碳纤维布与钢板复合加固梁剥离破坏研究

通过12根碳纤维布与钢板复合加固钢筋混凝土梁的抗弯性能研究,结果表明复合加固方式能有效地改善被加固构件的受力性能,但常由于复合加固层的剥离可能导致加固效果的降低。复合加固层与被加固构件之间的剥离是由于薄弱截面在剪应力及正应力的集中作用下而产生的,文中对复合加固层与混凝土之间的粘结剪应力及剥离正应力的计算公式分别进行推导,并进一步对碳纤维布与钢板复合加固的剥离机理进行分析,为工程应用提供依据。     

CFRP布加固具有边缘裂纹板条的疲劳性能

将碳纤维增强复合材料(CFRP)布在板条两表面双面粘贴加固具有边缘穿透裂纹的板条,研究了加固板条在两端循环拉伸载荷作用下的断裂和疲劳性能.首先建立了CFRP布加固板条粘结层与CFRP布/板条的界面剪应力控制方程,并求得两端均布拉力作用下CFRP布加固具有边缘穿透裂纹的板条的界面剪应力解析解.其次,利用叠加原理推导了CFRP加固板条裂纹尖端的应力强度因子表达式,分别给出了其Paris和Elber模型疲劳寿命公式,通过与相关实验结果的比较,发现Elber模型的疲劳寿命公式与试验结果较吻合.最后的参数研究表明:CFRP布刚度对应力强度因子范围有显著的影响,且应力强度因子范围随CFRP布长度或粘贴层剪切模量的增加而减小,并趋于定值.同时,粘贴胶厚度对应力强度因子范围几乎没有影响.     

基于"梁段"跨中FRP-混凝土界面剪应力数值计算

纤维复合材料(FRP)加固混凝土梁跨中可能发生剥离破坏,研究者已提出几种计算FRP-混凝土粘结界面剪应力τ的方法,但所得结果有较大的差异.本文先通过典型的FRP-混凝土界面的粘结-滑移本构关系和FRP加固梁实验结果,评估既有计算方法存在的问题.进而提出一个简单的"梁段"有限元计算模型,并证实其合理性和可靠性.再用此模型计算讨论了多种参数影响下的FRP-混凝土界面剪应力τ分布特征.基于实验研究和有限元计算结果,指出FRP-混凝土界面剪应力最大值τu不适合作为剥离破坏准则,并建议考虑将滑移量最大值δ作为FRP-混凝土界面的剥离破坏准则.     

FRP-混凝土界面粘结行为的参数影响研究

FRP-混凝土界面的粘结性能对FRP加固混凝土结构力学行为和破坏模式有着重要影响。本文对表征FRP-混凝土界面粘结性能的三个重要参数(界面初始刚度、最大剪应力、界面破坏能)开展研究,通过13个单剪试件的试验考察了混凝土强度、胶层厚度和粘结长度等因素对界面粘结行为的影响,根据试验结果拟合了界面破坏能、最大剪切应力与胶层剪切刚度、混凝土强度之间的函数关系。在试验研究基础上,构建了外贴FRP-混凝土界面粘结的有限元模型。通过有限元分析考察了界面破坏能等三个参数不变的前提下,不同的局部粘结滑移本构关系对界面粘结行为的影响;进而研究了其中一个参数变化时引起的界面粘结性能改变。研究结果表明:界面粘结承载力随着胶层厚度增加而逐渐提高;胶层厚度与界面破坏能成正比,与峰值剪应力成反比;当界面破坏能等三个参数保持不变时,局部粘结滑移本构关系对FRP-混凝土界面粘结性能的影响较小;三个参数中的一个增大时将延缓界面破坏的过程。     

连钢箍接头服役混凝土电杆的性能评估及加固研究

为了揭示带钢箍接头服役混凝土电杆的破坏机理和承载性能,对3根长4.2m、3根长3.5m的带有钢箍接头的混凝土电杆以及3根长4.2m采用碳纤维布(CFRP)加固的钢箍接头电杆进行了抗弯承载力试验。通过试验观察了各试件的受力全过程和破坏形态,并获取了荷载-挠度曲线、刚度退化规律曲线、极限承载力等重要指标。研究结果表明:未加固试件的破坏形态大多为混凝土拉裂、接头钢箍不屈服,具有明显的脆性;加固接头试件的破坏过程迅速,主要表现为混凝土与CFRP的表面粘脱失效而破坏,过程迅速,具有脆性破坏特点,黏贴双层碳纤维布试件比采用单层碳纤维布试件的承载力提高了32.8%;对比加固和未加固接头的试件,经单层加固后电杆的承载力提高58.8%、初始弹性刚度提高达3倍,且延性性质也有所改善;但加固与未加固试件的耗能能力大致相当,其截面应变均符合平截面假定。     

粘贴碳纤维布加固混凝土管道试验研究

首次通过对14个素混凝土和14个钢筋混凝土环状试件外粘碳纤维布加固性能进行试验，研究了碳纤维布加固混凝土内压圆管的破坏特征、受力性能和破坏机理。对不同加固方法及一次或二次受力的混凝土管在内压力作用下的极限承载力、荷载一应变关系等方面进行了研究。试验结果表明，用碳纤维布加固混凝土内压管可以显著地提高极限承载力，明显的改善了构件的延性，能够获得良好的力学性能。加固后试件的开裂承载力与未加固试件相比，提高幅度不大，加固试件二次受力与一次受力相比，开裂荷载有所降低，但极限承载力基本相同。用碳纤维布加固内压管是一个新课题，具有很好的应用前景，用本文提出的加固方法具有优良的加固性能，可为工程应用提供参考。     

ESPI技术对外贴纤维混凝土加固承载的实验研究

采用电子散斑干涉技术,对外贴碳纤维加固混凝土梁的外贴材料位移的分布特征,进行了全场实时测量,通过实验获得的散斑干涉条纹图可以得到外贴材料与混凝土梁的粘结传力长度随粘结长度及初始载荷之间的关系;了解用于加固的碳纤维材料的应变分布特点和产生梁侧剥离破坏时的碳纤维表面位移(应变)的演化过程。实验还说明了电子散斑干涉技术不仅可用于位移的测量,而且也可用于结构安全监测和破坏预报。文中给出了对C20D、C25A和C60C侧贴碳纤维板加固在不同载荷作用直到构件破坏前的位移测试及对试件C60C轴线上的剪应力分析结果。     

FRP加固梁的FRP-混凝土界面脱胶分析

为了研究纤维增强聚合物(fiber reinforced polymer, FRP) 加固梁的FRP-混凝土界面脱胶破坏过程,本文将混凝土梁和FRP 板均视为线弹性的欧拉-伯努利梁(Euler-Bernoulli beams), 且两者通过粘结层胶结在一起. 对于FRP-混凝土结构,有两种形式的脱胶破坏：板端脱胶破坏和跨中裂缝导致的脱胶破坏.对于FRP-混凝土梁,利用合理的粘结模型按第2 种脱胶失效形式,详细讨论了FRP-混凝土界面的脱胶过程,得到了不同阶段的胶结滑移、界面剪应力和FRP 轴向力的解析解. 实验研究验证了理论分析的结果,参数研究进一步探讨了胶结长度和粘结层厚度对于FRP-混凝土界面脱胶行为的影响.     

纤维增强混凝土材料的界面剪应力分布研究

针对纤维与混凝土界面的破坏过程,提出了几种简化的粘结-滑移本构模型,以双线性局部粘结-滑移本构模型为基础,在受力平衡和变形协调的基本原理基础上,推导了纤维脱粘过程中界面剪应力的解析解.采用弹簧粘结单元,通过数值方法模拟了纤维与混凝土之间的粘结-滑移过程,给出了纤维与混凝土界面脱粘过程中界面剪应力的分布、变化情况.对解析解、有限元计算结果和试验结果之间的差异进行了对比分析,验证了简化模型的合理性和有效性.     

爆炸荷载下碳纤维布加固混凝土板的抗弯性能研究

为研究碳纤维布加固混凝土板的抗爆能力,用混凝土HJC动力本构模型,建立了混凝土板、炸药及考虑空气介质影响的流固耦合有限元计算模型.用动力分析软件ANSYS/LS-DYNA,对在爆炸荷载作用下未粘贴碳纤维布以及用碳纤维布加固下的混凝土板的跨中位移及受力性能进行了数值分析.研究结果表明:混凝土板用碳纤维布粘贴加固后抗爆炸冲击能力明显提高,且碳纤维布粘贴在一定层数以内时,其抗爆炸冲击能力与加固层数成正比,继续增加层数时抗爆能力提高不明显,甚至有相反的变化趋势.     

Exact static solutions to piezoelectric smart beams including peel stresses. II. Numerical results,comparison and discussion

This part presents the numerical results, comparisons and discussion for the exact static solutions of smart beams with piezoelectric (PZT) actuators and sensors including peel stresses presented in Part I. (International Journal of Solids and Structures, 39, 4677–4695) The actuated stress distributions in the adhesive and the adhesive edge stresses varying with the thickness ratios are firstly obtained and presented. The actuated internal stress resultants and displacements in the host beam are then calculated and compared with those predicted by using the shear lag model. The stresses in the adhesive caused by an applied axial force, bending moment and shear force are calculated, and then used to compute the sensing electric charges for comparison with those predicted using the shear lag model. The numerical results are given for the smart beam with (a) one bonded PZT and (b) two symmetrically bonded PZTs, with a comparison to those predicted using the shear lag model. Novel, simple and more accurate formulas for the equivalent force and bending moment induced by applied electric field are also derived for the host beam with one PZT or two symmetrically bonded PZTs. The symmetric shear stress and the anti-symmetric peel stress components caused by a shear force are discussed. In addition, in the case of PZT edge debonding, the stress redistribution in the adhesive and the self-arresting mechanism are also investigated.     

Finite element analysis of interfacial stresses in FRP–RC hybrid beams

The interfacial stresses in fiber reinforced plastic (FRP)–reinforced concrete (RC) hybrid beams were studied by the finite element method. The mesh sensitivity test shows that the finite element results for interfacial stresses are not sensitive to the finite element mesh. The finite element analysis then is used to calculate the interfacial stress distribution and evaluate the effect of the structural parameters on the interfacial behavior. It is shown that both the normal and shear stresses at the interface are influenced by the material and geometry parameters of the composite beam. This research is helpful for the understanding on mechanical behavior of the interface and design of the FRP–RC hybrid structures.     

?????????????????????????

摘 要：利用大型通用有限元软件ANSYS10.0，首先对钢筋混凝土试件梁采用了三维的建模方式，然后对其抗弯性能进行了非线性数值模拟，所模拟的量包括各临界荷载、挠度、应力分布、中和轴的移动等，模拟结果与实测值吻合得很好。该方法可以用来分析钢筋混凝土梁板构件的承载能力，也可以应用在某些院校的教学中。     

A three-parameter elastic foundation model for interface stresses in curved beams externally strengthened by a thin FRP plate

Externally bonding of fiber reinforced polymer (FRP) plates or sheets has become a popular method for strengthening reinforced concrete structures. Stresses along the FRP–concrete interface are of great importance to the effectiveness of this type of strengthening because high stress concentration along the FRP–concrete interface can lead to the FRP debonding from the concrete beam. In this study, we develop an analytical solution of interface stresses in a curved structural beam bonded with a thin plate. A novel three-parameter elastic foundation model is used to describe the behavior of the adhesive layer. This adhesive layer model is an extension of the two-parameter elastic foundation commonly used in existing studies. It assumes that the shear stress in the adhesive layer is constant through the thickness, and the interface normal stresses along two concrete/adhesive and adhesive/FRP interfaces are different. Closed-form solutions are obtained for these two interfacial normal stresses, shear stress within the adhesive layer, and beam forces. The validation of these solutions is confirmed by finite element analysis.     

端部受斜冲击的刚塑性悬臂梁的双铰模型

斜冲击载荷作用在刚塑性悬臂梁的端部,引起作用在梁横截面处的弯矩以及轴力;在发生塑性变形截面处,弯矩及轴力满足交互作用屈服条件。广义应力在移行铰的邻域不违背屈服条件,屈服函数可在移行铰的背面取极大值,移行铰处的剪切力不必为零。如果悬臂梁足够长,在响应的初始阶段移行铰处非零的剪力会在梁上引起多铰变形。通过对双铰模型与单铰模型的比较发现,双铰模型计算的结果与单铰模型计算的结果很接近,单铰模型作为一个近似模型具有一定的合理性。     

Failure criterion for reinforced concrete beams and plates subjected to membrane force,bending and shear

In this paper, a failure criterion for reinforced concrete plates is derived through the kinematic method in the framework of the limit analysis theory. This criterion is expressed in terms of the stress resultant variables: membrane force, shear force and bending moment at once. The aim of the authors is to be able to predict the failure of reinforced concrete plate structures in statics or in slow dynamics using directly the internal forces (membrane and shear forces and moment) resulting from a finite-element computation.In a first step, a beam criterion is derived. The closed form expression of the criterion shows that it is made up of two parts, one independent of the moment (i.e. depending only on the normal force and the shear force) and one depending on the normal force, the shear force and the bending moment. This structure of the criterion allows to determine two failure modes: shear failure and bending failure.Then in a second step, the beam criterion is extended to the case of reinforced concrete plates. The obtained criterion is partly numerical and partly a close form expression. It gives an upper bound of the load, and when this limit load is reached, the criterion is able to supply, on one hand, the failure mode (as seen in the beam case) and, on the other hand, the angles of the failure plane in the reinforced concrete plate section.Thirdly, the criterion is implemented in the finite element software Europlexus and validated with respect to punching experimental tests. We show that the criterion must be used with an effectiveness factor applied on the concrete compressive strength.     

THEORETICAL MODEL ON INTERFACE FAILURE MECHANISM OF REINFORCED CONCRETE CONTINUOUS BEAM STRENGTHENED BY FRP

Fiber reinforced polymer （FRP） composites are increasingly being used for the re-pair and strengthening of deteriorated concrete structural components through adhesive bonding of prefabricated strips/plates and the wet lay-up of fabric. Interfacial bond failure modes have attracted the attention of researchers because of the importance. The objective of the present study is to analyse the interface failure mechanism of reinforced concrete continuous beam strength-ened by FRP. An analytical solution has been firstly presented to predict the entire debonding process of the model. The realistic bi-linear bond-slip interfacial law was adopted to study this problem. The crack propagation process of the loaded model was divided into four stages （elastic,elastic-softening,elastic-softening-debonded and softening-debonded stage）. Among them,elastic-softening-debonded stage has four sub-stages. The equations are solved by adding suitable stress and displacement boundary conditions. Finally,critical value of bond length is determined to make the failure mechanism in the paper effective by solving the simultaneously linear algebraic equations. The interaction between the upper and lower FRP plates can be neglected if axial stiffness ratio of the concrete-to-plate prism is large enough.     

ANALYTICAL ANALYSIS OF INTERFACIAL STRESSES IN FRP-RC HYBRID BEAMS WITH TIME-DEPENDENT DEFORMATIONS OF RC BEAM

In this paper, the effect of time-dependent deformations (such as shrinkage and creep) on the interfacial stresses between an RC beam and FRP plate is presented. For this end, a closed-form solution for such stresses in externally FRP plated RC beams including creep and shrinkage effects is presented. The developed model is formulated to predict the interfacial stresses at time ‘t’, in which the RC beams have been already subjected to creep and shrinkage effects. The adherend shear deformations have been included in the present theoretical analysis by assuming a parabolic shear stress through the thickness of the RC beam and the FRP panel. Contrary to some existing studies, the assumption that both RC beam and FRP panel have the same curvature is not used in the present investigation. This research is helpful for the understanding on mechanical behavior of the interface and design of the FRP-RC hybrid structures.     

Transversely isoiropic beam under initial stress

Starling from Novozhilov’s nonlinear equations of elasticity by appropriate simplification and integration over the beam cross-section, a linearized set of equations for a transversely isotropic beam under initial non-uniform state of stress is obtained. In the absence of initial stress, the obtained equations are reduced to well-known Timoshenko beam equations.These equations are applied to investigate the vibration and buckling characteristics of a transversely isotropic beam under uniform initial axial force and bending moment.