A General Route to Prepare Low-Ruthenium-Content Bimetallic Electrocatalysts for pH-Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH-universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru-M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH-universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm⁻² in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm⁻². This performance is among the best catalytic activities reported for any platinum-free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Two-Dimensional NiIr@N-Doped Carbon Nanocomposites Supported on Ni Foam for Electrocatalytic Overall Water Splitting

Electrochemical water splitting can provide a promising avenue for sustainable hydrogen production. Highly efficient electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are extremely important for the practical application of water splitting technology. Herein, a one-step annealing strategy is reported for the fabrication of a metal–organic framework-derived bifunctional self-supported electrocatalyst, which is composed of two-dimensional N-doped carbon-wrapped Ir-doped Ni nanoparticle composites supported on Ni foam (NiIr@N-C/NF). The resultant NiIr@N-C/NF displays excellent electrocatalytic performance in 1.0 m KOH, with low overpotentials of 32 mV at 10 mA cm⁻² for the HER and 329 mV at 50 mA cm⁻² for the OER. Particularly, the HER-OER bifunctional NiIr@N-C/NF needs only 1.50 V to yield 10 mA cm⁻² for overall water splitting.     

Electrodeposition at Highly Negative Potentials of an Iron-Cobalt Oxide Catalyst for Use in Electrochemical Water Splitting

Earth-abundant transition metal-based catalysts have been extensively investigated for their applicability in water electrolysers to enable overall water splitting to produce clean hydrogen and oxygen. In this study a Fe−Co based catalyst is electrodeposited in 30 seconds under vigorous hydrogen evolution conditions to produce a high surface area material that is active for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). This catalyst can achieve high current densities of 600 mAcm⁻² at an applied potential of 1.6 V (vs RHE) in 1 M NaOH with a Tafel slope value of 48 mV dec⁻¹ for the OER. In addition, the HER can be facilitated at current densities as high as 400 mA cm⁻² due to the large surface area of the material. The materials were found to be predominantly amorphous but did contain crystalline regions of CoFe₂O₄ which became more evident after the OER indicating interesting compositional and structural changes that occur to the catalyst after an electrocatalytic reaction. This rapid method of creating a bimetallic oxide electrode for both the HER and OER could possibly be adopted to other bimetallic oxide systems suitable for electrochemical water splitting.     

Amorphous Co-P Film: an Efficient Electrocatalyst for Hydrogen Evolution Reaction in Alkaline Seawater

Seawater electrolysis is considered an attractive alternative to conventional freshwater electrolysis for hydrogen production due to the abundance of seawater in nature. For this reason, efficient electrocatalysts for hydrogen evolution reaction (HER) in alkaline seawater are highly desired. In this study, we report an amorphous Co−P alloy on nickel foam (Co−P/NF) that behaves as an efficient and stable HER electrocatalyst for alkaline seawater electrolysis. The Co−P/NF presents high catalytic performance for HER, requiring a low overpotential of 213 mV to drive a current density of 100 mA cm⁻² and a Tafel slope of 120.2 mV dec⁻¹ in alkaline seawater. Furthermore, it shows remarkable electrochemical and structural stability in alkaline seawater.     

Robust Polyoxometalate/Nickel Foam Composite Electrodes for Sustained Electrochemical Oxygen Evolution at High pH

The development of technologically viable electrodes for the electrochemical oxygen evolution reaction (OER) is a major bottleneck in chemical energy conversion. This article describes a facile one‐step hydrothermal route to deposit microcrystals of a robust Dexter–Silverton polyoxometalate oxygen evolution catalyst, [Co_6.8Ni_1.2W₁₂O₄₂(OH)₄(H₂O)₈], on a commercial nickel foam electrode. The electrode shows efficient and sustained electrochemical oxygen evolution at low overpotentials (360 mV at 10 mA cm⁻² against RHE, Tafel slope 126 mV dec⁻¹, faradaic efficiency (96±5) %) in alkaline aqueous solution (pH 13). Post‐catalytic analyses show no mechanical or chemical degradation and no physical detachment of the microcrystals. The results provide a blueprint for the stable “wiring” of POM catalysts to commercial metal foam substrates, thus giving access to technologically relevant composite OER electrodes.     

Optimization of the Hydrogen-Adsorption Free Energy of Ru-Based Catalysts towards High-Efficiency Hydrogen Evolution Reaction at all pH

The utilization of noble-metal catalysts for the hydrogen evolution reaction (HER) provides an efficient strategy for hydrogen acquisition. However, exploring catalysts with suitable hydrogen binding strength for the HER process is always of great importance, but extremely challenging. In this work, sulfur and phosphor as electron-withdrawing elements were incorporated into carbon nanotube (CNT)-supported Ru catalysts, which were prepared through a facile solution reduction reaction and post thermo treatment. Owing to the suitable electronegativity provided by P and synergistic effects of the carbon nanotubes, the RuP₂/CNT achieved a high catalytic performance as a HER electrocatalyst. This may result from the modulation effect of the electronic properties and the depressed adsorption free energy of RuP₂. Electrochemical tests present that the RuP₂/CNT composite exhibit a small overpotential of 58 mV at 10 mA cm⁻² in acidic electrolyte. In a neutral or alkaline environment, the overpotential is 82 and 40 mV, respectively. The RuP₂/CNT electrode also possesses stable durability for long-time cycling, suggesting its remarkable property as promising all-pH HER catalyst.     

High Valence State Sites as Favorable Reductive Centers for High-Current-Density Water Splitting

Electrochemical water splitting is a promising approach for producing sustainable and clean hydrogen. Typically, high valence state sites are favorable for oxidation evolution reaction (OER), while low valence states can facilitate hydrogen evolution reaction (HER). However, here we proposed a high valence state of Co³⁺ in Ni_9.5Co_0.5−S−FeO_x hybrid as the favorable center for efficient and stable HER, while structural analogues with low chemical states showed much worse performance. As a result, the Ni_9.5Co_0.5−S−FeO_x catalyst could drive alkaline HER with an ultra-low overpotential of 22 mV for 10 mA cm⁻², and 175 mV for 1000 mA cm⁻² at the industrial temperature of 60 °C, with an excellent stability over 300 h. Moreover, this material could work for both OER and HER, with a low cell voltage being 1.730 V to achieve 1000 mA cm⁻² for overall water splitting at 60 °C. X-ray absorption spectroscopy (XAS) clearly identified the high valence Co³⁺ sites, while in situ XAS during HER and theoretical calculations revealed the favorable electron capture at Co³⁺ and suitable H adsorption/desorption energy around Co³⁺, which could accelerate the HER. The understanding of high valence states to drive reductive reactions may pave the way for the rational design of energy-related catalysts.     

多酸在电催化析氢反应中的应用研究进展

电催化水裂解是一种可持续用于生产可再生氢能源的技术。然而,开发高效稳定、低成本的析氢电催化剂仍是一项具有挑战性的任务。多金属氧酸盐(多酸)是一种离散的金属氧簇合物,通常由氧配体和高价的钒(V)、钼(VI)、钨(VI)金属构成。由于多酸含有丰富的氧化还原活性金属中心,因此,近几年来,多酸在水裂解应用研究方面备受关注。本综述将聚焦于多酸在电催化水裂解析氢的应用研究进展。本文还突出强调了电催化析氢目前面临的主要问题,以及对多酸基催化剂及作为催化剂前体在电催化析氢方面的应用及发展前景做了展望。     

Nanoporous Graphene with Single‐Atom Nickel Dopants: An Efficient and Stable Catalyst for Electrochemical Hydrogen Production

Single‐atom nickel dopants anchored to three‐dimensional nanoporous graphene can be used as catalysts of the hydrogen evolution reaction (HER) in acidic solutions. In contrast to conventional nickel‐based catalysts and graphene, this material shows superior HER catalysis with a low overpotential of approximately 50 mV and a Tafel slope of 45 mV dec^?1 in 0.5 M H₂SO₄ solution, together with excellent cycling stability. Experimental and theoretical investigations suggest that the unusual catalytic performance of this catalyst is due to sp–d orbital charge transfer between the Ni dopants and the surrounding carbon atoms. The resultant local structure with empty C–Ni hybrid orbitals is catalytically active and electrochemically stable.     

Ni2P Interlayer and Mn Doping Synergistically Expedite the Hydrogen Evolution Reaction Kinetics of Co2P

Transition metal phosphide is regarded as one of the most promising candidates to replace noble-metal hydrogen evolution reaction (HER) electrocatalysts. Nevertheless, the controllable design and synthesis of transition metal phosphide electrocatalysts with efficient and stable electrochemical performance are still very challenging. Herein, a novel hierarchical HER electrocatalyst consisting of three-dimensional (3D) coral-like Mn-doped Co₂P@an intermediate layer of Ni₂P generated in situ by phosphorization on Ni foam (MnCoP/NiP/NF) is reported. Notably, both the incorporation of Mn and introduction of the Ni₂P interlayer promote Co atoms to carry more electrons, which is beneficial to reduce the force of the Co−H bond and optimize the adsorption energy of hydrogen intermediate (|ΔG_H*|), thereby making MnCoP/NiP/NF exhibit outstanding HER performance with onset overpotential and Tafel slope as low as 31.2 mV and 61 mV dec⁻¹, respectively, in 1 m KOH electrolyte.     

Ru-Doping Enhanced Electrocatalysis of Metal–Organic Framework Nanosheets toward Overall Water Splitting

An Ru-doping strategy is reported to substantially improve both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) electrocatalytic activity of Ni/Fe-based metal–organic framework (MOF) for overall water splitting. As-synthesized Ru-doped Ni/Fe MIL-53 MOF nanosheets grown on nickel foam (MIL-53(Ru-NiFe)@NF) afford HER and OER current density of 50 mA cm⁻² at an overpotential of 62 and 210 mV, respectively, in alkaline solution with a nominal Ru loading of ≈110 μg cm⁻². When using as both anodic and cathodic (pre-)catalyst, MIL-53(Ru-NiFe)@NF enables overall water splitting at a current density of 50 mA cm⁻² for a cell voltage of 1.6 V without iR compensation, which is much superior to state-of-the-art RuO₂-Pt/C-based electrolyzer. It is discovered that the Ru-doping considerably modulates the growth of MOF to form thin nanosheets, and enhances the intrinsic HER electrocatalytic activity by accelerating the sluggish Volmer step and improving the intermediate oxygen adsorption for increased OER catalytic activity.     

From a Molecular 2Fe‐2Se Precursor to a Highly Efficient Iron Diselenide Electrocatalyst for Overall Water Splitting

A highly active FeSe₂ electrocatalyst for durable overall water splitting was prepared from a molecular 2Fe‐2Se precursor. The as‐synthesized FeSe₂ was electrophoretically deposited on nickel foam and applied to the oxygen and hydrogen evolution reactions (OER and HER, respectively) in alkaline media. When used as an oxygen‐evolution electrode, a low 245 mV overpotential was achieved at a current density of 10 mA cm⁻², representing outstanding catalytic activity and stability because of Fe(OH)₂/FeOOH active sites formed at the surface of FeSe₂. Remarkably, the system is also favorable for the HER. Moreover, an overall water‐splitting setup was fabricated using a two‐electrode cell, which displayed a low cell voltage and high stability. In summary, the first iron selenide material is reported that can be used as a bifunctional electrocatalyst for the OER and HER, as well as overall water splitting.     

Atmospheric-Temperature Chain Reaction towards Ultrathin Non-Crystal-Phase Construction for Highly Efficient Water Splitting

Combining the self-sacrifice of a highly crystalline substance to design a multistep chain reaction towards ultrathin active-layer construction for high-performance water splitting with atmospheric-temperature conditions and an environmentally benign aqueous environment is extremely intriguing and full of challenges. Here, taking cobalt carbonate hydroxides (CCHs) as the initial crystalline material, we choose the Lewis acid metal salt of Fe(NO₃)₃ to induce an aqueous-phase chain reaction generating free CO₃²⁻ ions with subsequent instant FeCO₃ hydrolysis. The resultant ultrathin (∼5 nm) amorphous Fe-based hydroxide layer on CCH results in considerable activity in catalyzing the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), yielding 10/50 mA ⋅ cm⁻² at overpotentials of 230/266.5 mV for OER and 72.5/197.5 mV for HER. The catalysts can operate constantly in 1.0 M KOH over 48 and 45 h for the OER and HER, respectively. For bifunctional catalysis for alkaline electrolyzer assembly, a cell voltage as low as 1.53 V was necessary to yield 10 mA cm⁻² (1.7 V at 50 mA cm⁻²). This work rationally builds high-efficiency electrochemical bifunctional water-splitting catalysts and offers a trial in establishing a controllable nanolevel ultrathin lattice disorder layer through an atmospheric-temperature chemical route.     

Folded nanosheet-like Co<Subscript>0.85</Subscript>Se array for overall water splitting

Active, stable, and earth-abundant bifunctional electrocatalyst for overall water splitting is pivotal to actualize large-scale water splitting via electrolysis. In this work, the hierarchical folded nanosheet-like Co_0.85Se array on Ni foam is constructed by liquid-phase chemical conversion with cobalt precursor nanorod array. It can serve as an efficient bifunctional electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte, with a current density of 10 mA cm^?2 at overpotential of 232 mV for OER and 129 mV for HER and Tafel slope of 78.9 mV dec^?1 for OER and 95.0 mV dec^?1 for HER, respectively. The two-electrode alkaline water electrolyzer utilizing this folded nanosheet-like Co_0.85Se array as both anode and cathode toward overall water splitting offered a current of 10 mA cm^?2 at a cell voltage of 1.60 V. This work explores an efficient and low-cost electrocatalyst for overall water splitting application in alkaline electrolytes.     

Fabrication of a Hierarchical Ni(OH)2@Ni3S2/Ni Foam Electrode from a Prussian Blue Analogue-Based Composite with Enhanced Electrochemical Capacitive and Electrocatalytic Properties

Developing high-efficiency, cost-effective, and durable electrodes is significant for electrochemical capacitors and electrocatalysis. Herein, a 3D bifunctional electrode consisting of nickel hydroxide nanosheets@nickel sulfide nanocubes arrays on Ni foam (Ni(OH)₂@Ni₃S₂/NF) obtained from a Prussian blue analogue-based precursor is reported. The 3D higher-order porous structure and synergistic effect of different compositions endow the electrode with large specific surface area, facile ion/electron transport path, and improved conductivity. As a result, the Ni(OH)₂@Ni₃S₂/NF electrode exhibits a high specific capacity of 211 mA h g⁻¹ at a current density of 1 A g⁻¹ and 73 % capacity retention after 5000 cycles at 5 A g⁻¹. Moreover, the Ni(OH)₂@Ni₃S₂/NF electrode has superior electrocatalytic activity for the hydrogen evolution reaction with low overpotentials of 140 and 210 mV at current densities of 10 and 100 mA cm⁻², respectively. The synthetic strategy for the unique higher-order porous structure can be extended to fabricate other composite materials for energy storage and conversion.     

Nickel Foam Supported NiO@Ru Heterostructure Towards High-Efficiency Overall Water Splitting

Electrocatalytic water splitting for hydrogen production from renewable energy requires the innovation of electrocatalysts with high activity and low cost. In this work, densely packed NiO@Ru nanosheets were fabricated on the surface of Ni foam through a two-step method of Ni(OH)₂ growth followed by Ru deposition. Through pair distribution function analysis from selected-area electron diffraction and X-ray photoelectron spectroscopy, the interface structure feature is revealed as a thin layer of perovskite NiRuO₃ sandwiched between NiO and Ru. The electrode exhibits high activity and durability for HER and OER, delivering a current density of 10 mA cm⁻² at a voltage of 1.55 V for overall water splitting in 1 M KOH. The excellent performance can be attributed to the intimate interface contact of NiO and Ru in addition to low charge transfer resistance and super-hydrophilic surface structure, as verified by the electrochemical impedance spectroscopy and contact-angle measurement.     

镍铜合金立方体纳米晶的脉冲电沉积及电催化析氢性能

以泡沫镍(NF)为基体, 采用常规脉冲伏安法合成了独立分相的金属Ni, Cu为主晶相、 平均粒径为70 nm的规则立方体结构镍铜合金电催化剂(NiCu/NF). 在电催化析氢反应中, NiCu/NF表现出优良的催化活性和优异的催化稳定性, 在电流密度为10 mA/cm ²时, 在1.0 mol/L KOH溶液中需要的析氢过电位仅为86 mV, 催化24 h的电位波动仅为12 mV. 二级复合纳米立方体结构使NiCu/NF展现出15.5倍于空白NF的电化学活性面积(ECSA), 为电催化反应提供了大量催化活性位点, 也为电极表面的电荷传输、 物质传递提供了充足的通道; Cu的引入以及NiO/Ni异质结的形成改善了邻近Ni原子的活性, 使镍基材料本征析氢活性得以改善, 三者协同促进了NiCu/NF电催化活性的提升. NiCu/NF电极在析氢过程中遵循Volmer-Heyrovsky机理, 反应速率由电极表面吸附氢原子的电化学脱附过程决定.     

NiSe Nanowire Film Supported on Nickel Foam: An Efficient and Stable 3D Bifunctional Electrode for Full Water Splitting

Active and stable electrocatalysts made from earth‐abundant elements are key to water splitting for hydrogen production through electrolysis. The growth of NiSe nanowire film on nickel foam (NiSe/NF) in situ by hydrothermal treatment of NF using NaHSe as Se source is presented. When used as a 3D oxygen evolution electrode, the NiSe/NF exhibits high activity with an overpotential of 270 mV required to achieve 20 mA cm^?2 and strong durability in 1.0 M KOH, and the NiOOH species formed at the NiSe surface serves as the actual catalytic site. The system is also highly efficient for catalyzing the hydrogen evolution reaction in basic media. This bifunctional electrode enables a high‐performance alkaline water electrolyzer with 10 mA cm^?2 at a cell voltage of 1.63 V.     

A General Route to Prepare Low‐Ruthenium‐Content Bimetallic Electrocatalysts for pH‐Universal Hydrogen Evolution Reaction by Using Carbon Quantum Dots

A challenging but pressing task to design and synthesize novel, efficient, and robust pH‐universal hydrogen evolution reaction (HER) electrocatalysts for scalable and sustainable hydrogen production through electrochemical water splitting. Herein, we report a facile method to prepare an efficient and robust Ru‐M (M=Ni, Mn, Cu) bimetal nanoparticle and carbon quantum dot hybrid (RuM/CQDs) for pH‐universal HER. The RuNi/CQDs catalysts exhibit outstanding HER performance at all pH levels. The unexpected low overpotentials of 13, 58, and 18 mV shown by RuNi/CQDs allow a current density of 10 mA cm^?2 in 1 m KOH, 0.5 m H₂SO₄, and 1 m PBS, respectively, for Ru loading at 5.93 μgRu cm^?2. This performance is among the best catalytic activities reported for any platinum‐free electrocatalyst. Theoretical studies reveal that Ni doping results in a moderate weakening of the hydrogen bonding energy of nearby surface Ru atoms, which plays a critical role in improving the HER activity.     

Tweaking Nickel with Minimal Silver in a Heterogeneous Alloy of Decahedral Geometry to Deliver Platinum-like Hydrogen Evolution Activity

Five-fold intertwined Ag_xNi_1−x (x=0.01–0.25) heterogeneous alloy nanocrystal (NC) catalysts, prepared through unique reagent combinations, are presented. With only ca. 5 at % Ag (AgNi-5), Pt-like activity has been achieved at pH 14. To reach a current density of 10 mA cm⁻² the extremely stable AgNi-5 requires an overpotential of 24.0±1.2 mV as compared to 20.1±0.8 mV for 20 % Pt/C, both with equal catalyst loading of 1.32 mg cm⁻². The turnover frequency (TOF) is as high as 2.1 H₂ s⁻¹ at 50 mV (vs. RHE). Site-specific elemental analyses show the Ag:Ni compositional variation, where the apex and edges of the decahedra are Ag-rich, thereby exposing Ni onto the faces to achieve maximum charge transport for an exceptional pH universal HER activity. DFT calculations elucidate the relative H-atom adsorption capability of the Ni centers as a function of their proximity to Ag atom.