On the stress state of a piezoceramic body with a flat crack under symmetric loads

A static-equilibrium problem is solved for an electroelastic transversely isotropic medium with a flat crack of arbitrary shape located in the plane of isotropy. The medium is subjected to symmetric mechanical and electric loads. A relationship is established between the stress intensity factor (SIF) and electric-displacement intensity factor (EDIF) for an infinite piezoceramic body and the SIF for a purely elastic material with a crack of the same shape. This allows us to find the SIF and EDIF for an electroelastic material directly from the corresponding elastic problem, not solving electroelastic problems. As an example, the SIF and EDIF are determined for an elliptical crack in a piezoceramic body assuming linear behavior of the stresses and the normal electric displacement on the crack surface __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 11, pp. 67–77, November 2005.     

Thermostressed state of a piezoelectric bodywith a plane crack under symmetric thermal load

The paper addresses a thermoelectroelastic problem for a piezoelectric body with an arbitrarily shaped plane crack in a plane perpendicular to the polarization axis under a symmetric thermal load. A relationship between the intensity factors for stress (SIF) and electric displacement (EDIF) in an infinite piezoceramic body with a crack under a thermal load and the SIF for a purely elastic body with a crack of the same shape under a mechanical load is established. This makes it possible to find the SIF and EDIF for an electroelastic material from the elastic solution without the need to solve specific problems of thermoelasticity. The SIF and EDIF for a piezoceramic body with an elliptic crack and linear distribution of temperature over the crack surface are found as an example __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 3, pp. 96–108, March 2008.     

Strip-electromechanical model solution for piezoelectric plate cut along two semi-permeable collinear cracks

A strip electric saturation and mechanical yielding model solution is proposed for a piezoelectric plate cut along two equal collinear semi-permeable mode-I cracks with electrical polarization reaching a saturation limit and normal stress reaching a yield stress along a line segment in front of the cracks. By using Stroh formalism and complex variable technique, we derived the analytical solution for the field quantities. Three different situations are investigated when developed electrical saturation zone is bigger/smaller or equal to the developed mechanical yield zone. Numerical results show that the effect of different electric boundary conditions on the crack opening displacement and crack opening potential drop is significant and should not be ignored. The influence of electric load displacement on the energy release rate is also investigated for PZT-4, PZT-5H and BaTiO₃ ceramics, and it may assists for the correct choosing of ceramic for specific job.     

A dielectric crack in a functionally graded piezoelectric layer

Considering the dielectric effects inside a crack, the problem of an electrically dielectric crack in a functionally graded piezoelectric layer is addressed in this paper. The energetically consistent crack-face boundary conditions are utilized to analyze the effects of a dielectric of crack interior. Applying the Fourier transform technique, the boundary-value problem is reduced to solving three coupling singular equations. Then a system of non-linear algebraic equations is obtained and the field intensity factors along with the energy release rate are given. Numerical results show the differences of the electric displacement inside a crack, the stress and electric displacement intensity factors and the energy release rate using the permeable, impermeable, semi-permeable and energetically consistent boundary conditions respectively. The effects of the material non-homogeneity, the applied electric field and the discharge field of crack interior on the electrostatic traction acting on the crack faces and the energy release rate are further studied through the energetically consistent boundary conditions.     

BIEM analysis of dynamically loaded anti-plane cracks in graded piezoelectric finite solids

Anti-plane cracks in finite functionally graded piezoelectric solids under time-harmonic loading are studied via a non-hypersingular traction based boundary integral equation method (BIEM). The formulation allows for a quadratic variation of the material properties in two directions. The boundary integral equation (BIE) system is treated by using the frequency dependent fundamental solution based on Radon transforms. Its numerical solution provides the displacements and tractions on the external boundary as well as the crack opening displacements from which the mechanical stress intensity factor (SIF) and the electrical displacement intensity factor (EDIF) are determined. Several examples for single and multiple straight and curved cracks demonstrate the applicability of the method and show the influence of the different system parameters.     

Why traction-free? Piezoelectric crack and Coulombic traction

The non-zero traction condition is introduced in piezoelectric crack problems with the unknown Coulombic traction acting on the crack surfaces. An analytical solution under this condition is obtained by means of the generalized Stroh formalism and by accounting for the permittivity of medium inside the crack gap. As the crack in such materials can be thought of as a low-capacitance medium carrying a potential drop, the Coulombic traction always pulls the two opposite surfaces of the crack together. It is proved that under relatively larger mechanical loading and relatively smaller electrical field, the Coulombic traction may be negligible and the previous investigations under the traction-free crack condition may be accepted in a tolerant way, otherwise the Coulombic traction may lead to some erroneous results with over 10% relative errors. It is also shown that, unlike the traction-free crack condition, the applied electric field does change the Mode I stress intensity factor (SIF) for a central crack in an infinite plane piezoelectric material, and in this way may significantly influence piezoelectric fracture. It is also concluded that the variable tendencies of the normalized SIF and the ERR against the applied electric field depend on the mechanical loading levels. This load-dependence feature may lead to a transformation of the normalized SIF and the ERR from an even functional dependence to an odd functional dependence on the applied electric field.     

压电体中考虑表面效应时开裂孔洞的断裂特征

研究了反平面机械载荷和面内电载荷作用下压电体中考虑表面效应时孔边双裂纹问题的断裂特征。基于Gurtin-Murdoch表面理论模型，通过构造映射函数，利用复势电弹理论获得了应力场和电位移场的闭合解答。给出了裂纹尖端应力强度因子、电位移场强因子和能量释放率的解析解。讨论了开裂孔洞几何参数和施加力电载荷对电弹场强因子和能量释放率的影响。     

Coupled solution for anisotropic piezoelectric materials with cracks

The coupled elastic and electric fields for anisotropic piezoelectric materials with electrically permeable cracks are analyzed by using Stroh formula in anisotropic elasticity. It is shown from the solution that the tangent component of the electric field strength and the normal component of the electric displacement along the faces of cracks are all constants, and the electric field intensity and electric displacement have the singularity of type (1/2) at the crack tip. The energy release rate for crack propagation depends on both the stress intensity factor and material constants. The electric field intensity and electric displacement inside electrically permeable cracks are all constants.     

电可通纳米尺度孔边均布多裂纹的电弹断裂分析

解析研究了面内电载荷和反平面机械载荷作用下压电体中纳米尺度圆孔边均布电可通多裂纹问题的断裂性能。基于Gurtin-Murdoch表面弹性理论,利用保角映射方法和复变弹性理论给出了裂纹尖端电弹场分布、电弹场强度因子及能量释放率的解析结果。阐述了无量纲电弹场强度因子、无量纲能量释放率的尺寸依赖效应,讨论了裂纹数量和缺陷几何参数对无量纲场强度因子和无量纲能量释放率的影响。结果表明：无量纲电弹场强度因子和无量纲能量释放率具有显著的尺寸依赖效应;考虑表面效应,孔径和裂纹长度相当时,电弹场强度因子达到最大;裂纹/孔径比对电弹场强度因子随裂纹数量变化的制约会随着裂纹数量的增加而逐渐消失;过大或过小的裂纹孔径比会削弱裂纹长度对能量释放率的影响。     

Generalized 2D problem of piezoelectric media containing collinear cracks

The generalized 2D problem in piezoelectric media with collinear cracks is addressed based on Stroh's formulation and the exact electric boundary conditions on the crack faces. Exact solutions are obtained, respectively, for two special cases: one is that a piezoelectric solid withN collinear cracks is subjected to uniform loads at infinity, and the other is that a piezoelectric solid containing a single crack is subjected to a line load at an arbitrary point. It is shown when uniform loads are applied at infinity or on the crack faces that, the stress intensity factors are the same as those of isotropic materials, while the intensity factor of electric displacement is dependent on the material constants and the applied mechanical loads, but not on the applied electric loads. Moreover, it is found that the electric field inside any crack is not equal to zero, which is related to the material properties and applied mechanical-electric loads. The project supported by the National Natural Science Foundation of China (19772004)     

电可通纳米尺度孔边均布多裂纹的电弹断裂分析

解析研究了面内电载荷和反平面机械载荷作用下压电体中纳米尺度圆孔边均布电可通多裂纹问题的断裂性能。基于Gurtin-Murdoch表面弹性理论，利用保角映射方法和复变弹性理论给出了裂纹尖端电弹场分布、电弹场强度因子及能量释放率的解析结果。阐述了无量纲电弹场强度因子、无量纲能量释放率的尺寸依赖效应，讨论了裂纹数量和缺陷几何参数对无量纲场强度因子和无量纲能量释放率的影响。结果表明：无量纲电弹场强度因子和无量纲能量释放率具有显著的尺寸依赖效应；考虑表面效应，孔径和裂纹长度相当时，电弹场强度因子达到最大；裂纹/孔径比对电弹场强度因子随裂纹数量变化的制约会随着裂纹数量的增加而逐渐消失；过大或过小的裂纹孔径比会削弱裂纹长度对能量释放率的影响。     

各向异性压电材料平面裂纹的耦合场分析

用Stroh方法分析了各向异性压电材料电导通型裂纹问题的耦合场。结果表明,裂纹面上的切向电场强度和法向电位移均为常数,在裂纹尖端有由弹性场的耦事作用产生的奇异电导通裂纹模型中的静电场对裂纹尖端扩展的能量释放率不作贡献。     

Fracture of magnetoelectroelastic composite materials using boundary element method (BEM)

The behavior of cracked linear magnetoelectroelastic solids is analysed by means of the dual Boundary Element Method (BEM) approach. Media possessing fully coupled piezoelectric, piezomagnetic and magnetoelectric effects are considered. An explicit 2-D Green’s function in terms of the extended Stroh formalism for magnetoelectroelastic full-plane under static loading is implemented. Hypersingular integrals arising in the traction boundary integral equations are computed through a regularization technique. Evaluation of fracture parameters directly from computed nodal values is discussed. The stress intensity factors (SIF), the electric displacement intensity factor (EDIF), the magnetic induction intensity factor (MIIF) as well as the mechanical strain energy release rate (MSERR) are evaluated for different crack configurations in both finite and infinite solids subjected to in-plane combined magnetic–electric–mechanical loading conditions. The accuracy of the boundary element solution is confirmed by comparison with selected analytical solutions in the literature. The new results that can be of interest in the design and maintenance of novel magnetoelectroelastic devices are also discussed.     

An exact solution of crack problems in piezoelectric materials

IntroductionInrecentyearscrackproblemsinpiezoelectricmaterialhavereceivedmuchattention.Manytheoreticalanalyseshavebeengivenby[1～16].Itshouldbe,however,notedthatalltheaboveanalysesarebasedonaso-calledimpermeablecrackassumphon,i.e.thecrackfacesareassumedtobeimpermeabletoelectricfield,sotheelectricdisplacementvanishesinsidethecrack.Usingthisassumption,onewillobtainthefollowingresultS[2'3'5,6'9'16]=whentheelectricloadsaresolelyaPPliedatinLfinity,theelectricdisplacementissquare-rootsingularatthe…     

Some new aspects of boundary conditions at cracks in piezoelectrics

Fracture mechanical investigations of piezoelectric materials as components of smart structures have become popular in the last 30?years. In the early years of research, boundary conditions at crack faces have been adopted from pure mechanical systems under the assumption that boundaries were traction free. From the electrostatic point of view, cracks have been assumed to be either free of charge or fully permeable. Later, limitedly permeable crack boundary conditions have become popular among the community, nevertheless still assuming traction-free crack faces. Recently, the theoretical framework has been extended to include electrostatically induced mechanical tractions in crack models yielding a significant crack closure effect. However, these models are still simple, neglecting, e.g., the piezoelectric field coupling. In this work, we present an extended model for crack surface tractions yielding some interesting effects. In particular, the orientation of the electrical field with respect to the poling axis becomes important. Furthermore, applying a collinear stress parallel to the crack faces influences the Mode-I stress intensity factor and a Mode-II shear loading couples to the Mode-I SIF.     

An I-integral method for crack-tip intensity factor variation due to domain switching in ferroelectric single-crystals

In the present study, an I-integral method is established for solving the crack-tip intensity factors of ferroelectric single-crystals. The I-integral combined with the phase field model is successfully used to investigate crack-tip intensity factor variations due to domain switching in ferroelectricity subjected to electromechanical loadings, which exhibits several advantages over previous methods based on small-scale switching. First, the shape of the switching zone around a crack tip is predicted by the time-dependent Ginzburg–Landau equation, which does not require preset energy-based switching criterion. Second, the I-integral can directly solve the crack-tip intensity factors and decouple the crack-tip intensity factors of different modes based on superimposing an auxiliary state onto an actual state. Third, the I-integral is area-independent, namely, the I-integral is not affected by the integral area size, the polarization distributions, or domain walls. This makes the I-integral applicable to large-scale domain switching. To this end, the electro-elastic field intensity factors of an impermeable crack in PbTiO₃ ferroelectric single crystals are evaluated under electrical, mechanical, and combined loading. The intensity factors obtained by the I-integral agree well with those obtained by the extrapolation technique. From numerical results, the following conclusions can be drawn with respect to fracture behavior of ferroelectrics under large-scale switching. Under displacement controlled mechanical loading, the stress intensity factors (SIFs) decrease monotonically due to the domain switching process, which means a crack tip shielding or effective switching-induced toughening occurs. If an external electric field is applied, the electric displacement intensity factor (EDIF) increases in all cases, i.e., the formed domain patterns enhance the electric crack tip loading. The energy release rate, expressed by the crack-tip J-integral, is reduced by the domain switching in all examples, which underlines the switching-induced-toughening effect. In contrast, under stress controlled load, the SIF evolves due to large-scale switching to a stable value, which is higher than the non-switching initial value, i.e., fracture is promoted in this case.     

Antiplane mechanical and inplane electric time-dependent load applied to two coplanar cracks in piezoelectric ceramic material

This work is concerned with the dynamic response of two coplanar cracks in a piezoelectric ceramic under antiplane mechanical and inplane electric time-dependent load. The cracks are assumed to act either as an insulator or as a conductor. Laplace and Fourier transforms are used to reduce the mixed boundary value problems to Cauchy-type singular integral equations in Laplace transform domain. A numerical Laplace inversion algorithm is used to determine the dynamic stress and electric displacement factors that depend on time and geometry. A normalized equivalent parameter describing the ratio of the equivalent magnitude of electric load to that of mechanical load is introduced in the numerical computation of the dynamic stress intensity factor (DSIF) which has a similar trend as that for the pure elastic material. The results show that the dynamic electric field will impede or enhance crack propagation in a piezoelectric ceramic material at different stages of the dynamic electromechanical load. Moreover, the electromechanical response is greatly affected by the ratio of the crack length to the ligament between the cracks. The stress and electric displacement intensity factor can be combined by the energy density factor or function to address the fracture of piezoelectric materials under the combined influence of electromechanical loading.     

压电效应下一维六方准晶双材料孔边裂纹的反平面问题研究

利用复变函数方法和保角变换技术研究了压电效应下一维六方准晶双材料中圆孔边单裂纹的反平面问题．考虑电不可渗透型边界条件,运用保角变换和Stroh公式得到了弹性体受远场剪切力和面内电载荷作用下裂纹尖端应力强度因子和能量释放率的解析解. 数值算例分析了几何参数、远场受力、电位移载荷对能量释放率的影响．结果表明：裂纹长度、耦合系数和远场剪切力的减小可以抑制裂纹的扩展．不考虑电场时,声子场应力对能量释放率的影响较小．本文的研究结果可作为研究一维六方压电准晶双材料孔边裂纹问题的理论基础,同时为压电准晶及其复合材料的设计、制备、优化和性能评估提供理论依据．     

压电压磁复合材料中正六边形孔边裂纹的反平面断裂问题

基于线性磁电弹性理论,利用Schwarz-Christoffel(CS)变换技术和Stroth公式,首次系统研究了压电压磁复合材料中含带两个不对称裂纹的正六边形孔口问题在部分渗透磁电边界条件下的解析解.当忽略磁场时,磁电非渗透裂纹和磁电渗透裂纹两种极端情况下的解析解答可退化为文献已有研究结果.数值结果揭示了正六边形孔口尺寸、裂纹长度以及力电载荷和磁载荷对能量释放率的影响规律.研究结果表明：减小孔口边长和裂纹长度可以提高材料的可靠性;机械载荷总是促进裂纹扩展;在磁电非渗透和磁电部分渗透边界条件下,负电场和负磁场会延缓裂纹的扩展,而正电场可以增强或阻碍裂纹的扩展,这取决于所施加的电场和磁场的强度以及机械载荷的水平;在磁电渗透边界条件下,电场和磁场对裂纹的扩展没有影响.     

Fracture analysis of circular-arc interface cracks in piezoelectric materials

The anti-plane problem of N arc-shaped interfacial cracks between a circular piezoelectric inhomogeneity and an infinite piezoelectric matrix is investigated by means of the complex variable method. Cracks are assumed to be permeable and then explicit expressions are presented, respectively, for the electric field on the crack faces, the complex potentials in media and the intensity factors near the crack-tips. As examples, the corresponding solutions are obtained for a piezoelectric bimaterial system with one or two permeable arc-shaped interfacial cracks, respectively. Additionally, the solutions for the cases of impermeable cracks also are given by treating an impermeable crack as a particular case of a permeable crack. It is shown that for the case of permeable interfacial cracks, the electric field is jumpy ahead of the crack tips, and its intensity factor is always dependent on that of stress. Moreover all the field singularities are dependent not only on the applied mechanical load, but also on the applied electric load. However, for the case of a homogeneous material with permeable cracks, all the singular factors are related only to the applied stresses and material constants.