聚合物费米型截面阵列波导光栅的优化设计

利用微扰理论给出"等效矩形波导法",分析了费米型截面硅基聚合物阵列波导光栅的传输特性.模拟表明,波导的费米型截面将使阵列波导光栅的传输光谱产生漂移、并使串扰增大.为了消除光谱漂移、减小串扰、实现正常的解复用功能,对阵列波导光栅的结构参量进行了重新优化.结果表明,重新设计的费米型截面聚合物阵列波导光栅的光谱响应和串扰恢复到初始设计的聚合物矩形截面阵列波导光栅的水平.     

阵列波导光栅平坦化的研究

阵列波导光栅的平坦化在实际应用中有很重要的意义.本文系统地研究了阵列波导光栅的平坦化.在输入波导、输出波导、阵列波导输入端与输出端上分别引入了指数型锥形波导.通过改变锥形波导的形状和尺寸来实现平坦化的优化.本文首先从理论上论述了引入指数型锥形波导的输出光谱特性,给出了结构参量的关系表达式,阐明了输入波导处的锥形波导是影响输出光谱平坦化的主要因素,阵列波导和输出波导处的锥形波导对输出光谱的平坦化有一定的影响.其次采用数值模拟的方法模拟了输出光谱,优化了结构参量,总结出了指数型锥形波导对平坦化影响的趋势和规律.模拟结果显示,输出光谱1 dB带宽大于通道间隔的50％,插入损耗从5.2 dB减小到了4.0 dB,串扰小于-30 dB.最后,本文给出了实验结果,插入损耗减小了0.87 dB,串扰减小了3.67 dB,1 dB带宽增加0.1 nm,增加了54.7％.实验结果表明引入指数型锥形波导提高了阵列波导光栅器件的光谱性能.     

阵列波导光栅平坦化的研究

阵列波导光栅的平坦化在实际应用中有很重要的意义.本文系统地研究了阵列波导光栅的平坦化.在输入波导、输出波导、阵列波导输入端与输出端上分别引入了指数型锥形波导.通过改变锥形波导的形状和尺寸来实现平坦化的优化.本文首先从理论上论述了引入指数型锥形波导的输出光谱特性,给出了结构参量的关系表达式,阐明了输入波导处的锥形波导是影响输出光谱平坦化的主要因素,阵列波导和输出波导处的锥形波导对输出光谱的平坦化有一定的影响.其次采用数值模拟的方法模拟了输出光谱,优化了结构参量,总结出了指数型锥形波导对平坦化影响的趋势和规律.模拟结果显示,输出光谱1 dB带宽大于通道间隔的50%,插入损耗从5.2 dB减小到了4.0 dB,串扰小于-30 dB.最后,本文给出了实验结果,插入损耗减小了0.87 dB,串扰减小了3.67 dB,1 dB带宽增加0.1 nm,增加了54.7%.实验结果表明引入指数型锥形波导提高了阵列波导光栅器件的光谱性能.     

InP阵列波导光栅的误差分析

在InP阵列波导光栅的制作过程中会引入不同的误差,从而影响器件的性能.为了最大限度地控制误差,提高半导体器件性能,本文采用传输函数法对InP基阵列波导光栅的系统误差和随机误差分别进行了分析.从系统误差的模拟结果中可以得到如下结论:深脊型波导的有效折射率n_c平均每偏移+0.000 1,中心波长偏移+0.05nm.相邻阵列波导长度差ΔL每偏移+0.01 μm,中心波长将偏移+0.44 nm.n_c和ΔL仅仅会影响到传输谱中心通道及其他各通道对应的波长,使得传输谱发生整体漂移,而信道间隔及串扰不会改变.罗兰圆半径R偏移不会影响器件的中心通道对应的波长,但会使其它通道对应的波长发生变化,最终使得信道间隔改变,R增加50 μm,信道间隔减小0.03 nm.从随机误差模拟结果中,得出:波导芯区折射率、上包层折射率、衬底折射率、波导宽度和波导芯层厚度的随机波动会对阵列波导光栅的串扰产生较大的影响.根据以上分析,可以通过控制不同参量来调节器件的中心波长以及信道间隔等来优化阵列波导光栅的光学性能.     

阵列波导光栅解调系统光电集成中Si纳米线AWG的设计

设计了一种阵列波导光栅解调集成系统中的8通道Si纳米线阵列波导光栅波分复用器。根据材料的折射率设计了单模波导截面尺寸,利用光束传播法对所设计阵列波导光栅进行了模拟。结果表明,器件尺寸为200μm×219μm,远小于目前技术较成熟的硅基SiO2的尺寸,光功率分布符合高斯分布,信道间隔为1.8nm,串扰小于-21dB。对小尺寸AWG的设计具有参考意义。     

聚合物/二氧化硅混合型无热化阵列波导光栅参量的优化

研究一种新型无热化聚合物/二氧化硅混合波导组成的硅基二氧化硅阵列波导光栅.阵列波导光栅对温度的依赖性受波导物质的折射率和波导芯的尺寸影响.通过调节这些参量就可以减小温度对阵列波导光栅的影响.优化得到混合型阵列波导光栅在温度20~70℃范围内波谱漂移小于常规型 AWG结构的5%.     

一种温度不敏感型阵列波导光栅的研究

研究了的一种新型温度不敏感型阵列波导光栅(AWG)。该新型温度不敏感型阵列波导光栅的波导采用混合材料的波导结构，该混合材料波导通过在石英波导芯层上旋涂聚合物材料的上包层，达到改变波导温度特性的目的，使得阵列波导光栅的温度敏感性降低。通过理论分析和有限差分方法研究了其中两种结构：三层混合材料波导构成的阵列波导光栅和四层混合材料波导构成的阵列波导光栅，计算了该新型温度不敏感型阵列波导光栅的温度特性。结果表明，在一定的设计下，温度变化0～50℃时，这两种温度不敏感型阵列波导光栅的最大波长漂移量小于0．03nm，不到无温度控制时常规阵列波导光栅最大波长漂移量的4％。     

49信道绝热低偏振相关全聚合物阵列波导光栅EI北大核心CSCD

研制了一种新型全聚合物49信道绝热低偏振相关阵列波导光栅(AWG)芯片。利用直接紫外光写入技术,实现了波导芯片的设计与制备。利用Matlab软件对AWG的传输特性进行了优化模拟,通过对聚合物衬底的热膨胀系数和聚合物波导的热光系数进行调控,得到了器件良好的绝热低偏振相关特性。测得AWG的中心波长为1550.918 nm,波长间隔为0.8 nm,插入损耗的信道变化范围是5.51 d B^10.62 d B,串扰大于20 d B,偏振漂移和温度变化分别是0.08 nm和0.03 nm/K。这种新技术十分适用于高性能多功能集成光路中,具有广阔的应用前景。     

阵列波导光栅线性系统理论分析及优化设计

运用线性系统理论分析了阵列波导光栅的模场特性 ,导出器件传输的数学模型即光栅方程。提出了设计阵列波导光栅阵列波导数M的新方法 ,该方法综合考虑了降低器件串扰以及收集发散光场的能力 ,与文献 [1 ]的方法相比简单且准确。分析了造成器件衍射损耗的原因 ,提出了降低器件衍射损耗的方法。给出了 8× 0 .8nm ,中心波长为 1 550nm的阵列波导光栅波分复用器的设计实例 ,并进行了数值模拟计算验证了文中所提方法的准确性。     

减少聚合物阵列波导光栅损耗的蒸气回溶技术

阵列波导光栅(AWG)器件是波分复用(WDM)系统的一种关键器件,其中,聚合物阵列波导光栅由于其制备工艺、器件集成等方面的优势而受到人们的日益关注。侧壁散射损耗是聚合物阵列波导光栅损耗的一个主要因素,减少阵列波导光栅波导的侧壁损耗对制备低损耗阵列波导光栅具有重要意义。一种蒸气回溶技术被用来有效地减少硅基聚合物阵列波导光栅的散射损耗,该技术的机理是饱和溶剂分子融入并软化波导侧壁,增加其流动性,从而降低波导侧壁粗糙度。用扫描电镜方法验证了用该技术能获得更光滑的波导侧壁。对直波导和阵列波导光栅样品进行回溶处理,测试后得到直波导的侧壁散射损耗减少2.1 dB/cm,阵列波导光栅中心信道和周边信道的插入损耗分别减少5.5 dB和6.7 dB,串扰减少2.5 dB。     

Effect of bending on characteristics of a polymer microring resonant wavelength multiplexer

Novel formulas of transfer functions are presented, some parameters are optimized, and bending effect of microrings on characteristics is analyzed for a polymer microring resonant wavelength multiplexer (MRRWM) around the central resonant wavelength of 1.55 μm with the wavelength spacing of 1.6 nm and with eight vertical output channels. Simulated results show that the bending of microrings causes the variation of the propagation constant, leads to the shift of the transmission spectrum, and increases the insertion loss. A method is proposed for eliminating the shift of the transmission spectrum and realizing the accurate demultiplexing of the device. The polymer MRRWM designed possesses the 3-dB bandwidth of 0.2 μm, insertion loss less than 0.57 dB, and crosstalk below −20 dB for every vertical output channel.     

Analysis for fabrication errors of arrayed waveguide grating multiplexers

Based on the transmission theory, parameter optimization is performed, and effects of fabrication errors on transmission characteristics are analyzed for a 33×33 polymer arrayed waveguide grating (AWG) multiplexer around the central wavelength of 1550.918 nm with the wavelength spacing of 0.8 nm. Simulated results show that fabrication errors result in the shift of the transmission spectrum, and lead to the increase of the crosstalk compared with the device theoretically designed. Furthermore, accumulation and compensation of fabrication errors are investigated. In order to realize the normal demultiplexing of the fabricated AWG device, the allowed fabrication errors are discussed.     

Simulation and optimization of a polymer directional coupler electro-optic switch with push-pull electrodes

Structural model and design technique are proposed for a polymer directional coupler electro-optic switch with rib waveguides and push-pull electrodes, of which the electric field distribution is analyzed by the conformal transforming method and image method. In order to get the minimum mode loss and the minimum switching voltage, the parameters of the waveguide and electrode are optimized, such as the core with, core thickness, buffer layer between the core and the electrode, coupling gap between the waveguides, electrode thickness, electrode width and electrode gap. Switching Characteristics are analyzed, which include the output power, insertion loss, and crosstalk. To realize normal switching function, the fabrication error, spectrum shift, and coupling loss between a single mode fiber (SMF) and the waveguide are discussed. Simulation results show that the coupling length is 3082 μm, push-pull switching voltage is 2.14 V, insertion loss is less than 1.17 dB, and crosstalk is less than −30 dB for the designed device.     

Large-effective-area ten-core fiber with cladding diameter of about 200 μm

A multicore fiber with two-pitch layout is proposed to overcome the trade-off between core number and a cladding diameter of a standard hexagonal layout with a single-core pitch. A fabricated ten-core fiber simultaneously realizes effective area of about 120 μm(2) at 1550 nm, small crosstalk, and cladding diameter of 204 μm. The crosstalk between the center core and outer cores is about 30 dB smaller than that between outer cores. The small crosstalk of the center core would help to keep the transmission quality of the center core at the same level as that of the outer cores.     

An Efficient Technique for Analyzing Transmission Characteristics of Arrayed Waveguide Grating Multiplexers

An efficient technique is presented for analyzing transmission characteristics of arrayed waveguide grating (AWG) multiplexers. As an example, calculations using this technique are performed for a polymer 33 × 33 AWG multiplexer around the central wavelength of 1.55 m with the wavelength spacing of 0.8 nm. Computed results show that this technique possesses high accuracy for analyzing the power profile, diffraction efficiency, transmission spectrum, free spectral range and crosstalk of the AWG multiplexer.     

Angle tolerant transmissive color filters exploiting metasurface incorporating hydrogenated amorphous silicon nanopillars

Angle tolerant transmissive subtractive color filters incorporating a metasurface exploiting hydrogenated amorphous silicon nanopillars(NPs) on a glass substrate were proposed and demonstrated. The achieved transmission efficiency ranged from 75% to 95% at off-resonance wavelengths. For an NP resonator, electric and magnetic-field distributions in conjunction with absorption cross-sections were investigated to confirm a resonant transmission dip, which is primarily governed by the absorption resulting from simultaneous excitation of magnetic and electric dipoles via Mie scattering. The proposed devices exhibit higher angular tolerance and lower crosstalk for the absorption spectra and, therefore, are applicable with photodetectors, image sensors, and imaging/display devices.     

光纤传输系统中互相位调制和受激拉曼散射串扰噪声的比较研究Ⅱ--级联传输系统

在具有级联光放大器的密集波分复用强度调制一直接检测光纤系统中，导出了包含互相位调制和受激拉曼散射共同作用的强度／相位矩阵表达式。在计算强度噪声谱的基础上，研究了互相位调制和受激拉曼散射的相互耦合并用于密集波分复用系统的噪声分析。在带色散补偿的密集波分复用级联光纤传输系统中(如80信道，信道间距50GHz)，受激拉曼散射引入的串扰噪声功率可能超过互相位调制。最后，给出了密集波分复用系统分析与设计的若干建议。     

Transmission performance of the SCM label in optical label switching networks

We have investigated the transmission performance of the label signal in the optical double sideband subcarrier multiplexing (DSB-SCM) label switching link and clarified that the degradation of the label signal results from the fiber chromatic dispersion and the incomplete filtering out of the payload carrier. Our theoretical results show that the DSB-SCM label can immune the fading effect, and the degradation mainly results from the crosstalk from the payload and the time shift of the code edge. The deep suppression of the optical carriers at the receiver can eliminate the crosstalk. The time shift of the code edges leads to the eye closure of the label codes and is independent of the code rate, but it does not degrade the label code with a low bit rate greatly, although it is serious for the label with a high bit rate and ultimately limits the transmission distance of the label. The simulation results validate our analysis very well. As we theoretically predict that the single sideband (SSB)-SCM can eliminate the time shift of the code edges and extend the transmission distance of the label signal.     

光纤传输系统中互相位调制和受激拉曼散射串扰噪声的比较研究Ⅰ--单级传输系统

在密集波分复用强度调制直接检测光纤系统中 ,导出了包含互相位调制和受激拉曼散射共同作用的强度/相位矩阵表达式。在计算强度噪声谱的基础上 ,研究了互相位调制和受激拉曼散射的相互耦合并用于密集波分复用系统的噪声分析。分析表明 ,受激拉曼散射主要引入低频串扰噪声 ,而互相位调制主要引入高频串扰噪声。相邻较近信道引入的串扰噪声主要来源于互相位调制 ,相邻较远信道引入的串扰噪声主要来源于受激拉曼散射。在单级传输 (无色散补偿 )系统中 ,系统性能一般首先受到互相位调制的限制