非完善正交异性复合矩形板在面内双向压缩作用下的后屈曲

本文是文[1,2]工作的继续,给出了非完善正交异性复合矩形板在面内双向压缩作用下后屈曲平衡路径渐近表达式。     

不同边界条件正交各向异性中厚板的振动与稳定分析

本文采用高阶剪切变形理论对正交各向异性中厚矩形板进行振动与稳定分析,数值计算采用样条有限点法,得出了六种不同边界条件矩形板的自振频率和屈曲载荷,并与相应的经典板理论的结果进行比较.结果说明横向剪切变形对复合材料层合板的影响与板的各向异性程度、板的宽厚比(b/h)、层合板的层数和板的支承条件有关,它随着层合板各向异性程度的增加而增加,随着层合板宽厚比的增加而逐渐消失.     

等参数正交异性板平面问题的解法

关于文中指出了现有文献中具有等值复参数正交异性板的平面问题的一些错误，给出了相应正确的应力场和位移场表达式；并提出一种以各向同性板平面问题比拟正交异性板平面问题的方法。     

四边转角约束正交异性板的临界载荷

考虑横向剪切变形的影响和四边弹性转角约束的边界条件,给出了一种求解正交异性板临界应力的方法。弹性转角约束的极限情况就是简支和固支。应用本给出的方法,在几种退化的情况下,对若干矩形板进行计算,并与现有献进行了比较,结果吻合较好,从而验证了中给出的方法。     

考虑剪切变形的各向同性,正交各向异性矩形板的屈曲和后屈曲

本文讨论考虑横向剪切变形的各向同性、正交各向异性矩形板的屈曲和后屈曲性态。应用Reissner理论,采用文[1]提供的摄动方法,给出了完善和非完善各向同性、正交各向异性矩形板的后屈曲平衡路径,并与薄板理论结果作了比较。     

正交异性非线性变厚度环形板的分析

讨论了正交异性非线性变厚度混凝土环形板问题.建立了荷载为q(r)及q(r)*sinnθ条件下的环形板平衡条件式,导出了挠度表达的Euler方程.据此获得一组常系数微分方程和它们的特征值,可以求解正交异性非线性变厚度环形板的挠度及内力.     

含孔系的正交异性半平面应力分析

含孔系的正交异性半平面应力分析高存法，樊蔚勋（东营石油大学，东营２５７０６２）（南京航空学院，２１００１６）关键词螺栓孔系，正交异性半平面，应力分析，复应力函数，Ｆａｂｅｒ级数１引言对于含螺栓承载孔正交异性板应力场问题的研究，目前大多局限于含一个承载...     

正交异性矩形板弯曲问题的解析解

本文对求解正交异性矩形板弯曲问题,采用先建立微分方程的一般解,然后根据边界条件确定积分常数,求解了特征方程为复数根的情形。     

含椭圆孔或裂纹的等参数正交异性板平面问题基本解

应用Ｃａｕｃｈｙ积分的方法，分别给出了含椭圆孔或裂纹的等参数正交异性板在任意面内集中载荷作用下的复应力函数基本解或应力强度因子基本解，这些基本解对于应用边界元法求解此类正交异性板或各向同性板的某些弹性力学和断裂力学问题具有重要的意义。     

屈曲黏弹性矩形板的非线性振动分岔

采用Melnikov法及Galerkin原理研究了屈曲黏弹性矩形板的非线性振动分岔,并讨论分析了长宽比、板厚等因素对屈曲黏弹性矩形板发生混沌运动区域的影响。     

The effective installation of an inclined plate for the enhancement of forced convection over rectangular sources

This paper investigates the unsteady flow and heat transfer characteristics of rectangular sources with and without an inclined plate in a channel. The results show that the installation of an inclined plate above an upstream source results in a periodically unsteady flow and it can effectively enhance the heat transfer performance. Moreover, the inclined angle of the plate is changed under different Reynolds numbers to study the heat transfer performance in the channel. Received on 18 June 1997     

Free convection boundary-layer flow above a nearly horizontal surface in a porous medium with newtonian heating

In this paper the steady free convection boundary-layer along a semi-infinite, slightly inclined (both positive and negative) to the horizontal plate embedded in a porous medium with the flow generated by Newtonian heating has been investigated. The asymptotic solution near the leading edge and the full numerical solution along the whole plate domain have been obtained numerically, whilst the asymptotic solution far downstream along the plate has been obtained analytically. For a positive inclination the full numerical solution is in agreement with the asymptotic solutions. However, for a negatively inclined plate, only the small asymptotic solution near the leading edge of the plate can be predicted giving an insight that the model for a negatively inclined plate, whilst mathematically interesting, is not physically realistic.     

Effects of an upstream inclined rod on the circular cylinder–flat plate junction flow

An inclined rod is installed upstream of a circular cylinder mounted on a flat plate to mitigate the horseshoe vortices in the junction flow. Smoke-wire visualization, hot-wire velocity measurement and surface pressure measurement are employed to study the effects of the inclined rod on the laminar and turbulent junction flows. The results show a properly placed inclined rod can significantly weaken the horseshoe vortices in front of the cylinder, depress the unsteady oscillation of the vortex system, change the separation position on the flat plate and narrow the wake of the cylinder. The inclined rod method provides a promising way to suppress the horseshoe vortices in the junction flow because of its effectiveness and its easiness to implement and adjust to fit different flow conditions.     

Drift of an inclined plate counter oncoming waves

The dependence of the velocity of the motion of a tow with an inclined plate mounted in a wave water channel on the wave parameters, the submergence depth, and the angle of inclination and dimensions of the plate is experimentally investigated. The effect of tow motion counter to the waves is detected and theoretically justified. The free surface profiles for periodic waves above an inclined plate obtained using the elolutionary system of the Boussinesq approximation equations correspond to the measured ones. The pulse generated as a result of wave breakup is estimated.     

Stress state in the vicinity of an inclined elliptical defect and stress intensity factors for biaxial loading of a plate

The problem of determining the stress state of a plate with an inclined elliptical notch under biaxial loading is considered. The Kolosov-Muskhelishvili method is used to obtain an expression for the stress near the vertex of an inclined ellipse, whose particular case are expressions for the stress in the case of an inclined crack. The stress intensity factors K _I and K _II were determined experimentally by holographic interferometry in the case of extension of a plate with an inclined crack-like defect. The calculation results are compared with experimental data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 1, pp. 118–127, January–February, 2009.     

斜交板梁桥的有限单元算法

借助斜坐标与直角坐标的关系,构造了斜交板梁单元的位移函数,由此提出了斜交板梁桥的实用有限单元算法。     

非对称薄壁箱形截面的扭转几何特性研究

为了揭示顶板单向横坡对薄壁箱形截面扭转几何特性的影响,推导了顶板为倾斜布置的非对称薄壁箱形截面扭转中心位置、主扇性坐标及主扇性惯性矩的实用计算公式。运用推导的实用公式并结合数值算例,比较顶板倾斜布置和水平布置对截面扭转几何特性的影响,并分析了顶板横坡、箱室高宽比及悬臂板宽度变化对扭转几何特性的影响规律。研究表明,本文计算值与有限元软件ANSYS中截面特性计算结果吻合很好;当不考虑顶板横坡时,对扭转中心横向位置及高腹板与底板交点处的主扇性坐标影响显著;当箱室高宽比小于0.65时,其变化对扭转中心的横向位置有显著影响;主扇性惯性矩随顶板横坡的增大而减小,随悬臂板宽度及箱室高宽比的增大而增大。     

An experimental study on the natural convection heat transfer between inclined plates (Lower plate isothermally heated and the upper plate thermally insulated as well as unheated)

Presented in this paper are the results of natural convection heat transfer between inclined parallel plates. Lower plate is heated isothermally while the upper plate is both unheated and insulated. Plate inclinations were 0^°, 30^°, 45^° measured from vertical position. Experiments were carried out for different temperature differences in air to determine the effect of plate spacing and plate inclination on heat transfer. It was found that heat transfer rate depends on plate spacing and inclination.     

Stress-strain state of an inclined elliptical defect in a plate under biaxial loading

A mathematical model for the stress-strain state of a plate with an inclined elliptical defect under biaxial loading is considered. Exact formulas for stresses in polar coordinates, displacements, principal stresses, maximum shear stress, and stress intensity in the case of a plane stress state of the plate were obtained by the Kolosov-Muskhelishvili method. Simulation results are compared with experimental data obtained by holographic interferometry.     

Impact of the slip condition on the resonance of a film flow over an inclined slippery topography plate

Meccanica - This study addresses the linear and nonlinear resonance of the film flow on an inclined slippery topography plate in the frame of long-wave theory. The influence of the surface tension...