钢管混凝土柱-钢梁节点的力学性能分析

基于弹塑性有限元理论建立了钢管混凝土柱-钢梁节点荷载-位移全过程非线性有限元模型,在单元分析中采用改进的AUL表述推导得到梁柱单元刚度矩阵方程,同时考虑了材料的物理非线性和单元的几何非线性,并编制了非线性有限元程序NLFEACFST。采用该模型对相关研究者和作者进行的节点试验进行了分析,理论计算结果与试验结果比较表明,该模型具有很好的适用性和精度。在理论分析模型得到试验结果验证的基础上,对典型的中柱节点进行了荷载-位移全过程非线性特性分析,并对影响节点承载力和荷载-位移骨架曲线的因素进行了参数分析,为进一步从理论研究钢管混凝土框架结构的力学性能创造了条件。     

钢筋混凝土剪力墙受火性能非线性分析

为了研究钢筋混凝土剪力墙的抗火性能,本文基于纤维元模型,提出了一种非线性分析方法。该方法无需计算截面的弯矩-曲率曲线族,计算过程中采用了高温下耦合的混凝土本构关系,其中考虑了混凝土高温热膨胀应变、瞬态热应变和徐变。编制了相应的非线性计算分析程序,程序考虑了轴力二阶效应的影响,计算得到了剪力墙跨中平面外挠度以及火灾下其跨...     

考虑非稳定蠕变及温度效应的碾压混凝有限元分析

本文将混凝土的瞬态热传导和徐变过程与内时损伤本构模型相结合、给出碾压混凝土考虑非稳定蠕变及温度影响下损伤破坏的非线性有限元计算格式，并编制出相应的分析程序，最后以实例进行了分析计算。     

考虑非稳定蠕变及温度效应的碾压混凝土有限元分析

本文将混凝土的瞬态热传导和徐变过程与内时损伤本构模型相结合，给出碾压混凝土考虑非稳定蠕变及温度影响下损伤破坏的非线性有限元计算格式，并编制出相应的分析程序，最后以实例进行了分析计算。     

钢筋混凝土结构非线性全过程分析方法及其应用

对普通钢筋混凝土结构和预应力混凝土结构在单调荷载及低周反复荷载的下受力全过程进行了模拟分析,程序设计中考虑了材料非线性,几何非线性,轴力二次矩,铺固钢筋的粘结滑移,混凝土的裂面效应,材料的双切线模量以及预应力的特点（包括次内力,预应力筋的应变滞后及其对混凝土裂面效应的影响等）等多种非线性因素的影响,典型算例表明,本文程序的计算值与试验结果吻合良好。     

钢管混凝土桥墩考虑粘结滑移效应的非线性纤维单元

基于粘结滑移理论和纤维模型建立了一个新的钢管混凝土桥墩单元,以提高钢管混凝土桥墩非线性分析的计算精度和计算效率。该单元是建立在小变形假定的基础上,同时忽略了剪切变形和扭转变形的影响。基于纤维模型的基本原理,将截面划分为不同的纤维组成,每根纤维的特性由材料的应力-应变本构关系描述,对截面上钢管、混凝土以及粘结滑移本构关系进行积分可以获得单元的非线性滞回特性;根据有限单元柔度法的基本理论,采用力的插值函数使单元始终满足轴力平衡和弯矩平衡条件。对比模型的计算结果和试验结果,可以看出本文模型具有良好的数值稳定性和鲁棒性,可以准确地计算钢管混凝土桥墩在复杂荷载作用下的滞回行为。最后本文对模型的适用性进行了讨论,分析了误差产生的原因并指出了需要进一步开展的工作。     

反复荷载下圆钢管型钢再生混凝土组合柱恢复力模型研究

为建立圆钢管型钢再生混凝土组合柱的恢复力模型,对11根圆钢管型钢再生混凝土组合柱试件进行了低周反复荷载试验研究,考虑了再生骨料取代率、配钢率及钢管径厚比等不同设计参数的影响,分析了组合柱的地震破坏形态及滞回性能。基于组合柱的力学特征及曲线形状,提出了圆钢管型钢再生混凝土组合柱骨架曲线的三折线参数模型,采用理论推导与数据拟合的方法确定了组合柱骨架曲线的模型参数。在此基础上,给出了组合柱的滞回规则和卸载规律,构建了组合柱的恢复力模型,计算滞回曲线与试验滞回曲线吻合良好,表明该恢复力模型较好地反映了反复荷载下组合柱的受力特征点及滞回性能,可为此类组合柱的推广提供技术参考。     

考虑几何与材料及静风荷载的非线性因素的大跨径桥梁静风稳定分析法

针对现有的桥梁静风稳定分析方法中存在的问题，提出了增量与内外两重迭代相结合的新方法，并且考虑了结构几何、材料和静风荷载非线性。在上述方法的基础上，编制了桥梁非线性空气静力稳定分析程序BNAP，并进行了相应的算例分析，所得结果表明该方法具有计算稳定和速度快的优点。最后，以一座主跨1000米的斜拉桥为例，分析了结构几何非线性、材料非线性和静风荷载非线性对大跨径桥梁空气静力稳定性的影响。     

架设阶段悬索桥静力问题的随机有限元分析

架设阶段的悬索桥不仅具有显著的几何非线性行为，而且存在材料特性的变异。本文建立了以增量形式表达的非线性摄动法随机有限元列式，并编制了悬索桥静力分析程序ＳＮＡＰ。针对一座国内在建的悬索桥，计算了该桥在某一施工阶段考虑缆索弹性模量随机性时主梁跨中点位移的变化。结果表明，材料随机性的影响十分明显。     

有初应力钢筋混凝土压弯扭构件非线性有限元分析

钢管初应力是钢管混凝土在大跨度桥梁,高层超高层建筑应用中广大工程技术人员关心的问题,本文在钢材随动强化模型和混凝土边界模型的基础上编制了计算有初应力的钢管钢混凝压弯扭构件全过程曲线的非线性有元程序。     

一种基于直接计算高阶奇异积分的断裂力学双边界积分方程分析法

相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果.      

汶川地震诱发文家沟巨型滑坡 碎屑流基本特征及成因机制初步分析


2008年5月12日,汶川M80地震在四川省绵竹市清平乡文家沟内诱发一巨型滑坡。通过现场调查得知,滑坡前后缘高差455m,厚度20～30m,滑面为基岩层面,初始方量2750×107m3。滑体在运动中转化为碎屑流。滑坡-碎屑流总的水平运动距离为4022m,垂直运动距离为1443m,遗留的堆积物体积达5×107m3。滑坡距映秀—北川断裂仅36km,位于其下盘,地震烈度达XI度。滑坡导致文家沟中48人遇害,并形成一条完整的地震次生地质灾害链。初步分析表明滑坡启动速度快,滑坡向碎屑流转化过程明显、地点明确。碎屑流运动过程复杂,伴有强烈的“气垫效应”和“前缘气浪冲击效应”。作者认为,文家沟滑坡的高启动速度是长持时强烈地震动作用的结果,与山体的猛烈碰撞是导致滑体解体并转化为碎屑流的原因。     

Preface: Orbits around asteroid

One of the core issues in modern celestial mechanics is the orbital dynamics in the near-regime gravitational field of as- teroids, which provides deep insights into the mathematical nature of a class of nonlinear systems, and plays as a critical basis for in situ explorations of different science goals. Lots of efforts have been made to reveal the characteristics of orbital motion in the vicinity of asteroids, and to improve the skills of asteroid research in methodology.     

Effet de l'anisotropie élastique cristalline sur la distribution des facteurs de Schmid à la surface des polycristauxInfluence of crystalline elasticity anisotropy on Schmid factor distribution at the free surface of polycrystals

Experimental studies of the plasticity mechanisms of polycrystals are usually based on the Schmid factor distribution supposing crystalline elasticity isotropy. A numerical evaluation of the effect of crystalline elasticity anisotropy on the apparent Schmid factor distribution at the free surface of polycrystals is presented. Cubic elasticity is considered. Order II stresses (averaged on all grains with the same crystallographic orientation) as well as variations between averages computed on grains with the same crystallographic orientation but with different neighbour grains are computed. The Finite Element Method is used. Commonly studied metals presenting an increasing anisotropy degree are considered (aluminium, nickel, austenite, copper). Concerning order II stresses in strongly anisotropic metals, the apparent Schmid factor distribution is drifted towards small Schmid factor values (the maximum Schmid factor is equal to 0.43 instead of 0.5) and the slip activation order between characteristic orientations of the crystallographic standard triangle is modified. The computed square deviations of the stresses averaged on grains with the same crystallographic orientation but with different neighbour grains are a bit higher than the second order ones (inter-orientation scatter). Our numerical evaluations agree quantitatively with several observations and measures of the literature concerning stress and strain distribution in copper and austenite polycrystals submitted to low amplitude loadings. Hopefully, the given apparent Schmid factor distributions could help to better understand the observations of the plasticity mechanisms taking place at the free surface of polycrystals. To cite this article: M. Sauzay, C. R. Mecanique 334 (2006).     

Nonlinear behavior of matrix-inclusion composites under high confining pressure: application to concrete and mortar

This paper is devoted to a micromechanics-based simulation of the response of concrete to hydrostatic and oedometric compressions. Concrete is described as a composite made up of a cement matrix in which rigid inclusions are embedded. The focus is put on the role of the interface between matrix and inclusion which represent the interfacial transition zone (ITZ). A plastic behavior is considered for both the matrix and the interfaces. The effective response of the composite is derived from the modified secant method adapted to the situation of imperfect interfaces. To cite this article: T.H. Le et al., C. R. Mecanique 336 (2008).     

Dynamics and Breakup of Viscoelastic Liquids (A Review)

The phenomena of hydrodynamic breakup of liquid jets, drops, films, bridges, and filaments are reviewed for liquids with viscoelastic properties. The reasons for breakup are capillary instabilities, collisions with rigid obstacles, and other forms of dynamic action. The relationship between the properties of the liquids and the features of the breakup process is discussed.     

Flow stability analysis and excitation using pulsating jets

Classical flow stability applied to transition from laminar to turbulent flow may also describe the behavior of vorticity fluctuations created by a pulsating jet placed along a solid boundary. A numerical laminar flow experiment involving a pulsating jet placed along the surface of a duct with flow separation downstream, resulted in eliminating most part of the separated flow region. Applying the same approach to a turbulent flow, it was possible to develop a turbulent stability flow formulation and apply successfully turbulent pulsating jet flow separation control. To cite this article: D. Skamnakis, K. Papailiou, C. R. Mecanique 333 (2005).