随机桁架结构的非平稳随机动力响应分析

本文研究了随机桁架结构在非平稳随机激励下的动力响应问题。在利用随机因子法分析随机结构动力特性的基础上，给出了一种分析随机结构非平稳随机响应的新方法。从结构非平稳随机响应的表达式出发，同时考虑桁架结构的物理参数、几何尺寸的随机性，利用求解随机变量函数矩的方法和求解随机变量数字特征的代数综合法，导出了随机桁架结构在非平稳随机激励下位移响应均方值和应力响应均方值的均值、方差和变异系数的计算表达式。通过算例，分析了结构物理参数和几何尺寸的随机性对结构位移响应均方值和应力响应均方值随机变量随机性的影响。本文方法具有对随机结构进行一次动力分析便可求得动力响应的数字特征，且可以考察结构任一参数的随机性对结构非平稳随机响应分析结果的影响之优点。     

结构非平稳随机响应分析的快速虚拟激励法

虚拟激励法能够方便地应用于结构非平稳随机响应分析,但在每个离散频点处都涉及到虚拟激励作用下动力方程的时程积分,对于大型复杂结构,其计算量是难以接受的。将结构动力方程写成状态方程形式,采用精细积分法对状态方程进行数值求解,导出了结构动力响应关于离散时刻处激励的显式线性表达式。利用这一显式表达式,只需要变换离散时刻处的激励数值,就可以方便快捷地求出新的激励作用下的结构动力响应。效率分析和数值算例表明,相对于传统虚拟激励法,本文提出的改进算法在求解非平稳激励下结构随机振动方面具有更高的计算效率。     

非平稳随机激励下结构体系动力可靠度时域解法

将结构动力方程写成状态方程形式,采用精细积分法对其进行数值求解,导出了非平稳激励下结构随机响应的时域显式表达式,该过程的计算量仅相当于两次确定性时程分析的计算量. 基于该显式表达式,结合首次超越失效准则,提出了非平稳随机激励下结构体系动力可靠度的数值模拟算法. 与功率谱方法相比,该方法无需同时在时频域内进行大量数值积分,也无需引入关于响应过程跨越界限次数概率分布, 以及各失效模式相关性等方面的假定. 通过数值算例, 对比了该方法与泊松过程法、马尔可夫过程法、传统蒙特卡罗法的计算精度和计算效率,结果显示该方法具有理想的精度和相当高的效率.      

Thermal stresses in an isotropic trimaterial interacted with a pair of point heat source and heat sink

A general analytical solution for an isotropic trimaterial interacted with a point heat source is provided in this paper. Based on the method of analytical continuation in conjunction with the alternating technique, the solutions to heat conduction and thermoelasticity problems for three dissimilar media are first derived. A rapidly convergent series solution for both the temperature and stress functions, which is expressed in terms of an explicit general term of the complex potential of the corresponding homogeneous problem, is obtained in an elegant form. As a numerical illustration, the distributions of thermal stresses along the interface are presented for various material combinations and for different positions of the applied heat source and heat sink.     

Thermal response of a partially insulated interface crack in a graded coating-substrate structure under thermo-mechanical disturbance: Energy release and density

Consider the thermal fracture problem of a functionally graded coating-substrate structure of finite thickness with a partially insulated interface crack subjected to thermal-mechanical supply. A new model is proposed that the heat conduction through the crack region occurs and the temperature drop across the crack surfaces is the result of the thermal resistance. For the first time, real fundamental solutions are derived for the fracture analysis of functionally graded materials. The complicated mixed boundary problems of equations of heat conduction and elasticity are converted analytically into singular integral equations, which are solved numerically. The asymptotic expressions with higher order terms for the singular integral kernels are considered to improve the accuracy and efficiency of the numerical integration. Explicit expressions of various failure modes including stress intensity factors, energy release rate and strain energy density, are provided. Numerical results are presented to illustrate the effects of non-homogeneity parameters and the dimensionless thermal resistance on the temperature distribution along the crack surfaces and extended crack line, the thermal stress intensity factors and minimum strain energy density.     

大体积混凝土结构随机温度徐变应力计算方法研究

首次尝试将随机有限元法引入大体积混凝土结构随机温度徐变应力的计算．综合考虑各种随机因素，对于由材料物理参数随机性引起的随机温度场的影响，本文给出了相应于初应变隐式解法的随机有限元计算方法；对于周期平稳随机温度场对徐变应力场的影响，本文提出了复模量隐式解法，并首次视复频响应函数为材料参数的随机函数，给出了相应的复频响应－随机有限元列式；而对于一般非平稳绝热温升温度场的影响，本文提出了参数调幅逐段简化的方法．本文方法有效地克服了前人不能考虑材料参数随机性或需弹模不随时间变化的局限性     

粘滞阻尼器减震结构非线性随机振动的时域显式降维迭代随机模拟法

粘滞阻尼器在大型复杂结构减震设计中应用广泛。由于粘滞阻尼器的非线性阻尼力特性,粘滞阻尼器减震结构非平稳随机地震反应分析是一个典型的局部非线性随机振动问题。利用减震结构动力响应时域显式表达式的降维列式优势,仅针对与粘滞阻尼器相关的局部自由度进行非线性迭代计算,提出了局部非线性随机振动问题的时域显式降维迭代随机模拟法,为设置粘滞阻尼器的大型复杂减震结构非线性地震反应分析提供一种高效的随机振动方法。以安装了四个纵桥向粘滞阻尼器的某主跨1200m悬索桥为工程实例,开展E2水准地震激励下的非线性随机振动分析。计算结果显示,设置阻尼器后,主梁的纵桥向位移得到明显控制,降幅达到80%,大桥的关键截面内力也有5%左右的降幅。     

Cavity detection in a heat conductor using linear sampling method

In this paper, solution of inverse problems in heat conduction transient fields is investigated. For this purpose, a new time-domain version of linear sampling method (TDLSM) is developed for cavity detection in a heat conductor. The linear sampling method (LSM) is an effective approach to image the geometrical features of unknown targets. Although this method has been used in the context of inverse scattering problems such as solid, acoustics, and electromagnetism, there is no specific attempt to apply this method to identification of cavities in heat conductors. This study emphasizes the implementation of the LSM in the time-domain fields using finite element method. A set of numerical simulations on two-dimensional transient heat conduction problems is presented to highlight many effective features of the proposed TDLSM fast qualitative identification method.     

????-FGM-???EFBF?????????????

为研究金属-FGM-陶瓷 EFBF 复合板的稳态热应力,从热传导规律出发,结合热应力计算公式,建立了该复合板稳态热应 力的研究模型,用有限元和辛普生法分析了T_a=500K和T_b=1800K时,该 复合板的稳态热应力分布并与无梯度两层复合板的结果进行了比较. 结果表明：FGM梯度层的厚度、组分和孔隙率对该EFBF复合板的热应力有不同程度的影响, 此外,有梯度三层复合板的热应力比较缓和,最大拉应力减小29.18%. 此结果为该复合板的设计和应用提供了准确的计算依据.     

Thermally induced vibration and stability of laminated composite plates with temperature-dependent properties

This paper presents a study on the buckling and vibration of initially stressed composite plates with temperature-dependent material properties in thermal environments. The initial stress is taken to be a combination of a pure bending stress and an axial stress. The temperature distribution in the plate is assumed to be uniform and linear in the transverse direction. The governing equations including the transverse shear deformation effects are established using the variational method. The effects of various parameters on the buckling and vibration behaviors of laminated plates with respective temperature-dependent and temperature-independent material properties are investigated. The buckling load and natural frequency are sensitive to the thermal stresses and initial stresses. Numerical results reveal that temperature-dependent material properties should be considered in the buckling and vibration analysis for laminated plates under thermal conditions.     

十次对称二维准晶中的热应力分析

推导了当考虑热效应时十次对称二维准晶体平面应变问题的通解表示．作为应用，采用所获得的通解首先得到了十次对称二维准晶体中的一个点热源所引起的声子场和相位子场，给出了点热源所引起的声子场和相位子场应力分量的解析表达式；接着获得了在均匀热流作用下十次对称二维准晶体中-绝缘椭圆孔洞所引起的热应力问题的弹性解答，给出了沿椭圆边界环向应力分布的解析表达式；当椭圆的短轴趋于零时，则获得了裂纹问题的解答，给出了应力强度因子、裂纹表面张开位移及能量释放率的解析表达式；推导了在任意热载荷作用下裂尖附近的渐近场．     

Size-dependent thermoelasticity of a finite bi-layered nanoscale plate based on nonlocal dual-phase-lag heat conduction and Eringen's nonlocal elasticity

The size effects on heat conduction and elastic deformation are becoming significant along with the miniaturization of the device and wide application of ultrafast lasers.In this work,to better describe the transient responses of nanostructures,a size-dependent thermoelastic model is established based on nonlocal dual-phase-lag(N-DPL)heat conduction and Eringen's nonlocal elasticity,which is applied to the one-dimensional analysis of a finite bi-layered nanoscale plate under a sudden thermal shock.In the numerical part,a semi-analytical solution is obtained by using the Laplace transform method,upon which the effects of size-dependent characteristic lengths and material properties of each layer on the transient responses are discussed systematically.The results show that the introduction of the elastic nonlocal parameter of Medium 1 reduces the displacement and compressive stress,while the thermal nonlocal parameter of Medium 1 increases the deformation and compressive stress.These findings may be beneficial to the design of nano-sized and multi-layered devices.     

THERMAL SHOCK OF SEMI-INFINITE BODY WITH MULTI-PULSED INTENSE LASER RADIATION

In order to investigate the thermal shock and the heat conduction property of a target under multi-pulsed laser radiation, analytic expressions of both temperature and thermal stress fields in the target are deduced on the basis of the non-Fourier conduction law and the thermo-elastic theory. Taking a stainless steel target as an example, we can solve the analytic expressions under appropriate boundary conditions by using the finite difference method and MATLAB software, and then reveal the evolution law of both surplus temperaturt, and thermal stress in the target. The results indicate that the temperature curves in the target irradiated by a multi-pulsed laser take on a delayed character in different sections away from the boundary, which is only affected by its relaxation time. The front of the stress wave is very steep in the non-Fourier numerical solutions, which presents an obvious thermal shock, so it is necessary to consider the non-Fourier effect of semi-infinite body under the high energy laser radiation.     

Homogenized equations for steady heat conduction in composite materials with dilutely-distributed impurities

In this paper.by using the two-space method,homogenizedequations for steady heat conduction in the composite ma-terial cylinders with dilutely-distributed elliptic cylin-ders of impurities are derived.and the ezplicit ezpres-sions for the corresponding effective heat conductivity ofthose which are concerned are obtained.It is also shownthat the macroscopic heat conduction is anisotropic whenthe cross-sections of the impurity cylinders are unidirec-tionally oriented and isotropic when the angular distribu-tion of the cross-sections is uniform.     

均布荷载作用下功能梯度简支梁弯曲的解析解

利用应力函数半逆解法,研究了均布载荷作用下、材料属性在厚度上任意变化的功能梯度简支梁弯曲的解析解,给出了各向应力应变与位移的解析显式表达式.首先根据平面应力状态的基本方程,得出了功能梯度梁的应力函数应满足的偏微分方程,并根据应力边界条件得出了各应力分布的表达式;进而根据功能梯度材料的本构方程和位移边界条件,得出了应变和位移的分布.最后,通过将本文的解退化到均质各向同性梁并与经典弹性解比较,证明了本文理论的正确性,并求解了材料组分呈幂律分布的功能梯度梁的应力和位移分布,分析了上下表层材料的弹性模量比λ与组分材料体积分数指数n对应力和位移分布的影响.     

A GENERALIZED THERMOELASTIC DIFFUSION PROBLEM OF THIN PLATE HEATED BY THE ULTRASHORT LASER PULSES 1)

由于超短激光脉冲具有功率密度高、持续时间短、加工精度高等优势, 近年来被广泛应用于超精细加工、光学储存和微电子器件制造等领域. 本文基于L-S型广义热弹扩散理论, 建立了考虑材料记忆依赖效应和空间非局部效应的记忆依赖型非局部广义热弹扩散耦合理论, 它能够准确预测几何尺寸与内部特征尺寸相近结构的热弹扩散瞬态响应. 推导了所建理论的控制方程, 并基于拉普拉斯积分变换获得了控制方程的解. 作为算例, 利用所建理论和求解方法研究了半无限大薄板受非高斯激光脉冲加热和化学冲击联合作用下的热弹扩散瞬态响应问题, 得到了薄板的温度、化学势、位移、应力和浓度等随非局部参数、热时间迟滞因子和扩散时间迟滞因子等参数变化的分布规律. 结果表明: 传热对传质影响显著, 传质对传热影响甚微; 非局部参数对位移、应力影响显著, 对温度、化学势和浓度几乎没有影响. 该理论及求解方法的建立, 旨在实现材料在机械、热、化学势等冲击作用下传热传质瞬态响应的准确预测.     

Transient hyperbolic heat conduction in thick-walled FGM cylinders and spheres with exponentially-varying properties

This paper focuses on non-Fourier hyperbolic heat conduction analysis for heterogeneous hollow cylinders and spheres made of functionally graded material (FGM). All the material properties vary exponentially across the thickness, except for the thermal relaxation parameter which is taken to be constant. The cylinder and sphere are considered to be cylindrically and spherically symmetric, respectively, leading to one-dimensional heat conduction problems. The problems are solved analytically in the Laplace domain, and the results obtained are transformed to the real-time space using the modified Durbin’s numerical inversion method. The transient responses of temperature and heat flux are investigated for different inhomogeneity parameters and relative temperature change values. The comparisons of temperature distribution and heat flux between various time and material properties are presented in the form of graphs.     

超短激光脉冲加热薄板的广义热弹扩散问题

由于超短激光脉冲具有功率密度高、持续时间短、加工精度高等优势, 近年来被广泛应用于超精细加工、光学储存和微电子器件制造等领域. 本文基于L-S型广义热弹扩散理论, 建立了考虑材料记忆依赖效应和空间非局部效应的记忆依赖型非局部广义热弹扩散耦合理论, 它能够准确预测几何尺寸与内部特征尺寸相近结构的热弹扩散瞬态响应. 推导了所建理论的控制方程, 并基于拉普拉斯积分变换获得了控制方程的解. 作为算例, 利用所建理论和求解方法研究了半无限大薄板受非高斯激光脉冲加热和化学冲击联合作用下的热弹扩散瞬态响应问题, 得到了薄板的温度、化学势、位移、应力和浓度等随非局部参数、热时间迟滞因子和扩散时间迟滞因子等参数变化的分布规律. 结果表明: 传热对传质影响显著, 传质对传热影响甚微; 非局部参数对位移、应力影响显著, 对温度、化学势和浓度几乎没有影响. 该理论及求解方法的建立, 旨在实现材料在机械、热、化学势等冲击作用下传热传质瞬态响应的准确预测.      

Time-dependent thermoelastic creep analysis of rotating disk made of Al–SiC composite

Time-dependent creep stress redistribution analysis of rotating disk made of Al–SiC composite is investigated using Mendelson’s method of successive elastic solution. All mechanical and thermal properties except Poisson’s ratio are radial dependent based on volume fraction percent of SiC reinforcement. The material creep behavior is described by Sherby’s constitutive model using Pandey’s experimental results on Al–SiC composite. Loading is an inertia body force due to rotation and a distributed temperature field due to steady-state heat conduction from inner to outer surface of the disk. Using equations of equilibrium, stress strain, and strain displacement, a differential equation, containing creep strains, for displacement is obtained. History of stresses and deformations are calculated using method of successive elastic solution. It is concluded that the uniform distribution of SiC reinforcement does not considerably influence on stresses. However, the minimum and most uniform distribution of circumferential and effective thermoelastic stresses belongs to composite disk of aluminum with 0% SiC at inner surface and 40% SiC at outer surface. It has also been found that the stresses, displacement, and creep strains are changing with time at a decreasing rate so that after almost 50 years the solution approaches the steady-state condition.     

An analytical treatment for combined heat transfer by radiation,convection and conduction within a heat insulating wall structure

An analytical procedure has been proposed to attack a highly conjugate thermal problem associated with radiation, convection and conduction within a heat insulating wall structure. Firstly, an analytical solution is derived for fully-developed mixed convective flow through parallel plates. Secondly, the resulting expressions for convection are coupled with radiation and conduction equations to form a set of heat balance equations for each heat transfer surface. Illustrative calculations are conducted to estimate heat transfer rates through a heat insulating roof structure with an aluminum partition with high reflectivity, subject to solar radiation in summer. The effect of an aluminum partition on the heat insulation is elucidated.