具有裂纹-碰摩耦合故障转子-轴承系统的动力学研究

以非线性动力学和转子动力学理论为基础，分析了带有碰摩和裂纹耦合故障的弹性转子系统的复杂运动，在考虑轴承油膜力的同时构造了含有裂纹和碰摩故障转子系统的动力学模型。针对短轴承油膜力和碰摩-裂纹转子系统的强非线性特点，采用Runge-Kutta法对该系统由碰摩和裂纹耦合故障导致的非线性动力学行为进行了数值仿真研究，发现该类碰摩转子系统在运行过程中存在周期运动、拟周期运动和混沌运动等丰富的非线性现象，该研究结果为转子-轴承系统故障诊断、动态设计和安全运行提供理论参考。     

非稳态非线性油膜力作用下柔性轴裂纹转子的动力特性分析

分析了在动载轴承非稳态非线性油膜力作用下，具有横向裂纹柔性轴Jeffcott转子在非线性涡动影响下的动力特性。通过数值计算表明，在油膜失稳转速前，随着裂纹轴刚度变化比的增大，系统在低转速区域内具有丰富的非线性动力行为，出现倍周期分叉及混沌现象，涡动振幅随转速升高而减小，直到非稳态非线性油膜失稳，在无裂纹转子油膜临界失稳点处发现了类Hopf分叉现象，系统运动由平衡变为拟周期运动；裂纹转子在油膜临界失稳时的系统运动亦为拟周期运动，裂纹转子轴刚度变化对油膜失稳点及油膜失稳之后转子的运动影响不大，转子系统作拟周期运动。     

碰摩裂纹转子轴承系统的周期运动稳定性及实验研究

根据碰摩裂纹耦合故障转子轴承系统的非线性动力学方程，利用求解非线性非自治系统周期解的延拓打靶法，研究了系统周期运动的稳定性。研究发现，小偏心量下系统周期运动发生Hopf分岔，大偏心量下系统周期运动发生倍周期分岔，偏心量的加大使周期解的稳定性明显降低；系统碰摩间隙变小，碰摩影响了油膜涡动的形成，使失稳转速有所提高；裂纹深度的加大降低了系统周期运动的稳定性。本文的研究为转子轴承系统的安全稳定运行提供了理论参考。     

汽轮机转子在气流力和油膜力作用下的非线性动力学特性

为了分析转子在油膜力和气流激振力共同作用下的非线性振动特性，本文以短轴承支撑的不平衡刚性对称Jeffcott转子系统为研究对象，首先分析转子在非稳态油膜力作用下的振动特性，然后分析转子在油膜力和气流激振力共同作用下的非线性振动特性。采用数值模拟的方法研究了系统的分岔和混沌特性，计算结果表明，考虑气流激振力和油膜力共同作用下的转子系统与仅考虑油膜力的转子系统相比，在相对进气速度v=30m／s时，随着无量纲转速ω的增加。二者都出现了周期运动和混沌运动多次交替出现的复杂运动特性，但是前者首次出现倍周期分岔和混沌运动时的转运提前，在定转速情况下，随着v的增大，系统最终在经历周期运动之后进入混沌运动，而且圆盘中心的最大振幅随着v的增大而增大。     

带有两端支座松动故障的转子系统的振动分析

应用现代非线性动力学理论，分析了带有两端支座松动故障的转子-轴承系统的复杂运动现象。模拟结果表明：带有两端支座松动故障的转子-轴承系统运动在未到共振区时以周期运动为主，在过共振区后，运动形式以拟周期和混沌为主，两个松动支座的振动在一定程度上相互抑制。同时，当支座发生松动时，轴颈的轴心轨迹以及支座的Poincare截面图和相轨迹都呈现出特殊的形状，并且这些形状又随松动支座的振幅是否达到最大间隙值而有所不同。上述结论可望为转子-轴承系统的松动故障的研究及故障诊断提供理论参考。     

受电磁激励的连续转子-轴承系统非线性振动与分岔

研究了受横向不平衡电磁激励的转子．轴承系统的非线性振动响应。首先将转子．轴承系统简化为带有质量不平衡并受横向激励的连续梁,由于短轴承的油膜力和电磁力的共同激励,系统振动具有强非线性特性。用Galerkin方法把偏微分控制方程离散为常微分方程组,采用四阶Runge—Kutta法对该系统进行数值仿真研究。其次比较了转轴分别在电磁力、油膜力单独作用和两种力共同作用下的振动特性,研究表明电磁力和油膜力对转子系统的非线性振动和分岔有着不同的贡献：油膜力的存在抑制了拟周期运动的发生,延长了稳定运行区域;电磁力拉长了拟周期发生的区域,降低了转子系统发生突发性破坏的风险。最后给出了系统响应随转速、电磁参数、油膜粘度等控制参数变化的分岔图,表明：系统在两个方向的运动随控制参数的变化趋势基本相同,经历了周期、倍周期、拟周期等非线性运动交替出现的过程;且油膜粘度的增大有利于转子系统的安全运行。     

叶片振动影响下双盘转子-轴承系统的稳定性与分岔

研究叶片与转子-轴承系统的耦合非线性振动,建立了一个带叶片的双盘转子-轴承系统的非线性动力学模型,其中包含一个弹性转轴、两个滑动轴承、两个刚性圆盘和两组弹性叶片.为了分析叶片的惯性影响,将其简化为单摆模型.采用4阶Runge-Kutta法进行了数值模拟,并利用分岔图、三维谱图、轴心轨迹和Poincaré映射图等方法分析了系统的非线性动力学特性.研究发现,随着转速的变化,系统响应演化出了倍周期运动、概周期运动、混沌运动和倍周期分岔等典型的非线性动力学行为.在与忽略了叶片振动的转子系统对比后发现,叶片振动使转子发生混沌运动的转速区域增大.在某些参数条件下,采用不同的叶片刚度,叶片振动可能引起转子系统产生混沌运动.     

弹性支承滑动轴承不平衡转子系统非线性动力稳定性和分岔的研究

研究弹性支承滑动轴承不平衡转子系统的稳定性及分岔特性。建立了弹性支承-滑动轴承-转子非线性动力系统的力学模型，在油膜力非线性的情况下，应用数值模拟，采用打靶法计算了刚性转子系统的周期解，并与龙格-库塔法计算的结果进行了对比，依据Floquet理论，分析了周期解的稳定性，再结合龙格-库塔法、Poineare映射法作出了系统运动分岔图。最后，讨论了轴的柔性对转子系统运动稳定性的影响。     

迷宫密封转子系统非线性动力稳定性的研究

研究迷宫密封对转子系统动力稳定性的影响，迷宫密封的气动力采用Muszynska非线性力模型，计算了单盘Jeffcott转子非线性动力学特性。对Jacobi矩阵的分析表明，在密封力的影响下，转子达到一定转速后开始失稳，发生Hopf分岔，进入周期涡动状态，涡动幅度随转速的提高而增大，提高到一定程度，密封和转子发生碰摩，采用Runge-Kutta法数值模拟了转子的轴心轨迹。最后分析了迷宫密封的物理和结构参数对系统运动特性的影响。     

多种非线性力作用下不平衡弹性转子的分岔特性

研究了4自由度不平衡弹性转子在非线性油膜力、非线性内阻力和非线性弹性力联合作用下的动力学特性。结果表明，当只有非线性油膜力作用时，转子只存在由于油膜失稳而导致的倍周期分岔。而当非线性油膜力与非线性内阻力共同作用时，在油膜失稳后，转子产生低频振动。转速继续增加，还会诱发内阻失稳，产生概周期运动。在倍周期分岔中，存在分岔激变现象。本文发现的由于油膜涡动而导致的内阻失稳(概周期运动)是一种未见报道的转子失稳模式(组合失稳)，它与油膜失稳(倍周期运动)一起可作为转子故障诊断的典型失稳模式。     

非线性转子-轴承系统涡动的机械化数学分析

为研究转子一轴承系统中非线性油膜力引起的半速涡动，本文给出了将吴文俊消去法和符号计算相结合的分析方法。基于短轴承假设，得到了单盘转子系统涡动时盘心、轴心及涡动角速度相对于无量纲转速的关系式。分析研究了转子涡动角速度变化规律及出现的双稳态现象。     

Nonlinear analysis of a rub-impact rotor supported by turbulent couple stress fluid film journal bearings under quadratic damping

This work reports a numerical study undertaken to investigate the dynamic response of a rotor supported by two turbulent flow model journal bearings with nonlinear suspension and lubricated with couple stress fluid under quadratic damping. This may be the first time that analysis of rotor-bearing system considered the quadratic damping effect. The dynamic response of the rotor center and bearing center are studied. The analysis methods employed in this study are inclusive of the dynamic trajectories of the rotor center and bearing center, power spectra, Poincaré maps and bifurcation diagrams. The maximum Lyapunov exponent analysis is also used to identify the onset of chaotic motion. The modeling results provide some useful insights into the design and development of rotor-bearing system for rotating machinery that operates at highly rotational speed and highly nonlinear regimes.     

Fault diagnosis of a rotor bearing system using response surface method

Dynamic analysis of a high-speed rotor bearing systems is challenged by their highly nonlinear and complex properties. Hence, an approximate response surface method (RSM) is utilized to analyze the effects of design and operating parameters on the vibration signature of a rotor-bearing system. This paper focuses on accurate performance prediction, which is essential to the design of high performance rotor bearing system. It considers distributed defects such as internal radial clearance and surface waviness of the bearing components. In the mathematical formulation the contacts between the rolling elements and the races are considered as nonlinear springs, whose stiffnesses are obtained by using Hertzian elastic contact deformation theory. The governing differential equations of motion are obtained by using Lagrange's equations. In terms of the feature that the nonlinear bearing forces act on the system, a reduction method and corresponding integration technique is used to increase the numerical stability and decrease computer time for system analysis. Parameters effects are analyzed together and its influence considered with DOE and Surface Response Methodology are used to predict dynamic response of a rotor-bearing system.     

非线性系统周期强迫不平衡响应的稳定性分析

多自由度强非线性系统是工程实际中经常遇见的一类模型,利用非线性动力学分析中的打靶法求解该类系统的周期解,并对Flopuet主导特征值判断周期解的失稳方式,利用该方法对旋转机械中的一个具体模型;双盘县臂柔性转子-非同心型挤压油膜阻尼器（SFD）系统周期强迫不平衡响应的稳定性和分岔行为进行了分析,分析表明,在该系统中存在着第二Hopf分岔、倍周期分岔、鞍-结分岔三种分岔形式。     

Turbocharger rotor dynamics with foundation excitation

To investigate the effect of foundation excitation on the dynamical behavior of a turbocharger, a dynamic model of a turbocharger rotor-bearing system is established which includes the engine’s foundation excitation and nonlinear lubricant force. The rotor vibration response of eccentricity is simulated by numerical calculation. The bifurcation and chaos behaviors of nonlinear rotor dynamics with various rotational speeds are studied. The results obtained by numerical simulation show that the differences of dynamic behavior between the turbocharger rotor systems with/without foundation excitation are obviously. With the foundation excitation, the dynamic behavior of rotor becomes more complicated, and develops into chaos state at a very low rotational speed.     

Nonlinear analysis of a rub-impact rotor-bearing system with initial permanent rotor bow

A general model of a rub-impact rotor-bearing system with initial permanent bow is set up and the corresponding governing motion equation is given. The nonlinear oil-film forces from the journal bearing are obtained under the short bearing theory. The rubbing model is assumed to consist of the radial elastic impact and the tangential Coulomb type of friction. Through numerical calculation, rotating speeds, initial permanent bow lengths and phase angles between the mass eccentricity direction and the rotor permanent bow direction are used as control parameters to investigate their effect on the rub-impact rotor-bearing system with the help of bifurcation diagrams, Lyapunov exponents, Poincaré maps, frequency spectrums and orbit maps. Complicated motions, such as periodic, quasi-periodic even chaotic vibrations, are observed. Under the influence of the initial permanent bow, different routes to chaos are found and the speed when the rub happens is changed greatly. Corresponding results can be used to diagnose the rub-impact fault in this kind of rotor systems and this study may contribute to a further understanding of the nonlinear dynamics of such a rub-impact rotor-bearing system with initial permanent bow.     

Investigation on dynamic characteristics of a rod fastening rotor-bearing coupling system with fixed-point rubbing

The aim of this paper is to gain insight into the nonlinear vibration feature of a dynamic model of a gas turbine. First, a rod fastening rotor-bearing coupling model with fixed-point rubbing is proposed, where the fractal theory and the finite element method are utilized. For contact analysis, a novel contact force model is introduced in this paper. Meanwhile, the Coulomb model is adopted to expound the friction characteristics. Second, the governing equations of motion of the rotor system are numerically solved, and the nonlinear dynamic characteristics are analyzed in terms of the bifurcation diagram, Poincaré map, and time history. Third, the potential effects provided by contact degree of joint interface, distribution position, and amount of contact layer are discussed in detail. Finally, the contrast analysis between the integral rotor and the rod fastening rotor is conducted under the condition of fixed-point rubbing.

     

Nonlinear dynamics of a cracked rotor in a maneuvering aircraft

The nonlinear dynamics of a cracked rotor system in an aircraft maneuvering with constant velocity or acceleration was investigated, The influence of the aircraft climbing angle on the cracked rotor system response is of particular interest and the results show that the climbing angle can markedly affect the parameter range for bifurcation, for quasiperiodic response and for chaotic response as well as for system stability. Aircraft acceleration is also shown to significantly affect the nonlinear behavior of the cracked rotor system, illustrating the possibility for on-line rotor crack fault diagnosis.