复变量移动最小二乘法及其应用

提出了复变量移动最小二乘法，并详细讨论了基于正交基函数的复变量移动最小二乘 法. 然后，将复变量移动最小二乘法和弹性力学的边界无单元法结合，提出了弹性力学的复 变量边界无单元法，推导了相应的公式，并给出了数值算例. 基于正交基函数的复变量移动 最小二乘法的优点是不形成病态方程组、精度高，所形成的无网格方法计算量小. 复变量边 界无单元法是边界积分方程的无网格方法的直接列式法，容易引入边界条件，且具有更高的 精度.     

基于等效系统假定的变厚度板弯曲广义积分变换解

针对等厚度薄板的弯曲问题,研究人员已给出了基于不同数值算法的经典数值解。针对变厚度薄板弯曲问题的解答较少,且以有限元数值模拟计算为主,计算耗时较大。本文基于广义积分变换原理建立了求解变厚度等效系统的广义积分变换算法,分析了线性和二次变化的变厚度板在多种边界条件下的弯曲问题,利用文献已发表结果同本文建立的广义积分变换解进行验证。计算结果表明,本文建立的基于广义积分变换的变厚度板弯曲求解方法具有较高准确性。同时,通过参数化分析手段,分别利用广义积分变换方法和有限元数值模拟方法讨论了不同边界约束和长宽比等条件对中心点处挠度的影响,计算结果具有较好的一致性,证明本文建立的广义积分变换方法可用于求解变厚度板弯曲问题,且具有较高的准确性。     

求解变分型积分方程的一种新型数值方法——有限变分法

将作者提出的多虚拟裂纹扩展法(MVCE法)拓展为求解变分型积分方程问题的一种新型数值方法——有限变分法(FVM)。它的基本思想是,给定有限个(N个)局部变分模式,将所求解的未知量用适当的方法离散化,针对这N个局部变分模式列出N个方程,求解N个未知系数,从而求得未知量。单一未知变量FVM的最终方程组的系数矩阵通常是一个对称的窄带矩阵,对角元是大数,有很好的数值计算性能。用FVM求解了三维I型裂纹前缘的应力强度因子(SIF)分布。利用基于FVM的通用权函数法计算程序,可以高精度和高效率地求解表面力、体积力和温度载荷共同作用情况下三维裂纹前缘SIF的分布及其时间历程。FVM可以被推广到更广泛的领域,是一个求解变分型积分方程问题的普遍适用的新型数值方法。     

一种改进格林元方法及在渗流问题中的应用

采用格林公式和基本解推导出直接边界积分方程来求解渗流问题.边界积分方程数值离散基于格林元方法(Green element methond),改进了原方法中压力和压力导数的求解方法,命名为混合边界元方法(Mixed boundary element method).相较于格林元类方法,该方法显式考虑了求解节点的外法向流量值和压力值,并使求得的数值解在求解区域上能够连续,符合实际的物理过程,在不增加额外未知数的情况下提高了计算精度.分析了不同网格类型对模拟计算结果的影响,并对稳定渗流问题、非稳定(瞬态)渗流问题和非稳态问题进行了实例计算,结果显示改进方法提高了计算精度,并对各类渗流问题有较好的适应性.     

弹性波混合差分解法的透射边界条件

文中将基于离散应力、速度混合变量弹性波方程的各种数值解法统称为混合差分法，该文研究这类解法中人工边界的透射边界条件。基于波动沿边界法向传播的特征量分析，给出了横观各向同性介质中复杂形状边界的透射条件。该文是一种局部透射条件，所需计算量极小。文中将此方法与交错网格差分解法结合并应用于横观各向同性介质弹性波计算。数值算例及反射系数分析表明，该方法很好地消除了人工边界对来波的反射。     

求解三维裂纹前缘SIF分布时间历程的通用权函数法和有限变分法

将三维热权函数法扩展为适用于表面力、体积力和温度载荷的通用权函数法(UWF).推导出以变分型积分方程表达的UWF法基本方程,从变分的角度,将求解三维热权函数法基本方程的多虚拟裂纹扩展法(MVCE)改造为可以适用于一般的变分型积分方程的一类新型数值方法--有限变分法(FVM).在FVM中可以引入无穷多种线性无关的局部变分模式,可以根据计算要求在求解域中插入任意多个计算节点,单一型裂纹问题FVM所得到的最终方程组的系数矩阵总是一个对称的窄带矩阵,而且对角元总是大数,具有良好的数值计算性能.FVM对于SIF沿裂纹前缘急剧变化的复杂情况具有较好的数值模拟能力和较高的计算精度,利用自身一致性,可以求得三维裂纹前缘SIF的高精度解.     

饱和多孔介质中的混合有限元法和有限应变下应变局部化分析

对基于Biot理论的饱和多孔介质中动力-渗流耦合分析提出了一个耦合场混合元．固相位移、应变和有效应力以及流相压力、压力梯度和Darcy速度在单元内均处理为独立变量分别插值．基于胡海昌-Washizu三变量广义变分原理给出的饱和多孔介质动力-渗流耦合问题控制方程的单元弱形式，导出了单元公式．进一步导出了考虑压力相关非关联塑性的非线性单元公式和发展了相应的一致性算法．对几何非线性分析，采用了共旋公式途径．数值结果例题显示所发展耦合场混合元模拟大应变下由应变软化引起以应变局部化为特征的渐进破坏现象的性能．     

粘弹性半空间上刚体的垂直振动

根据弹性力学混合边值条件，建立了粘弹性半空间上刚体垂直振动的对偶积分方程，并用正交多项式化积分方程为线性代数方程组，并提出可以用围线积分和解析开拓原理把方程组系数的无穷积分化为有穷积分。计算结果与实测资料进行了比较，说明本方法是正确的。     

第二类抛物型变分不等式中的MRM方法

本文讨论了第二类抛物型变分不等式中的MRM(多重互易方法)方法。首先采用时间项半离散和隐格式方法将抛物型变分不等式化解为一个椭圆变分不等式，然后利用MRM-边界积分方程，将其化解为MRM-边界混合变分不等式，并给出了MRM-边界混合变分不等式解的存在唯一性。说明了该MRM-边界混合变分不等式与常规边界积分方程得到的边界混合变分不等式是一致的，并且具有更容易编程实现。这为使用MRM边界元方法数值求解抛物型变分不等式提供了方法和理论依据。文末给出了数值算例。     

弹性动力学高阶核无关快速多极边界元法

基于核无关的快速多极方法, 发展了一种弹性动力学问题的快速、高精度边界元分析方法. 采用基于二次曲面单元的Nystr?m 离散, 将边界积分方程转化为求和形式, 可以方便地进行加速计算;由于采用二次元, 边界元分析精度很高. 将一种新型快速多极方法用于Nystr?m 边界元法的加速计算, 该方法的数值实现简便、不依赖于积分方程基本解的表达式, 因此通用性很好;该方法还具有最优的计算量和存储量、精度高且可以控制. 结合Nystr?m 边界元系数矩阵和快速多极方法转换矩阵的特点, 提出一种大幅度降低边界元内存消耗的策略. 数值结果表明, 该方法无论在分析精度, 还是计算速度和内存消耗上, 都大大优于同类方法, 是一种快速、通用的工程弹性动力学问题大规模数值分析方法.      

Mixed finite element for two-dimensional incompressible convective Brinkman-Forchheimer equations

In this work, the two-dimensional convective Brinkman-Forchheimer equations are considered. The well-posedness for the variational problem and its mixed finite element approximation is established, and the error estimates based on the conforming approximation are obtained. For the computation, a one-step Newton(or semi-Newton)iteration algorithm initialized using a fixed-point iteration is proposed. Finally, numerical experiments using a Taylor-Hood mixed element built on a structured or unstructured triangular mesh are implemented. The numerical results obtained using the algorithm are compared with the analytic data, and are shown to be in very good agreement. Moreover,the lid-driven problem at Reynolds numbers of 100 and 400 is considered and analyzed.     

On variational formulations with rigid-body constraints for finite elasticity: Applications to 2D and 3D finite element simulations

We investigate a recently proposed variational principle with rigid-body constraints and present an extension of its implementation in three dimensional finite elasticity problems. Through numerical examples, we illustrate that the proposed variational principle with rigid-body constraints is applicable to both single field and mixed finite elements of arbitrary order and geometry, e.g. triangular/tetrahedral and quadrilateral/hexagonal elements, in two and three dimensions. Moreover, we demonstrate that, as compared to the commonly adopted approach of discretizing the rigid domains with standard finite elements, the proposed formulation requires neither discretization nor numerical integration in the interior of each rigid domain. As a comparative result, the variational formulation may reduce the total number of degrees of freedom of the resulting finite element system and provide improved accuracy.     

非饱和多孔介质中热-渗流-力学耦合的混合元法

提出了一个非饱和多孔介质中热-渗流-力学耦合分析的混合有限元 方法. 固相位移、应变和净应力；孔隙水和气的压力、压力空间梯度和Darcy速度；多相混 合介质的温度、温度空间梯度和热流量在单元内均为独立变量分别插值. 基于胡海 昌-Washizu 三变量广义变分原理给出的多孔介质中热-渗流-力学耦合问题控制方程的单元弱形式，导 出了单元公式. 采用共旋公式进行几何非线性分析. 数值结果证明了所提出的单元模拟以 应变局部化为特征的渐进破坏的能力     

Finite deformation plate theory and large rigid-body motions

A refined non-linear first-order theory of multilayered anisotropic plates undergoing finite deformations is elaborated. The effects of the transverse shear and transverse normal strains, and laminated anisotropic material response are included. On the basis of this theory, a simple and efficient finite element model in conjunction with the total Lagrangian formulation and Newton-Raphson method is developed. The precise representation of large rigid-body motions in the displacement patterns of the proposed plate elements is also considered. This consideration requires the development of the strain-displacement equations of the finite deformation plate theory with regard to their consistency with the arbitrarily large rigid-body motions. The fundamental unknowns consist of six displacements and 11 strains of the face planes of the plate, and 11 stress resultants. The element characteristic arrays are obtained by using the Hu-Washizu mixed variational principle. To demonstrate the accuracy and efficiency of this formulation and compare its performance with other non-linear finite element models reported in the literature, extensive numerical studies are presented.     

GURTIN VARIATIONAL PRINCIPLE AND FINITE ELEMENT SIMULATION FOR DYNAMICAL PROBLEMS OF FLUID-SATURATED POROUS MEDIA

Based on the theory of porous media,a general Gurtin variational principle for theinitial boundary value problem of dynamical response of fluid-saturated elastic porous media isdeveloped by assuming infinitesimal deformation and incompressible constituents of the solid andfluid phase.The finite element formulation based on this variational principle is also derived.Asthe functional of the variational principle is a spatial integral of the convolution formulation,thegeneral finite element discretization in space results in symmetrical differential-integral equationsin the time domain.In some situations,the differential-integral equations can be reduced to sym-metrical differential equations and,as a numerical example,it is employed to analyze the reflectionof one-dimensional longitudinal wave in a fluid-saturated porous solid.The numerical results canprovide further understanding of the wave propagation in porous media.     

用有限元广义混合法分析不可压缩或几乎不可压缩弹性体

不可压缩或几乎不可压缩问题在数学上表现为最小 势能原理中的某些项趋于无穷大,使得有限元方程产生病态。本文给出了不可压缩或几乎不可压缩弹性分析的广义混合变分原理,以此为基础建立了该类问题的有限元广义混合法。该变分原理的泛函中不含有上面这种奇异项,故其有限元方程不会产生病态。算例表明该有限元法可以同时进行可压缩、不可压缩或几乎不可压缩弹性分析,且精度良好;有限元常规位移法及Hermann法是该法的特例。     

Penalty finite element method for Navier–Stokes equations with nonlinear slip boundary conditions

The penalty finite element method for Navier–Stokes equations with nonlinear slip boundary conditions is investigated in this paper. Since this class of nonlinear slip boundary conditions include the subdifferential property, the weak variational formulation is a variational inequality problem of the second kind. Using the penalty finite element approximation, we obtain optimal error estimates between the exact solution and the finite element approximation solution. Finally, we show the numerical results which are in full agreement with the theoretical results. Copyright © 2011 John Wiley & Sons, Ltd.     

Constrained Hamilton variational principle for shallow water problems and Zu-class symplectic algorithm

In this paper, the shallow water problem is discussed. By treating the incompressible condition as the constraint, a constrained Hamilton variational principle is presented for the shallow water problem. Based on the constrained Hamilton variational principle, a shallow water equation based on displacement and pressure (SWE-DP) is developed. A hybrid numerical method combining the finite element method for spatial discretization and the Zu-class method for time integration is created for the SWEDP. The correctness of the proposed SWE-DP is verified by numerical comparisons with two existing shallow water equations (SWEs). The effectiveness of the hybrid numerical method proposed for the SWE-DP is also verified by numerical experiments. Moreover, the numerical experiments demonstrate that the Zu-class method shows excellent performance with respect to simulating the long time evolution of the shallow water.     

薄板动态热耦合弯曲问题的拉普拉斯变换有限元法

以薄板动力热耦合弯曲问题的变分原理为基础，提出了一种解决该问题的拉普拉斯变换有限元法，该方法在拉氏域内建立和求解有限元方程，再将结果数值逆变换至时域，得到各给定时刻的解答，周边绝热简支方板的热冲击问题算例说明方法是成功的，该方法为研究薄板此类问题的可能性，其计算结果可供工程设计参考。     

Dual variational formulation for Trefftz finite element method of elastic materials

A dual variational principle is presented for Trefftz finite element analysis. The proof of the stationary conditions of the variational functional and the theorem on the existence of extremum are provided in this paper. They are boundary displacement condition, surface traction condition and interelement continuity condition. Based on the assumed intraelement and frame fields, element stiffness matrix equation is obtained which can easily be implemented into computer programs for numerical analysis with Trefftz finite element method. Two numerical examples are considered to illustrate the effectiveness and applicability of the proposed element model.