圆板振子超谐分岔和混沌运动的实验研究

设计了非线性圆板混沌实验振动台,就轴对称圆板在简谐载荷作用下的非线性动力学行为进行了较为系统的实验研究,理论分析和数值计算,对基础作简谐运动,周边固支圆板,进行了实验。通过测量时间－中心挠度的加速度曲线,进行快速傅立叶变换（FFT）分析,实验发现了对称破缺,超谐分岔,调幅调相等复杂现象;对基础作简谐运动,周边固支,中心加质量块的圆板,进行了实验,通过测量时间－周边应变曲线,进行FFT分析,实验发现了混沌,对称破缺和恢复及超谐分岔等复杂动力学行为。     

水下冲击波载荷作用下气背固支圆板动态毁伤实验

为了研究水下近爆载荷作用下舰艇水下结构的动态变形及失效毁伤模式,利用水下爆炸冲击波等效加载装置结合高速摄影技术,对两种厚度的气背固支5A06铝合金圆板进行了水下冲击波加载实验。得到了气背固支圆板塑性大变形、中心拉伸撕裂和边界剪切破坏3种典型失效模式的动态响应历程。比较分析了冲击波强度、冲击因子、损伤参数和响应参数4种毁伤判据对该类靶板毁伤模式的判别能力。实验结果表明:考虑了结构因素的损伤参数和响应参数能够更为全面的判别结构的失效毁伤情况。     

圆板在物体撞击下的非线性动力响应

本文在Von Kármán大位移的意义上,利用虚位移原理伽辽金方法建立了圆板在物体撞击下的非线性动力响应的控制微分方程,在研究响应问题时,考虑了冲击载荷与圆板位移响应之间的耦合影响,文中使用时间增量法和奇异摄动理论求解问题的控制方程,获得了固支圆板非线性动力响应的近似解,并且求解了具体算例,绘出了圆板位移、应力响应曲线以及冲击力随时间的变化曲线。     

圆板在物体撞击下的非线性动力响应

本文在Von Kármán大位移的意义上,利用虚位移原理伽辽金方法建立了圆板在物体撞击下的非线性动力响应的控制微分方程,在研究响应问题时,考虑了冲击载荷与圆板位移响应之间的耦合影响,文中使用时间增量法和奇异摄动理论求解问题的控制方程,获得了固支圆板非线性动力响应的近似解,并且求解了具体算例,绘出了圆板位移、应力响应曲线以及冲击力随时间的变化曲线。     

预应力条件下轴对称圆板的响应解

本文研究预应力条件下轴对称简支和固支圆板的瞬态响应,利用振型展开和Laplace变换给出解析表达式,提出简化型圆板的边界条件,利用Hankel变换和Laplace变换给出简捷的解,针对几种边界状态,比较了其频率和响应,同时讨论了几种常见的瞬态载荷的结构响应形式。     

非均匀圆柱型正交各向异性圆板的弯曲

研究了非均匀圆柱型正交各向异性圆板在均布横向载荷作用下的弯曲问题，求得了折算刚度随半径按指数规律变化的非均匀圆柱型正交各向异性圆板弯曲问题的渐近解，给出了周边固支和简支条件下的渐近解．通过算例可以看出，这种非均匀性对圆板中心挠度的影响是显著的     

厚圆板轴对称振动的弹性力学解

本文以轴对称三维弹性力学基本方程为基础,导出厚圆板强迫振动的状态方程式。利用Ｍａｃｌａｕｒｉｎ级数和Ｓｙｌｖｅｓｔｅｒ定理,厚圆板的位移和应力可以用中面位移和应力的微分算子表示。通过载荷分解和圆板表面条件,可以得到厚圆板在对称载荷与反对称载荷作用下的振动控制方程。求解了厚圆板在周边固支和简支条件下的对称与反对称的自由振动问题。通过数值计算得到了这两类自由振动的固有频率。本文的方法适用于求解厚圆板在     

近距空爆载荷作用下固支方板的变形及破坏模式

为探讨战斗部近炸下舰船结构的变形模式,为后续理论分析和数值模拟提供实验数据,通过模型实验,分析了固支大尺寸方板在近距空爆载荷下的变形和破坏模式。在此基础上,通过测量板破裂后各裂瓣的减薄率,利用双向应变假设和体积等效原理确定了Q235钢在中部拉伸撕裂破坏模式下的断裂极限应变;根据实验模型的变形和破坏模式,基于刚塑性假设和能量密度准则提出了结构在局部爆炸载荷下的破裂判据,并对实验结果进行了预测。结果表明,随着载荷强度的增大,固支方板呈现出3种不同的变形和破坏模式;利用破裂判据对实验工况进行了预测,预测结果与实验吻合较好。     

撞击载荷下数字电子散斑离面位移的测试研究1）

采用瞬态光学图像采集技术，实现了动态数字散斑干涉（ＤＳＰＩ）．以周边固支圆板受法向撞击集中载荷为例，对其离面位移场进行了测试．实验值与动有限元计算结果比较，两者是比较接近的     

撞击载荷下数字电子散斑离面位移的测试研究1）

采用瞬态光学图像采集技术，实现了动态数字散斑干涉（ＤＳＰＩ）．以周边固支圆板受法向撞击集中载荷为例，对其离面位移场进行了测试．实验值与动有限元计算结果比较，两者是比较接近的     

A new technique for solving non-axially symmetrical large deflection of elastic and thin circular plates

I.IntroductionBecauseofthenonlinearityoflargedeflectionproblemofthinplates,itisquitedifficulttoobtainitsaccuratesolution.Thereforeanapproximatesolutiontoitobtainedbyanappropriatemethodisdesired.Thetechniquesocalledperturbation,beingabletogiveresultswithadequateprecision,isofaprevailingandeffectiveonetobegenerallyaccepted.W.Z.Chientl]succesfullyobtainedanapproximatesolutiontothelargedeflectionproblemofthincircularplatefie-curalaxisymmetricallybyperturbationtechnique.X.Z.Wangl'Jgainedthedispl…     

含内埋圆形或椭圆形脱层复合材料层合板的屈曲分析

用瑞里-李兹方法来建立含内埋圆形或椭圆形脱层板的屈曲分析模型．首先利用Heaviside阶梯函数，假定一种适合于脱层板的位移模式．然后由变分原理并进行线性化得出了含内埋圆形或椭圆形脱层板的屈曲特征方程．最后通过将含表面脱层的各向同性和各向异性板的屈曲载荷与其它文献进行比较，验证了该文分析方法的正确性，并分析了含内埋圆形或椭圆形脱层的各向同性、正交各向异性和角铺层层合板各种参数对屈曲载荷的影响．     

Postbuckling and postyielding of edge-compressed circular plates

Theories describing postbuckling and postyielding of circular plates under uniform edge compression have been published by several authors in recent years. There is, however, no experimental verification available for any of these theoretical approaches. The present paper reviews the theoretical work dealing with the title problem and describes some experiments on circular plates under uniform edge compression. The experimental results are compared with the predictions of the applicable theories. The importance of material strain hardening and the phenomenon of ‘jamming’ of plastic hinges is discussed.     

Limit analysis of circular and annular plates

Summary The problem of the plastic collapse load of circular and annular plates is dealt with. For simply supported and built-in edge plates, different loading conditions are considered and the annular plates are studied for varying geometries. The solutions obtained according to both Tresca's and Mises' yield conditions are exact in the sense of limit analysis.

---

Zur Grenztragfähigkeits-Theorie bei Kreis- und Kreisringplatten

Übersicht Es werden Traglasten von Kreis- bzw. Kreisringplatten ermittelt. Dabei werden gelenkig gelagerte sowie eingespannte Kreisplatten bei verschiedener Belastung und Kreisringplatten bei verschiedener Geometrie betrachtet. Die mit Hilfe der Fließbedingungen nach Tresca bzw. v. Mises erhaltenen Lösungen sind exakt im Sinne der Grenztragfähigkeits-Theorie.

     

Some static and dynamic problems concerning non-linear behavior of plates and shallow shells with discontinuous boundary conditions

Berger's field equations are generalized to dynamic phenomena in anisotropic plates and shallow shells the anisotropy being either of a cylindrically orthotropic or rectilinearly orthotropic type. Under the assumption that the rim of the structure is prevented from inplane motions explicit equations for the coupling parameter are given. Method of solution in the dynamic case is illustrated by an example involving isotropy and original axial symmetry of the structure. It is shown that for the non-linear oscillations of built-in circular plates a close agreement is reached with the results obtained by means of the Von Kármán field equations and a different coordinate function. The procedure suggested for solution of dynamic problems associated with the discontinuities of the boundary conditions is discussed and illustrated on an isotropic case involving a circular plate partially simply supported and partially clamped at the periphery.A numerical example is given concerning static behavior of an infinite isotropic strip uniformly loaded and simply supported along the edges except for two symmetrically situated built-in segments. The dependence of the average moment of clamping on the width of the built-in segments as well as on the load intensity for a fixed width of the segments is displayed on graphs.     

正多边形板的塑性动力响应小挠度分析和大挠度分析

本文基于刚性板块的总体平衡,建立运动方程,首次完整地分析了正多边形板的塑性动力响应,得到了周边简支或固支的正多边形板在均布矩形脉冲作用下的塑性动力响应小挠度解析解,并用膜力因子法作了大挠度理论分析。所得的结果包含了作为特例的正方形板、圆板等情形,具有广泛应用价值,同时具有理论上和数学上的意义。     

Effect of built-in edges on 3-D vibrational characteristics of thick circular plates

The vibrational characteristics of thick circular plates built into a rigid medium in the vicinity of the circumference are studied. The analysis procedure is based on the exact, small-strain, three-dimensional linear elasticity theory. In the analysis, the plate is considered as comprising an inner circular disc with free upper and lower surfaces connected to an outer annulus that is built into the rigid medium. The Chebyshev polynomials multiplied by suitable boundary characteristic functions are selected as the admissible functions of the displacement functions, and the three-dimensional displacement fields in each part can be expressed accordingly. Through the Ritz method, the eigenvalue equations can be established for the inner disc and the outer annulus, respectively. Utilizing the displacement continuity conditions at the interface between the two parts, the eigenvalue equation for the whole plate is derived. Convergence and comparison studies demonstrate the correctness and accuracy of the present method. The effect of structural parameters such as plate thickness, built-in length and the end condition on eigenfrequencies of circular plate is investigated in detail. It is shown that with the increase of plate thickness, the effect of the built-in annulus on eigenfrequencies significantly increases. Therefore, for a thick plate, the flexibility of the built-in part should be considered in the dynamic analysis.     

Three-dimensional stress and free vibration analyses of functionally graded plates with circular holes by the use of the graded finite element method

Static and free vibration analyses of plates with circular holes are performed based on the three-dimensional theory of elasticity. The plates are made of a functionally graded material (FGM), and the volume fractions of the constituent materials vary continuously across the plate. The effective properties of the FGM plate are estimated by using the Mori–Tanaka homogenization method. A graded finite element method based on the Rayleigh–Ritz energy formulation is used to solve the problem. Effects of different volume fractions of the materials and hole sizes on the behavior of FGM plates under uniaxial tension are investigated. Natural frequencies of a fully clamped FGM plate with a circular cutout are derived. The results obtained are compared with available experimental data.     

一种求解含振子及弹性支承圆板振动的新方法

将富里叶－贝塞尔级数引入积分方程[1],推导出一种研究含振子及弹性支承圆板振动特性的新方法,根据积分方程和富里叶－贝塞尔级数理论,首先用第一类贝塞尔函数构造圆板的格林函数,然后由叠加原理将圆板的自由振动问题转化为积分方程的特征值问题;进面将积分方程形式的特征值问题转化为无穷阶矩阵的标准特征值问题,计算时根据精度的要求,截取无穷阶矩阵的标准特征值为有限阶矩阵的标准特征值问题,采用Q－R算法,计算实践表明,本方法不仅具有运算简捷,精度高,适用性强的特点,而且能从整体上对系统的动态性加以研究,从而为这类系统的优化设计提供有;力的 工具。     

A FURTHER STUDY OF THE THEORY OF ELASTIC CIRCULAR PLATES WITH NON－KIRCHHOFF－LOVE ASSUMPTIONS

ＡＦＵＲＴＨＥＲＳＴＵＤＹＯＦＴＨＥＴＨＥＯＲＹＯＦＥＬＡＳＴＩＣＣＩＲＣＵＬＡＲＰＬＡＴＥＳＷＩＴＨＮＯＮ－ＫＩＲＣＨＨＯＦＦ－ＬＯＶＥＡＳＳＵＭＰＴＩＯＮＳＣｈｉｅｎＷｅｉ－ｚａｎｇ（钱伟长）ＲｕＸｕｅ－ｐｉｎｇ（茹学萍）（ＳｈａｎｇｈａｉＵｎｉ...