Biomimetic polymer/apatite composite scaffolds for mineralized tissue engineering

The material surface must be considered in the design of scaffolds for bone tissue engineering so that it supports bone cells adhesion, proliferation and differentiation. A biomimetic approach has been developed as a 3D surface modification technique to grow partially carbonated hydroxyapatite (the bonelike mineral) in prefabricated, porous, polymer scaffolds using a simulated body fluid in our lab. For the rational design of scaffolding materials and optimization of the biomimetic process, this work focused on various materials and processing parameters in relation to apatite formation on 3D polymer scaffolds. The apatite nucleation and growth in the internal pores of poly(L-lactide) and poly(D,L-lactide) scaffolds were significantly faster than in those of poly(lactide-co-glycolide) scaffolds in simulated body fluids. The apatite distribution was significantly more uniform in the poly(L-lactide) scaffolds than in the poly(lactide-co-glycolide) scaffolds. After incubation in a simulated body fluid for 30 d, the mass of poly(L-lactide) scaffolds increased approximately 40%, whereas the mass of the poly(lactide-co-glycolide) scaffolds increased by about 15% (see Figure). A higher ionic concentration and higher pH value of the simulated body fluid enhanced apatite formation. The effects of surface functional groups on apatite nucleation and growth were found to be more complex in 3D scaffolds than on 2D films. Surprisingly enough, it was found that carboxyl groups significantly reduced the apatite formation, especially on the internal pore surfaces of 3D scaffolds. These findings are critically important in the rational selection of materials and surface design of 3D scaffolds for mineralized tissue engineering and may contribute to the understanding of biomineralization as well.SEM micrograph of a poly(L-lactide) scaffold.     

Synthetic chemoselective rewiring of cell surfaces: generation of three-dimensional tissue structures

Proper cell-cell communication through physical contact is crucial for a range of fundamental biological processes including, cell proliferation, migration, differentiation, and apoptosis and for the correct function of organs and other multicellular tissues. The spatial and temporal arrangements of these cellular interactions in vivo are dynamic and lead to higher-order function that is extremely difficult to recapitulate in vitro. The development of three-dimensional (3D), in vitro model systems to investigate these complex, in vivo interconnectivities would generate novel methods to study the biochemical signaling of these processes, as well as provide platforms for tissue engineering technologies. Herein, we develop and employ a strategy to induce specific and stable cell-cell contacts in 3D through chemoselective cell-surface engineering based on liposome delivery and fusion to display bio-orthogonal functional groups from cell membranes. This strategy uses liposome fusion for the delivery of ketone or oxyamine groups to different populations of cells for subsequent cell assembly via oxime ligation. We demonstrate how this method can be used for several applications including, the delivery of reagents to cells for fluorescent labeling and cell-surface engineering, the formation of small, 3D spheroid cell assemblies, and the generation of large and dense, 3D multilayered tissue-like structures for tissue engineering applications.     

Personalized hydrogels for individual health care: preparation,features, and applications in tissue engineering

Biomaterials-based tissue engineering scaffolds play an essential role as an independent therapy or with the combination of cellular or biological active constituents in tissue regeneration applications. However, synthetic grafts, xenografts, and allografts are recognized as foreign materials in human body, resulting in suboptimal clinical outcomes. Recently, autologous materials from a patient's body have drawn great attention in clinical treatment and tissue engineering. Moreover, the autologous scaffolds equipped with the advantages of tissue-like hydrogels have great potential to become a highly versatile tool as personalized hydrogels (PHs) for applications in 3D cell culture and tissue engineering. PHs may feature excellent biocompatibility, tailorable mechanical properties, regenerative capability, non-rejection of grafts/transplants on immunological responses, and customizable properties which could be suitable to meet the personal and clinical care. Here, we present a scoping review of recent progress of PHs with a focus on detailed preparation methods, material properties, and tissue engineering applications along with their challenges and opportunities. It is expected that PHs will circumvent the limitations of current tissue engineering therapies and will be used as next-generation scaffolds for tissue engineering and translational research.     

Microcantilevers and organic transistors: two promising classes of label-free biosensing devices which can be integrated in electronic circuits

Most of the success of electronic devices fabricated to actively interact with a biological environment relies on the proper choice of materials and efficient engineering of surfaces and interfaces. Organic materials have proved to be among the best candidates for this aim owing to many properties, such as the synthesis tunability, processing, softness and self-assembling ability, which allow them to form surfaces that are compatible with biological tissues. This review reports some research results obtained in the development of devices which exploit organic materials' properties in order to detect biologically significant molecules as well as to trigger/capture signals from the biological environment. Among the many investigated sensing devices, organic field-effect transistors (OFETs), organic electrochemical transistors (OECTs) and microcantilevers (MCLs) have been chosen. The main factors motivating this choice are their label-free detection approach, which is particularly important when addressing complex biological processes, as well as the possibility to integrate them in an electronic circuit. Particular attention is paid to the design and realization of biocompatible surfaces which can be employed in the recognition of pertinent molecules as well as to the research of new materials, both natural and inspired by nature, as a first approach to environmentally friendly electronics.     

Engineering Proteins at Interfaces: From Complementary Characterization to Material Surfaces with Designed Functions

Once materials come into contact with a biological fluid containing proteins, proteins are generally—whether desired or not—attracted by the material's surface and adsorb onto it. The aim of this Review is to give an overview of the most commonly used characterization methods employed to gain a better understanding of the adsorption processes on either planar or curved surfaces. We continue to illustrate the benefit of combining different methods to different surface geometries of the material. The thus obtained insight ideally paves the way for engineering functional materials that interact with proteins in a predetermined manner.     

Smart Porous Multi-Stimulus Polysaccharide-Based Biomaterials for Tissue Engineering

Recently, tissue engineering and regenerative medicine studies have evaluated smart biomaterials as implantable scaffolds and their interaction with cells for biomedical applications. Porous materials have been used in tissue engineering as synthetic extracellular matrices, promoting the attachment and migration of host cells to induce the in vitro regeneration of different tissues. Biomimetic 3D scaffold systems allow control over biophysical and biochemical cues, modulating the extracellular environment through mechanical, electrical, and biochemical stimulation of cells, driving their molecular reprogramming. In this review, first we outline the main advantages of using polysaccharides as raw materials for porous scaffolds, as well as the most common processing pathways to obtain the adequate textural properties, allowing the integration and attachment of cells. The second approach focuses on the tunable characteristics of the synthetic matrix, emphasizing the effect of their mechanical properties and the modification with conducting polymers in the cell response. The use and influence of polysaccharide-based porous materials as drug delivery systems for biochemical stimulation of cells is also described. Overall, engineered biomaterials are proposed as an effective strategy to improve in vitro tissue regeneration and future research directions of modified polysaccharide-based materials in the biomedical field are suggested.     

3D打印生物医用材料研究进展

3D打印(亦称增材制造)技术因其独特的材料成型优势,在组织工程、航空航天、汽车制造、以及电子工业等众多领域显示出巨大的应用潜力。然而,在实际生物医学应用中,3D打印生物器件和组织器官除了要求具有复杂的结构和优异的生物学性能外,其打印结构的表面性质也需满足某些特定的要求,如3D打印组织骨架和器官必须具有生物相容性、抗菌性及细胞粘附性等。因此,将3D打印与传统表面修饰技术相结合,在不改变材料三维结构的基础上调控其表面生物化学性质,从而赋予3D打印生物骨架器官多功能化,可实现更为广泛的应用。本文以3D打印生物骨架及器官的表面修饰为主要内容对就近年来3D打印生物医用材料的最新研究进展进行了综述。     

Three‐Dimensional Scaffolds of Carbonized Polyacrylonitrile for Bone Tissue Regeneration

Carbon‐based materials have been extensively studied for stem cell culture. However, difficulties associated with engineering pure carbon materials into 3D scaffolds have hampered applications in tissue engineering and regenerative medicine. Carbonized polyacrylonitrile (cPAN) could be a promising alternative, as cPAN is a highly ordered carbon isomorph that resembles the graphitic structure and can be easily processed into 3D scaffolds. Despite the notable features of cPAN, application of cPAN in tissue engineering and regenerative medicine have not been explored. This study, for the first time, demonstrates the fabrication of microporous 3D scaffolds of cPAN and excellent osteoinductivity of cPAN, suggesting utility of 3D cPAN scaffolds as synthetic bone graft materials. The combination of excellent processability and unique bioactive properties of cPAN may lead to future applications in orthopedic regenerative medicine.     

Recent Advances in 3D Printing of Photocurable Polymers: Types,Mechanism, and Tissue Engineering Application

The conversion of liquid resin into solid structures upon exposure to light of a specific wavelength is known as photopolymerization. In recent years, photopolymerization-based 3D printing has gained enormous attention for constructing complex tissue-specific constructs. Due to the economic and environmental benefits of the biopolymers employed, photo-curable 3D printing is considered an alternative method for replacing damaged tissues. However, the lack of suitable bio-based photopolymers, their characterization, effective crosslinking strategies, and optimal printing conditions are hindering the extensive application of 3D printed materials in the global market. This review highlights the present status of various photopolymers, their synthesis, and their optimization parameters for biomedical applications. Moreover, a glimpse of various photopolymerization techniques currently employed for 3D printing is also discussed. Furthermore, various naturally derived nanomaterials reinforced polymerization and their influence on printability and shape fidelity are also reviewed. Finally, the ultimate use of those photopolymerized hydrogel scaffolds in tissue engineering is also discussed. Taken together, it is believed that photopolymerized 3D printing has a great future, whereas conventional 3D printing requires considerable sophistication, and this review can provide readers with a comprehensive approach to developing light-mediated 3D printing for tissue-engineering applications.     

4D Bioprinting: Technological Advances in Biofabrication

The development of the three‐dimensional (3D) printer has resulted in significant advances in a number of fields, including rapid prototyping and biomedical devices. For 3D structures, the inclusion of dynamic responses to stimuli is added to develop the concept of four‐dimensional (4D) printing. Typically, 4D printing is useful for biofabrication by reproducing a stimulus‐responsive dynamic environment corresponding to physiological activities. Such a dynamic environment can be precisely designed with an understanding of shape‐morphing effects (SMEs), which enables mimicking the functionality or intricate geometry of tissues. Here, 4D bioprinting is investigated for clinical use, for example, in drug delivery systems, tissue engineering, and surgery in vivo. This review presents the concept of 4D bioprinting and smart materials defined by SMEs and stimulus‐responsive mechanisms. Then, biomedical smart materials and applications are discussed along with future perspectives.     

Covalent Attachment of Fibronectin onto Emulsion‐Templated Porous Polymer Scaffolds Enhances Human Endometrial Stromal Cell Adhesion,Infiltration, and Function

A novel strategy for the surface functionalization of emulsion‐templated highly porous (polyHIPE) materials as well as its application to in vitro 3D cell culture is presented. A heterobifunctional linker that consists of an amine‐reactive N‐hydroxysuccinimide ester and a photoactivatable nitrophenyl azide, N‐sulfosuccinimidyl‐6‐(4′‐azido‐2′‐nitrophenylamino)hexanoate (sulfo‐SANPAH), is utilized to functionalize polyHIPE surfaces. The ability to conjugate a range of compounds (6‐aminofluorescein, heptafluorobutylamine, poly(ethylene glycol) bis‐amine, and fibronectin) to the polyHIPE surface is demonstrated using fluorescence imaging, FTIR spectroscopy, and X‐ray photoelectron spectroscopy. Compared to other existing surface functionalization methods for polyHIPE materials, this approach is facile, efficient, versatile, and benign. It can also be used to attach biomolecules to polyHIPE surfaces including cell adhesion‐promoting extracellular matrix proteins. Cell culture experiments demonstrated that the fibronectin‐conjugated polyHIPE scaffolds improve the adhesion and function of primary human endometrial stromal cells. It is believed that this approach can be employed to produce the next generation of polyHIPE scaffolds with tailored surface functionality, enhancing their application in 3D cell culture and tissue engineering whilst broadening the scope of applications to a wider range of cell types.     

Effect of a scaffold fabricated thermally from acetylated PLGA on the formation of engineered cartilage

A MHDS has been employed to fabricate 3D scaffolds from PLGA with acetyl endgroups to achieve in vivo regeneration of cartilage tissue. The fabricated acetylated-PLGA scaffold showed open pores and interconnected structures. Rabbit chondrocytes were seeded on the PLGA scaffolds and transplanted immediately into subcutaneous sites of athymic mice. Chondrocytes transplantation with untreated PLGA scaffolds served as a control. Histological analysis of the implants at 4 weeks with H&E staining and alcian blue staining revealed higher extracellular matrix and GAG expression at the neocartilage in the PLGA-6Ac scaffolds than that of the PLGA-6OH scaffold group. This endgroup-modified scaffold may be useful for successful cartilage tissue engineering in orthopedic applications.     

Functionalized Synthetic Biodegradable Polymer Scaffolds for Tissue Engineering

Scaffolds (artificial ECMs) play a pivotal role in the process of regenerating tissues in 3D. Biodegradable synthetic polymers are the most widely used scaffolding materials. However, synthetic polymers usually lack the biological cues found in the natural extracellular matrix. Significant efforts have been made to synthesize biodegradable polymers with functional groups that are used to couple bioactive agents. Presenting bioactive agents on scaffolding surfaces is the most efficient way to elicit desired cell/material interactions. This paper reviews recent advancements in the development of functionalized biodegradable polymer scaffolds for tissue engineering, emphasizing the syntheses of functional biodegradable polymers, and surface modification of polymeric scaffolds.

     

Plasma Surface Modification of Biomedical Polymers: Influence on Cell-Material Interaction

Polymers are commonly used in industry because of their excellent bulk properties, such as strength and good resistance to chemicals. Their surface properties are for most application inadequate due to their low surface energy. A surface modification is often needed, and plasma surface modification is used with success the past decades. In the past few years, also plasma surface modification for biomedical polymers has been investigated. For biomedical polymers, the surface properties need to be altered to promote a good cell adhesion, growth and proliferation and to make them suitable for implants and tissue engineering scaffolds. This review gives an overview of the use of plasma surface modification of biomedical polymers and the influence on cell-material interactions. First, an introduction on cell-material interaction and on antibacterial and antifouling surfaces will be given. Also, different plasma modifying techniques used for polymer surface modification will be discussed. Then, an overview of literature on plasma surface modification of biopolymers and the resulting influence on cell-material interaction will be given. After an overview of plasma treatment for improved cell-material interaction, plasma polymerization and plasma grafting techniques will be discussed. Some more specialized applications will be also presented: the treatment of 3D scaffolds for tissue engineering and the spatial control of cell adhesion. Antibacterial and antifouling properties, obtained by plasma techniques, will be discussed. An overview of research dealing with antibacterial surfaces created by plasma techniques will be given, antifouling surfaces will be discussed, and how blood compatibility can be improved by preventing protein adhesion.     

Novel 3D printed shape-memory PLLA-TMC/GA-TMC scaffolds for bone tissue engineering with the improved mechanical properties and degradability

The biodegradable substitution materials for bone tissue engineering have been a research hotspot. As is known to all, the biodegradability, biocompatibility, mechanical properties and plasticity of the substitution materials are the important indicators for the application of implantation materials. In this article, we reported a novel binary substitution material by blending the poly(lactic-acid)-co-(trimethylene-carbonate) and poly(glycolic-acid)-co-(trimethylene-carbonate), which are both biodegradable polymers with the same segment of flexible trimethylene-carbonate in order to accelerate the degradation rate of poly(lactic-acid)-co-(trimethylene carbonate) substrate and improve its mechanical properties. Besides, we further fabricate the porous poly(lactic-acid)-co-(trimethylene-carbonate)/poly(glycolic-acid)-co-(trimethylene-carbonate) scaffolds with uniform microstructure by the 3D extrusion printing technology in a mild printing condition. The physicochemical properties of the poly(lactic-acid)-co-(trimethylene-carbonate)/poly(glycolic-acid)-co-(trimethylene-carbonate) and the 3D printing scaffolds were investigated by universal tensile dynamometer, fourier transform infrared reflection (FTIR), scanning electron microscope (SEM) and differential scanning calorimeter (DSC). Meanwhile, the degradability of the PLLA-TMC/GA-TMC was performed in vitro degradation assays. Compared with PLLA-TMC group, PLLA-TMC/GA-TMC groups maintained the decreasing T_g, higher degradation rate and initial mechanical performance. Furthermore, the PLLA-TMC/GA-TMC 3D printing scaffolds provided shape-memory ability at 37 ℃. In summary, the PLLA-TMC/GA-TMC can be regarded as an alternative substitution material for bone tissue engineering.     

3D打印技术制备生物医用高分子材料的研究进展

3D打印技术能够根据不同患者需要,快速精确制备适合不同患者的个性化生物医用高分子材料,并能同时对材料的微观结构进行精确控制.因此,这种新兴的医用高分子材料制备技术在未来生物医学应用(尤其是组织工程应用)中具有独特的优势.近年来,对于3D打印技术制备生物医用高分子材料的研究开发受到了越来越多的关注.不同的生物相容高分子原料被应用于3D打印技术,而这些3D成型高分子材料被用于体外细胞培养,或动物模型的软组织或硬组织修复中.本文主要介绍了近年来3D打印技术在生物医用高分子材料制备中的研究进展,并对该领域的未来应用和挑战进行了展望.     

Exosome-Hydrogel System in Bone Tissue Engineering: A Promising Therapeutic Strategy

Exosomes, as messengers of cell-to-cell communication, have many functional properties similar to those of their derived cells. Because they contain a large number of bioactive components that regulate recipient cell behavior, they are inanimate and do not require external maintenance or assistance. Various cell-derived exosomes are involved in many physiological processes of bone tissue repair. Hydrogels are widely used as scaffolding materials for bone tissue repair because their 3D network structure resembles the natural extracellular matrix. Moreover, their material properties and biological functions are adjustable. Exosomes can be delivered directly to the bone tissue damage site by hydrogel, and their duration of action in vivo can be prolonged by slow release. Therefore, the exosome-loaded hydrogel (Exo-Gel) system is a promising material for bone tissue engineering. In this study, the progress of the application of Exo-Gel in bone tissue repair and the improvement strategies, problems and research prospects of the current exosomes and hydrogels that have been applied to the Exo-Gel system for bone tissue repair are reviewed.     

非共价键交联海藻酸钠水凝胶的制备与性能

天然多糖海藻酸钠制备的水凝胶具有优越的生物相容性和生物组织相似性,作为生物医用材料在药物控制释放、组织工程支架、抗菌材料及创伤敷料等领域发挥着越来越大的作用。本文在介绍海藻酸钠物化性质的基础上,重点综述了非共价键交联(静电作用、氢键、范德华力、亲疏水作用等)海藻酸钠水凝胶的制备方法以及性能表征方法,最后讨论了制备方法及性能表征研究中的一些需要解决的问题。     

The contribution of rheology for designing hydroxyapatite biomaterials

As a result of aging populations in the industrialized world, the development of biomaterials for bone tissue engineering is becoming increasingly important. Rheology, which is a key parameter in process engineering, plays a decisive role in designing these biomaterials. As a prime example of biomaterials engineering, this review focuses on formulations that are based on hydroxyapatite (HAp). More specifically, we will discuss the contribution of rheology for designing injectable bone replacement materials, composite gel scaffolds, porous scaffolds and scaffolds that can be generated using rapid prototyping or 3D printing techniques.     

Fabricating gradient hydrogel scaffolds for 3D cell culture

Optimizing cell-material interactions is critical for maximizing regeneration in tissue engineering. Combinatorial and high-throughput (CHT) methods can be used to systematically screen tissue scaffolds to identify optimal biomaterial properties. Previous CHT platforms in tissue engineering have involved a two-dimensional (2D) cell culture format where cells were cultured on material surfaces. However, these platforms are inadequate to predict cellular response in a three-dimensional (3D) tissue scaffold. We have developed a simple CHT platform to screen cell-material interactions in 3D culture format that can be applied to screen hydrogel scaffolds. Herein we provide detailed instructions on a method to prepare gradients in elastic modulus of photopolymerizable hydrogels.