基于光纤光栅的分布式POS柔性基线测量方法

分布式位置姿态测量系统(POS)依靠传递对准来精确测量多任务成像传感器的多节点运动信息,然而,节点间的柔性基线精度限制了传递对准精度。针对此问题,提出了一种基于光纤光栅的分布式POS柔性基线测量方法。首先研究了光纤光栅形变测量方法,利用光纤光栅传感器获取变形位移和变形角度;然后利用光纤光栅的形变测量信息修正传递对准量测方程,重新建立传递对准模型;最后搭建了柔性基线测试实验平台,进行实验测试。实验结果表明,所提出的方法可以精确测量多节点之间的柔性基线,同时也可为分布式POS的应用提供强有力的支持。     

埋入式封装的光纤光栅传感器应变传递分析

推导了布拉格光纤光栅传感器所测应变与实际结构应变的关系,得出了平均应变传递率并与实际试验结果进行比较. 根据应变传递率确定了光纤的临界粘接长度，并推导了多层粘接时的应变传递情况，讨论了影响应变传递率的因素. 结果表明，光纤光栅的粘贴长度必须大于临界粘贴长度，且光纤光栅传感器所测应变需要加以修正才能得到实际结构应变.     

高应变率拉伸加载下无氧铜的本构模型

为了研究材料在高应变率拉伸加载下的动态响应,利用新型爆炸膨胀环实验技术开展了无氧铜试 样环的拉伸加载实验,采用激光干涉测试技术获得了试样环拉伸变形过程的径向速度历史。数值计算发现经 典JC模型不能较好地描述无氧铜试样环的膨胀过程,于是对JC模型进行了修改:增加了应变的指数硬化项 来描述拉伸变形的累积效应;增加了应变率的线性项描述拉伸加载时的应变率效应;利用实验数据拟合了修 改后的RJC模型参数,最终较好描述了无氧铜试样环的膨胀变形过程。     

岩石非弹性特性的内时理论模型

针对岩石的非弹性特性,将内时理论引入到岩石特性的研究中来。首先对内时理论的方程作了简要推导和说明。将核函数作四阶的Prony展开,将积分方程用一组微分方程来代替,最后得出可以进行数值运算的内时方程。在MTS压机上进行了砂岩、花岗岩等不同岩石样品的多种循环加卸载实验,得到一系列应力—应变曲线。根据滞回曲线的拐点,用最小二乘拟合法来具体确定内时方程中的有关参数。将理论产生的各种滞回曲线与实验滞回曲线作比较,可以看出在滞回曲线和残余应变这二个岩石非弹性特性最明显的标志上,非常一致。说明在中等应变强度时,利用内时理论可以对岩石非弹性特性作很好的研究。与塑性理论比较,可以免去确定屈服面的困难。最后对岩石滞回特性的微观机制用P-M模型作了简要讨论和分析。     

基于Bragg光纤光栅的位移-应变传感器分析

光纤光栅传感器技术应用于力学测试是国内外正在发展的一门新技术.本文基于光纤光栅传感的基本原理,介绍了一种用于位移测量的应变传感器,测得应变与位移变化具有良好的线性特点,重复性好;对该传感器的测量过程进行了有限元模拟,并与实验值进行了比较.     

基于光纤光栅技术的船体变形修正技术

为进一步优化航天测量船变形测量系统,提出了基于光纤Bragg光栅技术的应变误差测量方法。首先通过对测量船变形系统的结构和光路进行几何分析,建立了应变量与误差角之间的转换模型。然后基于光纤光栅技术设计了测量船变形系统的应变误差测量方案。由应变与误差角的转换公式得到,运用常用的Si425型光纤光栅解调仪,其理论测量精度可达0.01″。     

基于SHPB装置的膨胀圆柱管实验技术

采用改进的SHPB实验装置对45钢薄壁金属圆柱管进行了膨胀断裂加载,完成了不同变形程度 (覆盖圆柱管整个变形及断裂过程)圆柱管的冻结回收实验。回收样品可用于断裂机理研究分析,通过数值模 拟辅助分析和实验数据拟合得到了圆柱管凸起处的径向应变、应变率和环向拉伸应力。通过在圆柱管端粘贴 应变片监测断裂信号的方式,准确判断了圆柱管凸起处发生断裂的时间,以及径向断裂应变、应变率和环向拉 伸断裂应力,在102~104s-1应变率范围内,SHPB实验装置可用于研究金属圆柱管膨胀断裂。     

煤系地层岩石渗透特性试验研究

基于MTS815.02型岩石伺服渗透试验系统,应用两种实验方法测定了岩石的渗透特性,给出煤系地层中多种岩石全应力-应变过程中渗透率变化范围,对几种岩石的渗透特征进行了分析和讨论。研究表明:1)煤系地层岩石全应力-应变过程的渗透率通常在10-9到10-4Darcy量级之间;2)不同岩石在应力峰值前后其渗透性呈现不同的变化趋势;3)岩石渗透率的离散性很大,即使在相同的试验条件下,渗透率变异系数大多在0.65以上,其离散性按粗砂岩、泥岩、砂质页岩、中砂岩、细砂岩、砾岩、石灰岩顺序逐渐增大;4)在MTS815.02系统上,当所测岩样渗透率小于10-4Darcy量级时,应采用瞬态法,当渗透率量级大于10-4Darcy时,可改用稳态法测定。岩石变形过程中应力场和渗流场的耦合作用十分复杂,渗透率受孔隙压力、围压、试件尺寸、饱和程度等因素影响。     

巴西圆盘泥岩试件裂纹扩展及应变演化实验研究

为了研究准静态加载条件下岩石试件巴西劈裂裂纹扩展规律,采用MTS试验机进行准静态加载,同时用高速摄像机记录裂纹扩展过程。采用白光数字散斑处理软件对摄像机记录的照片进行处理,得到试件裂纹扩展过程中应变场的演化情况。通过实验和分析可以看出,由于端部效应及加载方式的原因,因此裂纹起裂点在底部加载部位;泥岩试件表面裂纹的平均扩展速度为252m/s;岩石的非均质性即内部微缺陷、微裂纹使得泥岩试样的开裂并不是沿着中心直径方向,而是偏离一定的角度,初始偏离角度约为17°。裂纹扩展过程可以划分为三个阶段:泥岩试件宏观变形阶段(宏观无裂纹)、宏观裂纹稳定扩展阶段、宏观裂纹动态张裂阶段。同时,在裂纹扩展过程中,表面第一主应变场、水平位移场等变化明显,在开裂部位第一主应变最大。通过对圆盘泥岩试件裂纹扩展实验研究,可为研究岩石破裂及其演化规律提供依据。     

一种新的岩石非线性黏弹塑性蠕变模型研究

为了克服传统元件组合模型不能描述岩石蠕变过程中非线性特征的缺陷，首先根据加速蠕变阶段的应变和应变率随蠕变时间急剧增大的特点，建立黏塑性应变与蠕变时间的指数函数关系并提出非线性黏塑性体．将该非线性黏塑性体与广义Burgers蠕变模型串联，建立可以描述岩石全蠕变过程的非线性黏弹塑性蠕变模型，根据叠加原理得到一维应力状态下的轴向蠕变方程．然后基于塑性力学理论指出岩石三维蠕变本构方程建立过程中的不足之处，并给出非线性黏弹塑性蠕变模型合理的三维蠕变方程．最后采用不同应力水平下砂岩轴向蠕变试验对模型合理性进行验证，结果表明：拟合曲线与试验曲线吻合度较高，所建蠕变模型能够很好地描述砂岩在不同应力水平下的蠕变变形规律，尤其对加速蠕变阶段的非线性特征描述效果很好，验证了模型的合理性．     

Torsion measurement using fiber Bragg grating sensors

In this paper, the authors study the potential of using fiber Bragg grating (FBG) strain sensors to measure the torsion deformation theoretically and experimentally. FBG sensors are bonded on the surface of a shaft. When the shaft is under torsion, there is strain induced in the FBG sensor and the Bragg wavelength will shift accordingly. According to the wavelength shift and photoelastic properties of the FBG sensor bonded to the shaft, the torsion deformation of the shaft can be obtained. To minimize the measurement error, the optimal direction of the FBG sensor is obtained. The influences of the orientation deviation of the FBG sensor are discussed. The feasibility of this method is demonstrated by experiment, and the test results agree well with the theoretical analysis.     

聚氨酯(PU)在力学性能测试中的摩擦效应与变形均匀性研究

作为防弹玻璃夹层材料,PU的动态力学性能一直受到学者们的关注。为准确表征其动态力学性能,本文采用ABAQUS有限元软件对不同摩擦系数下的单轴压缩试验进行数值仿真,分析试样加载端面的摩擦效应和几何尺寸对单轴压缩试验结果的影响;结合高速摄影技术(HSP)与数字图像相关技术(DIC)观测到试样在拉伸试验中的动态变形场和应变场,探讨标距段的应力均衡性;同时对PU材料在不同应变率下的单轴压缩、拉伸力学性能进行测试。结果表明:压缩试样的端面摩擦效应限制横向变形,影响了试样内部的受力分布,使得测量得到的应力值偏大;试样长径比越小,端面摩擦效应的影响越大;在单轴动态拉伸试验中,板状拉伸试样的标距段选取应当考虑两端倒角尺寸。通过测试PU的拉、压力学性能,发现材料具有显著的应变率敏感性。     

Multi-Functional Measurement Using a Single FBG Sensor

This paper describes the measurement of average strain, strain distribution and vibration of a cantilever beam made of Carbon Fiber Reinforced Plastics (CFRP), using a single Fibre Bragg Grating (FBG) sensor mounted on the beam surface. Average strain is determined from the displacement of the peak wavelength of reflected spectrum from the FBG sensor. Two unstrained reference FBG sensors were used to compensate for temperature drift. Measured strains agree with those measured by a resistance foil strain gauge attached to the sample. Stress distributions are measured by monitoring the variation in the full width at half maximum (FWHM) values of the reflected spectrum, using a proposed optical analytical model, described in the paper. FWHM values were measured for both the cantilever test beam and for a reference beam, loaded using a four-point bending rig. The trend of the stress distribution for the test beam matches with our analytical model, however with a relatively large noise present in the experimentally determined data. The vibration of a cantilever beam was measured by temporal analysis of the peak reflection wavelength. This technique is very stable as measurements are not affected by variations in the signal amplitude. Finally an application of FBG sensors for damage detection of CFRP plates, by measuring the natural frequency, is demonstrated. With small defects of different sizes applied to the CFRP plate, the natural frequency decreased with damage size.     

分布式光纤传感测试系统(BOTDA)用于H型钢梁变形监测的实验研究

介绍了分布式光纤传感测试系统(BOTDA)的应变测量原理,并应用BOTDA技术对H型钢梁加载后的应变分布进行了测量。试验表明,BOTDA的应变测量结果与电阻应变片的测量结果及理论值具有良好的一致性。光纤测量的数据是连续的,因而更加适用于那些需要测试连续变形的结构。由BOTDA的实测应变分布推算出的H型钢梁的弯矩和挠度,与理论分析结果高度吻合。作为先进的监测技术手段,分布式光纤传感测试系统应用于SMW工法桩施工监测是完全可行的。     

Incorporation of yield surface distortion in finite deformation constitutive modeling of rigid-plastic hardening materials based on the Hencky logarithmic strain

In this paper a constitutive model for rigid-plastic hardening materials based on the Hencky logarithmic strain tensor and its corotational rates is introduced. The distortional hardening is incorporated in the model using a distortional yield function. The flow rule of this model relates the corotational rate of the logarithmic strain to the difference of the Cauchy stress and the back stress tensors employing deformation-induced anisotropy tensor. Based on the Armstrong–Fredrick evolution equation the kinematic hardening constitutive equation of the proposed model expresses the corotational rate of the back stress tensor in terms of the same corotational rate of the logarithmic strain. Using logarithmic, Green–Naghdi and Jaumann corotational rates in the proposed constitutive model, the Cauchy and back stress tensors as well as subsequent yield surfaces are determined for rigid-plastic kinematic, isotropic and distortional hardening materials in the simple shear deformation. The ability of the model to properly represent the sign and magnitude of the normal stress in the simple shear deformation as well as the flattening of yield surface at the loading point and its orientation towards the loading direction are investigated. It is shown that among the different cases of using corotational rates and plastic deformation parameters in the constitutive equations, the results of the model based on the logarithmic rate and accumulated logarithmic strain are in good agreement with anticipated response of the simple shear deformation.     

室内模型实验中低强度桩侧应变片粘贴技术与应用

表面粗糙的桩与桩间土共同受力后发生相对位移,在低强度桩侧面有效粘贴应变片以测试轴力传递规律是一个难点.在组合群桩复合地基室内模型试验中,本文结合传统内贴法和外贴法两种贴片方式的优点,提出并采用凹槽法在低强度实心模型桩外侧面贴片,即在桩侧预留凹槽、用环氧树脂对贴片部位进行表层处理,在贴片后密封凹槽,并给出了典型测试结果.分析认为:凹槽法贴片技术有效可行,可供室内含桩地基基础模型试验借鉴.     

Modelling inelastic behaviour of orthotropic metals in a unique alignment of deviatoric plane within the stress space

A finite strain constitutive model to predict the deformation behaviour of orthotropic metals is developed in this paper. The important features of this constitutive model are the multiplicative decomposition of the deformation gradient and a new Mandel stress tensor combined with the new stress tensor decomposition generalized into deviatoric and spherical parts. The elastic free energy function and the yield function are defined within an invariant theory by means of the structural tensors. The Hill’s yield criterion is adopted to characterize plastic orthotropy, and the thermally micromechanical-based model, Mechanical Threshold Model (MTS) is used as a referential curve to control the yield surface expansion using an isotropic plastic hardening assumption. The model complexity is further extended by coupling the formulation with the shock equation of state (EOS). The proposed formulation is integrated in the isoclinic configuration and allows for a unique treatment for elastic and plastic anisotropy. The effects of elastic anisotropy are taken into account through the stress tensor decomposition and plastic anisotropy through yield surface defined in the generalized deviatoric plane perpendicular to the generalized pressure. The proposed formulation of this work is implemented into the Lawrence Livermore National Laboratory-DYNA3D code by the modification of several subroutines in the code. The capability of the new constitutive model to capture strain rate and temperature sensitivity is then validated. The final part of this process is a comparison of the results generated by the proposed constitutive model against the available experimental data from both the Plate Impact test and Taylor Cylinder Impact test. A good agreement between experimental and simulation is obtained in each test.     

基于准分布式FBG传感器的均质材料内部应变测试的试验研究

采用环氧树脂材料作为试验载体,使用没有任何保护性封装的、运用波分复用技术在同一光纤上刻入三个布拉格光栅的基础FBG传感器,来监测液体树脂流动及固化成型的全过程,并使用固化成型的环氧树脂板进行三点弯曲试验。将所得数据与有限元模拟数值解进行比较,来验证在去除封装、将传感器自身应变影响降到最低的情况下,FBG传感网络是否依然能够有效地反映出试验对象在各种情况下的内部应变。本文给出了FBG光纤光栅在逐级静力荷载加载下材料内部三点弯曲的应变图,并通过数值计算分析了未封装光纤在复合材料内部受力过程中的力学性能。     

滑轨导向式静/动态双轴拉伸实验技术

基于液压伺服高速加载系统,发展了一种材料双轴拉伸力学性能测试技术。利用锥面接触导向驱动方法,把加载锤竖直方向的驱动力转化为水平方向的双轴驱动力,从而实现对十字形试样平面双轴加载。借助有限元数值模拟手段优化了锥面接触角和十字形试样尺寸。当接触锥角为45°时,既有较好的水平驱动转化效率,同时又保持较小的接触力,确保水平驱动加载各组件在弹性变形范围内,可多次重复使用。确定了加载臂狭缝个数、狭缝与减薄区边缘长度和标距段厚度等试样设计关键参数,在十字形试样测试标距段内实现了均匀变形。设计了测力夹持一体化导杆和非接触光学全场应变测试系统,准确获得了试样的应力和应变。利用此平面双轴拉伸加载装置,开展2024-T351铝合金板单轴拉伸实验和激光探测同步性验证实验,验证装置设计的可行性;开展铝合金板材在不同加载速率下的双轴拉伸实验,得到在双轴加载下铝合金板材应力应变曲线,并与单轴加载下实验结果进行了对比分析。     

A modified damage model for advanced high strength steel sheets

More often than not, better formability in the simple tension test implies better formability performance in other stretching modes, especially in hole expansion performance since deformation in the hole expansion test is perceived to be in the same simple tension deformation mode. However, when the hole expansion formability is evaluated particularly for the twinning induced plasticity (TWIP) steel, its performance is so poor compared to other automotive steels, even though the TWIP steel has significantly superior formability in the simple tension test. Therefore, hole expansion formability was experimentally and numerically studied for advanced high-strength grade steel sheets, TWIP940 and a transformation induced plasticity (TRIP) 590 steel sheet, as well as a high-strength grade 340R steel sheet, particularly in conjunction with formability in the simple tension test and its surface condition sensitivity. In order to characterize mechanical properties, simple tension tests were performed to determine anisotropic properties and strain rate sensitivities. To account for macro-crack formation, an inverse calibration method based on a damage model utilizing a triaxiality-dependent fracture criterion and hardening behavior with stiffness deterioration was developed. In this approach, the damage model was inversely calibrated by performing numerical simulations and experiments for the simple tension test (with specimens prepared by milling and punching). Then, the damage model was applied to formability study in the hole expansion test. The damage model along with the anisotropic yield function Hill (1948) incorporated into the ABAQUS/Explicit FEM code performed well to predict hole expansion ratios (HER) and their surface condition sensitivity, elucidating the cause of the lukewarm hole expansion performance and strong surface condition sensitivity of the TWIP steel compared to the others.