轴向冲击载荷作用下锥壳中弹性应力波传播的计算和实验研究

本文利用有限元分析和模型实验研究了在轴向冲击载荷作用下,锥壳中弹性应力波的传播、计算和实验结果表明,结构中存在着弹性纵波和弹性弯曲波的传播,它们传播的速度各不相同,使壳面承受不同的应力状态;讨论了纵波和弯曲波随壳面的衰减;实验指出,由于边界的影响,即使纵波的反射也会产生新的反射弯曲波沿锥面传播。     

平面杆系结构弹性波传播的实验研究

利用ＳＨＰＢ装置，用空气枪加载就３５ＣｒＭｎＳｉ钢组成的平面杆系结构受冲击载荷作用的弹性波传播进行了实验研究，给出了一些力学现象，并利用广义特征线法给出了理论与实验的比较曲线，得到了一些有益的结论．     

粘塑性变截面杆中冲击波的演化

讨论了粘塑性变截面杆中的一维应力波传播规律。在粘塑性本构理论框架的基础上,利用特征关系和冲击波阵面上的突跃条件,得出了冲击波在传播过程中的演化规律,包括其微分方程和解析表达式,并对Bodner和Johnson-Cook材料和不同收缩形式的杆中冲击波的演化规律进行了讨论,同时计算和讨论了杆中冲击波后方应力波传播规律的特点。     

杆中嵌入薄板的应力波传播行为

采用一维理论分析和二维有限元模拟,研究了杆中嵌入薄板的应力波传播行为.首先根据一维弹性应力波理论,推导了反射波,透射波以及板中应力的表达式.结合算例,分析了薄板厚度对应力波传播的影响,然后采用有限元方法,验证了一维理论分析结果,同时也研究了不同界面处理方式对结果的影响.结果表明板越薄,对应力波传播的影响越小,薄板中应力越能真实地反映杆中的应力状态;在SHPB实验中,嵌入薄片/薄膜传感器测量微弱应力信号是可行的.     

USING LAPLACE TRANSFORM TO SOLVE THE VISCOELASTIC WAVE PROBLEMS IN THE SHPB EXPERIMENTS

对分离式霍普金森压杆(split Hopkinson pressure bar, SHPB) 实验中试件的黏弹性波传播的控制方程组进行Laplace 变换,并结合恰当的初始-边界条件求解,得到变换域的应力、速度、应变等变量的像函数的精确表达式. 采用该方法处理SHPB 实验中涉及黏弹性试件内部应力非均匀性问题,并给出数值反变换解. 作为特例,对于弹性试件分别采用级数展开法和留数定理进行反Laplace 变换,从而给出弹性夹层介质中应力波传播问题的解析解.     

Laplace变换法研究SHPB实验中试件的黏弹性波传播问题

对分离式霍普金森压杆(split Hopkinson pressure bar, SHPB) 实验中试件的黏弹性波传播的控制方程组进行Laplace 变换,并结合恰当的初始-边界条件求解,得到变换域的应力、速度、应变等变量的像函数的精确表达式. 采用该方法处理SHPB 实验中涉及黏弹性试件内部应力非均匀性问题,并给出数值反变换解. 作为特例,对于弹性试件分别采用级数展开法和留数定理进行反Laplace 变换,从而给出弹性夹层介质中应力波传播问题的解析解.      

失谐周期结构中弹性波与振动的局部化

基于弹性波传递矩阵方法，研究了失谐周期结构中弹性波与振动的局部化问题．给出了结构中弹性波传递矩阵的一般表达式，采用奇异值分解方法，分别计算了谐和与失谐周期结构中的局部化因子，并对其进行了分析讨论．对周期结构中波传播与振动局部化的分析方法可用于结构的优化设计．     

非线性弹性杆中的应变孤波

本文对非线性弹性杆中的应变孤波进行了分析,着重讨论了杆的物理参数和几何参数对于波动的影响,阐明了孤波传播过程的主要特征。     

应力波传播与屈曲耦合情况下结构动力屈曲控制方程探讨

从应力波作用下结构动力屈曲的特点出发,指出应力波作用下结构动力屈曲与结构中应力波传播的耦合导致时间成为结构动力屈曲的参变量,从而应力波作用下结构动力屈曲问题中结构的真实运动与邻近运动是不同时刻、不同扰动区域的比较,这使得其动力屈曲控制方程的建立不宜采用传统的等时积分变分原理;以压应力波作用下弹性直杆为例,应用能量守恒原理,根据屈曲时刻结构能量的转换关系,建立了弹性压应力波作用下半无限长直杆的动力屈曲控制方程,并得到了波前附加约束条件;最后,讨论了波前附加约束条件的物理意义,指出波前附加约束条件出现的根本原因是轴向应力波的传播与屈曲不能解耦。     

非均质变截面杆中弹性波的反射和透射

基于一维弹性波理论，本文对应力波在非均质变截面杆中传播问题进行了一维简单波分析，并把分析结果与二维轴对称有限元分析结果进行了比较，表明一维简单波分析是非常有效和实用的。利用一维简单波分析方法，本文还揭示了应力波在非均质变截面杆中的传播规律，特别对含有内部交界面的非均质变截面杆（带有连接段）进行了一维等效简化分析，研究了连接段对应力波传播的影响。     

一种基于直接计算高阶奇异积分的断裂力学双边界积分方程分析法

相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果.      

汶川地震诱发文家沟巨型滑坡 碎屑流基本特征及成因机制初步分析


2008年5月12日,汶川M80地震在四川省绵竹市清平乡文家沟内诱发一巨型滑坡。通过现场调查得知,滑坡前后缘高差455m,厚度20～30m,滑面为基岩层面,初始方量2750×107m3。滑体在运动中转化为碎屑流。滑坡-碎屑流总的水平运动距离为4022m,垂直运动距离为1443m,遗留的堆积物体积达5×107m3。滑坡距映秀—北川断裂仅36km,位于其下盘,地震烈度达XI度。滑坡导致文家沟中48人遇害,并形成一条完整的地震次生地质灾害链。初步分析表明滑坡启动速度快,滑坡向碎屑流转化过程明显、地点明确。碎屑流运动过程复杂,伴有强烈的“气垫效应”和“前缘气浪冲击效应”。作者认为,文家沟滑坡的高启动速度是长持时强烈地震动作用的结果,与山体的猛烈碰撞是导致滑体解体并转化为碎屑流的原因。     

Preface: Orbits around asteroid

One of the core issues in modern celestial mechanics is the orbital dynamics in the near-regime gravitational field of as- teroids, which provides deep insights into the mathematical nature of a class of nonlinear systems, and plays as a critical basis for in situ explorations of different science goals. Lots of efforts have been made to reveal the characteristics of orbital motion in the vicinity of asteroids, and to improve the skills of asteroid research in methodology.     

Preface: Current research progress on mechanics of high speed rail

The construction and operation of high-speed rail（HSR）grid within the past two decades in China,in terms of the scale,may be possibly comparable to any national-wide construction in the history of China,even the Great Wall.By counting railways with commercial train service at the speed of200 km/h,China has the world’s longest HSR network with over 19 369.8 km of track in service today and this number     

ACTA MECHANICA SINICA 2014 ANNUAL SUBJECT INDEX

正~~     

Effet de l'anisotropie élastique cristalline sur la distribution des facteurs de Schmid à la surface des polycristauxInfluence of crystalline elasticity anisotropy on Schmid factor distribution at the free surface of polycrystals

Experimental studies of the plasticity mechanisms of polycrystals are usually based on the Schmid factor distribution supposing crystalline elasticity isotropy. A numerical evaluation of the effect of crystalline elasticity anisotropy on the apparent Schmid factor distribution at the free surface of polycrystals is presented. Cubic elasticity is considered. Order II stresses (averaged on all grains with the same crystallographic orientation) as well as variations between averages computed on grains with the same crystallographic orientation but with different neighbour grains are computed. The Finite Element Method is used. Commonly studied metals presenting an increasing anisotropy degree are considered (aluminium, nickel, austenite, copper). Concerning order II stresses in strongly anisotropic metals, the apparent Schmid factor distribution is drifted towards small Schmid factor values (the maximum Schmid factor is equal to 0.43 instead of 0.5) and the slip activation order between characteristic orientations of the crystallographic standard triangle is modified. The computed square deviations of the stresses averaged on grains with the same crystallographic orientation but with different neighbour grains are a bit higher than the second order ones (inter-orientation scatter). Our numerical evaluations agree quantitatively with several observations and measures of the literature concerning stress and strain distribution in copper and austenite polycrystals submitted to low amplitude loadings. Hopefully, the given apparent Schmid factor distributions could help to better understand the observations of the plasticity mechanisms taking place at the free surface of polycrystals. To cite this article: M. Sauzay, C. R. Mecanique 334 (2006).     

Nonlinear behavior of matrix-inclusion composites under high confining pressure: application to concrete and mortar

This paper is devoted to a micromechanics-based simulation of the response of concrete to hydrostatic and oedometric compressions. Concrete is described as a composite made up of a cement matrix in which rigid inclusions are embedded. The focus is put on the role of the interface between matrix and inclusion which represent the interfacial transition zone (ITZ). A plastic behavior is considered for both the matrix and the interfaces. The effective response of the composite is derived from the modified secant method adapted to the situation of imperfect interfaces. To cite this article: T.H. Le et al., C. R. Mecanique 336 (2008).