the deoxygenation reaction of oxygenated compounds such as methanol and phenols, and the char-forming process during lignin pyrolysis in the range 30–800 °C. The dehydration reaction was enhanced in the order USY > HZSM-5 > H-β, while char formation was suppressed in the reverse order. The presence of HZSM-5 and H-β catalyzed the conversion of both oxygenated compounds and chars into the low-molecular-weight gases CO, CO₂, and methane. The addition of USY clearly aided decomposition of the oxygenated compounds, but had little effect on the char degradation.     

化学蒸气沉积硅氧化合物调变HZSM－5沸石的研究

本文研究了正硅酸乙酯分别在无胺法和有胺法制得的ＨＺＳＭ－５沸石上的沉积过程，并用吸附，ＮＨ３－ＴＰＤ及异丙醇探针反应等手段表征了沉积后的样品，发现沉积仅在外表面上进行，可使孔口变小但不影响孔道内性质，显示有对于二甲苯分子的择形吸附能力，且在甲苯甲醇烷基化反应和二甲苯异构化反应中表现出良好的择形催化性能．     

氟改性对纳米 HZSM-5 分子筛催化甲醇制丙烯的影响

 在比较了纳米和微米 HZSM-5 分子筛催化甲醇制丙烯反应性能的基础上, 对纳米 HZSM-5 分子筛进行了氟改性. 利用透射电镜、N2 吸附、X 射线衍射、氨程序升温脱附和吡啶吸附-红外光谱技术对改性前后的样品进行了表征, 并在常压、500 oC 和甲醇空速 (WHSV) 为 1.0 h–1 的反应条件下, 在连续流动固定床微型反应器上考察了其催化甲醇制丙烯的性能. 结果表明, 当氟含量<10% 时, 随氟含量的增加, 改性纳米 HZSM-5 分子筛的酸量减少, 酸强度降低, 从而使丙烯选择性和催化剂稳定性不断提高. 但过量 (15%) 氟的改性使纳米 HZSM-5 分子筛的酸量、比表面积和孔容均明显减小, 致使其稳定性反而降低. 在适量 (10%) 氟改性的纳米 HZSM-5 分子筛上, 丙烯选择性和维持甲醇完全转化的反应时间分别由原来的 30.1% 和 75 h 增加到 46.7% 和 145 h.     

不同分子筛上1-己烯骨架异构化反应性能的研究

以HZSM-35、HZSM-5、HM和Hβ四种分子筛为1-己烯骨架异构化催化剂,比较研究了四种催化剂的异构化性能,对其构效关系进行了关联。结果表明,相比于HZSM-5和Hβ分子筛,HZSM-35和HM具有适宜的酸量,有效孔径为0.4-0.6 nm,而且无晶穴、无交叉孔道,具有良好的择形催化效应,在转化率高达95%的同时,C_5-和C₇₊等副产物的收率在20%左右,异己烯收率可达40%-50%。进一步对四种分子筛进行酸碱改性处理,结果显示,虽然酸性质略有改变,但是一维孔结构的HZSM-35和HM分子筛的异构化性能仍明显优于多维孔结构的HZSM-5和Hβ分子筛,说明在酸性质一定的前提下,孔结构对异构化反应起关键作用。     

Conversion of dimethyl disulfide in the presence of zeolites

Dimethyl disulfide conversion in the presence of zeolites was studied at atmospheric pressure and T = 190–350°C. For all catalysts, the products of the reaction at T = 190°C—methanethiol, dimethyl sulfide, and hydrogen sulfide—result directly from dimethyl disulfide. The relative reaction rate and the dimethyl sulfide selectivity decreases in the order HZSM-5 ≥ CoHZSM-5 > HNaY > NaX, NaY. The methanethiol formation selectivity changes in the reverse order. The highest methanethiol selectivity at T = 190°C is shown by the sodium zeolites; the highest dimethyl sulfide selectivity, by the high-silicz zeolite HZSM-5. Raising the reaction temperature increases the reaction rate and changes the process route: at high temperatures, dimethyl disulfide decomposes to methanethiol, which then condenses to yield dimethyl sulfide and hydrogen sulfide. The observed regularities are explained in terms of the different acidic properties of the zeolite surfaces.     

Improved thermogravimetric system for processing of oil sludge using HY zeolite catalyst

The oil sludge residue presents an aggregate of hydrocarbons, organic and inorganic impurities, and water. The microporous and mesoporous zeolites are considered promising catalysts for processing of petroleum residues generated in refining processes. The aim of this work was to study the degradation of petroleum sludge obtained from primary processing, with applications of an improved thermogravimetry system and HY zeolite, at specific temperature ranges and degradation times, in order to obtain light gases and distillate fuels. The NaY zeolite was synthesized under hydrothermal treatment of a gel containing sodium silicate, sodium aluminate, and water. The obtained solid material was filtered, dried and calcined, and then ion-exchanged with ammonium chloride and calcined in order to obtain its protonic acid form (HY). The samples’ characterization by TG/DTG, XRD, and SEM proved that the crystalline structure of the faujasite zeolite was obtained. The thermal and catalytic degradation of the petroleum sludge was performed with 1.0 g of sample containing 10% of HY zeolite in the temperatures of 100, 200, 300, 400, and 500 °C, varying the time from 0 to 60 min to each temperature, using an oven with temperature program system, adapted with a Shimadzu precision balance. The curves obtained with this system evidenced that the presence of HY zeolite improves the degradation of the residue, with decreasing of the activation energy for the processes, as determined using the Arrhenius model.

     

HF改性的Pt/ZSM-5催化剂在苯和甲醇烷基化反应中的应用

以HF改性的Pt/ZSM-5为催化剂,研究了其在苯和甲醇烷基化反应的应用,并用XRD、NH₃-TPD、BET等表征方法研究了改性前后催化剂酸性和孔结构变化。 结果表明,经HF改性后,Pt/ZSM-5催化剂的酸性增强、酸量增加,苯和甲醇烷基化反应性能明显提升。 3%HF-0.2%Pt/ZSM-5催化剂催化苯和甲醇烷基化反应时,甲苯和二甲苯选择性达到92.20%。 但是,HF负载量大于6%时,HF脱除的部分骨架硅和骨架铝会堆积在催化剂孔道内部,限制了反应物和产物的扩散,造成其催化性能下降。 通过计算得到了HF改性的Pt/ZSM-5催化剂上苯和甲醇烷基化反应的活化能为118 kJ/mol。