复合材料层合壳有限元分析的预测-修正法

对于复合材料层合壳的有限元分析，本文根据Reissner-Mindlin型的全局位移场给出了一个预测一修正法。首先按照一般的有限元分析过程(没有引入剪切修正系数)计算出全局响应(如挠度，频率和屈曲载荷等)的预测值；然后利用Lagrange插值构造横向剪应力的一般形式，使得满足层间连续和表面上为零的条件，通过最小二乘法拟合三维应力平衡方程获得横向剪应力；最后在单元上计算和引入剪切修正系数，再经过有限元分析计算出全局响应的修正值。     

Corotational nonlinear analyses of laminated shell structures using a 4-node quadrilateral flat shell element with drilling stiffness

A new 4-node quadrilateral flat shell element is developed for geometrically nonlinear analyses of thin and moderately thick laminated shell structures. The fiat shell element is constructed by combining a quadrilateral area co- ordinate method （QAC） based membrane element AGQ6- II, and a Timoshenko beam function （TBF） method based shear deformable plate bending element ARS-Q12. In order to model folded plates and connect with beam elements, the drilling stiffness is added to the element stiffness matrix based on the mixed variational principle. The transverse shear rigidity matrix, based on the first-order shear deformation theory （FSDT）, for the laminated composite plate is evaluated using the transverse equilibrium conditions, while the shear correction factors are not needed. The conventional TBF methods are also modified to efficiently calculate the element stiffness for laminate. The new shell element is extended to large deflection and post-buckling analyses of isotropic and laminated composite shells based on the element independent corotational formulation. Numerical re- sults show that the present shell element has an excellent numerical performance for the test examples, and is applicable to stiffened plates.     

Transient impact responses of laminated composite cylindrical shells

The generalized ray method (GRM) has been successfully used to study the transient elastic wave transmitting in the beams, planar trusses, space frames and infinite layered media. In this letter, the GRM is extended to investigate the early short time transient responses of laminated composite cylindrical shells under impact load. By using the Laplace transformation and referring to the boundary conditions, the ray groups transmitting in the finite laminated cylindrical shells under the shock load are obtained and the transient response related to each ray group can be derived via FFT algorithm. From the numerical results, it is shown that the early short time transient accelerations of the laminated composite cylindrical shell under impact loads are very large. But the short time transient shear strain and displacement are very small.     

基于高阶剪切变形理论的四边形求积元板单元及其应用

近年来由各类新型复合材料或功能梯度材料构成的板结构在工程领域得到了广泛应用,其显著特点是材料性能沿板厚变化.为合理考虑横向剪切应变,许多学者基于Reddy高阶剪切变形理论,构建了不同的有限元单元对该类板结构进行分析,但其中满足$C^{1}$连续条件的单元相对较少.本文基于Reddy高阶剪切变形理论,采用求积元方法,建立了$C^{1}$连续的四边形板单元.利用该单元对均质材料、复合材料、功能梯度材料构成的等厚度矩形板、变厚度矩形板及等厚度斜板的线弹性弯曲和自由振动问题进行了计算分析,并与现有文献中的相应计算结果进行了对比.研究表明:基于高阶剪切变形理论的四边形求积元板单元具有较高的计算效率和良好的适应性,文中各类材料构成的等变厚度矩形板及等厚度斜板均只需1个单元即可得到理想的计算结果.对于等/变厚度矩形板,可仅使用9$\times$9个积分点,而对于等厚度斜板,随着斜角的增大,所需积分点的数目逐渐增多至15$\times $15.该四边形求积元板单元可进一步用于新型复合材料板的非线性分析.      

复合材料结构几何非线性分析

本文采用退化的等参壳元分析了复合材料板、壳结构的几何非线性特性。数值计算表明：与各向同性材料不同,即使在很小的载荷和挠度下,几何非线性对复合材料结构的影响也是相当显著的。     

A unified Chebyshev–Ritz formulation for vibration analysis of composite laminated deep open shells with arbitrary boundary conditions

In this paper, a unified Chebyshev–Ritz formulation is presented to investigate the vibrations of composite laminated deep open shells with various shell curvatures and arbitrary restraints, including cylindrical, conical and spherical ones. The general first-order shear deformation shell theory is employed to include the effects of rotary inertias and shear deformation. Under the current framework, regardless of boundary conditions, each of displacements and rotations of the open shells is invariantly expressed as Chebyshev orthogonal polynomials of first kind in both directions. Then, the accurate solutions are obtained by using the Rayleigh–Ritz procedure based on the energy functional of the open shells. The convergence and accuracy of the present formulation are verified by a considerable number of convergence tests and comparisons. A variety of numerical examples are presented for the vibrations of the composite laminated deep shells with various geometric dimensions and lamination schemes. Different sets of classical constraints, elastic supports as well as their combinations are considered. These results may serve as reference data for future researches. Parametric studies are also undertaken, giving insight into the effects of elastic restraint parameters, fiber orientation, layer number, subtended angle as well as conical angle on the vibration frequencies of the composite open shells.     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

NONLINEAR TRANSIENT RESPONSE OF FUNCTIONALLY GRADED SHALLOW SPHERICAL SHELLS SUBJECTED TO MECHANICAL LOAD AND UNSTEADY TEMPERATURE FIELD

This paper is concerned with the transient deformation of functionally graded （FG） shallow spherical shells subjected to time-dependent thermomechanical load. Based on Timoshenko- Mindlin hypothesis and yon Karman nonlinear theory, a set of nonlinear governing equations of motion for FG shallow spherical shells in regard to transverse shear deformation and all the inertia terms are established using Hamilton＇s principle. The collocation point method and Newmark- beta scheme in conjunction with the finite difference method are adopted to solve the governing equations of motion and the unsteady heat conduction equation numerically. In the numerical examples, the transient deflection and stresses of FG shallow spherical shells with various material properties under different loading conditions are presented.     

基于Layerwise离散层理论的复合材料夹层板屈曲分析

复合材料夹层结构由于面板和芯层力学特性差异较大,屈曲分析时要分层考虑各层的剪切变形。基于Reddy的Layerwise离散层理论,假设每一层变形服从一阶剪切变形理论,在统一的位移场描述下,推导建立了一种用于复合材料夹层结构屈曲分析的四节点四边形板单元,并采用混合插值方法对单元的剪切锁定进行了修正。分别对三种典型的夹层板结构进行线性屈曲有限元分析,并将计算结果与文献中已有结果进行了对比。结果表明：本文的分析方法能离散考虑各层的力学特性,将结构离散为多层时,计算结果与三维弹性理论或高阶板理论吻合;将结构等效为单层时,计算结果与基于一阶剪切变形理论的文献结构吻合,验证了单元的有效性。     

复合材料层合板的摄动随机Cell-Based光滑有限元

随机性是实际工程结构的固有特性,如何更真实地描述含随机参数结构的随机响应及统计特性,对工程结构的可靠性设计具有非常重要的意义。本文基于Cell-Based光滑有限元,采用四边形单元,推导了基于一阶剪切变形理论的复合材料层合板的光滑有限元公式,降低了网格划分要求,适应不规则网格,并采用离散剪切间隙有效地消除了剪切自锁;结合摄动法和随机场理论,导出了复合材料层合板的摄动随机光滑有限元平衡方程,并给出了结构随机响应数字特征的计算公式,求解了材料属性含随机性的复合材料层合板的随机响应问题,数值算例结果表明了本方法的有效性和准确性。     

矩形脉冲作用下复合材料层合扁球壳的冲击屈曲分析

研究了计及横向剪切的复合材料层合扁球壳在矩形脉冲载荷作用下的非线性动力屈曲问题;采用Galerkin方法得到以顶点挠度表达的动力响应方程,并用Runge-Kutta方法进行数值求解,应用Budiansky-Roth准则(简称B-R准则)确定冲击屈曲的临界荷载;讨论了壳体几何尺寸和物理参数对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,该方法是可行的.     

加筋板壳稳定性分析中一种简单的有限元模式

采用考虑耦合和剪切效三结点十五参数罚函数层板壳单元和与之相适应的两结点非协调层合梁单元，适用于任意和筋复合材料层合板壳的稳定性分析。数值计算表明：该单元不仅对边界形状的适应性强，而且在工程精度范围内具有简单，经济，高效的优点。     

Geometrically non-linear analysis of laminated composite structures using a 4-node co-rotational shell element with enhanced strains

To demonstrate the solutions of linear and geometrically non-linear analysis of laminated composite plates and shells, the co-rotational non-linear formulation of the shell element is presented. The combinations of an enhanced assumed strain (EAS) in the membrane strains and assumed natural strains (ANS) in the shear strains improve the behavior of 4-node shell element. To secure computational efficiency in the incremental non-linear analysis, the present element uses the form of the resultant forces pre-integrated through the thickness. The transverse shear stiffness of the laminates is defined by an equilibrium approach instead of the shear correction factor. Numerical examples of this study show very good agreement with the references.     

含分层损伤复合材料层合板的压缩强度研究

给出了基于一阶剪切变形理论的含分层损伤层合板有限元分析模型,将含分层损伤层合板在压缩载荷作用下的强度破坏分析和屈曲破坏分析统一起来。先区分其破坏形式,然后再进行具体破坏分析,在屈曲特性分析中考虑了铺层强度破坏引起的刚度折减的影响,数值结果表明,该文给出的方法和结论对含分层损伤复合材料层合板的设计更具参考价值。     

爆炸冲击下复合材料层合扁球壳的动力屈曲

研究计及横向剪切的复合材料层合扁球壳在爆炸冲击载荷作用下的非线性轴对称动力屈曲问题。通过在复合材料层合扁球壳非线性稳定性的基本方程中增加横向转动惯量项并引入R.H.Cole理论的爆炸冲击力,得到爆炸冲击下复合材料层合扁球壳的动力控制方程,应用Galerkin方法得到用顶点挠度表达的爆炸冲击动力响应方程,并采用Runge-Kutta方法进行数值求解,采用Budiansky-Roth准则确定冲击屈曲的临界载荷,讨论了壳体几何尺寸对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,此方法是可行的。     

考虑横向剪切变形和旋转惯性的层合正交异性球壳的动态响应

本文建立了计及横向剪切变形的旋转惯性的复合材料轴对称层合圆柱正交异性球壳的运动方程。在此基础上，用有限差分法计算了球壳在轴对称动力载荷下的动态响应，并讨论了材料参数、结构参数和横向剪切变形的影响。     

Accurate equations for laminated composite deep thick shells

This paper derives accurate equations of elastic deformation for laminated composite deep, thick shells. The equations include shells with a pre-twist and accurate force and moment resultants which are considerably different than those used for plates. This is due to the fact that the stresses over the thickness of the shell have to be integrated on a trapezoidal-like cross-section of a shell element to obtain the stress resultants. Numerical results are obtained and showed that accurate stress resultants are needed for laminated composite deep thick shells, especially if the curvature is not spherical. A consistent set of equations of motion, energy functionals and boundary conditions are also derived. These may be used in obtaining exact solutions or approximate ones like the Ritz or finite element methods.     

Nonlinear shell-type to beam-type fea simplifications for composite frp poles

This paper presents a semi-analytical finite element analysis of pole-type structures with circular hollow cross-section. Based on the principle of stationary potential energy and Novozhilov’s derivation of nonlinear strains, the formulations for the geometric nonlinear analysis of general shells are derived. The nonlinear shell-type analysis is then manipulated and simplified gradually into a beam-type analysis with special emphasis given on the relationships of shell-type to beam-type and nonlinear to linear analyses. Based on the theory of general shells and the finite element method, the approach presented herein is employed to analyze the ovalization of the cross-section, large displacements, the P-Δ effect as well as the overall buckling of pole-type structures. Illustrative examples are presented to demonstrate the applicability and the efficiency of the present technique to the large deformation of fiber-reinforced polymer composite poles accompanied with comparisons employing commercial finite element codes.