高稳定性化学交联聚乙烯醇/聚乙烯吡咯烷酮碱性固体电解质膜

碱性固体电解质膜的稳定性是影响其在电化学领域应用的一个重要因素.本文在前期研究工作的基础上,通过直接共混和化学交联修饰制备出了聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)碱性聚合物电解质膜.采用傅里叶变换红外(FTIR)光谱、热重分析(TGA)、扫描电镜(SEM)和交流阻抗等方法详细考察了复合膜的分子结构、热稳定性、化学稳定性、氧化稳定性和尺寸稳定性.红外光谱结果表明,PVP成功地混入聚合物基体中,在1672cm-1处表现出来自于PVP第I带C襒O的强吸收峰.TGA结果表明,提高掺杂的KOH溶液浓度对PVA/PVP碱性膜的热稳定性没有明显影响.SEM分析结果表明,复合膜经高温、高浓度碱(80℃,10mol·L-1)处理后,其断面结构仍致密均匀,未出现类似小孔等膜降解情况,此时膜电导率(1.58×10-3S·cm-1)相比室温相同碱液时提高91.5%,表明PVA/PVP膜具有很好的耐碱化学稳定性.同时,PVA/PVP碱性膜表现出良好的抗氧化性,在60℃的3%和10%H2O2溶液中处理均没有观察到明显的质量损失,150h后仍能保持原膜质量的89%和85%.此外,由于膜内形成致密的内互交联网络结构,复合膜在水中800h之后也表现出很好的同向性和电导率稳定性.     

Enhanced mobility and environmental stability in all organic field‐effect transistors: The role of high dipole moment solvent

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1533–1542     

n-channel polymers by design: optimizing the interplay of solubilizing substituents, crystal packing, and field-effect transistor characteristics in polymeric bithiophene-imide semiconductors

Electron transporting (n-channel) polymer semiconductors for field-effect transistors are rare. In this investigation, the synthesis and characterization of new electron-depleted N-alkyl-2,2'-bithiophene-3,3'-dicarboximide-based pi-conjugated homopolymers and copolymers containing the 2,2'-bithiophene unit are reported. A novel design approach is employed using computational modeling to identify favorable monomer properties such as core planarity, solubilizing substituent tailorability, and appropriate electron affinity with gratifying results. Monomeric model compounds are synthesized to confirm these properties, and a crystal structure reveals a short 3.43 A pi-pi stacking distance with favorable solubilizing substituent orientations. A family of 10 homopolymers and bithiophene copolymers is then synthesized via Yamamoto and Stille polymerizations, respectively. Two of these polymers are processable in common organic solvents: the homopolymer poly(N-(2-octyldodecyl)-2,2'-bithiophene-3,3'-dicarboximide) (P1) exhibits n-channel FET activity, and the copolymer poly(N-(2-octyldodecyl)-2,2':5',2':5',2'-quaterthiophene-3,3'-dicarboximide) (P2) exhibits air-stable p-channel FET operation. After annealing, P1 films exhibit a very high degree of crystallinity and an electron mobility > 0.01 cm (2) V(-1) s(-1) with a current on-off ratio of 10 (7), which is remarkably independent of film-deposition conditions. Extraordinarily, P1 films also exhibit terracing in AFM images with a step height matching the X-ray diffraction d spacing, a rare phenomenon for polymeric organic semiconductors. Another fascinating property of these materials is the air-stable p-channel FET performance of annealed P2 films, which exhibit a hole mobility of approximately 0.01 cm(2) V(-1) s(-1) and a current on-off ratio of 10(7).     

Organic transistors in the new decade: Toward n-channel,printed, and stabilized devices

Significant progress has been made in designing organic semiconducting materials (OSCs) for the past few decades for organic field-effect transistors (OFETs). Much attention has been paid to the development of p-channel OSCs, with less but highly significant progress on n-channel OSCs. In this review, we focus on the advances made with OFETs in the last few years to achieve high performance in n-channel modes, air stability, and solution processability, leading to printable active electronics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Halogenated 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene: applications for ambipolar air-stable organic field-effect transistors

Density functional theory calculations were performed to explore the influence of halogenation on the reorganization energies (λ), adiabatic ionization potentials (IPs), adiabatic electron affinities (EAs), and air stabilities of a series of pentacene (PENT) and tetraceno[2,3-b]thiophene (TbTH) derivatives. According to calculated IP and EA values, all well-known PENT and TbTH derivatives in this paper are air-stable p-channel but not air-stable n-channel organic field-effect transistors (OFETs) due to insufficient EAs, consistent with experimental observations. The calculated results show that attaching two or more halogen atoms onto air-unstable 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene (TIPS-N4PENT) is sufficient for promoting ambipolar air-stable properties. The electronic coupling and band structure calculations indicate that halogenated TIPS-N4PENT derivatives have potential applications in high-performance ambipolar air-stable OFETs. They also provide rational guidelines for the design of ambipolar air-stable organic semiconductors (OSCs).     

Low-bandgap conjugated polymers based on benzodipyrrolidone with reliable unipolar electron mobility exceeding 1 cm~2 V~(-1) s~(-1)

The employment of an intrinsic quinoidal building block, benzodipyrrolidone(BDP), on constructing conjugated polymers(PBDP-2F and PBDP-2CN) with high electron mobility and unipolar transport characteristic in polyethylenimine ethoxylated(PEIE) modified organic field-effect transistors(OFETs) is reported. The intrinsic quinoidal characteristic and excellent coplanarity of BDP can lower the lowest unoccupied molecular orbital(LUMO) levels and improve ordered interchain packing of the resulting polymers in solid states, which are favorable for electron-injection and transport. By using PEIE as the interlayer to block the hole injection, unipolar n-type transport characteristics with high electron mobility of 0.58 and 1.01 cm~2 V~(-1) s~(-1) were achieved by the OFETs based on PBDP-2F and PBDP-2CN, respectively. More importantly, the extracted mobilities are highly reliable with the reliability factor of above 80%. To the best of our knowledge, PBDP-2CN is the very first quinoid-based conjugated polymer with reliable electron mobility exceeding 1 cm~2 V~(-1) s~(-1). This work represents a significant step in exploring intrinsic quinoidal CPs for application in n-channel OFETs and logic complementary circuits.     

Long-range ordering of composites for organic electronics: TIPS-pentacene single crystals with incorporated nano-fibers

Fluorescent nanofibers are incorporated into high-mobility single-crystals without substantially disrupting crystalline lattice, demonstrating a strategy to multifunctionalize semiconducting single-crystals.     

Transport properties of ions through temperature-responsive charged membranes prepared using poly(vinyl alcohol)/poly(N-isopropylacrylamide)/poly(vinyl alcohol-co-2-acrylamido-2-methylpropane sulfonic acid)

Temperature-responsive charged membranes were prepared from the polymer mixture of poly(vinyl alcohol) (PVA), in situ polymer of N-isopropylacrylamide (NIPAAm) and PVA, and a polyanion [poly(vinyl alcohol-co-2-acrylamido-2-methylpropane sulfonic acid)]. The membranes were cross-linked under several conditions. The relationship between the preparation conditions and the water content response to temperature change, rH, and the charge density response to temperature change, rCx, was investigated. The membrane cross-linked with glutaraldehyde after annealing has the highest rH and rCx in all the membranes. rCx decreases with increasing polyanion content, and increases with increasing poly(NIPAAm) content. Permeation experiments in a dialysis system consisting of the membrane and mixed KCl and CaCl₂ solutions show that the transport modes of Ca²⁺ ions through the membrane are controlled by temperature changes in two ways: downhill transport (transport along their own concentration gradient in a system) at temperatures below the lower critical solution temperature (LCST) of poly(NIPAAm); uphill transport (transport against their concentration gradient) at temperatures above the LCST.     

聚(茚并芴-三苯胺)的合成及性能

设计并合成了一类新的可用于有机场效应晶体管(OFET)的聚合物半导体材料聚(茚并芴-三苯胺)(pIFTPA1~4), 通过核磁共振谱和凝胶渗透色谱等对聚合物进行了表征, 同时对其场效应薄膜晶体管性能进行了测试. 结果表明, 这些聚合物形成了无定形半导体膜, 在空气中稳定, 其载流子迁移率远高于聚三苯胺(pTPA)类材料, 其中pIFTPA1载流子迁移率高达4×10^-2 cm²/(V·s), 开关比为10⁶.     

Aligned polymer fibers produced via an additive electric field

Electrospinning is known to be a highly versatile method to produce nanofibers, and several techniques have been developed to align nanofibers. In this paper, poly(vinyl alcohol) (PVA), poly(vinylpyrrolidone) (PVP), poly(propylene carbonate) (PC), poly(ethylene oxide) (PEO), PVA/Chitosan and PVA/Fe₃O₄ uniaxially aligned ultrafine fibers were obtained with electrospinning method by adding another electric field in the collection area. Alignment of the nanofibers was characterized by the use of digital cameras and field emission scanning electron microscopy, polarized Fourier transform infrared spectroscopy (FTIR), and wideangle X-ray diffraction (XRD). The mechanism of fiber alignment was investigated as well.     

Fracture surface morphology and phase relationships of polystyrene/poly(methyl methacrylate) systems. I. Low-molecular-weight polystyrene in poly(methyl methacrylate)

Samples of low-molecular-weight polystyrene (PS) in poly(methyl methacrylate) (PMMA) were prepared by first dissolving PS in methyl methacrylate monomer and then polymerizing the monomer. Forty-three specimens of varying number-average molecular weight (2100–49,000) and composition (5–40 wt %) of PS were prepared, and the surface morphology and phase relationships studied by scanning electron microscopy. Four distinct types of phase relationships were observed: (i) a single phase consisting of PS dissolved in PMMA; (ii) PS dispersed in PMMA; (iii) PMMA dispersed in PS; and (iv) regions of PS dispersed in PMMA coexisting with regions of PMMA dispersed in PS. Values of the size and population density of the dispersed particles are reported. Finally, the size and distribution of the dispersed particles and the various types of phase relationships are discussed in terms of the ternary polystyrene/poly(methyl methacrylate)/methyl methacrylate phase diagram.     

低温水相合成巯基化聚乙烯醇/CdS量子点纳米复合物及用于测定环境水样中痕量Cu~(2+)

采用水相合成法,在低温N2气保护条件下,以巯基化聚乙烯醇(PVA)为基体材料合成一种环境友好型PVA/CdS量子点纳米复合物,并通过红外光谱(IR)、X射线粉末衍射(XRD)、透射电子显微镜(TEM)、热重(TG)、荧光光谱(PL)和紫外可见光谱(UV-Vis)等技术手段对复合物进行结构表征和光学性能研究。测试结果表明,复合物中CdS量子点为立方晶型结构,形状为球形,粒径小于5nm,具有很好的稳定性、分散性及发光性质。此外,Cu~(2+)对PVA/CdS水溶液荧光具有良好的猝灭作用,其荧光猝灭程度与Cu~(2+)浓度在1~1000nmol/L范围内呈良好的线性关系,线性相关系数为0.9923,方法检出限为0.12nmol/L。该纳米复合物荧光分析方法简便快速、灵敏度高、检出限低,已应用于实际黄河水样中痕量Cu~(2+)的分析与检测。     

Emulsifying effect of graft copolymer for the homopolymer

Precipitation of poly(methyl methacrylate) (PMMA) from dimethyl sulfoxide solution by addition of water as a precipitant was studied in the presence of a well-characterized graft copolymer of poly(vinyl alcohol) (PVA). The graft copolymer which had been prepared by a radiation method and freed from PMMA and PVA homopolymers had one PMMA branch whose length was nearly equal to that of the PVA backbone. Even when such an amount of water was added to PMMA solution as to cause all the PMMA to precipitate from the solution, the precipitation was prevented by the presence of relatively small amounts of the graft copolymer. With decreasing molecular weight of PMMA, the effect of protection became more pronounced. When the precipitation was prevented, the solution was transformed into a stable emulsion. The mechanism of protection against precipitation was discussed on the basis of the results obtained and electron microscopic photographs of the emulsion particles. It was concluded that the particles of the precipitated homopolymer were covered by a monolayer of the graft copolymer, resulting in prevention of coagulation.     

PVA/PVP共混物的SAXS研究

聚乙烯醇(PVA)/聚吡咯烷酮(PVP)共混物的小角X-射线散射(SAXS)研究表明,PVA/PVP共混物的结构参数与共混物组分比及热历史密切相关。按Vonk一维电子密度相关函数法,得到PVA/PVP共混物的长周期,过渡层厚随PVP组分含量增加而增加;结晶片层厚和比内表面积却随PVP含量增加而降低。热处理可提高共混物的结晶性。     

Miscibility and hydrogen-bonding behavior in organic/inorganic polymer hybrids containing octaphenol polyhedral oligomeric silsesquioxane

In this study, we investigated the miscibility behavior and mechanism of interaction of poly(methyl mechacrylate) (PMMA), poly(vinyl pyrrolidone) PVP, and PMMA- co-PVP blends with octa(phenol)octasilsequioxane (OP-POSS). For the PMMA/OP-POSS binary blend, the value of the association constant ( K A = 29) was smaller than that in the poly(vinyl phenol) (PVPh)/PMMA ( K A = 37.4) and ethyl phenol (EPh)/PMMA ( K A = 101) blend systems, implying that the phenol groups of the OP-POSS units in the PMMA/OP-POSS blends interacted to a lesser degree with the CO groups of PMMA than they did in the other two systems. In addition, the ionic conductivity of a LiClO4/PMMA- co-PVP polymer electrolyte was increased after blending with OP-POSS.     

Preparation and thermal characterization of poly(2‐vinylpyridine) copolymers coordinated to Cr nanoparticles

In this study, polystyrene‐block‐poly(2‐vinylpyridine), PS‐b‐P2VP, polyisoprene‐block‐poly(2‐vinylpyridne), PI‐b‐P2VP and poly(methyl metacrylate)‐block‐poly(2‐vinylpyridine), PMMA‐b‐P2VP, coordinated to Cr metal were synthesized and characterized by Fourier transform infrared, transmission electron microscopy and direct pyrolysis mass spectrometry techniques. Both thermal degradation mechanism and thermal stability of P2VP blocks were affected by the coordination of Cr nanoparticles to nitrogen of pyridine rings. Thermal decomposition of P2VP blocks was started by loss of pyridine units leaving an unsaturated and/or crosslinked polymer backbone that degraded at relatively high temperatures. Incorporation of Cr metal did not noticeably influence thermal behavior of PS and PI blocks. However, increase in thermal stability of PMMA block was detected and associated with inhibition of the interactions between carbonyl groups of MMA chains with nitrogen atom of pyridine ring as a consequence of coordination to metal. Copyright © 2015 John Wiley & Sons, Ltd.     

Assembly of oriented zeolite monolayers and thin films on polymeric surfaces via hydrogen bonding

The b-oriented monolayers of microsized silicalite-1 crystals have been manually assembled on glass plate supported poly(ethylene oxide) (PEO), poly(vinyl alcohol) (PVA), chitosan, and poly(methyl methacrylate) (PMMA) thin films via hydrogen bonding with much enhanced binding strength and satisfactory degrees of coverage and close packing. The exerted pressure and rubbing time in the manual assembly do not affect the binding strength of the silicalite-1 monolayer on the glass plate supported polymeric film. This manual assembly has been further applied to fabricate zeolite monolayers on commercially available Plexiglas surfaces and b-oriented multilayered films of silicalite-1 crystals on glass plates. The assembly method established in this study provides a feasible way to produce zeolite monolayers on polymer-modified solid substrates and Plexiglas and to fabricate zeolite-polymer composite membranes by means of the layer-by-layer technique.     

玻璃基板作用下高分子共混物薄膜相形态发展过程

研究了玻璃基板作用下极性高聚物为低组分的共混物薄膜在退火条件下相形态的发展过程 .选用聚苯乙烯 (PS) 聚甲基丙烯酸甲酯 (PMMA)与聚苯乙烯 (PS) 聚ε 己内酯 (PCL)两个体系 ,在玻璃基板上Spin Coating成膜后退火 .由于共混物薄膜中极性相对较大的高聚物组分 (PMMA和PCL)相对于极性较小的PS组分对玻璃基板具有更好的润湿性 ,所以在上述的两个共混薄膜体系中其相形态分别显示PMMA和PCL在低组分比例下最终发展成为连续相 .利用扫描电镜以及元素分析很好地验证了以上的结论 ,并且对其机理进行了解释 .此外 ,改变PS的分子量与PCL共混 ,研究了组分粘度对薄膜相形态发展的影响 .结果表明 ,PS组分粘度越大 ,共混物薄膜相结构发展速度越慢     

Study of the morphology of the three-phase contact line and its evolution by morphological examination after droplet evaporation of aqueous polymer solutions

The local morphology and its evolution of an air-liquid-solid three-phase contact line was studied on the homogeneous surfaces of homopolymer of polystyrene (PS) and poly(methyl methacrylate) (PMMA) and the nanostructured surface of diblock copolymer of PS- b-PMMA by the approach of the morphological study of the residual solid after droplet evaporation of water-soluble polymers such as poly(vinylpyrrolidone) (PVP) and poly(acrylic acid). The observation by atomic force microscopy discovered the stripelike "button-and-ribbon" structure of the precipitated polymer solute along the moving direction of the contact line. On the surface of PS- b-PMMA, the morphology of PVP has a close correlation with the nanostructure of PS- b-PMMA. The results exhibit the local morphology of the contact line and its evolution, revealing its pinning and depinning processes on the nanometer scale.     

燃料电池用聚乙烯醇基碱性聚合物电解质膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇(PVA)、聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)和聚乙烯醇/聚乙二醇二甲醚(PVA/PEGDE)碱性聚合物电解质膜详细考察了膜的外观形貌、微观结构、热稳定性、离子电导率和化学稳定性等.结果表明,PVA与PVP以及PEGDE具有很好的相容性,所制备的复合膜断面致密...