热荷载作用下Timoshenko功能梯度夹层梁的静态响应

在精确考虑轴线伸长和一阶横向剪切变形的基础上建立了Timoshenko功能梯度夹层梁在热载荷作用下的几何非线性控制方程.采用打靶法数值求解所得强非线性边值问题,获得了两端固支功能梯度夹层梁在横向非均匀升温作用下的静态热过屈曲和热弯曲变形数值解.分析了功能梯度材料参数变化、不同表层厚度和升温参数对夹层梁弯曲变形、拉-弯耦...     

轴向随动分布载荷作用下FGMs Timoshenko梁的后屈曲特性

研究了Timoshenko功能梯度材料梁在随动分布载荷作用下的后屈曲问题。在考虑轴线伸长和一阶横向剪切变形基础上,建立了在轴向分布随动载荷作用下一端简支一端固定Timoshenko功能梯度梁的过屈曲控制方程。其中假设功能梯度材料性质只沿厚度方向变化,并以成分含量的幂指数函数形式变化。采用打靶法求解了所得线性常微分两点边值问题,获得了随动载荷作用下Timoshenko功能梯度梁的过屈曲平衡路径和平衡构形。对比了Timoshenko梁和Euler梁的后屈曲行为,并分析了材料的体积分数指数和长细比对梁屈曲行为的影响。结果表明:考虑剪切变形的Timoshenko梁的后屈曲行为与Euler梁的后屈曲行为明显不同;体积分数指数一定时,随着长细比的增加,梁的临界载荷减小;长细比一定时,随着体积分数指数的增加,梁的临界载荷也减小。     

梯度多孔材料梁的非线性力学行为

基于经典梁理论以及物理中面概念,研究了机械载荷作用下梯度多孔材料梁的非线性弯曲及过屈曲问题。利用能量法导出了梯度多孔材料梁的基本方程,并用打靶法对其进行数值求解。假设梯度多孔材料性质只沿厚度方向变化,利用数值结果研究了两种不同材料模型下梯度多孔材料性质、外载荷、边界条件等因素对梯度多孔材料梁非线性弯曲及过屈曲行为的影响。数值结果表明:随着孔隙率的增大,梯度多孔材料梁的弯曲挠度增大,而且非对称材料模型下的结果高于对称材料模型下的结果;梯度多孔材料梁的临界屈曲载荷随孔隙率的增大而减小,而非对称材料模型下的结果低于对称材料模型下的结果。     

基于物理中面FGM简支梁的弯曲行为

基于一阶非线性梁理论,利用物理中面概念导出了FGM梁的基本方程,分析了热载荷作用下简支FGM梁的弯曲行为.当坐标面置于功能梯度材料(FGM)梁的物理中面上时,其本构方程中,面内力与弯矩并不耦合,使得问题的控制方程以及边界条件得以简化.分析中假设功能梯度材料性质只沿梁厚度方向、并按成分含量的幂指数形式变化;利用打靶法数值地求解了所得方程.数值结果表明:热载荷作用下,夹紧FGM梁发生过屈曲变形,而简支梁则发生较为复杂的热弯曲变形;在同一热载荷作用下,简支FGM梁将会产生三种构形问题;剪切变形对夹紧FGM梁的热变形影响比简支梁更明显.     

粘贴压电层功能梯度材料Timoshenko梁的热过屈曲分析

研究了上下表面粘贴压电层的功能梯度材料Timoshenko梁在升温及电场作用下的过屈曲行为。在精确考虑轴线伸长和一阶横向剪切变形的基础上,建立了压电功能梯度Timoshenko层合梁在热-电-机械载荷作用下的几何非线性控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。采用打靶法数值求解所得强非线性边值问题,获得了在均匀电场和横向非均匀升温场内两端固定Timoshenko梁的静态非线性屈曲和过屈曲数值解。并给出了梁的变形随热、电载荷及材料梯度参数变化的特性曲线。结果表明,通过施加电压在压电层产生拉应力可以有效地提高梁的热屈曲临界载荷,延缓热过屈曲发生。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,也会产生拉-弯耦合效应。但是对于两端固定的压电-功能梯度材料梁,在横向非均匀升温下过屈曲变形仍然是分叉形的。     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

热载荷作用下梯度多孔材料梁弯曲及过屈曲力学行为的研究

基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为．假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解．利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响．结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加．非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大．     

剪切可变形梁非线性静态响应的精确解

本文给出了纵横向载荷作用下,梁非线性静态问题的精确解。基于非线性一阶剪切变形梁理论,导出了梁非线性静态问题的基本方程。将三个非线性方程化简为一个关于横向挠度的非齐次四阶非线性积分-微分方程,当只有轴向载荷作用时,该方程和相应的边界条件构成微分特征值问题。直接求解该方程,得到了梁非线性静态变形闭合形式的解,这个解显式地给出了梁的变形与外载荷之间的非线性关系,描述了梁变形后的非线性平衡路径。利用这个解,得到了梁临界屈曲载荷的一阶结果与经典结果。为考察载荷、长高比以及边界条件的影响,根据得到的解析解给出了一些数值算例,并讨论了梁不同阶屈曲模态下非线性静态响应的一些性质。结果表明:对应于方程特征参数λ的不同取值区间,梁的轴向载荷-挠度曲线有不同的解支;而对应于参数λ的同一取值区间,梁分别对应两个不同的屈曲模态。     

考虑横向拉伸影响的FGM板的静态分析

在三阶剪切变形理论的基础上,添加关于厚度坐标z的幂函数项,并假设板结构的上下表面剪切力为0,提出了一种考虑横向拉伸影响的高阶剪切变形理论。并且研究了简支边界条件下受静态载荷作用的功能梯度材料矩形板的静态弯曲行为。基于虚功原理推导出了功能梯度矩形板的基本方程,利用Navier双三角级数法计算了功能梯度材料矩形板在静态载荷作用下沿厚度方向的位移及应力分布的数值结果。计算结果与三维精确解理论、其他高阶剪切变形理论得到的数值结果进行了比较。对比结果表明,改进的考虑横向拉伸影响的高阶剪切变形理论的正确性和优越性。     

功能梯度材料扁锥壳的热弹性大变形分析

研究了功能梯度材料扁薄锥壳在横向非均匀升温场中的几何非线性大变形问题.基于von Kármán几何非线性理论推导出了以中面位移为基本未知量的功能梯度扁薄锥壳在横向非均匀热载荷作用下的轴对称大挠度控制方程.采用打靶法数值求解所得非线性常微分方程边值问题,得到了锥壳的大挠度弯曲变形数值解.给出了锥壳的变形与其形状参数、载荷和材料参数等变化的特征关系曲线,分析和讨论了温度参数和材料梯度变化参数对变形的影响.     

Homogenized and classical expressions for static bending solutions for functionally graded material Levinson beams

The exact relationship between the bending solutions of functionally graded material (FGM) beams based on the Levinson beam theory and those of the corresponding homogenous beams based on the classical beam theory is presented for the material properties of the FGM beams changing continuously in the thickness direction. The deflection, the rotational angle, the bending moment, and the shear force of FGM Levinson beams (FGMLBs) are given analytically in terms of the deflection of the reference homogenous Euler-Bernoulli beams (HEBBs) with the same loading, geometry, and end supports. Consequently, the solution of the bending of non-homogenous Levinson beams can be simplified to the calculation of transition coefficients, which can be easily determined by variation of the gradient of material properties and the geometry of beams. This is because the classical beam theory solutions of homogenous beams can be easily determined or are available in the textbook of material strength under a variety of boundary conditions. As examples, for different end constraints, particular solutions are given for the FGMLBs under specified loadings to illustrate validity of this approach. These analytical solutions can be used as benchmarks to check numerical results in the investigation of static bending of FGM beams based on higher-order shear deformation theories.     

Bending and free vibrational analysis of bi-directional functionally graded beams with circular cross-section

The bending and free vibrational behaviors of functionally graded (FG) cylindrical beams with radially and axially varying material inhomogeneities are investigated. Based on a high-order cylindrical beam model, where the shear deformation and rotary inertia are both considered, the two coupled governing differential motion equations for the deflection and rotation are established. The analytical bending solutions for various boundary conditions are derived. In the vibrational analysis of FG cylindrical beams, the two governing equations are firstly changed to a single equation by means of an auxiliary function, and then the vibration mode is expanded into shifted Chebyshev polynomials. Numerical examples are given to investigate the effects of the material gradient indices on the deflections, the stress distributions, and the eigenfrequencies of the cylindrical beams, respectively. By comparing the obtained numerical results with those obtained by the three-dimensional (3D) elasticity theory and the Timoshenko beam theory, the effectiveness of the present approach is verified.     

功能梯度与均匀圆板弯曲解的线性转换关系

基于一阶剪切理论, 研究了功能梯度材料圆板与均匀圆板轴对称弯曲解之间的线性转换关系. 通过理论分析和比较 功能梯度材料圆板和均匀圆板在一阶剪切理论下的位移形式的轴对称弯曲控制方程, 发现了功能梯度材料圆板的转角与均匀圆板的转角之间的相似转换关系. 在假设材料性质沿板厚连续变化的情况下, 给出了相似转换系数的解析表达式. 在此基础上, 进一步导出了一阶剪切理论下功能梯度圆板的挠度与经典理论下, 均匀圆板的挠度之间的线性关系. 从而, 可将功能梯度材料圆板在一阶剪切理论下的弯曲问题求解, 转化为相应均匀薄圆板在经典理论下的弯曲问题求解, 以及转换系数的计算问题. 这一方法为功能梯度非均匀中厚度圆板的求解提供了简捷途径, 而且更便于工程应用. 作为例子, 采用上述方法分别求得了周边简支和夹紧条件下, 梯度圆板在均布横向载荷作用下的弯曲解析解, 该解答与Reddy得到的结果完全吻合.      

Analysis of curved beams using a new differential transformation based curved beam element

Differential transformation method is used to obtain the shape functions for nodal variables of an arbitrarily non-uniform curved beam element including the effects of shear deformation considering axially functionally graded material. The proposed shape functions depend on the variations in cross-sectional area, moment of inertia, curvature and material properties along the axis of the curved beam element. The static and free vibration of axially functionally graded tapered curved beams including shear deformation and rotary inertia are studied through solving several examples. Numerical results are presented for circular, parabolic, catenary, elliptic and sinusoidal beams (both forms—prime and quadratic) with hinged-hinged, hinged-clamped and clamped-clamped and clamped-free end restraints. Three general taper types (depth taper, breadth taper and square taper) for rectangular cross section are studied. Out of plane vibration is studied and the lowest natural frequencies are calculated and compared with the published results. Out of plane buckling is investigated for circular beams due to radial load.     

非保守功能梯度弹性组合曲梁的精确模型及其数值解

基于直法线假设,采用可伸长梁的几何非线性理论,建立了功能梯度材料弹性组合曲梁受切线均布随从力作用下的静态大变形数学模型。该模型不仅计及了轴线伸长,同时也精确地考虑了梁的初始曲率对变形的影响以及轴向变形与弯曲变形之间的耦合效应。用打靶法数值求解了由金属和陶瓷两相材料所构成的一种FGM组合曲梁在沿轴线均布切向随动载荷作用下的非线性平面弯曲问题,给出了不同梯度指标下FGM弹性曲梁随载荷参数大范围变化的平衡路径,并与金属和陶瓷两种单相材料曲梁的相应特性进行了比较。     

A higher-order theory for static and dynamic analyses of functionally graded beams

The higher-order theory is extended to functionally graded beams (FGBs) with continuously varying material properties. For FGBs with shear deformation taken into account, a single governing equation for an auxiliary function F is derived from the basic equations of elasticity. It can be used to deal with forced and free vibrations as well as static behaviors of FGBs. A general solution is constructed, and all physical quantities including transverse deflection, longitudinal warping, bending moment, shear force, and internal stresses can be represented in terms of the derivatives of F. The static solution can be determined for different end conditions. Explicit expressions for cantilever, simply supported, and clamped-clamped FGBs for typical loading cases are given. A comparison of the present static solution with existing elasticity solutions indicates that the method is simple and efficient. Moreover, the gradient variation of Young’s modulus and Poisson’s ratio may be arbitrary functions of the thickness direction. Functionally graded Rayleigh and Euler–Bernoulli beams are two special cases when the shear modulus is sufficiently high. Moreover, the classical Levinson beam theory is recovered from the present theory when the material constants are unchanged. Numerical computations are performed for a functionally graded cantilever beam with a gradient index obeying power law and the results are displayed graphically to show the effects of the gradient index on the deflection and stress distribution, indicating that both stresses and deflection are sensitive to the gradient variation of material properties.     

Semi-analytical elasticity solutions for bi-directional functionally graded beams

Elasticity solutions are presented for bending and thermal deformations of functionally graded beams with various end conditions, using the state space-based differential quadrature method. The beams are assumed to be macroscopically isotropic, with Young’s modulus varying exponentially along the thickness and longitudinal directions, while Poisson’s ratio remaining constant. The state space method is adopted to obtain analytically the thickness variation of the elastic field and, when coupled with differential quadrature, the longitudinal discretization can be analyzed in an approximate manner. This approach is then validated by comparing the numerical results with the exact solutions for a special functionally graded beam and with finite element solutions. The influences of material gradient indices on the response of bi-directional functionally graded beams are finally investigated.     

功能梯度变曲率曲梁的几何非线性模型及其数值解

基于弹性曲梁平面问题的精确几何非线性理论,建立了功能梯度变曲率曲梁在机械和热载荷共同作用下的无量纲控制方程和边界条件,其中基本未知量均被表示为变形前的轴线坐标的函数。以椭圆弧曲梁为例,采用打靶法求解非线性常微分方程的两点边值问题,获得了两端固定功能梯度椭圆弧曲梁在横向非均匀升温下的热弯曲变形数值解,分析了材料梯度指数、温度参数、结构几何参数等对曲梁受力及变形的影响。     

Initial value method for free vibration of axially loaded functionally graded Timoshenko beams with nonuniform cross section

Free vibration of nonuniform axially functionally graded Timoshenko beams subjected to combined axially tensile or compressive loading is studied. An emphasis is placed on the effect of tip and distributed axial loads on the natural frequencies and mode shapes for an inhomogeneous cantilever beam including material inhomogeneity and geometric non-uniform cross section. The initial value method is developed to determine the natural frequencies. The method’s effectiveness is verified by comparing our results with previous ones for special cases. Natural frequencies of standing/hanging Timoshenko beams are calculated for four different cross sections. The influences of shear rigidity, taper ratio, gradient index, tip force, and axially distributed loading on the natural frequencies of clamped-free beams are discussed. Material inhomogeneity and geometric non-uniform cross-section strongly affect higher-order vibration frequencies and mode shapes.