Progress of pyrene-based organic semiconductor in organic field effect transistors

Thanks to the pure blue emitting, high planarity, electron rich and ease of chemical modification, pyrene has been thoroughly investigated for applications in organic electronics such as organic light emitting diodes (OLEDs), organic field effect transistors (OFETs), and organic solar cells (OSCs). Especially, great progresses have been made of pyrene-based organic semiconductors for OFETs in past decades. Due to the difference of molecular structure, pyrene-based organic semiconductors are divided into three categories, pyrene as terminal group, pyrene as center core and fused pyrene derivatives. This minireview gives a brief introduction of the structure-property relationship and application in OFETs about most of pyrene-based semiconducting materials since 2006, illustrating that pyrene is a good building block to construct semiconductors with superior transport property for OFETs. Finally, we provide a summary concerning the methodology to improve the transport property of the pyrene-based semiconducting materials as well as an outlook.     

Synthesis and Application of Rylene Imide Dyes as Organic Semiconducting Materials

Rylene imide dyes have been among the most promising organic semiconducting materials for several years due to their remarkable optoelectronic properties and high chemical/thermal stability. In the past decades, various excellent rylene imide dyes have been developed for optoelectronic devices, such as organic solar cells (OSCs) and organic field‐effect transistors (OFETs). Recently, tremendous progress of perylene diimides (PDIs) and their analogues for use in OSCs has been achieved, which can be attributed to their ease of functionalization. In this review, we will mainly focus on the synthetic strategies toward to latest PDI dyes and higher rylene imide analogues. A variety of compounds synthesized from different building blocks are summarized, and some properties and applications are discussed.     

Halogenated 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene: applications for ambipolar air-stable organic field-effect transistors

Density functional theory calculations were performed to explore the influence of halogenation on the reorganization energies (λ), adiabatic ionization potentials (IPs), adiabatic electron affinities (EAs), and air stabilities of a series of pentacene (PENT) and tetraceno[2,3-b]thiophene (TbTH) derivatives. According to calculated IP and EA values, all well-known PENT and TbTH derivatives in this paper are air-stable p-channel but not air-stable n-channel organic field-effect transistors (OFETs) due to insufficient EAs, consistent with experimental observations. The calculated results show that attaching two or more halogen atoms onto air-unstable 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene (TIPS-N4PENT) is sufficient for promoting ambipolar air-stable properties. The electronic coupling and band structure calculations indicate that halogenated TIPS-N4PENT derivatives have potential applications in high-performance ambipolar air-stable OFETs. They also provide rational guidelines for the design of ambipolar air-stable organic semiconductors (OSCs).     

Electron transporting semiconducting polymers in organic electronics

Significant progress has been achieved in the preparation of semiconducting polymers over the past two decades, and successful commercial devices based on them are slowly beginning to enter the market. However, most of the conjugated polymers are hole transporting, or p-type, semiconductors that have seen a dramatic rise in performance over the last decade. Much less attention has been devoted to electron transporting, or n-type, materials that have lagged behind their p-type counterparts. Organic electron transporting materials are essential for the fabrication of organic p-n junctions, organic photovoltaic cells (OPVs), n-channel organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs) and complementary logic circuits. In this critical review we focus upon recent developments in several classes of electron transporting semiconducting polymers used in OLEDs, OFETs and OPVs, and survey and analyze what is currently known concerning electron transporting semiconductor architecture, electronic structure, and device performance relationships (87 references).     

Recent structural evolution of lactam- and imide-functionalized polymers applied in organic field-effect transistors and organic solar cells

Organic semiconductor materials, especially donor–acceptor (D–A) polymers, have been increasingly applied in organic optoelectronic devices, such as organic field-effect transistors (OFETs) and organic solar cells (OSCs). Plenty of high-performance OFETs and OSCs have been achieved based on varieties of structurally modified D–A polymers. As the basic building block of D–A polymers, acceptor moieties have drawn much attention. Among the numerous types, lactam- and imide-functionalized electron-deficient building blocks have been widely investigated. In this review, the structural evolution of lactam- or imide-containing acceptors (for instance, diketopyrrolopyrrole, isoindigo, naphthalene diimide, and perylene diimide) is covered and their representative polymers applied in OFETs and OSCs are also discussed, with a focus on the effect of varied structurally modified acceptor moieties on the physicochemical and photoelectrical properties of polymers. Additionally, this review discusses the current issues that need to be settled down and the further development of new types of acceptors. It is hoped that this review could help design new electron-deficient building blocks, find a more valid method to modify already reported acceptor units, and achieve high-performance semiconductor materials eventually.

This review highlights the recent structural evolution of lactam- and imide-functionalized polymers applied in organic field-effect transistors and organic solar cells.     

Electron transport in solution-grown TIPS-pentacene single crystals: Effects of gate dielectrics and polar impurities

The n-channel behavior has been occasionally reported in the organic field-effect transistors (OFETs) that usually exhibit p-channel transport only. Reconfirmation and further examination of these unusual device performances should deepen the understanding on the electron transport in organic semiconductors. 6,13-bis(triisopropyl-silylethynyl) pentacene (TIPS-pentacene), a widely examined p-channel material as Au is used for source-drain electrodes, has recently been reported to exhibit electron transport when grown from non-polar solvent on divinyltetramethyldisiloxanebis (benzocyclobutene) (BCB) dielectric, spurring the study on this unusual electron transport. This paper describes FET characteristics of solution-grown TIPS-pentacene single crystals on five polymer gate dielectrics including polystyrene (PS), poly(methyl methacrylate) (PMMA), poly(4-vinyl phenol) (PVP), poly(vinyl alcohol) (PVA) and poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)). In addition to the p-channel behavior, electron transport occurs in the crystals on PMMA, PS, thick PVA (40 nm) and a bilayer dielectric of PMMA on P(VDF-TrFE-CFE), while does not on PVP and thin PVA (2 nm). The two distinct FET characteristics are consistent with the previous reported trap effect of hydroxyl groups (in PVP and PVA) and reduced injection barrier by Na⁺ ions (as impurity in PVA). The highest electron mobility of 0.48 cm² V^-1 s^-1 has been achieved in the crystals on PMMA. Furthermore, the electron transport is greatly attenuated after the crystals are exposed to the vapor of a variety of polar solvents and the attenuated electron transport partially recovers if the crystals are heated, indicating the adverse effect of polar impurities on electron transport. By reconfirming the n-channel behavior in the OFETs based on TIPS-pentacene, this work has implications for the design of n-channel and ambipolar OFETs.     

Recent Advances in Isoindigo‐Inspired Organic Semiconductors

Over the past decade, isoindigo has become a widely used electron‐deficient subunit in donor‐acceptor organic semiconductors, and these isoindigo‐based materials have been widely used in both organic photovoltaic (OPV) devices and organic field effect transistors (OFETs). Shortly after the development of isoindigo‐based semiconductors, researchers began to modify the isoindigo structure in order to change the optoelectronic properties of the resulting materials. This led to the development of many new isoindigo‐inspired compounds; since 2012, the Kelly Research Group has synthesized a number of these isoindigo analogues and produced a variety of new donor‐acceptor semiconductors. In this Personal Account, recent progress in the field is reviewed. We describe how the field has evolved from relatively simple donor‐acceptor small molecules to structurally complex, highly planarized polymer systems. The relevance of these materials in OPV and OFET applications is highlighted, with particular emphasis on structure‐property relationships.     

Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

Enhanced mobility and environmental stability in all organic field‐effect transistors: The role of high dipole moment solvent

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1533–1542     

Fully printed flexible audio system on the basis of low‐voltage polymeric organic field effect transistors with three layer dielectric

Fully mass printed, flexible and truly polymeric organic field effect transistors consisting of a three layer dielectric made of CYTOP (low‐k), PVA (intermediate) and P(VDF‐TrFE‐CTFE)(high‐k) are introduced. Gravure‐, flexo‐and screen printing were selected as highly productive manufacturing technologies. These OFETs work at strongly reduced voltages and show high field effect mobility (µ = 0.2 cm²/Vs) and remarkable good bias stress stability at very high current density (50 µA/mm). Fully printed OFETs are used for the realization of ring oscillators working in the kHz regime at reduced supply voltage (10 V). In combination with printed fully polymeric piezoelectric loudspeakers, this work shows for the first time fully printed flexible audio systems. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1409–1415     

Highly efficient modulation of the electronic properties of organic semiconductors by surface doping with 2D molecular crystals

Doping is a critically important strategy to modulate the properties of organic semiconductors(OSCs) to improve their optoelectrical performances. Conventional bulk doping involves the incorporation of foreign molecular species(i.e., dopants) into the lattice of the host OSCs, and thus disrupts the packing of the host OSCs and induces structural defects, which tends to reduce the mobility and(or) the on/off ratio in organic field-effect transistors(OFETs). In this article, we report a highly efficient and highly controllable surface doping strategy utilizing 2D molecular crystals(2DMCs) as dopants to boost the mobility and to modulate the threshold voltage of OFETs. The amount of dopants, i.e., the thickness of the 2DMCs, is controlled at monolayer precision, enabling fine tuning of the electrical properties of the OSCs at unprecedented accuracy. As a result, a prominent increase of the average mobility from 1.31 to 4.71 cm~2 V~(-1) s~(-1) and a substantial reduction of the threshold voltage from -18.5 to -1.8 V are observed. Meanwhile, high on/off ratios of up to 10~8 are retained.     

High-performance organic field-effect transistors: molecular design, device fabrication, and physical properties

In the past decade, tremendous progress has been made in organic field-effect transistors (OFETs). Their real applications require further development of device performance. OFETs consist of organic semiconductors, dielectric layers, and electrodes. Organic semiconductors play a key role in determining the device characteristics. The properties of the organic semiconductors, such as molecular structure and packing, as well as molecular energy levels, can be properly controlled by molecular design. Therefore, we designed and synthesized a series of organic molecules. The synthesized organic semiconductors exhibit excellent field-effect properties due to strong intermolecular interactions and proper molecular energy levels. Meanwhile, the influence of the device fabrication process, organic semiconductor/dielectric layer interface, and organic layer/electrode contact on the device performance was investigated. A deep understanding of these factors is helpful to improve field-effect properties. Furthermore, single-crystal field-effect transistors are highlighted because the single-crystal-based FETs can provide an accurate conducting mechanism of organic semiconductors and higher device performance as compared with thin film FETs.     

新型共轭聚合物的设计合成及其在场效应晶体管的应用

近年来,有机场效应晶体管(OFETs)由于在柔性器件和可穿戴电子学中的潜在应用受到了学术界和工业界的普遍关注,尤其是以聚合物半导体材料构筑的晶体管性能得到了快速的发展.如何设计合成用于OFETs的高性能聚合物半导体材料,一直是我们的追求目标.然而,分子结构对迁移率的影响仍缺少系统的比较.本文综述了近年来国内外新型聚合物材料的最新进展.我们按照材料的种类以及载流子的传输类型进行了分类,对高性能聚合物材料的发展过程、材料的设计思路以及相应的FETs性能进行了系统地归纳总结.通过研究分子及分子聚集态结构与器件性能之间的关系,希望为以后设计合成新型的高性能的聚合物材料提供有益的借鉴和指导.     

Corannulene derivatives for organic electronics: From molecular engineering to applications

This paper intends to provide an overview for using corannulene derivatives in organic electronics such as organic field-effect transistors (OFETs), organic solar cells (OSCs), and organic light-emitting diodes (OLEDs). We highlight the rational design strategies, tuning molecular orbital energy levels and arrangement in single crystals of corannulenes. The topological structure and properties of corannulene make it a unique candidate for organic electronics.     

Incremental optimization in donor polymers for bulk heterojunction organic solar cells exhibiting high performance

The power conversion efficiency of an organic solar cell has now exceeded the 10% mark, which is a significant improvement in the last decade. This has been made possible due to the development of low-band-gap polymers with tunable electron affinity, ionization potential, solubility, and miscibility with the fullerene acceptor, and the improved understanding of the factors affecting the critical device parameters such as the V_OC and the J_SC. This review examines the latest strategies, results, and trends that have evolved in the design of solar cells with better efficiency and durability. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Influence of molecular weight on the short‐channel effect in polymer‐based field‐effect transistors

In this study, we demonstrate how the intrinsic properties of a polymer can influence the electrical characteristics of organic field‐effect transistors (OFETs). OFETs fabricated with three batches of poly[2‐methoxy,5‐(3′,7′‐dimethyl‐octyloxy)]‐p‐phenylene vinylene (MDMO‐PPV) were investigated. The properties of the polymers were initially investigated using Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy (IS), gel permeation chromotography (GPC), and cyclic voltammetry (CV), respectively. The structure and purity of the polymer batches were found to be very comparable, but the molecular weight (M_n and M_w) and polydispersity (PDI = M_w/M_n), varied between the samples and the HOMO and LUMO levels of the polymers were found to depend on the molecular weight properties. OFETs were then fabricated with the polymers and electrically characterized. It was observed that the channel current and the field‐effect mobility increase with increasing polymer molecular weight. The output characteristics of the transistors, on the other hand, were found to depend on the PDI of the polymer. Saturation of the channel current occurs at higher source–drain voltages and short‐channel behavior was observed to start at longer channel lengths for polymers with a higher PDI. This behavior is observed to be thickness dependent, and the short‐channel behavior was more pronounced for thicker MDMO‐PPV films. These results are explained in terms of influences of chain packing and ordering and high bulk currents on the FET output and transistor parameters. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 117–124, 2012     

Towards Green Synthesis and Processing of Organic Solar Cells

In 2018, several major breakthroughs have been achieved in organic solar cells (OSCs) with the record power conversion efficiency (PCE) reaching over 17 %. With this increased efficiency, it is time to take a step forward to consider how to convert this technology into large scale production. For this, the economic and environmental profile of OSCs should be taken seriously‐simplified synthetic routes and green chemistry methods should be applied. According to previous studies, OSCs are competitive and profitable in the commercial market. However, toxic and/or hazardous chemicals are currently used in materials synthesis and device fabrication of OSCs. In this account, we will talk about contributions and efforts we have made to minimize the economic and environmental disadvantages in the production of OSCs. We will start with the background on how our projects were conceived and will specifically discuss our work on direct arylation and green solvent. Developments of direct arylation for synthesizing conjugated polymers will be illustrated along with our recent finding regarding the effect of green solvents on device performance and stability.     

Potential of Nonfullerene Small Molecules with High Photovoltaic Performance

Over the past decades, fullerene derivatives have become the most successful electron acceptors in organic solar cells (OSCs) and have achieved great progress, with power conversion efficiencies (PCEs) of over 11 %. However, fullerenes have some drawbacks, such as weak absorption, limited energy‐level tunability, and morphological instability. In addition, fullerene‐based OSCs usually suffer from large energy losses of over 0.7 eV, which limits further improvements in the PCE. Recently, nonfullerene small molecules have emerged as promising electron acceptors in OSCs. Their highly tunable absorption spectra and molecular energy levels have enabled fine optimization of the resulting devices, and the highest PCE has surpassed 12 %. Furthermore, several studies have shown that OSCs based on small‐molecule acceptors (SMA) have very efficient charge generation and transport efficiency at relatively low energy losses of below 0.6 eV, which suggests great potential for the further improvement of OSCs. In this focus review, we analyze the challenges and potential of SMA‐based OSCs and discuss molecular design strategies for highly efficient SMAs.     

有机场效应晶体管应用于化学及生物传感的研究进展

有机场效应晶体管(OFETs)是以有机半导体材料作为有源层的晶体管器件。和传统的无机半导体器件相比,由于其具有成本低、易加工、柔性好和生物相容性而被人们广泛研究,在多种化学和生物传感器领域具有潜在而广泛的应用前景。本文简单介绍了OFETs的结构和工作原理,总结了近几年来OFETs在化学及生物传感方面的研究进展,最后对OFETs的发展方向做了归纳和展望。     

Rational design of diarylethylene-based polymeric semiconductors for high-performance organic field-effect transistors

Constructing planar, rigid, and high electronically delocalized π-conjugated molecular system is the most basic requirements of obtaining high-performance polymeric semiconductors for organic field-effect transistors (OFETs). In this regard, diarylethylene (DAE)-based polymers show great potential because many substantive progresses related to polymer field-effect transistors had been achieved from the kind of polymer materials in recent years. In the brief review, series of DAE-based polymer are highlighted, based on which several design strategies have been summarized by the way of comparative research method. These strategies have important guiding significance not only for further developing new DAE-based and other polymeric semiconductors for OFETs but also for developing specific polymeric semiconductors for other organic electronics, such as organic photovoltaics and organic light-emitting diodes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 585–603