核壳结构CdS/ZnS纳米微粒的制备与光学特性

用微乳液法制备CdS纳米微粒 ,以ZnS对其进行表面修饰 ,得到具有核壳结构的CdS/ZnS纳米微粒 .采用X射线衍射 (XRD)、透射电镜 (TEM )表征其结构、粒度和形貌 ,紫外 可见吸收光谱 (UV)、光致发光光谱(PL)表征其光学特性 .制得的CdS近似呈球形 ,直径为 3.3nm ;以XRD和UV证实了CdS/ZnS核壳结构的实现 .研究了不同ZnS壳层厚度对CdS纳米微粒光学性能的影响 ,UV谱表明随着壳层厚度的增加纳米微粒的吸收带边有轻微的红移 ,同时短波吸收增强 ;PL谱表明壳层ZnS的包覆可减少CdS纳米微粒的表面缺陷 ,带边直接复合发光的几率增大 ,具有合适的壳层厚度时发光效率大大提高 .     

单核/双壳结构CdSe/CdS/ZnS纳米晶的合成与发光性质

以巯基乙酸为稳定剂,在水溶液中合成了单核/双壳结构的CdSe/CdS/ZnS纳米晶。在内核CdSe和外壳ZnS之间的内壳CdS作为晶格匹配调节层,能够很好的改善核/壳界面处的性能,而且,最外层ZnS能够最大程度地使激子受限。用TEM和XPS对纳米晶进行了表征,并且用光致发光光谱和吸收光谱对不同核壳结构的纳米晶的发光性能进行了比较,结果表明单核/双壳结构的纳米晶具有更加优异的发光特性。     

CdTe,核 壳型CdTe/CdS及CdTe/ZnS量子点的合成及表征

在水相中制备了半导体CdTe纳米晶,核 壳型CdTe/CdS和CdTe/ZnS纳米晶（即量子点;QDs）.利用扫描隧道显微镜（STM）和荧光光谱(FS)对合成的纳米晶量子点进行了研究,并且根据FS的数据进行了量子效率的计算.STM的结果表明合成的量子点直径约为3 nm并且分布良好.为了提高量子效率,对Cd2+浓度和Cd2+∶S2－比例等反应条件进行了研究,结果表明随着回流时间的增加,核 壳型量子点CdTe/CdS的量子效率总体上呈下降趋势.CdTe/CdS在pH8.5,Cd2+∶S2－=10∶1（摩尔比）时可获得80.0%的最大量子效率.同时制备了核 壳型量子点CdTe/ZnS,其最大发射波长由551 nm（CdTe）红移到635 nm（CdTe/ZnS）表明量子点的尺寸在增长,但是量子效率下降到14.4%. 当前研究的量子点可适用于生物标记,生物成像,以及基于共振能量转移的生物传感研究.     

CdTe/CdO nH2O核壳纳米复合粒子的水相合成及光学特性.

"研究了CdTe/CdO?nH2O核壳纳米复合物的水相合成及其光学特性． 以巯基乙酸为稳定剂通过氯化镉和碲氢化钠反应制备了碲化镉纳米晶． 在反应过程中, 反应前驱溶液中镉离子与碲离子的摩尔浓度比对最终制备的碲化镉纳米晶的荧光强度起到了极其重要的作用． 在pH值为8.2, 镉离子与碲离子摩尔浓度比为4.0的情况下,制备出了具有最强荧光强度的碲化镉量子点．之后,CdTe/CdO?nH2O核壳纳米复合物在水相中制备出来．在适当的氢氧化镉沉积在碲化镉纳米粒子表面后,碲化镉量子点的荧光大大增强．所制备的CdTe/C     

谷胱甘肽包被的CdSe/CdS量子点的直接水相制备及其对人血淋巴细胞的标记成像

首次用谷胱甘肽(GSH)作为稳定剂,在水溶液中制备了稳定地发射绿色荧光和橙色荧光的两种 CdSe/CdS核/壳结构的纳米量子点。用紫外-可见分光光度和荧光光谱方法研究了CdSe/CdS量子点的发光特性。透射电镜(TEM)结果表明CdSe/CdS量子点近似球形,在水中分散性良好,比CdSe量子点具有更优异的发光特性,发射光谱和吸收光谱都有红移现象。将CdSe/CdS量子点与鼠抗人CD3抗体连接,制备了水溶性CdSe/CdS-CD3复合物探针,对人血淋巴细胞进行标记和成像。结果表明用该探针对人血淋巴细胞成像清晰,其荧光在30 min的连续蓝光激发下无明显衰退,而FITC荧光在20 min内基本完全猝灭。     

CdSe/CdS核壳纳米晶微波水热法一步合成与发光光谱分析

采用微波水热法一步合成了核壳结构的CdSe/CdS纳米晶,讨论了巯基丙酸中S^2-的释放过程对纳米晶生长的影响。XRD和Raman光谱结果表明,140℃合成温度下获得了CdSe/CdS核壳结构的纳米晶。FTIR光谱结果表明,巯基丙酸随时间的分解有助于CdS壳层的形成。PL光谱呈现出CdSe纳米晶的带间发射和缺陷发射,随着核壳结构的形成,CdSe纳米晶的表面缺陷被抑制,相关的荧光发射减弱。     

低强度飞秒激光激发下CdTe和CdTe/CdS核壳量子点的荧光上转换研究

利用400 nm和800 nm不同波长的低强度飞秒激光,对CdTe和CdTe/CdS核壳量子点溶胶进行激发,研究其稳态和时间分辨荧光性质.800 nm飞秒激光激发下,CdTe和CdTe/CdS核壳量子点产生上转换发光现象,上转换荧光峰与400 nm激发下的荧光峰相比蓝移最多达15 nm,而且蓝移值与荧光量子产率有关.变功率激发确认激发光功率与上转换荧光强度间满足二次方关系,时间分辨荧光的研究表明荧光动力学曲线服从双e指数衰减.提出表面态辅助的双光子吸收模型是低激发强度上转换发光的主要机理.CdTe和CdT 关键词： CdTe量子点 CdTe/CdS核壳量子点 时间分辨荧光 上转换荧光     

CdTe/CdS核壳结构量子点超快载流子动力学

在水相合成CdTe以及CdTe/CdS核壳结构量子点基础上, 利用基于抽运-探测技术的瞬态差分透射技术研究了CdTe量子点以及不同CdS壳层厚度的CdTe/CdS量子点的最低激子能态的超快激发与弛豫动力学. 研究表明:相比于CdTe,CdTe/CdS量子点的电子空穴由于空间分离,其所需的激发时间要长于电子空穴空间重叠态所需要的激发时间.随着壳层厚度的增加, 量子点表面的钝化有效地减少了表面态相关弛豫机理,并延长相对应的弛豫时间.     

CdSe/ZnSe核-壳结构纳米粒子合成新方法

报道用“一步”合成新方法制备了CdSe/ZnSe核-壳结构的发光纳米粒子.该方法是将锌的前驱体注入表面Se富集的CdSe发光纳米粒子溶液中,通过Zn²⁺与Se共价键结合,从而在CdSe发光纳米粒子的表面形成ZnSe壳.分别通过X射线粉末衍射、光电子能谱、透射电镜、紫外-可见吸收光谱和光致发光光谱,对核-壳结构的发光纳米粒子的结构及光学性质进行了表征.结果表明,以较宽带隙的ZnSe在较窄带隙的CdSe纳米粒子表面形成的壳层有效地钝化了CdSe纳米粒子的表面缺陷,明显地提高了室温下CdSe纳米粒子的光致发光效率.X射线粉末衍射表明随着Zn²⁺的不断注入,CdSe/ZnSe的衍射峰逐渐移向ZnSe衍射峰.光电子能谱数据显示,Zn2p的双峰分别位于1020,1040eV附近,通过与体材料ZnO相比,确定为Zn²⁺的光电子发射,说明Zn是以共价键形式存在于CdSe纳米粒子的表面.透射电镜照片显示纳米粒子具有良好的单分散性,核-壳结构的发光纳米粒子直径较CdSe核的直径明显增加.     

SiO_2/Ag核壳结构纳米粒子的制备及其表面荧光增强

以罗丹明B掺杂的SiO2球为核,通过化学还原的方法制备了二氧化硅/银核壳结构复合纳米粒子。采用透射电镜(TEM)、紫外-可见-近红外(UV-Vis-NIR)分光光度计和荧光分光光度计对二氧化硅/银核壳结构纳米粒子的表面形貌、表面等离子共振和表面荧光增强特性进行了研究和表征。结果表明,二氧化硅/银核壳结构纳米粒子的表面等离子共振峰具有明显的可调谐性,且其表面荧光增强强烈依赖于银壳层的表面等离子共振,随银壳层厚度的增大而增强。     

Anti-Reflection Characteristics of Si Nanowires for Enhanced Photoluminescence from CdTe/CdS Quantum Dots

CdTe/CdS quantum dots(QDs) are fabricated on Si nanowires(NWs) substrates with and without Au nanoparticles(NPs). The formation of Au NPs on Si NWs can be certified as shown in scanning electron microscopy images. The optical properties of samples are also investigated. It is interesting to find that the photoluminescence(PL) intensity of Cd Te/Cd S QD films on Si nanowire substrates with Au NPs is significantly increased,which can reach 8-fold higher than that of samples on planar Si without Au NPs. The results of finite-difference time-domain simulation indicate that Au NPs induce stronger localization of electric field and then boost the PL intensity of QDs nearby. Furthermore, the time-resolved luminescence decay curve shows the PL lifetime, which is about 5.5 ns at the emission peaks of QD films on planar, increasing from 1.8 ns of QD films on Si NWs to4.7 ns after introducing Au NPs into Si NWs.     

Characterization of semiconductor core-shell nanoparticles by resonant Raman scattering and photoluminescence spectroscopy

Colloidal CdSe nanoparticles (NPs), passivated with CdS and ZnS, were characterized by resonant Raman scattering and photoluminescence (PL). The effect of the passivating shell, its volume and formation procedure on optical and vibrational spectra is discussed. Analyzing the Raman peaks due to optical phonons inside the core and those related to the core-shell interface allows some understanding of the relation between the core-shell structure and its PL properties to be achieved. In particular, a compositional intermixing at the core/shell interface of the NPs was deduced from the Raman spectra, which can noticeably affect their PL intensity.     

Cell labeling and cytotoxicity of aqueously synthesized CdTe/CdS/ZnS core–shell–shell quantum dots by a water bath-hydrothermal method

CdTe/CdS/ZnS core–shell–shell quantum dots (QDs) were synthesized in aqueous solution via water-bathing combined hydrothermal method using L-cysteine as a stabilizer. The present method features markedly reduced synthesis time, higher fluorescent intensity and lower cytotoxicity of the QDs. Structural and spectroscopic properties of core–shell–shell QDs are well characterized by absorption and fluorescence spectroscopy, X-ray diffraction, transmission electron microscopy, and fourier transform infrared spectroscopy. Both CdS and ZnS shells were capped on the CdTe core and the fluorescence was greatly enhanced by the ZnS coating. The ternary QDs conjugated with transferrins were successfully employed for the biolabeling and fluorescent imaging of HeLa cells. Cytotoxicity evaluation shows that CdTe/CdS/ZnS was less toxic for cells than CdTe and CdTe/CdS due to the presence of a ZnS coating on surface, which inhibited the release of cadmium ions.     

Au纳米颗粒和CdTe量子点复合体系发光增强和猝灭效应

利用金属蒸发真空多弧离子源注入机, 将Au离子注入到高纯石英玻璃来制备镶嵌有Au 纳米颗粒的衬底材料, 随后将化学方法合成的CdTe量子点旋涂在玻璃衬底上制备了Au纳米颗粒和CdTe量子点复合体系. 通过对镶嵌有Au纳米颗粒的衬底进行热退火处理来控制Au纳米颗粒的生长和分布, 系统研究了Au纳米颗粒的局域表面等离子体共振对CdTe量子点光致发光性能的影响. 利用光学吸收谱、原子力显微镜、透射电子显微镜和光致发光谱对样品进行了表征和测试. 光致发光谱表明, Au纳米颗粒的局域表面等离子体对CdTe量子点的发光有增强效应也有猝灭效应. 深入分析了Au纳米颗粒和CdTe量子点之间的相互作用过程, 提出了关于Au-CdTe 纳米复合体系中CdTe 发光增强和猝灭的新机理. 该实验结果为利用金属纳米颗粒表面等离子体技术制备高发光性能的光电子器件提供了较好的参考.     

Facile synthesis of mercaptosuccinic acid-capped CdTe/CdS/ZnS core/double shell quantum dots with improved cell viability on different cancer cells and normal cells

Water-soluble, mercaptosuccinic acid (MSA)-capped CdTe/CdS/ZnS core/double shell quantum dots (QDs) were prepared by successive growth of CdS and ZnS shells on the as-synthesized CdTe/CdS_thin core/shell quantum dots. The formation of core/double shell structured QDs was investigated by ultraviolet-visible (UV–Vis) absorption and photoluminescence (PL) spectroscopy, PL decay studies, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The core/double shell QDs exhibited good photoluminescence quantum yield (PLQY) which is 70% higher than that of the parent core/shell QDs, and they are stable for months. The average particle size of the core/double shell QDs was ～3 nm as calculated from the transmission electron microscope (TEM) images. The cytotoxicity of the QDs was evaluated on a variety of cancer cells such as HeLa, MCF-7, A549, and normal Vero cells by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) cell viability assay. The results showed that core/double shell QDs were less toxic to the cells when compared to the parent core/shell QDs. MCF-7 cells showed proliferation on incubation with QDs, and this is attributed to the metalloestrogenic activity of cadmium ions released from QDs. The core/double shell CdTe/CdS/ZnS (CSS) QDs were conjugated with transferrin and successfully employed for the biolabeling and fluorescent imaging of HeLa cells. These core/double shell QDs are highly promising fluorescent probe for cancer cell labeling and imaging applications.     

Photoluminescence properties of a novel conjugate of water-soluble CdTe quantum dots to guanine

A novel conjugate of water-soluble CdTe quantum dots to a small biomolecule guanine has been obtained in aqueous phase. The photoluminescence property and the stability of the conjugate increased comparing to CdTe QDs. The interaction between CdTe QDs and guanine was studied by TEM, fluorescence microscope and photoluminescence (PL), IR, UV-Vis spectra. The effects of reflux time, pH value, ionic strength, and the ratio of CdTe QDs to guanine on the photoluminescence properties of conjugate were investigated in detail. The results show that guanine has a great influence on both the photoluminescence property and stability of thioglycolic acid-stabilized CdTe QDs. The formation of coordination and hydrogen bond between guanine molecules and CdTe including thioglycolic acid on its surface may effectively enhance the PL intensity and stability of CdTe QDs. The maximum PL intensity of the conjugate was obtained on the condition with lower ionic strength, less than 30 min reflux time, neutral pH value and 6/1 as molar ratio of guanine to CdTe.     

Interface photoluminescence of the SnO2:F/CdS:In/CdTe thin film solar cells prepared partially by the spray pyrolysis technique

CdS/CdTe solar cells were built by depositing a 200 nm layer of SnO₂:F on glass substrates by the spray pyrolysis (SP) technique, a 500 nm CdS:In layer by the same technique and a 1–1.5 μm CdTe layer by vacuum evaporation. The cells were CdCl₂ heat-treated in nitrogen atmosphere for 30 min at 350 °C. The photoluminescence (PL) spectra were measured at the CdS/CdTe interface for two cells with different values of the CdTe layer's thickness at the temperature T=60 K. A deconvolution peak fit was performed from which it is found that the peaks are characteristic of the solid solution CdS_xTe_1?x. The parabolic relation that relates the bandgap energy with the composition was used to estimate x, where x is [S]/([Te]+[S]) and [Te], [S] are the concentrations of Te and S atoms, respectively. The results show that the interface is smooth and the change of the bandgap occurs gradually. The solar cell of the thicker CdTe layer showed more interdiffusion at the CdS/CdTe interface and better photovoltaic characteristics.     

Surface-defect-states photoluminescence in CdS nanocrystals prepared by one-step aqueous synthesis method

CdS nanocrystals were prepared by a simple one-step aqueous synthesis method using thioglycolic acid (TGA) as the capping molecule, and characterized by X-ray powder diffraction (XRD), UV-vis absorption spectra and photoluminescence (PL) emission spectroscopy. The effects of both TGA/Cd and Cd/S molar ratio on the surface-defect-state PL intensity of CdS nanocrystals have been investigated. It was found that all of the as-prepared CdS nanocrystals showed a strong broad emission in the range of 450-700 nm centered at 560 nm, which was attributed to the recombination of an electron trapped in a sulfur vacancy with a hole in the valance band of CdS. The surface-defect-states emission intensity of CdS nanocrystals significantly increased with the increase of Cd/S molar ratio, and showed a maximum when Cd/S molar ratio was 2.0. If Cd/S molar ratio continued to increase, namely more than 2.0, the surface-defect-states emission intensity would decrease. It was found that the surface-defect-states emission intensity increased with the increase the TGA/Cd molar ratio, and showed a maximum when the TGA/Cd molar ratio was equal to 1.8, and a further increase of the TGA/Cd molar ratio would lead to the decrease of the surface-defect-states emission intensity.