轴对称自由振动功能梯度材料微圆板中的热弹性阻尼

基于经典弹性薄板理论和单向耦合热传导理论,研究了材料性质沿厚度连续变化的功能梯度微圆板的热弹性阻尼特性．首先,考虑热力耦合效应,建立了功能梯度微圆板轴对称横向自由振动微分方程．然后,忽略温度梯度在面内的变化,建立了单向耦合变系数一维热传导方程．采用分层均匀化近似方法,将变系数热传导方程转化为一系列常系数的微分方程,利用上下表面的热边界条件和层间连续性条件获得了微圆板温度场解析解．将所得温度场代入微圆板的自由振动微分方程,得到了包含热弹性阻尼的复频率,从而获得了反映热弹性阻尼水平的逆品质因子．最后,针对材料性质沿板厚按幂函数变化的陶瓷-金属功能梯度微圆板,定量地分析材料梯度指数、几何尺寸、边界条件、温度环境等对微圆板热弹性阻尼的影响．     

功能梯度材料明德林矩形微板的热弹性阻尼

功能梯度材料微板谐振器热弹性阻尼的建模和预测是此类新型谐振器热?弹耦合振动响应的新课题. 本文采用数学分析方法研究了四边简支功能梯度材料中厚度矩形微板的热弹性阻尼. 基于明德林中厚板理论和单向耦合热传导理论建立了材料性质沿着厚度连续变化的功能梯度微板热弹性自由振动控制微分方程. 在上下表面绝热边界条件下采用分层均匀化方法求解变系数热传导方程, 获得了用变形几何量表示的变温场的解析解. 从而将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的偏微分方程. 然后,利用特征值问题在数学上的相似性,求得了四边简支条件下功能梯度材料明德林矩形微板的复频率解析解, 进而利用复频率法获得了反映谐振器热弹性阻尼水平的逆品质因子. 最后, 给出了材料性质沿板厚按幂函数变化的陶瓷?金属组分功能梯度矩形微板的热弹性阻尼数值结果. 定量地分析了横向剪切变形、材料梯度变化以及几何参数对热弹性阻尼的影响规律. 结果表明, 采用明德林板理论预测的热弹性阻尼值小于基尔霍夫板理论的预测结果, 而且两者的差别随着相对厚度的增大而变得显著.      

Mindlin 矩形微板的热弹性阻尼解析解

首次给出了四边简支的 Mindlin 矩形微板热弹性阻尼的解析解. 基于考虑一阶剪切变形的 Mindlin 板理论和单向耦合热传导理论建立了微板热弹性耦合自由振动控制微分方程. 忽略温度梯度在面内的变化,在上下表面绝热边界条件下求得了用变形几何量表示的温度场的解析解. 进一步将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的四阶偏微分方程. 利用特征值问题之间在数学上的相似性,在四边简支条件下给出了用无阻尼 Kirchhoff 微板的固有频率表示的 Mindlin 矩形微板的复频率解析解,从而利用复频率法求得了反映热弹性阻尼水平的逆品质因子. 最后,通过数值结果定量地分析了剪切变形、材料以及几何参数对热弹性阻尼的影响 规律. 结果表明,Mindlin 板理论预测的热弹性阻尼小于 Kirchhoff 板理论预测的热弹性阻尼. 两种理论预测的热弹性阻尼之间的差值在临界厚度附近十分显著. 另外,随着微板的边/厚比增大,Mindlin 微板的热弹性阻尼最大值单调增大,而 Kirchhoff 微板的热弹性阻尼最大值却保持不变.      

ANLYTICAL SOLUTION OF THERMOELASTIC DAMPING IN RECTANGULAR MINDLIN MICRO PLATES 1)

首次给出了四边简支的 Mindlin 矩形微板热弹性阻尼的解析解. 基于考虑一阶剪切变形的 Mindlin 板理论和单向耦合热传导理论建立了微板热弹性耦合自由振动控制微分方程. 忽略温度梯度在面内的变化,在上下表面绝热边界条件下求得了用变形几何量表示的温度场的解析解. 进一步将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的四阶偏微分方程. 利用特征值问题之间在数学上的相似性,在四边简支条件下给出了用无阻尼 Kirchhoff 微板的固有频率表示的 Mindlin 矩形微板的复频率解析解,从而利用复频率法求得了反映热弹性阻尼水平的逆品质因子. 最后,通过数值结果定量地分析了剪切变形、材料以及几何参数对热弹性阻尼的影响 规律. 结果表明,Mindlin 板理论预测的热弹性阻尼小于 Kirchhoff 板理论预测的热弹性阻尼. 两种理论预测的热弹性阻尼之间的差值在临界厚度附近十分显著. 另外,随着微板的边/厚比增大,Mindlin 微板的热弹性阻尼最大值单调增大,而 Kirchhoff 微板的热弹性阻尼最大值却保持不变.     

机械荷载与热荷载共同作用下变厚度梁的热弹性力学解

本文研究了两端简支变厚度梁受机械荷载与热荷载共同作用下的热弹性力学解.温度场用调和级数展开,通过求解热传导方程可首先确定温度沿梁厚度方向的非线性分布情况.从二维热弹性力学理论的基本方程出发,导出满足控制微分方程和两端简支边界条件的位移函数的一般解,对上下表面的边界方程作傅立叶正弦级数展开确定待定系数,数值结果与商业有限元软件ANSYS进行了比较,显示出很高的精度.本文方法可直接应用于对应力和位移分析要求较高的工程问题,如航空航天和微型机械的设计.     

光热激励下功能梯度梁在流体中的振动

通过建立流体中功能梯度梁的光热振动模型,研究了在激光光热驱动下功能梯度梁在不同流体中的振动特性。将功能梯度材料的参数等效化处理得到了简化的热传导方程和振动控制方程,并求解得到了不同边界条件下功能梯度梁的温度场、光热驱动力和振动变形场的解析表达式。数值计算表明:对于本文选取的金和硅组成的功能梯度材料,梁的共振频率随梯度因子的增大而减小;梁在不同流体环境中振动时,共振频率会向低频漂移;梁的尺寸以及梯度因子会影响漂移程度,边界条件的影响较小;当梁的厚度减小时,频率漂移比增大,品质因子减小。     

功能梯度板条的热弹性力学解

本文利用推广后的Mian 和Spencer 功能梯度板理论,研究了功能梯度板条在非均布温度场作用下的热弹性问题．采用该理论中的位移展开公式,在板厚度方向上考虑热传导引起的稳态温度场,材料常数沿板厚方向可以任意连续变化,从而得到了基于弹性理论的功能梯度板条在温度场作用下的解析解．通过数值算例分析,验证了本文理论的正确性并讨论了边界条件和梯度变化程度对功能梯度板条热弹性响应的影响．     

热载荷作用下梯度多孔材料梁弯曲及过屈曲力学行为的研究

基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为．假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解．利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响．结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加．非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大．     

石墨烯增强功能梯度材料板条的热弹性响应

研究了石墨烯增强功能梯度复合材料板条的热弹性问题。基于推广后的Mian和Spencer功能梯度板理论,在板厚度方向上考虑热传导引起的稳态温度场,沿板厚方向考虑了三种石墨烯纳米片的分布形式,最终给出了不同边界条件下石墨烯增强功能梯度板条在温度场作用下的解析解。通过算例分析验证了本文方法的有效性,并讨论了边界条件和石墨烯的分布形式等因素对板条热弹性响应的影响。计算结果表明:石墨烯增强功能梯度材料板条在温度场作用下的热响应与在机械力作用下的弹性响应有较大不同。     

非均匀随从力作用下热弹耦合圆环板的动力特性分析

基于弹性小挠度薄板理论和考虑变形的热传导方程,采用达朗贝尔原理建立了非均匀切向随从力作用下的轴对称圆环板热弹耦合运动方程。采用微分求积法推导了特征方程,得到内边简支(固支)外边自由边界条件下前三阶量纲为一复频率的实部和虚部随随从力的变化曲线;分析了随从力变化系数、热弹耦合系数、内外半径比对圆环板横向振动复频率和稳定性的影响。数值计算结果表明:在其它参数一定的情况下,圆环板发生第1阶和第2阶耦合颤振失稳;相应的颤振失稳临界载荷随着热弹耦合系数和内外半径比的增大而增大,但随着随从力变化系数的增大而减小。     

CLASSICAL AND HOMOGENIZED EXPRESSIONS FOR BUCKLING SOLUTIONS OF FUNCTIONALLY GRADED MATERIAL LEVINSON BEAMS

The relationship between the critical buckling loads of functionally graded material(FGM) Levinson beams(LBs) and those of the corresponding homogeneous Euler-Bernoulli beams(HEBBs) is investigated. Properties of the beam are assumed to vary continuously in the depth direction. The governing equations of the FGM beam are derived based on the Levinson beam theory, in which a quadratic variation of the transverse shear strain through the depth is included.By eliminating the axial displacement as well as the rotational angle in the governing equations,an ordinary differential equation in terms of the deflection of the FGM LBs is derived, the form of which is the same as that of HEBBs except for the definition of the load parameter. By solving the eigenvalue problem of ordinary differential equations under different boundary conditions clamped(C), simply-supported(S), roller(R) and free(F) edges combined, a uniform analytical formulation of buckling loads of FGM LBs with S-S, C-C, C-F, C-R and S-R edges is presented for those of HEBBs with the same boundary conditions. For the C-S beam the above-mentioned equation does not hold. Instead, a transcendental equation is derived to find the critical buckling load for the FGM LB which is similar to that for HEBB with the same ends. The significance of this work lies in that the solution of the critical buckling load of a FGM LB can be reduced to that of the HEBB and calculation of three constants whose values only depend upon the throughthe-depth gradient of the material properties and the geometry of the beam. So, a homogeneous and classical expression for the buckling solution of FGM LBs is accomplished.     

考虑前屈曲耦合变形时功能梯度简支梁的稳定性分析

在某些边界条件下,功能梯度材料（FGM）梁会由于拉弯耦合产生前屈曲耦合变形,而该变形对FGM梁的稳定性有影响。本文假设FGM梁的材料性质只沿厚度方向进行变化,基于经典非线性梁理论和物理中面概念,推导出FGM梁的平衡方程以及包含前屈曲耦合变形影响的屈曲控制方程,并用打靶法进行数值求解。讨论了前屈曲耦合变形、梯度指数以及材料性质的温度依赖等因素对FGM梁非线性变形和稳定性的影响。     

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Thermoelastic contact instability of a functionally graded layer and a homogeneous half-plane

The conductive heat transfer between two elastic bodies in the static contact can cause the system to be unstable due to the interaction between the thermoelastic distortion and pressure-dependent thermal contact resistance. This paper investigates the thermoelastic contact instability of a functionally graded material (FGM) layer and a homogeneous half-plane using the perturbation method. The FGM layer and half-plane are exposed to a uniform heat flux and are pressed together by a uniform pressure. The material properties of the FGM layer vary exponentially along the thickness direction. The characteristic equation governing the thermoelastic stability behavior is obtained to determine the stability boundary. The effects of the gradient index, layer thickness and material combination on the critical heat flux are discussed in detail through a parametric study. Results indicate that the thermoelastic stability behavior can be modified by adjusting the gradient index of the FGM layer.     

THERMAL POST-BUCKLING OF FUNCTIONALLY GRADED MATERIAL TIMOSHENKO BEAMS

Analysis of thermal post-buckling of FGM (Functionally Graded Material) Timoshenko beams subjected to transversely non-uniform temperature rise is presented. By accurately considering the axial extension and transverse shear deformation in the sense of theory of Timoshenko beam, geometrical nonlinear governing equations including seven basic unknown functions for functionally graded beams subjected to mechanical and thermal loads were formulated. In the analysis, it was assumed that the material properties of the beam vary continuously as a power function of the thickness coordinate. By using a shooting method, the obtained nonlinear boundary value problem was numerically solved and thermal buckling and post-buckling response of transversely non-uniformly heated FGM Timoshenko beams with fixed-fixed edges were obtained. Characteristic curves of the buckling deformation of the beam varying with thermal load and the power law index are plotted. The effects of material gradient property on the buckling deformation and critical temperature of beam were discussed in details. The results show that there exists the tension-bend coupling deformation in the uniformly heated beam because of the transversely non-uniform characteristic of materials.     

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material (FGM) beams is studied based on the Levinson beam theory (LBT). Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.     

弹性地基上转动FGM梁自由振动的DTM分析

基于Euler-Bernoulli梁理论,利用广义Hamilton原理推导得到弹性地基上转动功能梯度材料(FGM)梁横向自由振动的运动控制微分方程并进行无量纲化,采用微分变换法(DTM)对无量纲控制微分方程及其边界条件进行变换,计算了弹性地基上转动FGM梁在夹紧-夹紧、夹紧-简支和夹紧-自由三种边界条件下横向自由振动的无量纲固有频率,再将控制微分方程退化到无转动和地基时的FGM梁,计算其不同梯度指数时第一阶无量纲固有频率值,并和已有文献的FEM和Lagrange乘子法计算结果进行比较,数值完全吻合。计算结果表明,三种边界条件下FGM梁的无量纲固有频率随无量纲转速和无量纲弹性地基模量的增大而增大;在一定无量纲转速和无量纲弹性地基模量下,FGM梁的无量纲固有频率随着FGM梯度指数的增大而减小;但在夹紧-简支和夹紧-自由边界条件下,一阶无量纲固有频率几乎不变。     

功能梯度梁与均匀梁静动态解间的相似转换

基于Euler-Bernoulli 梁理论, 研究了功能梯度材料梁的弯曲、屈曲和自由振动. 通过分析和比较功能梯度材料梁 和均匀梁的控制方程, 得到了功能梯度材料梁与均匀梁的解之间的相似转换关系. 在给定功 能梯度材料梁的材料性质在横向按幂函数分布的情况下, 导出了解之间的相似转换系数的解 析表达式. 该系数集中反映了功能梯度梁的材料非均匀性. 因此, 可将功能梯度材料梁的静 动态问题的求解转换为同样载荷和边界条件下均匀梁的静动态问题求解以及相似转换系数的 计算.