一维六方准晶压电材料中唇形裂纹反平面问题的解析解

本文在准晶压电材料基本方程的基础上,根据点群的对称性和一维六方准晶的线性压电效应,导出了一维六方准晶压电材料反平面问题的控制方程.利用复变函数的方法,通过引入适当的保角映射,研究了准晶压电材料中唇形裂纹的反平面问题,并利用Cauchy积分理论,得到在电不可通边界条件下的裂纹尖端场强度因子与机械应变能释放率的解析表达式.     

一维六方压电准晶对称条形体中共线双半无限快速传播裂纹的解析解

利用复变函数方法, 通过构造保角映射, 分析了一维六方压电准晶中对称条形体中共线双半无限快速传播裂纹的反平面问题, 给出了在电非渗透型与电渗透型两种情况下动态应力强度因子的解析解. 当速度趋于0时可退化为已有的对应的静力问题的解. 得到的解析解对准晶材料的工程应用中有一定的理论价值.     

一维六方压电准晶中唇形匀速移动裂纹问题的解析解

运用复变函数方法,通过构造保角映射,研究了在电非渗透型边界条件下一维六方压电准晶中唇形快速传播裂纹问题的反平面剪切问题,获得了III型裂纹动态的应力强度因子和电位移强度因子的解析解．研究结果表示,当裂纹传播速度趋于零时,动力学问题就还原为了静力学问题的解．当唇形裂纹的高度趋于零时,所得结果可以退化为Griffth裂纹问题．     

一维六方准晶压电材料反平面Ⅲ型裂纹电塑性分析

论文基于一维六方准晶压电材料反平面问题的基本方程,对Ⅲ型裂纹的电塑性区进行分析.采用条带模型并假设在电塑性区的切应力保持为常数,得到了电塑性区大小的表达式.这种假设方式消除了电场和应力在裂纹尖端的奇异性,这与实际情况相符合,也为一维六方准晶压电材料的断裂分析提供了理论基础.     

Elastic field in an infinite medium of one-dimensional hexagonal quasicrystal with a planar crack

This present work is concerned with planar cracks embedded in an infinite space of one-dimensional hexagonal quasicrystals. The potential theory method together with the general solutions is used to develop the framework of solving the crack problems in question. The mode I problems of three common planar cracks (a penny-shaped crack, an external circular crack and a half-infinite crack) are solved in a systematic manner. The phonon and phason elastic fundamental fields along with some important parameters in crack analysis are explicitly presented in terms of elementary functions. Several examples are given to show the applications of the present fundamental solutions. The validity of the present solutions is discussed both analytically and numerically. The derived analytical solutions of crack will not only play an important role in understanding the phonon–phason coupling behavior in quasicrystals, but also serve as benchmarks for future numerical studies and simplified analyses.     

一维六方准晶中星形静态裂纹和运动裂纹的解析解

利用复变函数方法研究了一维六方准晶中星形静态裂纹和运动裂纹的反平面剪切问题,得到了星形裂纹尖端处应力强度因子和动应力强度因子的解析解.当裂纹条数给定时,由此可得到直线裂纹,Griffith裂纹,共点均匀分布三裂纹,对称十字形裂纹,米字型裂纹(对称八裂纹)静力学和动力学问题的解析解.当k=4时,用数值算例讨论了声子场-相位子场耦合系数和裂纹运动速度对动应力强度因子的影响.当速度趋于0时,运动裂纹的解可以退化为静态裂纹的解.     

Closed form solution for two unequal collinear semi-permeable straight cracks in a piezoelectric media

The problem of two unequal collinear straight cracks weakening a poled transversely isotropic piezoelectric ceramic is addressed under semi-permeable electric boundary conditions on the crack faces. The plate has been subjected to combined in-plane normal(to the faces of the cracks) mechanical and electric loads. Problem is formulated employing Stroh formalism and solved using complex variable technique. The elastic field, electric field and energy release rate are obtained in closed analytic form. A case study is presented for poled PZT-5H cracked plate to study the effect of prescribed mechanical load, electric load, inter-crack distance and crack lengths on crack arrest parameters stress intensity factor (SIF), electric displacement intensity factor (EDIF) and mechanical and total energy release rates (ERR). Moreover a comparative study is done of impermeable and semi-permeable crack face boundary conditions on SIF, EDIF and ERR, and results obtained is presented graphically. It is observed that the effect of dielectric medium in the crack gap cannot be ignored.     

带双裂纹的椭圆孔口问题的应力分析

利用复变方法,通过构造新的保角映射,研究了带双裂纹椭圆孔口的平面弹性问 题,得到了I型与II型裂纹问题应力强度因子的解析解.在极限情形下, 不仅可以还原经典的Griffith裂纹的结果,而且可模拟出十字裂纹和带双裂纹的圆 形孔口问题.     

一维正方准晶椭圆孔口平面弹性问题的解析解

利用复变方法,引入广义保角映射,研究了一维正方准晶中具有椭圆孔口的平面弹性问题,给出了各应力分量的复变表示,并在特殊情况下转化为Griffith裂纹,得到该裂纹尖端处的应力强度因子的解析解.当准晶体的对称性增加时,正方准晶椭圆孔口平面弹性问题退化为一维四方准晶中具有椭圆孔口的平面弹性问题,同样在特殊情况下转化为Griffith裂纹,得到裂纹尖端处的应力强度因子的解析解.     

CRACK TIP PLASTICITY OF A THERMALLY LOADED PENNY-SHAPED CRACK IN AN INFINITE SPACE OF 1D QC

The present work is concerned with a penny-shaped Dugdale crack embedded in an infinite space of one-dimensional(1D) hexagonal quasicrystals and subjected to two identical axisymmetric temperature loadings on the upper and lower crack surfaces. Applying Dugdale hypothesis to thermo-elastic results, the extent of the plastic zone at the crack tip is determined.The normal stress outside the plastic zone and crack surface displacement are derived in terms of special functions. For a uniform loading case, the corresponding results are presented by simplifying the preceding results. Numerical calculations are carried out to show the influence of some parameters.     

准晶数学弹性力学和缺陷力学

对准晶数学弹性理论的基本概念和基本框架作了介绍,在此基础上分别针对目前已经发现的几类一维准晶、二维准晶和三维准晶讨论了其数学弹性的理论体系．为了求解准晶弹性的边值问题或初值一边值问题,还必须发展相应的方法论．物理工作者在研究准晶位错弹性问题中发展了Ｇｒｅｅｎ函数方法．针对一维与二维准晶弹性中几类问题提出了分解与叠加程序,这一程序的使用,使极其复杂的准晶弹性问题得到简化,进而引进位移函数或应力函数,把数目。庞大的准晶弹性基本方程化成一个或少数几个高阶偏微分方程,进一步使求解步骤大为简化．对三维立方准晶弹性也采用了类似步骤使求解过程大为简化．在以上化简的基础上,发展了准晶弹性的边值问题或初值一边值问题的复交函数方法和 Ｆｏｕｒｉｅｒ分析方法,求得了一系列准晶位错问题和裂纹问题的分析解（古典解）．在研究准晶弹性的边值问题古典解的同时,也讨论了同这些边值问题相对应的变分问题和广义解（弱解）以及这种弱解的数值方法──有限元法．在物理学家工作基础上开展的这些工作可以看作对经典数学弹性理论和方法、经典Ｖｏｌｔｅｒｒａ位错理论、普通结构材料断裂力学和经典有限元的某些发展．此外,还把一维六方准晶弹性动力学的结果与统计物理的某些     

带裂纹的椭圆孔口问题的应力分析

断裂现象与材料和结构中的孔洞、缺口或裂纹等缺陷密切相关,这是因为缺陷附近的应力集中明显.该文利用复变方法,通过保角映射研究了带裂纹的椭圆孔洞的平面弹性问题,给出了应力强度因子的解析解.并由此计算了两互相垂直的裂纹问题.     

BIEM analysis of dynamically loaded anti-plane cracks in graded piezoelectric finite solids

Anti-plane cracks in finite functionally graded piezoelectric solids under time-harmonic loading are studied via a non-hypersingular traction based boundary integral equation method (BIEM). The formulation allows for a quadratic variation of the material properties in two directions. The boundary integral equation (BIE) system is treated by using the frequency dependent fundamental solution based on Radon transforms. Its numerical solution provides the displacements and tractions on the external boundary as well as the crack opening displacements from which the mechanical stress intensity factor (SIF) and the electrical displacement intensity factor (EDIF) are determined. Several examples for single and multiple straight and curved cracks demonstrate the applicability of the method and show the influence of the different system parameters.     

First order Oore–Burns integral for nearly circular cracks under uniform tensile loading

In this paper, by means of the Oore–Burns weight function, we have obtained a general explicit equation for the Stress Intensity Factors (SIFs) of a nearly circular internal crack subjected to remotely uniform tensile stress. We have expanded the crack border in Fourier series and have derived an analytic solution for the SIF at any point on the front crack, in terms of the homotopic transformation of a disk. More precisely, we have given the first order approximation of the SIF in closed form. From a theoretical point of view, the proposed equation can only be used for a small deviation from the circle, however some tests on elliptical cracks have shown that the equation also works well for slender ellipses (up to a ratio of 0.4 between the two semi-axes). Finally, as an example, we have given a suitable explicit formula for SIF derived from general equations for triangular cracks and square-like cracks.     

一维六方准晶中平行螺型位错与有限长裂纹的相互作用

本文采用解析函数理论,利用Muskhelishvili著名的复变函数方法,给出了无限大一维六方准晶中多条平行螺型位错与有限长直裂纹相互作用的解析解,并得到了裂纹尖端的场强度因子和作用在位错上的像力.数值算例讨论了镜像力、场强度因子随位错位置的变化，及位错的位置与分布对广义应力场的影响．     

一维六方准晶中纳米尺度开裂孔洞的III型断裂力学

研究了一维六方准晶中纳米尺度开裂孔洞的Ⅲ型断裂力学问题。基于复变弹性理论和表面弹性理论获得了考虑表面效应时椭圆孔边裂纹的应力场、应力强度因子和能量释放率的解析表达；讨论了缺陷尺寸、裂纹/孔洞比、耦合系数和施加载荷对应力强度因子和能量释放率的影响。研究表明：考虑表面效应且缺陷的尺寸在纳米尺度时，声子场和相位子场的无量纲应力强度因子以及无量纲能量释放率具有明显的尺寸依赖；裂纹相对尺寸较小时，表面效应对声子场和相位子场的无量纲应力强度因子影响较小；纳米尺度时无量纲能量释放率随耦合系数的增加而增大；耦合系数一定时，无量纲能量释放率受到椭圆孔尺寸影响；随着声子场载荷的增大，无量纲能量释放率先减小后增加，最后趋于稳定；无量纲能量释放率随相位子场载荷的增大单调减小，非常小和非常大的声子场载荷(或相位子场载荷)屏蔽了相位子场载荷(或声子场载荷)的影响。     

一维六方准晶中纳米尺度开裂孔洞的III型断裂力学

研究了一维六方准晶中纳米尺度开裂孔洞的Ⅲ型断裂力学问题。基于复变弹性理论和表面弹性理论获得了考虑表面效应时椭圆孔边裂纹的应力场、应力强度因子和能量释放率的解析表达;讨论了缺陷尺寸、裂纹/孔洞比、耦合系数和施加载荷对应力强度因子和能量释放率的影响。研究表明：考虑表面效应且缺陷的尺寸在纳米尺度时,声子场和相位子场的无量纲应力强度因子以及无量纲能量释放率具有明显的尺寸依赖;裂纹相对尺寸较小时,表面效应对声子场和相位子场的无量纲应力强度因子影响较小;纳米尺度时无量纲能量释放率随耦合系数的增加而增大;耦合系数一定时,无量纲能量释放率受到椭圆孔尺寸影响;随着声子场载荷的增大,无量纲能量释放率先减小后增加,最后趋于稳定;无量纲能量释放率随相位子场载荷的增大单调减小,非常小和非常大的声子场载荷(或相位子场载荷)屏蔽了相位子场载荷(或声子场载荷)的影响。     

Exact solutions for anti-plane problem of two asymmetrical edge cracks emanating from an elliptical hole in a piezoelectric material

Based on the complex variable method and the technique of conformal mapping, the anti-plane problem of two asymmetrical edge cracks emanating from an elliptical hole in a piezoelectric material is studied. The exact solutions of field intensity factors and energy release rate are presented in closed-form with the assumption that the surfaces of the cracks and the elliptical hole are electrically impermeable. With the variation of the hole-size and the crack length, the present results can be reduced to the cases of two symmetrical edge cracks and a single edge crack emanating from a circular hole given by Wang and Gao [Wang, Y.J., Gao, C.F., 2008. The mode III cracks originating from the edge of a circular hole in a piezoelectric solid. International Journal of Solids and Structures 45, 4590–4599]. Moreover, new models used for simulating more practical defects in a piezoelectric solid are obtained, such as two symmetrical edge cracks and a single edge crack emanating from an elliptical hole, two asymmetrical edge cracks emanating from a circular hole, T-shaped crack, cross-shaped crack and semi-infinite plane with an edge crack. Numerical examples are then conducted to reveal the effects of the hole-size and the crack length on the field intensity factors and the energy release rate.     

估算裂纹应力强度因子的新方法

根据裂纹形状与裂纹尖端应力强度因子分布之间的固有关系，在线弹性断 裂力学条件下，提出了一种按已知I型裂纹应力强度因子分布规律求裂纹形状及相应应力强 度因子的无梯度迭代法. 通过有限厚度、有限宽度板穿透裂纹和表面裂纹的数值模拟实例验 证了所提出方法的有效性和实用性，并对不同应力强度因子分布规律对裂纹形状以及相应的 应力强度因子大小的影响进行了分析和讨论. 所提出的方法有助于提高实际扩展裂纹应 力强度因子的估算精度以及更合理地预测疲劳裂纹形状演化.     

A domain-independent integral for computation of stress intensity factors along three-dimensional crack fronts and edges by BEM

The present work deals with an evaluation of stress intensity factors (SIFs) along straight crack fronts and edges in three-dimensional isotropic elastic solids. A new numerical approach is developed for extraction, from a solution obtained by the boundary element method (BEM), of those SIFs, which are relevant for a failure assessment of mechanical components. In particular, the generalized SIFs associated to eigensolutions characterized by unbounded stresses at a neighbourhood of the crack front or a reentrant edge and also that associated to T-stress at the crack front can be extracted. The method introduced is based on a conservation integral, called H-integral, which leads to a new domain-independent integral represented by a scalar product of the SIF times some element shape function defined along the crack front or edge. For sufficiently small element lengths these weighted averages of SIFs give reasonable pointwise estimation of the SIFs. A proof of the domain integral independency, based on the bi-orthogonality of the classical two-dimensional eigensolutions associated to a corner problem, is presented. Numerical solutions of two three-dimensional problems, a crack problem and a reentrant edge problem, are presented, the accuracy and convergence of the new approach for SIF extraction being analysed.