裂变位垒参数的推荐和裂变位垒参数库

通过分析和计算锕系核裂变截面和全套中子反应截面获取了一组锕系核的裂变位垒参数.Fm)在此基础上,广泛收集实验裂变位垒参数,通过比对和评价,推荐了本组的129个核素(109Cd—255的实验裂变位垒参数.此外,对收集的不同裂变位垒参数作了分析与评价,推荐了7组实验和1组模型计算的裂变位垒参数,并组建了中国评价核参数库裂变位垒参数子库(CENPL FBPL). The fission barrier parameters for actinide nuclei were obtained by analysis and calculations of fission cross-sections and complete neutron reaction cross sections. A lot of experimental fission barrier parameters from different authors were collected. A set of fission barrier parameters for 129 nuclei ranging from~(109)Cd~( ) to~(255)Fm were recommended after performing comparisons, evaluations and systematics extrapolations for these extracted fission barrier parameters in model calculations of fissi...     

锕系原子核自发裂变性质的理论研究

运用推广的液滴模型（GLDM）来确定锕系原子核的自发裂变势垒, 采用量子力学中的WKB近似方法对相应自发裂变的半衰期进行了研究。 在GLDM中, 首次考虑了微观Strutinsky壳修正对裂变势垒的影响。 理论计算的锕系区重核自发裂变半衰期与实验值符合得很好, 表明包括微观壳修正的GLDM可以成功研究重核的自发裂变性质。 The spontaneous fission half lives of the actinides are calculated by the WKB approximation and the potential barriers are constructed by a General Liquid Drop Model (GLDM) including the proximity energy, the mass and charge asymmetry, and an accurate nucleus radius. The microscopic shell correction which plays a key role for the spontaneous fission barrier is considered for the first time. The two parameter quasi molecular shape and the proximity are described in details within the GLDM. The effects of the microscopic shell correction and proximity energy for fission barrier are discussed separately. The calcula ted spontaneous fission half lives for the actinides reasonably accord with the experimental data, implying the present GLDM combined with the microscopic shell correction can be used to study the spontaneous fission properties of heavy nuclei successfully.     

氟盐冷却球床高温堆次锕系核素的嬗变研究

针对氟盐冷却球床高温堆(FHR)深燃耗的特征,研究了FHR嬗变次锕系核素(MA)的可行性。研究结果表明:(1) 优化后燃料球的参数为U-235富集度19.75%,UO₂与MAO₂质量比为18:1;(2) 燃料球在堆芯内的流速为4.59 cm/d、最深燃耗150 GWd/tHM;(3) 次锕系核素的总嬗变率为26.16%。其中,Np-237、Am-241、Am-243通过中子的俘获吸收到重核素、$\beta $衰变到裂变核素两条途径可有效嬗变,Cm-243、Cm-244、Cm-245由于轻核素的俘获吸收以及$\beta $衰变的积累效应,不能有效嬗变。     

基于裂变γ标识技术的瞬发裂变中子谱测量新方法

瞬发裂变中子谱（prompt fission neutron spectrum,PFNS）是用于核实验诊断过程中十分重要的参数数据,传统的测量主锕系核素（U,Pu）PFNS的技术手段是采用裂变室,利用裂变碎片标识裂变中子,通过中子飞行时间技术获得裂变中子谱.目前出现了一种新的用于PFNS测量的技术,其原理是基于如下的物理事实：在一次裂变过程中,释放中子的同时伴随着释放7–8个γ射线光子,而非弹性散射效应产生的γ射线光子只有1–2个.据此,可以通过裂变γ射线的多重性将裂变中子和其他杂散中子甄选出来,达到测量PFNS的目的.本文建立了基于裂变γ标识技术的PFNS测量实验系统.利用该系统对²⁵²Cf中子源的PFNS进行了实验测量,测量结果与传统的裂变碎片标识法及ENDF/B-VⅡ数据库的标准谱进行了比较,对新方法的裂变标识率以及实验不确定度也一并进行了分析.     

压水堆核电厂燃料棒破损诊断分析研究

燃料棒是核电厂包容放射性物质的第一道屏障。燃料棒破损会导致冷却剂裂变产物活度升高,严重时机组须在数小时内后撤到停堆。通过取样监测的冷却剂放射化学数据可以一定程度上反映堆芯内装载燃料棒的破损情况。本研究介绍了压水堆核电厂功率运行期间冷却剂内裂变产物的来源,分析了裂变产物通过反冲和扩散方式的产生机理,通过求解迁移方程得到稳态情况下裂变产物活度的解析解。基于最小二乘法对反冲释放和扩散释放的裂变产物释放产生比进行解谱,建立了诊断压水堆燃料棒破损时间、破口程度、锕系核素泄漏、燃耗和燃料批次的定量分析模型。采用某百万千瓦压水堆运行中发生二次氢化的燃料循环的冷却剂裂变产物监测数据进行了验证,理论模型的分析结果也与机组停堆后啜漏检查和热室检查结果相符。     

基于线性核素链的燃耗算法与蒙特卡罗程序耦合计算

根据线性核素链原理和反应堆燃耗的特点,建立相应核数据库并采用回溯算法生成自适应核素链,完成核素的遍历和计算,形成多群点燃耗计算程序,能够独立进行燃耗计算并具有完整的输出结果形式。同时将所开发的燃耗计算程序与蒙特卡罗程序进行耦合,完成接口模块的设计,形成可用于研究堆和核电站的燃耗-输运耦合计算工具。将所开发的输运-耦合计算程序应用于中国实验快堆首炉堆芯燃耗的计算,将计算结果与现有设计数据进行比较。经过初步分析表明:新的燃耗计算程序能够精确计算锕系核素含量,包括易裂变核素和生成量很小的次锕系核素。对某些锕系核素如Pu241的计算结果还存在较大偏差,这需要对计算结果进一步分析,来确认偏差是来自计算过程还是相关的截面数据。整个燃耗-输运耦合计算系统对裂变产物的处理和反应性变化的计算也与现有的设计数据符合良好。     

中子诱发232Th裂变初始碎片质量及动能分布Monte-Carlo研究

随着第四代反应堆以及先进核能利用系统的发展,对中子核数据提出了高精度、多核素、宽能区的新要求.目前,中国核数据评价库(CENDL库)中相关核裂变的数据较缺失,不足以满足当前核能发展的需求.因此,建立面向中子核数据需求的可靠计算方法和工具变得极为重要.本文基于Monte-Carlo方法建立了裂变碎片质量动能计算模型,研究了中低能中子诱发²³²Th(n,f)反应发射中子前裂变碎片的分布特性.对于裂变碎片质量分布,本模型计算结果与实验值最大偏差约1%,与GEF, TALYS程序计算结果 (与实验值最大偏差约2%)相比具有一定优势.对于发射中子前裂变碎片动能分布,本模型计算结果与实验数据一致.结果表明,所发展的计算模型能够较好地预测²³²Th(n,f)反应发射中子前裂变碎片数据,为中子诱发锕系核裂变反应计算提供一种新思路.     

断前粒子发射的同位素效应

用推广的裂变扩散模型研究了²⁸Si+^164,167,170Er→^192,195,198Pb反应中测量的断前中子、质子和α粒子多重性的激发函数.发现扩散模型能很好地拟合这些轻粒子多重性随裂变系统激发能和Pb同位素的变化趋势.表明断前粒子发射存在一个同位素效应.进而在一个考虑了裂变过程中摩擦效应的统计模型的框架内,在In和Er这两个元素的同位素链中,考察了同位素效应与裂变碎片质量不对称性和裂变系统尺度的关系.计算结果表明:同位素效应的存在不依赖于裂变系统的大小和不对称性.此外,当裂变系统具有高的中质比时,轻带电粒子发射将不再敏感于裂变延迟时间的长短,而中子发射则非常敏感.这个结果暗示对那些特别丰中子的裂变系统,轻带电粒子(质子和α粒子)的多重性对于研究热核裂变过程中的摩擦强度不是一个好的探针.     

裂变路径对断点前粒子发射的影响

用扩散模型研究了裂变系统从鞍点到断点的时间演化, 以及在此间的粒子发射与鞍点前粒子发射的比随着裂变系统质量的变化. 解释了实验上发现的断点前粒子多重性随裂变碎片质量不对称性的变化趋势. 结果表明上述两种变化趋势都可以归因于裂变演化路程长短的影响.     

原子核裂变的宏观模型计算

用密度可变的连续介质模型计算了A≥100区域β稳定核宏观位能曲面,得到了合理的裂变位垒高度,预言了鞍点态裂变核电荷的双重心分布.     

Multi-modal analysis for low energy neutron-induced fission of ~(235)U

Low energy neutron induced fission of ~(235)U is studied in the framework of the multi-modal fission model. The fission fragment properties, such as the yields, the average total kinetic energy distribution and the average neutron separation energy, are investigated for incident neutron energies from thermal to 6.0 MeV. The multi-modal fission approach is also used to evaluate the prompt fission neutron multiplicity and spectra for the neutron-induced fission of ~(235)U with an improved version of the Los Alamos model for incident neutrons below the (n, nf) threshold. The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental data. The calculated results are in good agreement with the experimental data.     

中子与裂变核238U反应双微分截面的理论分析

根据中子与原子核U及其同位素反应的总截面,去弹性散射截面和弹性散射角分布的实验数据,获得了入射中子能量0.1—20MeV的一组普适中子与U及其同位素反应的光学模型势参数.应用光学模型,核裂变理论,耦合道理论,扭曲波玻恩近似理论,宽度涨落修正的Hauser-Feshbach理论和预平衡反应的激子模型,计算和分析了中子与²³⁸U反应的所有截面、角分布、能谱和双微分截面.理论计算与实验数据进行了分析比较     

质子与裂变核238U反应的理论计算

利用球型光学模型、耦合道理论、核内级联、激子模型、蒸发模型、带宽度涨落修正的Hauser-Feshbach模型,Bohr-Wheeler裂变理论,对入射能量从阈能到200 MeV的p+²³⁸U各种反应进行了计算,计算结果和实验符合较好.     

Systematics on fission fragment mass distribution of neutron induced 235U fission

Based on the neutron induced fission fragment mass distribution data up to     

Dynamical approach to calculating angular distributions of fission fragments

A dynamical approach is proposed for calculating the angular distributions of fission fragments. The relaxation time for the degree of freedom associated with the projection of the total angular momentum of the nuclear system onto the symmetry axis and the coefficient of damping of the fission mode are the basic parameters of this approach. Experimental data on the anisotropy of the angular distributions of fission fragments and on the multiplicities of prescission neutrons are analyzed within the proposed model for ¹⁶O+²⁰⁸Pb (E _lab=110–148 MeV), ¹⁶O+²³²Th (120–160 MeV), ¹⁶O+²⁴⁸Cm (110–148 MeV), and ¹⁶O+²³⁸U (96–148 MeV). The relaxation time and the damping coefficient are estimated at τ_K=(5–6)×10^?21 s and β=4×10²¹ s^?1, respectively.     

p+209Bi核反应微观数据的理论计算

利用光学模型、激光模型、蒸发模型及扭曲波玻恩近似理论,对入射能量从阈能到300MeV,p+²⁰⁹Bi的中子反应截面、剩余核截面、出射粒子的多重数进行了理论计算及分析,并将计算结果与实验数据进行了比较.同时得到一组能量到50?0MeV与实验数据符合很好的光学势参数.     

Angular momentum effect in prescission particle multiplicities for a light system by diffusion model

The effect of angular momentum on the competition between fission and particle emission during light system fission process was studied via fission diffusion model. The prescission particle multiplicities were found to increase with decreasing angular momentum. The experimental prescission proton and α particle multiplicities can be fitted for 10.6 MeV/nucleon ⁸⁴Kr(²⁷Al,binary fission) reaction with this model. Entrance channel effect found in [1] is proved to be angular momentum effect.     

Deformation parameter changes in fission mass yields within the systematic statistical scission-point model

The fission fragment mass-yields are evaluated for pre-actinide and actinide isotopes using a systematic statistical scission point model. The total potential energy of the fissioning systems at the scission point is presented in approximate relations as functions of mass numbers,deformation parameters and the temperature of complementary fission fragments. The collective temperature, Tcoll, and the temperature of fission fragments, Ti, are separated and the effect of collective temperature on mass yields results is investigated. The fragment temperature has been calculated with the generalized superfluid model. The sum of deformation parameters of complementary fission fragments has been obtained by fitting the calculated results with the experimental data. To investigate the transitions between symmetric and asymmetric modes mass yields for pre-actinide and heavy actinides are calculated with this model. The transition from asymmetric to symmetric fission is well reproduced using this systematic statistical scission point model. The calculated results are in good agreement with the experimental data with Tcoll= 2 Me V at intermediate excitation energy and with T_(coll)= 1MeV for spontaneous fission.Despite the Langevin model, in the scission point model, a constraint on the deformation parameters of fission fragments has little effect on the results of the mass yield.