Cell labeling and cytotoxicity of aqueously synthesized CdTe/CdS/ZnS core–shell–shell quantum dots by a water bath-hydrothermal method

CdTe/CdS/ZnS core–shell–shell quantum dots (QDs) were synthesized in aqueous solution via water-bathing combined hydrothermal method using L-cysteine as a stabilizer. The present method features markedly reduced synthesis time, higher fluorescent intensity and lower cytotoxicity of the QDs. Structural and spectroscopic properties of core–shell–shell QDs are well characterized by absorption and fluorescence spectroscopy, X-ray diffraction, transmission electron microscopy, and fourier transform infrared spectroscopy. Both CdS and ZnS shells were capped on the CdTe core and the fluorescence was greatly enhanced by the ZnS coating. The ternary QDs conjugated with transferrins were successfully employed for the biolabeling and fluorescent imaging of HeLa cells. Cytotoxicity evaluation shows that CdTe/CdS/ZnS was less toxic for cells than CdTe and CdTe/CdS due to the presence of a ZnS coating on surface, which inhibited the release of cadmium ions.     

Preparation of water-soluble CdTe/CdS core/shell quantum dots with enhanced photostability

CdTe/CdS core/shell quantum dots (QDs) have been synthesized in an aqueous phase using thioacetamide as a sulfur source. The quantum yield was greatly enhanced by the epitaxial growth of a CdS shell, which was confirmed by X-ray photoelectron spectroscopy (XPS) results. The quantum yield of as-prepared CdTe/CdS core/shell QDs without any post-preparative processing reached 58%. The experimental results illustrate that the QDs with core/shell structure show better photostability than thioglycolic acid (TGA)-capped CdTe QDs. The cyclic voltammograms reveal higher oxidation potentials for CdTe/CdS core/shell QDs than for TGA-capped CdTe QDs, which explains the superior photostability of QDs with a core/shell structure. This enhanced photostability makes these QDs with core/shell structure more suitable for bio-labeling and imaging.     

CdTe/CdS核壳结构量子点超快载流子动力学

在水相合成CdTe以及CdTe/CdS核壳结构量子点基础上, 利用基于抽运-探测技术的瞬态差分透射技术研究了CdTe量子点以及不同CdS壳层厚度的CdTe/CdS量子点的最低激子能态的超快激发与弛豫动力学. 研究表明:相比于CdTe,CdTe/CdS量子点的电子空穴由于空间分离,其所需的激发时间要长于电子空穴空间重叠态所需要的激发时间.随着壳层厚度的增加, 量子点表面的钝化有效地减少了表面态相关弛豫机理,并延长相对应的弛豫时间.     

Photoluminescence quenching of CdTe/CdS core-shell quantum dots in aqueous solution by ZnO nanocrystals

Photoluminescence (PL) properties of 3-mercaptopropionic acid (MPA) coated CdTe/CdS core-shell quantum dots (QDs) in aqueous solution in the presence of ZnO colloidal nanocrystals were studied by steady-state and time-resolved PL spectroscopy. The PL quenching of CdTe/CdS core-shell QDs with addition of purified ZnO nanocrystals resulted in a decrease in PL lifetime and a small red shift of the PL band. It was found that CdTe(1.5 nm)/CdS type II core-shell QDs exhibited higher efficiency of PL quenching than the CdTe(3.0 nm)/CdS type I core-shell QDs, indicating an electron transfer process from CdTe/CdS core-shell QDs to ZnO nanocrystals. The experimental results indicated that the efficient electron transfer process from CdTe/CdS core-shell QDs to ZnO nanocrystals could be controlled by changing the CdTe core size on the basis of the quantum confinement effect.     

Shell-dependent hole transport in highly luminescent CdSe-core CdS/ZnCdS/ZnS multi-shell nanocrystals

The photoinduced hole transfer dynamics from CdSe quantum dots (QDs), shelled with ZnS or CdS/CdZnS/ZnS layers, to organic hole transporting materials (HTMs) is investigated by absorption, steady-state and time-resolved photoluminescence (PL) spectroscopy. The PL intensity and lifetime of the QDs are dramatically quenched when HTMs are added into the dilute QD solution. The quenching efficiency of the QDs significantly decreases with increasing the shell thickness and increases with decreasing the oxidation potential of the HTMs. These facts are correlated with the photoinduced hole transfer from the QDs to the HTMs. The above results are helpful in understanding the photoexcitation dynamics-related phenomena of organic molecule conjugated nano-object.     

水溶性CdTe/CdS纳米晶表面SiO2壳层的反相胶束法包覆

"提出了一种水相中制备CdTe/CdS核壳结构纳米粒子的方法.用Te粉作为碲源,用Na2S作为硫源,在50 ℃下制备了CdTe/CdS核壳结构纳米粒子. 用紫外可见吸收光谱和荧光光谱分析了CdS壳层对CdTe核的影响. 随CdS壳层厚度的增加,紫外可见吸收光谱和荧光光谱均发生了红移. CdS壳层厚度较薄时,CdTe/CdS纳米晶的荧光强度较CdTe纳米粒子有显著提高;而CdS壳层厚度较厚时,CdTe/CdS纳米晶的荧光强度会逐渐降低. 用反相胶束法在CdTe/CdS核壳结构纳米粒子的表面包被一层SiO2,     

Temperature-dependent photoluminescence of CuInS2 quantum dots

Temperature-dependent photoluminescence (PL) spectroscopy of CuInS₂ core and CuInS₂/ZnS core–shell quantum dots (QDs) was studied for understanding the influence of a ZnS shell on the PL mechanism. The PL quantum yield and lifetime of CuInS₂ core QDs were significantly enhanced after the QD surface was coated with the ZnS shell. The temperature dependences of the PL energy, linewidth, and intensity for the core and core–shell QDs were studied in the temperature range from 92 to 287 K. The temperature-dependent shifts of 98 meV and 35 meV for the PL energies of the QDs were much larger than those of the excitons in their bulk semiconductors. It was surprisingly found that the core and core–shell QDs exhibited a similar temperature dependence of the PL intensity. The PL in the CuInS₂/ZnS core–shell QDs was suggested to originate from recombination of many kinds of defect-related emission centers in the interior of the cores.     

Photoluminescence Characteristics of ZnCuInS-ZnS Core-Shell Semiconductor Nanocrystals

The photoluminescence(PL) characteristics of ZnCuInS quantum dots(QDs) with varying ZnS shell thicknesses of 0, 0.5, and 1.5 layers are investigated systemically by time-correlated single-photon counting measurements and temperature-dependent PL measurements. The results show that a ZnS shell thickness of 1.5 layers can effectively improve the PL quantum yield in one order of magnitude by depressing the surface trapping states of the core ZnCuInS QDs at room temperature. However, the PL measurements at the elevated temperature reveal that the core-shell nanocrystals remain temperature-sensitive with respect to their relatively thin shells.The temperature sensitivity of these small-sized single-layered core-shell nanocrystals may find applications as effective thermometers for the in vivo detection of biological reactions within cells.     

ZnO/ZnS核-壳量子点的双光子吸收效应

利用飞秒激光Z-扫描与泵浦-探测技术,研究了室温下ZnO/ZnS与ZnO/ZnS/Ag核-壳胶体量子点的双光子吸收效应.研究发现:ZnO基核-壳量子点的本征双光子吸收系数比ZnO体材料增大了3个数量级;测量得到的660 nm处的ZnO/ZnS核-壳量子点双光子吸收截面约为4.3×10^-44 cm⁴·s·photon^-1,比相应的ZnS、ZnSe及 CdS量子点大2个数量级;当ZnO/ZnS核-壳量子点镶嵌了银纳米点时,非线性吸收有所增强.ZnO基复合纳米结构的双光子吸收增强可归因于量子限域与局域场效应.     

Energy transfer dynamics between Alq3 and CdTeS/ZnS core shell nanocrystals

The photoluminescence (PL) properties of the guest-host films, using CdTeS/ZnS core shell quantum dots (QDs) as the guest and organic small-molecule material Alq₃ as the host, are studied by steady-state and time-resolved PL spectroscopy. Both the relative intensity and the PL lifetime are intensively dependent on the weight ratio of Alq₃ and CdTeS/ZnS QDs. The detailed analysis provides clear evidence for a Förster energy transfer from Alq₃ host to QDs guest, based on the nonradiative resonant transfer mechanism. The results are relevant to the application of hybrid organic/inorganic systems to OLEDs.     

CdSe/ZnSe/ZnS多壳层结构量子点的制备与表征

展示了一种简捷的多壳层量子点合成路线。在含有过量Se源的CdSe体系中直接注入Zn源,"一步法"合成了CdSe/ZnSe量子点;进一步以CdSe/ZnSe为"核",表面外延生长ZnS壳层制备了核/壳/壳结构CdSe/ZnSe/ZnS量子点。相对于以往报道的多壳层结构量子点的制备方法,该方法通过减少壳层的生长步骤有效地简化了实验操作,缩短了实验周期,同时减少对原料的损耗。对量子点进行高温退火处理,能够大幅提高CdSe/ZnSe/ZnS量子点的发光量子产率。透射电镜、XRD以及光谱研究表明:所制备的量子点接近球形,核与壳层纳米晶均为闪锌矿结构,最终获得的CdSe/ZnSe/ZnS量子点的光致发光量子产率达到53％。为了实现量子点的表面生物功能化,通过巯基酸进行了表面配体交换修饰,使量子点表面具有水溶性的羧基功能团,并且能够维持较高的光致发光量子产率。     

CdTe,核 壳型CdTe/CdS及CdTe/ZnS量子点的合成及表征

在水相中制备了半导体CdTe纳米晶,核 壳型CdTe/CdS和CdTe/ZnS纳米晶（即量子点;QDs）.利用扫描隧道显微镜（STM）和荧光光谱(FS)对合成的纳米晶量子点进行了研究,并且根据FS的数据进行了量子效率的计算.STM的结果表明合成的量子点直径约为3 nm并且分布良好.为了提高量子效率,对Cd2+浓度和Cd2+∶S2－比例等反应条件进行了研究,结果表明随着回流时间的增加,核 壳型量子点CdTe/CdS的量子效率总体上呈下降趋势.CdTe/CdS在pH8.5,Cd2+∶S2－=10∶1（摩尔比）时可获得80.0%的最大量子效率.同时制备了核 壳型量子点CdTe/ZnS,其最大发射波长由551 nm（CdTe）红移到635 nm（CdTe/ZnS）表明量子点的尺寸在增长,但是量子效率下降到14.4%. 当前研究的量子点可适用于生物标记,生物成像,以及基于共振能量转移的生物传感研究.     

Photostability comparison of CdTe and CdSe/CdS/ZnS quantum dots in living cells under single and two-photon excitations

The photostability is an outstanding feature of quantum dots (QDs) used as fluorescence probes in biological staining and cell imaging. To find out the related factors in the QD photostability, the photobleaching of naked CdTe QDs and BSA coated CdSe/CdS/ZnS QDs in human hepatocellular carcinoma (QGY) cells and human nasopharynx carcinoma (KB) cells were studied under single photon excitation (SPE) and two-photon excitation (TPE). In these two cell lines the cellular QDs were irradiated by a 405 nm continuous wave laser for SPE or an 800 nm femto-second (fs) laser for TPE. The QD photobleaching with the irradiation time was found to fit a biexponential decay. The fast decay plays a dominant role in the bleaching course and thus can be used as the parameter to quantitatively evaluate the QD photostability. The TPE decreased the QD photobleaching as compared to SPE. The BSA coated core/shell QDs had improved the photostability up to 4-5 times than the naked QDs due to the shielding effect of the QD shell. Therefore, it is better to use core/shell structured QDs as the fluorescence probe combining with a TPE manner for those long-term monitoring studies.     

Surface-Modified Colloid CdTe/CdS Quantum Dots by a Biocompatible Thiazolidine Derivative as Promising Platform for Immobilization of Glucose Oxidase: Application to Fluorescence Sensing of Glucose

Journal of Fluorescence - This work focuses on the synthesis of novel modified core–shell CdTe/CdS quantum dots (QDs) and develops as a fluorescence sensor for glucose determination. The...     

Microwave-Assisted Aqueous Synthesis of Highly Luminescent Carboxymethyl Chitosan-Coated CdTe/CdS Quantum Dots as Fluorescent Probe for Live Cell Imaging

This paper describes the development of a simplified and rapid method for the aqueous synthesis of quantum dots (QDs) with CdTe cores and gradient CdS external shells (CdTe/CdS QDs) aided by microwave irradiation. Several synthesis parameters, such as molar ratio of reagents, pH, reaction temperature, and reaction time, were studied in details. Under the optimized conditions, highly effective CdTe/CdS QDs could be synthesized in aqueous phase in only 15 min. In order to improve the biocompatibility of the CdTe/CdS QDs, these QDs were then interacted with carboxymethyl chitosan (CMC) so as they could be used as fluorescent probes in the aqueous phase. With the incorporation of CMC, the stability of modified QDs was found to have improved significantly (from 4 months to more than 10 months at room temperature). The photoluminescence quantum yield (PLQY) of the modified QDs could reach 75%, other parameters include a full width at half maximum of the emission (FWHM) spectrum as 40 ~ 60 nm, and an average size, estimated from electron microscopic images, as 3.5 nm. As fluorescent probes, these modified QDs were successfully used for imaging live Madin–Darby canine kidney (MDCK) cells, in which the preliminary results indicated that these modified QDs demonstrated good biocompatibility and showed promising applications for bio-labeling and imaging.     

HgTe/CdS/ZnS多壳层量子点的制备与表征

采用一种简单的方法合成HgTe/CdS/ZnS多壳层量子点。首先,以1-硫代甘油为稳定剂,在水相溶液中制备出HgTe核量子点;然后,采用外延生长法依次在HgTe核量子点表面包覆CdS和ZnS壳层,合成出最终具有稳定近红外发光的HgTe/CdS/ZnS多壳层量子点。该合成方法仅需3个步骤,具有操作简单、成本低廉的优点。实验结果显示,当反应温度为90 ℃、反应溶液pH为11.0、反应加热回流时间为4 min时,HgTe/CdS/ZnS多壳层量子点具有最高荧光量子产率36%。     

Atomistic tight-binding computations of the structural and optical properties of CdTe/CdX (X=S and Se)/ZnS core/shell/shell nanocrystals

A study of CdTe/CdX (X=S and Se)/ZnS core/shell/shell nanocrystals is carried out using atomistic tight-binding theory and the configuration interaction method to provide information for applications in bioimaging, biolabeling, display devices and near-infrared electronic instruments. The calculations yield the dependences of the internal and external passivated shells on the natural behaviours of CdTe/CdX (X=S and Se)/ZnS core/shell/shell nanocrystals. The reduction of the optical band gaps is observed with increasing numbers of monolayers in the external ZnS shell due to quantum confinement. Interestingly, the optical band gaps of CdTe/CdS/ZnS core/shell/shell nanocrystals are greater than those of CdTe/CdSe/ZnS core/shell/shell nanocrystals. In the presence of an external ZnS-coated shell, electron–hole wave function overlaps, oscillation strengths, ground-state exchange energies and Stokes shift are improved, whereas ground-state coulomb energies and fine-structure splitting are reduced. The oscillation strengths, Stokes shift and fine-structure splitting are reduced with the increase in external ZnS shell thickness. The oscillation strengths, Stokes shift and fine-structure splitting of CdTe/CdS/ZnS core/shell/shell nanocrystals are larger than those of CdTe/CdSe/ZnS core/shell/shell nanocrystals. Reduction of the atomistic electron–hole interactions is observed with increasing external ZnS shell size. The strong electron–hole interactions are more probed in CdTe/CdS/ZnS core/shell/shell nanocrystals than in CdTe/CdSe/ZnS core/shell/shell nanocrystals.     

Development and Investigation of Ultrastable PbS/CdS/ZnS Quantum Dots for Near‐Infrared Tumor Imaging

Achieving bright, reliable, robust, and stable probes for in vivo imaging is becoming extremely urgent for the cancer imaging research community. To date very few works have reported on elucidating in the varied and chemically complex biological milieu. The authors report detailed investigations of the synthesis of near‐infrared, water dispersive, strongly luminescent, and highly stable PbS/CdS/ZnS core/shell/shell quantum dots (QDs). These QDs are extremely stable, they could keep their initial morphology, dispersion status, and photoluminescence (PL) in phosphate buffered saline buffer for as long as 14 months. The QDs also show excellent photostability and could keep ≈80% of their initial PL intensity after 1 h continuous, strong UV illumination. More interestingly, they show negligible toxicity to cultured cells even at high QDs concentration. Given these outstanding properties, the QDs are explored for in vivo, tumor imaging in mice. With one order of magnitude lower QD concentration (0.04 mg mL^–1), significantly weaker laser intensity (0.04 W cm^–2 vs ≈1 W cm^–2), and considerably shorter signal integration time (≤1 ms vs hundreds of ms) as compared to the best reported rare earth doped nanoparticles, the QDs show high emission intensity even at injection depth of ≈2.5 mm.     

Physical reasons of emission transformation in infrared CdSeTe/ZnS quantum dots at bioconjugation

The core/shell CdSeTe/ZnS quantum dots (QDs) with emission at 780–800 nm (1.55–1.60 eV) have been studied by means of photoluminescence (PL) and Raman scattering methods in the nonconjugated state and after conjugation to different antibodies (Ab): (i) mouse monoclonal [8C9] human papilloma virus Ab, anti-HPV 16-E7 Ab, (ii) mouse monoclonal [C1P5] human papilloma virus HPV16 E6+HPV18 E6 Ab, and (iii) pseudo rabies virus (PRV) Ab. The transformations of PL and Raman scattering spectra of QDs, stimulated by conjugated antibodies, have been revealed and discussed.The energy band diagram of core/shell CdSeTe/ZnS QDs has been designed that helps to analyze the PL spectra and their transformations at the bioconjugation. It is shown that the core in CdSeTe/ZnS QDs is complex and including the type II quantum well. The last fact permits to explain the nature of infrared (IR) optical transitions (1.55–1.60 eV) and the high energy PL band (1.88–1.94 eV) in the nonconjugated and bioconjugated QDs. A set of physical reasons has been analyzed with the aim to explain the transformation of PL spectra in bioconjugated QDs. Finally it is shown that two factors are responsible for the PL spectrum transformation at bioconjugation to charged antibodies: (i) the change of energy band profile in QDs and (ii) the shift of QD energy levels in the strong quantum confinement case. The effect of PL spectrum transformation is useful for the study of QD bioconjugation to specific antibodies and can be a powerful technique for early medical diagnostics.     

Re-charging the luminescence states in CdSe/ZnS quantum dots at the conjugation to Osteopontin antibodies

The paper presents the original study of photoluminescence (PL) and Raman scattering spectra of core–shell CdSe/ZnS quantum dots (QDs) covered by the amine-derivatized polyethylene glycol (PEG) with luminescence interface states. First commercially available CdSe/ZnS QDs with emission at 640 nm (1.94 eV) covered by PEG polymer have been studied in nonconjugated states. PL spectra of nonconjugated QDs are characterized by a superposition of PL bands related to exciton emission in a CdSe core and to the hot electron–hole recombination via high energy luminescence states. The study of high energy PL bands in QDs at different temperatures has shown that these PL bands are related to luminescence interface states at the CdSe/ZnS or ZnS/polymer interface. Then CdSe/ZnS QDs have been conjugated with biomolecules—the Osteopontin antibodies. It is revealed that the PL spectrum of bioconjugated QDs changed essentially with decreasing hot electron–hole recombination flow via luminescence interface states. It is shown that the QD bioconjugation process to Osteopontin antibodies is complex and includes the covalent and electrostatic interactions between them. The variation of PL spectra due to the bioconjugation is explained on the basis of electrostatic interaction between the QDs and biomolecule dipoles that stimulates re-charging QD interface states. The study of Raman scattering of bioconjugated CdSe/ZnS QDs has confirmed that the antibody molecules have the electric dipoles. It is shown that CdSe/ZnS QDs with luminescence interface states are promising for the study of bioconjugation effects with specific antibodies and can be a powerful technique in biology and medicine.